Comparative Study of Evaluation Indicators for Learning Cities and the Implications

With the development of society,more and more cities are participating in the initiative to build learning cities.Constructing an evaluation indicator system for learning cities to monitor the progress and promote their growth has become increasingly important.This paper analyzes the preliminary framework of the UNESCO Global Learning City Index and R3L+Quality Framework.The comparison is made from the aspects of design philosophy,criteria of indicator,and the cycle of evaluation process.The findings suggest that the construction of an evaluation indicator system should be focused more on the diversity of learning city development,the construction of an evaluation process cycle,and the significance of building cooperative networks.

Using the Delphi method to propose foods for special medical purposes health effect evaluation indicators

Objective:The Delphi method was used to propose health effect evaluation indicators to assess foods for special medical purposes(FSMPs).This lays the foundation for the formation of a big data model for human health testing,as well as a big data platform for the health and safety evaluation of special medical foods.Methods:The Delphi method was used to conduct two rounds of expert consultation on the constructed FSMP health effect evaluation indicators.Results:Ten major items were identified after two rounds of expert consultation.Among these,there were 10 primary entries,32 secondary entries,50 tertiary entries,and 28 quaternary entries.Conclusion:The complete list of evaluation indicators contains 10 entries,which can comprehensively and systematically monitor adverse reactions to the use of FSMPs.The present findings lay the foundation for a big data platform to evaluate the health and safety of special foods.

Evaluation Indicators and Extraction Method for Pitting Corrosion of Structural Steel

A set of evaluation indicators based on corrosion ratio in theory for assessing the extent of pitting corrosion and performance reduction are proposed. In order to quantify the morphology of pitting corrosion and extract the evaluation indicators,the 3D profile data obtained by pitting morphology measurement are imported into a special written program to automatically determine the location of each corrosion pit and distill any desired data pertinent to the pitting morphology. The results show that this method seems to be effective to analyze the corroded surface and characterize the pitting morphology.

Evaluation indices of sour flavor for apple fruit and grading standards

In order to establish grading standards of evaluation indices for sour flavor of apples, 10 indices of samples from 106 apple cultivars were tested, including： malic acid（Mal）, oxalic acid（Oxa）, citric acid（Cit）, lactic acid（Lac）, succinic acid（Suc）, fumaric acid（Fum）, total organic acids（To A, the sum of the six organic acids tested）, titratable acid（TiA）, acidity value（AcV）, and pH value. For most of the cultivars studied（85.8%）, the order of the organic acid contents in apples was Mal〉Oxa〉Cit〉Lac〉Suc〉Fum. Mal was the dominant organic acid, on average, accounting for 94.5% of To A. Among the 10 indices, the dispersion of pH value was the smallest with a coefficient of variation of only 8.2%, while the coefficients of variation of the other nine indices were larger, ranging between 31 and 66%. There were significant linear relationships between Mal and two indices（ToA and AcV） as well as between ToA and AcV. There were significant logarithmic relationships between pH value and four indices： Mal, TiA, ToA, and AcV. All the equations had very high fitting accuracy and can be used to accurately predict related indices. According to this study, Mal, ToA, and AcV of apple were normally distributed, TiA was close to normally distributed, whereas pH value had a skewed distribution. Using the fitted normal distribution curves, the grading standards of Mal, TiA, ToA, and AcV were established. The grading node values of pH value were obtained using the logarithmic relationship between pH value and Mal. The grading standards of these five indices can be used to evaluate the sour flavor of apple. This study provides a scientific basis for evaluating apple flavor and selecting apple cultivars.

The Main Evaluation Indicators for the Quality of Fruit Radish

The aim of this study was to establish a scientific evaluation system for fruit radish quality. 8 quality indicators were measured for23 varieties,such as Meinong,Qiaotouqing and Chunbulao. The indicators included root weight,root shape index,water content,crispness,soluble solids,crude fiber,isothiocyanate and vitamin C. These data were analyzed by variation correlation analysis,principal component analysis and system cluster analysis. 23 varieties of fruit radish were analyzed by variation correlation; 8 indicators were compressed into 6 integrated variables using principal component analysis. Finally,the main evaluation indicators of fruit radish were determined by using cluster analysis and correlation analysis. The results indicated that the range of variation coefficient was from 1. 64%-89. 99%. Water content,crispness,soluble solids,crude fiber,isothiocyanate were the important components of fruit radish quality,playing a major role in the quality. These 8indicators were closely related and relatively independent. Water content was significantly and positively correlated with crispness; soluble solids and crude fiber were significantly and negatively related to vitamin C; crispness was significantly and positively correlated with crude fiber and vitamin C. Based on the above results,4 representative indicators were used for evaluating fruit radish quality,that is water content,crispness,soluble solids,crude fiber,which could reflect the most information of fruit radish quality.

Standards System and Evaluation Indicators System for Environmental Protection Products

Environmental protection products and equipment are important substance basis and insurance which provide supporting for to the realization of the strategic objective of reduced energy use and emissions while improving the resource economy ＆ environmental kindly society building, as well as the sustainable development economy and environment in a sustainable fashion. Here, the framework of the standards system and evaluation indicators system for environmental protection products are described based on the present deficiencies in independent innovation, lower levels of standardization, and poor operating effectiveness of such equipment in China with a goal of forcing the development of standardization, seriation and currency used in the environmental protection industry. The results presented here should serve as a reference for the promotion of quality and effectiveness in environmental protection products and equipments.

A study of CALIS evaluation indicator system for digital resources and its practical application considerations

Based on our theoretical studies and practical experience related to the digital resource evaluation activities,which were undertaken jointly by CALIS and Peking University Library,this paper discusses the targeted object,content,the structure and the attributes of CALIS evaluation indicator system for digital resources.We also offer a detailed guideline for professional practice in terms of using this particular indicator system to evaluate the viability and the collection strength of a given digital library.

Research on the Construction of Drug Inspection Evaluation Indicator System

Objective To study a way to establish a drug inspection evaluation system in China.Methods Through literature research,behavioral event interviews,Delphi expert interviews,and other methods,the theory of“threedimensional quality structure model”was used to extract,screen,and construct a set of evaluation indicator system for drug inspection,including 3 first-level indicators,11 second-level indicators,and 47 third-level indicators.Results and Conclusion An effective management tool to evaluate the quality of drug inspection has not yet been formed in China.According to the requirements of laws,regulations,and departmental rules,combined with the mature drug inspection mechanism of international drug regulatory agencies or organizations and the international quality management theory,some management tools are put forward to improve the quality system of drug supervision.

Comprehensive Evaluation of Distributed PV Grid-Connected Based on Combined Weighting Weights and TOPSIS-RSR Method

To effectively quantify the impact of distributed photovoltaic(PV)access on the distribution network,this paper proposes a comprehensive evaluation method of distributed PV grid connection combining subjective and objective combination of assignment and technique for order preference by similarity to an ideal solution(TOPSIS)—rank sum ratio(RSR)(TOPSIS-RSR)method.Based on the traditional distribution network evaluation system,a comprehensive evaluation system has been constructed.It fully considers the new development requirements of distributed PV access on the environmental friendliness and absorptive capacity of the distribution grid and comprehensively reflects the impact of distributed PV grid connection.The analytic hierarchy process(AHP)was used to determine the subjective weights of the primary indicators,and the Spearman consistency test was combined to determine the weights of the secondary indicators based on three objective assignment methods.The subjective and objective combination weights of each assessment indicator were calculated through the principle of minimum entropy.Calculate the distance between the indicators to be evaluated and the positive and negative ideal solutions,the relative closeness ranking,and qualitative binning by TOPSIS-RSR method to obtain the comprehensive evaluation results of different scenarios.By setting up different PV grid-connected scenarios and utilizing the IEEE33 node simulation algorithm,the correctness and effectiveness of the proposed subject-object combination assignment and integrated assessment method are verified.

A study on performance influences of airfoil aerodynamic parameters and evaluation indicators for the roughness sensitivity on wind turbine blade

The roughness increase on horizontal axis wind turbine(HAWT) blade surface,especially on the leading edge,can lead to an aerodynamic performance degradation of blade and power output loss of HAWT,so roughness sensitivity is an important factor for the HAWT blade design.However,there is no criterion for evaluating roughness sensitivity of blade currently.In this paper,the performance influences of airfoil aerodynamic parameters were analyzed by the blade element momentum(BEM) method and 1.5 MW wind turbine blade.It showed that airfoil lift coefficient was the key parameter to the power output and axial thrust of HAWT.Moreover,the evaluation indicators of roughness sensitivity for the different spanwise airfoils of the pitch-regulated HAWT blade were proposed.Those respectively were the lift-to-drag ratio and lift coefficient without feedback system,the maximum lift-to-drag ratio and design lift coefficient with feedback system for the airfoils at outboard section of blade,and lift coefficient without feedback,maximum lift coefficient with feedback for the airfoils at other sections under the pitch-fixed and variable-speed operation.It is not necessary to consider the roughness when HWAT can be regulated to the rated power output by the pitch-regulated and invariable-speed operation.

The impacts of evaluation indices and normalization methods on E-TOPSIS optimization of return vent height for an impinging jet ventilation system

Stratified air distribution(STRAD)systems have been intensively investigated in recent decades for their energy-saving potential and good indoor air quality performance.However,the evaluation indices used to optimize STRAD systems and the normalization methods for weight calculation vary from one research to another.This study aims to investigate the impacts of evaluation indices on the optimal return vent height of a room cooled by an impinging jet ventilation system(one type of STRAD system).The effects of several widely used normalization methods(i.e.,vector normalization,sum normalization,min-max normalization,and no normalization)on indices weights are investigated.The evaluation indices are cooling coil load(Q_(coil)),energy-saving potential(ΔQ_(coil)),mean age of air(MAA),CO_(2) mass fraction,temperature difference between the head and ankles(ΔT_(0.1-1.1)),predicted mean vote(PMV),predicted percentage of dissatisfied(PPD),and draft rate(DR).The multi-criteria optimization method is the entropy-based technique for order preference by similarity to ideal solution(E-TOPSIS).As a result,the min-max normalization method evens the weight of each index and results in unreasonable relative weights.Consequently,the raw matrix(i.e.,the normalization is omitted)is suggested for weight calculation.Among these indices,ΔT_(0.1-1.1) and PPD play critical roles.WithoutΔT_(0.1-1.1),the optimal return vent height changes from mid-level to near-floor,while without PPD,it changes to near-ceiling.Another important result is that the Q_(coil) plays the most trivial role,followed by MAA and DR.Therefore,the optimal return vent height is not determined by energy-saving performance but by performances of thermal comfort.

Performance evaluation indicator system for the implementation of essential drug system in community health service institutions

Objective:This research aims to develop a more scientific and reasonable performance evaluation indicator system for the implementation of an essential drug system in community health service institutions.Methods:The Delphi method was used to establish an indicator system based on three rounds of expert consultations,and the fuzzy comprehensive evaluation method was used to determine the weights of the indicators.Results:The participation in the three rounds of consultations were 100%(10/10),90%(18/20),and 85%(17/20),which showed that the experts had real enthusiasm for participating in this research.The authority coefficients of the first-,second-,and third-level indicators were 0.75,0.76,and 0.76,respectively,which showed that the consultation results were dependable.The concordance coefficients of the second and third rounds were 0.489 and 0.487,respectively(P<0.001),indicating that the expert opinions were highly consistent.The performance evaluation indicator system consisted of three first-level indicators(supporting,implementation,and effect indicators),nine second-level indicators,and 21 third-level indicators.Conclusion:In this new performance evaluation indicator system,the selected experts were representative,the consultation results were dependable,the constructed evaluation indicator system was reasonable,and the setting of weights was scientific.

A procedural study of building up a performance evaluation indicator system of intellectual property protection

The intellectual property protection, whether judicial or administrative, is evaluated through a performance evaluation indicator system. To building up such a system, we must follow certain working procedures which usually consist of four steps： to determine the performance objectives, to design the structure of indicator system, to specify the indicators and to set up the weight of indicators. Each step plays a different role in performance evaluation indicator system and has its own impact on the realization of performance evaluation objectives respectively. So the scientifically building up a performance evaluation indicator system is the key to determine whether the intellectual property is protected well or not.

Entropy method for determination of weight of evaluating indicators in fuzzy synthetic evaluation for water quality assessment

Considering the difficulty of fuzzy synthetic evaluation method in calculation of the multiple factors and ignorance of the relationship among evaluating objects, a new weight evaluation process using entropy method was introduced. This improved method for determination of weight of the evaluating indicators was applied in water quality assessment of the Three Gorges reservoir area. The results showed that this method was favorable for fuzzy synthetic evaluation when there were more than one evaluating objects. One calculation was enough for calculating every monitoring point. Compared with the original evaluation method, the method predigested the fuzzy synthetic evaluation process greatly and the evaluation results are more reasonable.

A risk assessment method considering risk attributes and work safety informational needs and its application

The technological revolution has spawned a new generation of industrial systems,but it has also put forward higher requirements for safety management accuracy,timeliness,and systematicness.Risk assessment needs to evolve to address the existing and future challenges by considering the new demands and advancements in safety management.The study aims to propose a systematic and comprehensive risk assessment method to meet the needs of process system safety management.The methodology first incorporates possibility,severity,and dynamicity(PSD)to structure the“51X”evaluation indicator system,including the inherent,management,and disturbance risk factors.Subsequently,the four-tier(risk point-unit-enterprise-region)risk assessment(RA)mathematical model has been established to consider supervision needs.And in conclusion,the application of the PSD-RA method in ammonia refrigeration workshop cases and safety risk monitoring systems is presented to illustrate the feasibility and effectiveness of the proposed PSD-RA method in safety management.The findings show that the PSD-RA method can be well integrated with the needs of safety work informatization,which is also helpful for implementing the enterprise's safety work responsibility and the government's safety supervision responsibility.

A review of the development of asphalt foaming technology

To comprehensively assess the current state-of-art in asphalt foaming technology, the following four key aspectshave been reviewed systematically: foaming principles, test methods, evaluation indicators, and influencing factors.Key findings reveal that asphalt foaming was primarily driven by the vaporization of water, with deteriorationprocesses including bubble collapse and liquid film drainage. However, the current understanding of asphaltfoaming principles remains limited, primarily due to difficulties in capturing and precisely measuring its microscopic behaviors during asphalt foaming process. Volume changes provided an intuitive means to evaluate theexpansion capacity of asphalt and its foaming stability. Bubble evolution characteristics of foamed asphalt offeredpromising insights into its foaming performance. Traditional ruler and stopwatch-based assessments were beingsuperseded by automated techniques like laser and ultrasonic ranging. Nevertheless, the current measuringequipment still lacks the capability to comprehensively evaluate the foaming effect of asphalt across various dimensions. Asphalt temperature and foaming water consumption significantly affected asphalt foaming performance, and the inclusion of foaming agents typically led to a notable increase in the half life of foamed asphalt.However, the interaction between foaming agents and asphalt, as well as the underlying mechanisms affecting thefoaming effect, are still unclear and require further exploration. Future research should primarily focus on thecorrelation between asphalt foaming effect and mixture performance, aiming to guide the practical engineeringapplication of foamed asphalt mixtures and enlarge the advantages of such low-emission and sustainable mixtures.

Planning Evaluation on Spatial Layout of Livestock and Poultry Farms

The problems of spatial layout in livestock and poultry farms were discussed, and the development status of the planning evaluation on the spatial layout in recent years was systematically reviewed. The research progress in planning evaluation systems and methods was mainly intro- duced. And some opinions were proposed to solve these problems.

Concept and evaluation method of equipment system of systems contribution rate

To scientifically evaluate the equipment system of systems(SoS)contribution rate,a contribution rate calculation method based on a structural equation model(SEM)is proposed in this paper.The connotation and evaluation process of the equipment SoS contribution rate were redefined and standardized.To solve the existing problems in the application of the original contribution rate formula,a modified contribution rate calculation formula is proposed.Finally,the contribution rate evaluation index was divided into latent and explicit variables.The measurement and structural equations in the SEM were used to calculate and analyze the latent variables.The simulation results show that the number of defense lines of air defense weapon equipment has a greater impact on the linear configuration than the group configuration.When the number of K-type air defense weapons is sufficient,the two-layer linear configuration should be adopted with 20 air defense weapon systems.When the number of K-type air defense weapons is insufficient,the single-layer group configuration should be adopted with 12 air defense weapon systems.

Dynamic evaluation of water resources carrying capacity of the Dianchi Lake Basin in 2005-2015,based on DSPERM framework model and simulated annealing-projection pursuit model

With the intensi fed impact of human activities,most lakes have been severely disturbed and the lake ecosystem has been seriously damaged,which exerted a great impact on the living envi-ronment of human beings in the lake basins.The health of the lake ecosystem has gradually become one of the hot issues in recent years.In this study,the water resources carrying capacity(WRCC)was used to reveal the chain rel ationship between human activities and water environ-ment in the economic dewelopment of the Dianchi Lake Basin in Kunming City of China during 2005-2015.Specifically,we chose 25 ewaluation indicators related to the water environment and socialeconomic activities,classified them into six subsystems,Le,the driwing force subsystem(D),the water resources si tuation and consumption subsystem(S),the water resources pressure subsystem(P),the water environmental situation subsystem(E),the response subsystem(R),and the management subsystem(M),and built a comprehensive assessment system-DSPERM frame-work model.Si mulated annealing-projection pursuit model which reflects the structure or feature of high-dimensional data was adopted to calculate the WRCC of the Dianchi Lake Basin during 2005-2015 by weighting each evaluation indicator and each subsystem of the DSPERM frame work model.The resuls show that the WRCC of the Dlanchi Lake Basin was in level II(medium carying capacity)from 2005 to 2012.Since 2013,the WRCC has been at level II(strong carying capacity),and from 2005 to 2015,it showed a gradual upward trend.The evaluation indicators of each subsystem varied greatly and exhibited different development trends.The indicators of the water resources pressure subsystem had the greatest impact on the WRCC,followed by the in-dicators of the water environmental si tuation subsystem and the water resources situation and consumption subsystem.We recommend that the DSPERM framework model and the simulated anneal ing-projection pursuit model constructed in this work can be used to analyze the dynamic changes of the WRCC over the years.They have the advantages of practicability and feasibilty,and can provide the basis for the scienti fic decision-making and comprehensive management of regional water environment planning.

Research on the Evaluation System of National Standards

This paper presents an evaluation system of national standard levels composed of certain indicators and their respective weights.The goal of quantitative evaluation of national standards was achieved by experts provided a reasonable basis to evaluate the national standard lecel.It will also play an important role in regulating standards and improving the national standards level.