In this paper,crystallization kinetics of a series of ethylene-propylene copolymers prepared by living polymerization coordination catalyzed by a fluorinated bis(phenoxyimine)Ti catalyst(FI-EP copolymers)was studied,a...In this paper,crystallization kinetics of a series of ethylene-propylene copolymers prepared by living polymerization coordination catalyzed by a fluorinated bis(phenoxyimine)Ti catalyst(FI-EP copolymers)was studied,and was compared with that of ethylene-propylene copolymers prepared by a conventional Ziegler-Natta catalyst(ZN-EP copolymers).It is found that,the Avrami exponent and the crystallization rate constant of the FI-EP and ZN-EP copolymer show similar dependence on crystallization temperature,but t...展开更多
Ethylene-propylene block copolymer(EbP) is a vital component in impact polypropylene copolymer(IPC), yet its distribution in the multiphase composite material and how it influences the phase structure and the mechanic...Ethylene-propylene block copolymer(EbP) is a vital component in impact polypropylene copolymer(IPC), yet its distribution in the multiphase composite material and how it influences the phase structure and the mechanical properties are not well understood. In this work,four IPCs were investigated by atomic force microscopy-infrared(AFM-IR) to assess the phase compositions in situ, based on which in conjunction with the chain microstructure information obtained ex situ the distributions of the copolymer components were derived for each alloy. For the IPCs whose EbP comprises long P and long E segments, the EbP fraction was found to phase separate from the rubber and the PP matrix to form the cores of the disperse particles with the E-P segmented copolymer(EsP). In contrast, in the IPC with EbP composed of long P and short E segments, the EbP fraction formed an outer shell for the rubber particles with the cores comprising the EsP alone, and this IPC, containing a lower E comonomer content than its counterpart, exhibited both better impact resistance and higher flexural modulus. These results clarify how the chain structure of EbP governs the phase morphology in IPC, which in turn impacts the properties of the composite material.展开更多
Magnesium chloride supported vanadium/titanium bimetallic Ziegler-Natta catalysts with di-i-butyl phthalate as internal donor for copolymerization of ethylene and propylene were prepared. The effects of reaction tempe...Magnesium chloride supported vanadium/titanium bimetallic Ziegler-Natta catalysts with di-i-butyl phthalate as internal donor for copolymerization of ethylene and propylene were prepared. The effects of reaction temperature, ethylene/propylene molar ratio, aluminium/vanadium （Al/V） molar ratio and titanium/vanadium molar ratio on the catalytic activity were investigated. The molecular weight, molecular weight distribution, sequence composition and crystallinity of the products were measured by gel permeation chromatography, ^13C-NMR and differential scanning calorimetry analysis, respectively. In comparison to the vanadium and titanium catalysts, the bimetallic catalyst showed higher catalytic activity and better copolymerization performance. The obtained ethylene/propylene copolymers have high molecular weight （105）, broad molecular weight distribution, high propylene content with random or short blocked sequence structures （rErp = 1.919）, low melting temperatures and low crystallinities （Xc 〈 20%）.展开更多
A series of polypropylene（PP）/poly（ethylene-co-propylene） in-reactor alloys with different ethylene contents was prepared through a two-stage polymerization process using a MgCl2/TiCl4/diisobutyl phthalate/phospha...A series of polypropylene（PP）/poly（ethylene-co-propylene） in-reactor alloys with different ethylene contents was prepared through a two-stage polymerization process using a MgCl2/TiCl4/diisobutyl phthalate/phosphate tris-methylphenyl ester catalyst system. The ethylene content, particle shape, fractured surface, and glass-transition temperature（Tg） of the obtained PP in-reactor alloys were characterized by means of nuclear magnetic resonance, scanning electron microscopy（SEM）, and dynamic mechamcal analysis（DMA）. The ethylene content of the PP alloys increased from 2.34% to 26.69% when the propylene/ethylene feed ratio was increased from 66/34 to 54/46（molar ratio）. Morevoer, the increment in ethylene content increased the notched Izod impact strength of the resulting PP alloys. The impact strength of the PP alloy with an ethylene content of 26.69% was 55.8 kJ/m^2, which is 12.7 times that of isotactic polypropylene. The results of DMA and SEM analysis reveal that ethylene-propylene random copolymer（EPR） in the PP alloy has a low Tg of ca. -50℃ and a high interface compatibility with the PP matrix. The excellent impact performance of the PP alloy can be attributed to the uniform dispersal of EPR in the alloy particles and PP matrix.展开更多
基金the National Basic Research Program of China(No.2005CB623804).
文摘In this paper,crystallization kinetics of a series of ethylene-propylene copolymers prepared by living polymerization coordination catalyzed by a fluorinated bis(phenoxyimine)Ti catalyst(FI-EP copolymers)was studied,and was compared with that of ethylene-propylene copolymers prepared by a conventional Ziegler-Natta catalyst(ZN-EP copolymers).It is found that,the Avrami exponent and the crystallization rate constant of the FI-EP and ZN-EP copolymer show similar dependence on crystallization temperature,but t...
基金financially supported by the National Natural Science Foundation of China (No.52073277)the Science and Technology Department of Fujian Province (No.2020HZ06019)。
文摘Ethylene-propylene block copolymer(EbP) is a vital component in impact polypropylene copolymer(IPC), yet its distribution in the multiphase composite material and how it influences the phase structure and the mechanical properties are not well understood. In this work,four IPCs were investigated by atomic force microscopy-infrared(AFM-IR) to assess the phase compositions in situ, based on which in conjunction with the chain microstructure information obtained ex situ the distributions of the copolymer components were derived for each alloy. For the IPCs whose EbP comprises long P and long E segments, the EbP fraction was found to phase separate from the rubber and the PP matrix to form the cores of the disperse particles with the E-P segmented copolymer(EsP). In contrast, in the IPC with EbP composed of long P and short E segments, the EbP fraction formed an outer shell for the rubber particles with the cores comprising the EsP alone, and this IPC, containing a lower E comonomer content than its counterpart, exhibited both better impact resistance and higher flexural modulus. These results clarify how the chain structure of EbP governs the phase morphology in IPC, which in turn impacts the properties of the composite material.
基金supported by the Program for New Century Excellent Talents in Universities(NCET-07-0142)the Program for New Century Excellent Talents in Heilongjiang Provincial Universities(NCET-06-010)+1 种基金the National Natural Science Foundation of China(No.20972025)the Science Foundation of Tianjin University of Science & Technology(No.20090420)
文摘Magnesium chloride supported vanadium/titanium bimetallic Ziegler-Natta catalysts with di-i-butyl phthalate as internal donor for copolymerization of ethylene and propylene were prepared. The effects of reaction temperature, ethylene/propylene molar ratio, aluminium/vanadium （Al/V） molar ratio and titanium/vanadium molar ratio on the catalytic activity were investigated. The molecular weight, molecular weight distribution, sequence composition and crystallinity of the products were measured by gel permeation chromatography, ^13C-NMR and differential scanning calorimetry analysis, respectively. In comparison to the vanadium and titanium catalysts, the bimetallic catalyst showed higher catalytic activity and better copolymerization performance. The obtained ethylene/propylene copolymers have high molecular weight （105）, broad molecular weight distribution, high propylene content with random or short blocked sequence structures （rErp = 1.919）, low melting temperatures and low crystallinities （Xc 〈 20%）.
基金Supported by the National Natural Science Foundation of China（No.U1462124）.
文摘A series of polypropylene（PP）/poly（ethylene-co-propylene） in-reactor alloys with different ethylene contents was prepared through a two-stage polymerization process using a MgCl2/TiCl4/diisobutyl phthalate/phosphate tris-methylphenyl ester catalyst system. The ethylene content, particle shape, fractured surface, and glass-transition temperature（Tg） of the obtained PP in-reactor alloys were characterized by means of nuclear magnetic resonance, scanning electron microscopy（SEM）, and dynamic mechamcal analysis（DMA）. The ethylene content of the PP alloys increased from 2.34% to 26.69% when the propylene/ethylene feed ratio was increased from 66/34 to 54/46（molar ratio）. Morevoer, the increment in ethylene content increased the notched Izod impact strength of the resulting PP alloys. The impact strength of the PP alloy with an ethylene content of 26.69% was 55.8 kJ/m^2, which is 12.7 times that of isotactic polypropylene. The results of DMA and SEM analysis reveal that ethylene-propylene random copolymer（EPR） in the PP alloy has a low Tg of ca. -50℃ and a high interface compatibility with the PP matrix. The excellent impact performance of the PP alloy can be attributed to the uniform dispersal of EPR in the alloy particles and PP matrix.
