Unveiling the dynamic instability mechanism of microstructure transformation in faceted oxide eutectic composite ceramics

Microstructure control is a great challenge in the high-temperature gradient directional solidification of eutectic composite ceramics due to the complex solidification behavior.Herein,the microstructure trans-formation of faceted Al_(2)O_(3)/Er_(3)Al_(5)O_(12) thermal emission eutectic composite ceramics is explored over wide ranges of compositions(13.5 mol%-22.5 mol%Er_(2)O_(3))and solidification rates(2-200μm/s).Entirely cou-pled eutectics with primary phases suppressed are fabricated and the coupled zone is broadened in a wide range of 15.5 mol%-22.5 mol%Er_(2)O_(3) at low solidification rates.The competitive growth between eutectic and dendrite is evaluated on the basis of the maximum interface temperature criterion.In ad-dition,the mechanisms of irregular eutectic spacing selection and adjustment under different solidifi-cation rates are revealed based on Magnin-Kurz model.A successful prediction of lamellar to rod-like eutectics is achieved associated with the dynamic instability of lamellar eutectic and the corresponding enlarged coexistence region is mapped based on the interface undercooling.According to the well mi-crostructure tailoring,the flexural strength of Al_(2)O_(3)/Er_(3)Al_(5)O_(12) eutectic composite ceramics has improved from 508 MPa up to 1800 MPa due to the refined eutectic spacing with low fluctuation.The eutectic composite ceramics show strong selective optical absorption and the intensity increases with the refin-ing microstructure.The as-designed Al_(2)O_(3)/Er_(3)Al_(5)O_(12) composites with microstructural tailoring have great potential as integrations of structural and functional materials.

Effect of seed orientations on crystallographic texture control in faceted Al2O3/YAG eutectic ceramic during directional solidification

Crystallographic texture control is a major challenge in directionally solidified multiphase eutectic ceramics with complex faceted growth characteristics.In this study,the Czochralski(CZ)technique is proposed to prepare eutectic single crystal ceramic with large size(30 mm×125 mm).A highly oriented and unique texture of Al_(2)O_(3)/Y_(3)Al_(5)O_(12)(YAG)eutectic ceramic is formed via the 112¯0Al_(2)O_(3) single crystal seed induction based on crystallographic orientation tailoring.The orientations of Al_(2)O_(3)/YAG eutectic are more strictly constrained by single crystal seed induction on the basis of the minimum interface energy principle,resulting in a defined single orientation relationship along the solidification direction.In particular,the single crystallographic orientation can be obtained in a short competitive solidification distance under the influence of epitaxial solidification from single crystal seed.Therefore,it has been confirmed that the orientations of 112¯0Al_(2)O_(3) and 111YAG are preferentially stabilized with the minimum under-cooling during directional solidification.Crystallographic orientation disturbances and instabilities due to polycrystalline crystal seed are avoided.Finally,the successful texture control inducted by 112¯0Al_(2)O_(3) single crystal seed can provide a promising orientation design pathway for faced oxide eutectic solidification.

Preparation of large-size Al_(2)O_(3)/GdAlO_(3)/ZrO_(2)ternary eutectic ceramic rod by laser directed energy deposition and its microstructure homogenization mechanism

Laser 3D printing based on melt growth has great potential in rapid preparation of Al_(2)O_(3)-based eutectic ce ramics.In this work,la rge-scale Al_(2)O_(3)/GdAlO_(3)/ZrO_(2)ternary eutectic ceramic rod with diameter of 4-5 mm and height higher than 250 mm was additively manufactured by laser directed energy deposition.Especially,heat treatment was applied to eliminate the microstructure heterogeneity in the as-deposited eutectic ceramic,and the microstructure homogenization mechanism was studied in depth.The results indicate that colonies and banded structures completely disappear after the heat treatment,producing a homogeneous network eutectic structure.The microstructure homogenization is revealed to experience three stages of discontinuous coarsening,continuous coarsening and microstructure coalescence.Additionally,it is found that the eutectic spacing linearly increases with the heat treatment time,meaning that the coarsening behavior of the laser 3D-printed Al_(2)O_(3)/GdAlO_(3)/ZrO_(2)eutectic ceramic satisfies well with the Graham-Kraft model.

Formation mechanism and roles of oxygen vacancies in melt-grown Al_(2)O_(3)/GdAlO_(3)/ZrO_(2) eutectic ceramic by laser 3D printing

Laser three-dimensional(3D)printing has become a significant technique to fabricate high-performance Al_(2)O_(3)-based eutectic ceramics based on melt growth.However,oxygen vacancies are inevitable crystal defects during this process,and their formation mechanism and roles in the as-deposited ceramics are still unclear.In this paper,Al_(2)O_(3)/GdAlO_(3)/ZrO_(2) ternary eutectic ceramics were prepared by laser 3D printing,and the formation mechanism of the oxygen vacancies was revealed by conducting a well-designed annealing experiment.In addition,the effects of the oxygen vacancies on the structure and mechanical property of the as-solidified eutectic ceramic were investigated.The formation of oxygen vacancies is revealed to be a result of the transfer of oxygen atoms from the oxide ceramic to the oxygen-deficient atmosphere by means of vacancy migration mechanism.Besides,the presence of oxygen vacancies has no obvious effects on crystalline structure and microstructure of the additively manufactured eutectic ceramic.However,the chemical bond property changes to some extent due to the formation of these crystal defects,which may affect the mechanical property of the as-deposited eutectic ceramic.It is found that the hardness decreases by 3.9%,and the fracture toughness increases by 13.3%after removing the oxygen vacancies.The results may provide a potential strategy to regulate the mechanical property of the oxide ceramic materials.