Understandings of the effect of hot deformation parameters close to the practical production line on grain refinement are crucial for enhancing both the strength and toughness of future rail steels.In this work,the au...Understandings of the effect of hot deformation parameters close to the practical production line on grain refinement are crucial for enhancing both the strength and toughness of future rail steels.In this work,the austenite dynamic recrystallization(DRX)behaviors of a eutectoid pearlite rail steel were studied using a thermo-mechanical simulator with hot deformation parameters frequently employed in rail production lines.The single-pass hot deformation results reveal that the prior austenite grain sizes(PAGSs)for samples with different deformation reductions decrease initially with an increase in deformation temperature.However,once the deformation temperature is beyond a certain threshold,the PAGSs start to increase.It can be attributed to the rise in DRX volume fraction and the increase of DRX grain with deformation temperature,respectively.Three-pass hot deformation results show that the accumulated strain generated in the first and second deformation passes can increase the extent of DRX.In the case of complete DRX,PAGS is predominantly determined by the deformation temperature of the final pass.It suggests a strategic approach during industrial production where part of the deformation reduction in low temperature range can be shifted to the medium temperature range to release rolling mill loads.展开更多
To improve competitiveness,the nation's railroads have increased the axle loads and speed of the trains.This has led to a rapid decrease in the life expectancy of premium rails through accelerated wear,rolling con...To improve competitiveness,the nation's railroads have increased the axle loads and speed of the trains.This has led to a rapid decrease in the life expectancy of premium rails through accelerated wear,rolling contact fatigue and fracture.To counter this effect,the railroads need rails that exhibit better performance in these areas.A research program has been initiated to study the microstructural aspects of near-eutectoid steels that would improve these properties.The first phase of the work was to carefully characterize the existing commercial rail steels in terms of pearlite interlamellar spacing,steel cleanliness and the presence of pro-eutectoid cementite on prior-austenite boundaries.These characterizations were then correlated with both mechanical properties and overall rail performance.The second phase of the program was to develop a better microstructure through control of composition,thermomechanical processing and cooling path.This was achieved through the use of laboratory-melted heats of experimental near-eutectoid compositions and a computer controlled MTS compression machine modified for axisymmetric compression testing and subsequent controlled cooling.The optimum processing route for these new steels has been determined,and pilot-scale heats have been melted,hot rolled and cooled using the information gained from the MTS investigations.The mechanical properties of these new steels have been determined and the rail performance tests are being conducted using laboratory-scale evaluation.Ultimately,these new rail steels will be tested under commercial conditions on the TTCI test track in Pueblo,Colorado.This paper will report on the alloy and processing design and resulting properties of the steels developed in this research program.Guidelines for future rail compositions and processing to obtain improved properties and performance will be presented.展开更多
基金financially supported by the National Natural Science Foundation of China(Nos.52293395 and 52293393)the Xiongan Science and Technology Innovation Talent Project of MOST,China(No.2022XACX0500)。
文摘Understandings of the effect of hot deformation parameters close to the practical production line on grain refinement are crucial for enhancing both the strength and toughness of future rail steels.In this work,the austenite dynamic recrystallization(DRX)behaviors of a eutectoid pearlite rail steel were studied using a thermo-mechanical simulator with hot deformation parameters frequently employed in rail production lines.The single-pass hot deformation results reveal that the prior austenite grain sizes(PAGSs)for samples with different deformation reductions decrease initially with an increase in deformation temperature.However,once the deformation temperature is beyond a certain threshold,the PAGSs start to increase.It can be attributed to the rise in DRX volume fraction and the increase of DRX grain with deformation temperature,respectively.Three-pass hot deformation results show that the accumulated strain generated in the first and second deformation passes can increase the extent of DRX.In the case of complete DRX,PAGS is predominantly determined by the deformation temperature of the final pass.It suggests a strategic approach during industrial production where part of the deformation reduction in low temperature range can be shifted to the medium temperature range to release rolling mill loads.
文摘To improve competitiveness,the nation's railroads have increased the axle loads and speed of the trains.This has led to a rapid decrease in the life expectancy of premium rails through accelerated wear,rolling contact fatigue and fracture.To counter this effect,the railroads need rails that exhibit better performance in these areas.A research program has been initiated to study the microstructural aspects of near-eutectoid steels that would improve these properties.The first phase of the work was to carefully characterize the existing commercial rail steels in terms of pearlite interlamellar spacing,steel cleanliness and the presence of pro-eutectoid cementite on prior-austenite boundaries.These characterizations were then correlated with both mechanical properties and overall rail performance.The second phase of the program was to develop a better microstructure through control of composition,thermomechanical processing and cooling path.This was achieved through the use of laboratory-melted heats of experimental near-eutectoid compositions and a computer controlled MTS compression machine modified for axisymmetric compression testing and subsequent controlled cooling.The optimum processing route for these new steels has been determined,and pilot-scale heats have been melted,hot rolled and cooled using the information gained from the MTS investigations.The mechanical properties of these new steels have been determined and the rail performance tests are being conducted using laboratory-scale evaluation.Ultimately,these new rail steels will be tested under commercial conditions on the TTCI test track in Pueblo,Colorado.This paper will report on the alloy and processing design and resulting properties of the steels developed in this research program.Guidelines for future rail compositions and processing to obtain improved properties and performance will be presented.