A probabilistic seismic loss assessment of RC high-rise(RCHR)buildings designed according to Eurocode 8 and located in the Southern Euro-Mediterranean zone is presented herein.The loss assessment methodology is based ...A probabilistic seismic loss assessment of RC high-rise(RCHR)buildings designed according to Eurocode 8 and located in the Southern Euro-Mediterranean zone is presented herein.The loss assessment methodology is based on a comprehensive simulation approach which takes into account ground motion(GM)uncertainty,and the random effects in seismic demand,as well as in predicting the damage states(DSs).The methodology is implemented on three RCHR buildings of 20-story,30-story and 40-story with a core wall structural system.The loss functions described by a cumulative lognormal probability distribution are obtained for two intensity levels for a large set of simulations(NLTHAs)based on 60 GM records with a wide range of magnitude(M),distance to source(R)and different site soil conditions(SS).The losses expressed in percent of building replacement cost for RCHR buildings are obtained.In the estimation of losses,both structural(S)and nonstructural(NS)damage for four DSs are considered.The effect of different GM characteristics(M,R and SS)on the obtained losses are investigated.Finally,the estimated performance of the RCHR buildings are checked to ensure that they fulfill limit state requirements according to Eurocode 8.展开更多
The depth adjustment factor for bending strength stated in Eurocode 5(EC5)is only applicable to timbers having a characteristic density below 700 kg/m^(3).However,most Malaysian timbers are hardwood,some with a charac...The depth adjustment factor for bending strength stated in Eurocode 5(EC5)is only applicable to timbers having a characteristic density below 700 kg/m^(3).However,most Malaysian timbers are hardwood,some with a characteristic density reaching above 700 kg/m^(3).Therefore,the objective of this study was to examine whether the depth adjustment factor stipulated in EC5 is valid for Malaysian hardwood timbers.Six timber species were selected for this study,namely Kapur(Dryobalanops C.F.Gaertn.),Kempas(Koompassia Maingay ex Benth.),Keruing(Dipterocarpus C.F.Gaertn.),Light red meranti(Shorea Roxb.ex C.F.Gaertn.),Geronggang(Cratoxylum Blume)and Balau(Shorea Roxb.ex C.F.Gaertn.).The determination of bending strength and characteristic density was conducted according to BS EN 408:2010 and BS EN 384:2016,respectively.A graph for mean bending strength vs.(150/h)was plotted for each timber species.The power function was selected to analyze the relationship between the two variables.The power of the regression equations varied depending on the characteristic density of the timber species.For species with a characteristic density below 700 kg/m^(3),such as Kapur,Keruing,and Light red meranti,the power was between 0.16 to 0.17.In contrast,for species having a characteristic density above 700 kg/m^(3),namely Kempas and Balau,the power was higher at 0.23 and 0.24,respectively.Geronggang was an exception to this pattern.These values are close to the depth adjustment factor given in EC5,which is 0.2.Based on the results,it can be suggested that the adjustment factor of 0.2 is also applicable to Malaysian hardwood timbers with a characteristic density above 700 kg/m^(3).展开更多
The Structural Eurocodes Systems, which are developed by the European Committee for Standardization (CEN), have come into trial use in the 28 countries of European Union (EU), and will lay a significant influence on t...The Structural Eurocodes Systems, which are developed by the European Committee for Standardization (CEN), have come into trial use in the 28 countries of European Union (EU), and will lay a significant influence on the development of the construction industry and on the international market of construction.展开更多
Since 2015, the Republic of Kazakhstan has a new regulatory framework for construction on the basis of Eurocode. Many new steel quality requirements have been introduced for steel structures. As a result, Kazakhstan’...Since 2015, the Republic of Kazakhstan has a new regulatory framework for construction on the basis of Eurocode. Many new steel quality requirements have been introduced for steel structures. As a result, Kazakhstan’s steel production almost ceased to be used in construction. Therefore, a series of studies is being carried out to determine the quality of local steel for compliance with the requirements of Eurocode 1993. Impact toughness testing was carried out on 126 samples of 8, 10, 20 mm thick structural steel produced by the “Arcelor-Mittal” company. The experimental study of impact toughness of KCV and KCU at a temperature of +20˚, -20˚, -40˚ degrees were conducted for seven types of structural steel, the most common in the Republic of Kazakhstan, on the experimental experimentation facility of the KazRDICA JSC. The ST RK STB EN 10045-1-2012 techniques were used. In each series of tests, 3 specimens were used. It has been established that in all cases the temperature requirements of Eurocode 1993 (National Annex to SP RK EN1993-1-1: 2005/2011*, Table НП.2*) are met. A regression relationship between the values of impact toughness and temperature was constructed. It has been established that construction steel produced in the Republic of Kazakhstan fully complies with the requirements of 1993 Eurocode. The studies on the dependence of Brinell hardness of steel on the impact toughness of steel at specified temperatures are performed. The correlation dependencies between the values of impact toughness and BH Brinell hardness have been obtained.展开更多
This article deals with the investigation of the effects of seismic impacts on the design and dimensioning of structures in South Kivu. The starting point is the observation of an ambivalence that can be observed in t...This article deals with the investigation of the effects of seismic impacts on the design and dimensioning of structures in South Kivu. The starting point is the observation of an ambivalence that can be observed in the province, namely the non-consideration of seismic action in the study of structures by both professionals and researchers. The main objective of the study is to show the importance of dynamic analysis of structures in South Kivu. It adopts a meta-analytical approach referring to previous researches on South Kivu and proposes an efficient and optimal method. To arrive at the results, we use Eurocode 7 and 8. In addition, we conducted static analysis using the Coulomb method and dynamic analysis using the Mononobe-Okabe method and compared the results. At Nyabibwe, the results showed that we have a deviation of 24.47% for slip stability, 12.038% for overturning stability and 9.677% for stability against punching through a weight wall.展开更多
文摘A probabilistic seismic loss assessment of RC high-rise(RCHR)buildings designed according to Eurocode 8 and located in the Southern Euro-Mediterranean zone is presented herein.The loss assessment methodology is based on a comprehensive simulation approach which takes into account ground motion(GM)uncertainty,and the random effects in seismic demand,as well as in predicting the damage states(DSs).The methodology is implemented on three RCHR buildings of 20-story,30-story and 40-story with a core wall structural system.The loss functions described by a cumulative lognormal probability distribution are obtained for two intensity levels for a large set of simulations(NLTHAs)based on 60 GM records with a wide range of magnitude(M),distance to source(R)and different site soil conditions(SS).The losses expressed in percent of building replacement cost for RCHR buildings are obtained.In the estimation of losses,both structural(S)and nonstructural(NS)damage for four DSs are considered.The effect of different GM characteristics(M,R and SS)on the obtained losses are investigated.Finally,the estimated performance of the RCHR buildings are checked to ensure that they fulfill limit state requirements according to Eurocode 8.
基金funded by Geran Penyelidikan Khas(GPK),(600-RMC/GPK 5/3(071/2020)).
文摘The depth adjustment factor for bending strength stated in Eurocode 5(EC5)is only applicable to timbers having a characteristic density below 700 kg/m^(3).However,most Malaysian timbers are hardwood,some with a characteristic density reaching above 700 kg/m^(3).Therefore,the objective of this study was to examine whether the depth adjustment factor stipulated in EC5 is valid for Malaysian hardwood timbers.Six timber species were selected for this study,namely Kapur(Dryobalanops C.F.Gaertn.),Kempas(Koompassia Maingay ex Benth.),Keruing(Dipterocarpus C.F.Gaertn.),Light red meranti(Shorea Roxb.ex C.F.Gaertn.),Geronggang(Cratoxylum Blume)and Balau(Shorea Roxb.ex C.F.Gaertn.).The determination of bending strength and characteristic density was conducted according to BS EN 408:2010 and BS EN 384:2016,respectively.A graph for mean bending strength vs.(150/h)was plotted for each timber species.The power function was selected to analyze the relationship between the two variables.The power of the regression equations varied depending on the characteristic density of the timber species.For species with a characteristic density below 700 kg/m^(3),such as Kapur,Keruing,and Light red meranti,the power was between 0.16 to 0.17.In contrast,for species having a characteristic density above 700 kg/m^(3),namely Kempas and Balau,the power was higher at 0.23 and 0.24,respectively.Geronggang was an exception to this pattern.These values are close to the depth adjustment factor given in EC5,which is 0.2.Based on the results,it can be suggested that the adjustment factor of 0.2 is also applicable to Malaysian hardwood timbers with a characteristic density above 700 kg/m^(3).
文摘The Structural Eurocodes Systems, which are developed by the European Committee for Standardization (CEN), have come into trial use in the 28 countries of European Union (EU), and will lay a significant influence on the development of the construction industry and on the international market of construction.
文摘Since 2015, the Republic of Kazakhstan has a new regulatory framework for construction on the basis of Eurocode. Many new steel quality requirements have been introduced for steel structures. As a result, Kazakhstan’s steel production almost ceased to be used in construction. Therefore, a series of studies is being carried out to determine the quality of local steel for compliance with the requirements of Eurocode 1993. Impact toughness testing was carried out on 126 samples of 8, 10, 20 mm thick structural steel produced by the “Arcelor-Mittal” company. The experimental study of impact toughness of KCV and KCU at a temperature of +20˚, -20˚, -40˚ degrees were conducted for seven types of structural steel, the most common in the Republic of Kazakhstan, on the experimental experimentation facility of the KazRDICA JSC. The ST RK STB EN 10045-1-2012 techniques were used. In each series of tests, 3 specimens were used. It has been established that in all cases the temperature requirements of Eurocode 1993 (National Annex to SP RK EN1993-1-1: 2005/2011*, Table НП.2*) are met. A regression relationship between the values of impact toughness and temperature was constructed. It has been established that construction steel produced in the Republic of Kazakhstan fully complies with the requirements of 1993 Eurocode. The studies on the dependence of Brinell hardness of steel on the impact toughness of steel at specified temperatures are performed. The correlation dependencies between the values of impact toughness and BH Brinell hardness have been obtained.
文摘This article deals with the investigation of the effects of seismic impacts on the design and dimensioning of structures in South Kivu. The starting point is the observation of an ambivalence that can be observed in the province, namely the non-consideration of seismic action in the study of structures by both professionals and researchers. The main objective of the study is to show the importance of dynamic analysis of structures in South Kivu. It adopts a meta-analytical approach referring to previous researches on South Kivu and proposes an efficient and optimal method. To arrive at the results, we use Eurocode 7 and 8. In addition, we conducted static analysis using the Coulomb method and dynamic analysis using the Mononobe-Okabe method and compared the results. At Nyabibwe, the results showed that we have a deviation of 24.47% for slip stability, 12.038% for overturning stability and 9.677% for stability against punching through a weight wall.
