Comprehensive Evaluation of Distributed PV Grid-Connected Based on Combined Weighting Weights and TOPSIS-RSR Method

To effectively quantify the impact of distributed photovoltaic(PV)access on the distribution network,this paper proposes a comprehensive evaluation method of distributed PV grid connection combining subjective and objective combination of assignment and technique for order preference by similarity to an ideal solution(TOPSIS)—rank sum ratio(RSR)(TOPSIS-RSR)method.Based on the traditional distribution network evaluation system,a comprehensive evaluation system has been constructed.It fully considers the new development requirements of distributed PV access on the environmental friendliness and absorptive capacity of the distribution grid and comprehensively reflects the impact of distributed PV grid connection.The analytic hierarchy process(AHP)was used to determine the subjective weights of the primary indicators,and the Spearman consistency test was combined to determine the weights of the secondary indicators based on three objective assignment methods.The subjective and objective combination weights of each assessment indicator were calculated through the principle of minimum entropy.Calculate the distance between the indicators to be evaluated and the positive and negative ideal solutions,the relative closeness ranking,and qualitative binning by TOPSIS-RSR method to obtain the comprehensive evaluation results of different scenarios.By setting up different PV grid-connected scenarios and utilizing the IEEE33 node simulation algorithm,the correctness and effectiveness of the proposed subject-object combination assignment and integrated assessment method are verified.

Concept and evaluation method of equipment system of systems contribution rate

To scientifically evaluate the equipment system of systems(SoS)contribution rate,a contribution rate calculation method based on a structural equation model(SEM)is proposed in this paper.The connotation and evaluation process of the equipment SoS contribution rate were redefined and standardized.To solve the existing problems in the application of the original contribution rate formula,a modified contribution rate calculation formula is proposed.Finally,the contribution rate evaluation index was divided into latent and explicit variables.The measurement and structural equations in the SEM were used to calculate and analyze the latent variables.The simulation results show that the number of defense lines of air defense weapon equipment has a greater impact on the linear configuration than the group configuration.When the number of K-type air defense weapons is sufficient,the two-layer linear configuration should be adopted with 20 air defense weapon systems.When the number of K-type air defense weapons is insufficient,the single-layer group configuration should be adopted with 12 air defense weapon systems.

Research on the Evaluation System of National Standards

This paper presents an evaluation system of national standard levels composed of certain indicators and their respective weights.The goal of quantitative evaluation of national standards was achieved by experts provided a reasonable basis to evaluate the national standard lecel.It will also play an important role in regulating standards and improving the national standards level.

Construction of an evaluation system for information openness of local governments

Evaluating government openness is important in monitoring government performance and promoting government transparency. Therefore, it is necessary to develop an evaluation system for information openness of local governments. In order to select evaluation indicators, we conducted a content analysis on current evaluation systems constructed by researchers and local governments and the materials of a case study on a local government. This evaluation system is composed of 5 first-tier indicators, 30 secondtier indicators and 69 third-tier indicators. Then Delphi Method and Analytic Hierarchy Process(AHP) Method are adopted to determine the weight of each indicator. At last, the practicability of the system is tested by an evaluation of the local government of Tianjin Binhai New Area, which has been undergoing administrative reform and attempting to reinvent itself in the past 5 years.

Construction of an evaluation system for the service capabilities of government to business (G2B) web portals

On the basis of analyzing both domestic and foreign evaluation systems for the e-government and also taking into account of the current situation of government portals in urban centers,the paper is aimed to construct an evaluation system primarily for the measurement of the service capability of business-oriented G2B portals of local governments in general and those G2B portals of the new development zones in particular.This system is composed of 6 first tier indicators,18 second tier indicators and 90 third tier indicators.And the weight of each indicator is determined by Delphi Method and Analytic Hierarchy Process(AHP) Method.Subsequently,we used this system to evaluate the government portals of Tianjin Binhai New Area and Shanghai Pudong New Area and proved to have the desired practicability.

A procedural study of building up a performance evaluation indicator system of intellectual property protection

The intellectual property protection, whether judicial or administrative, is evaluated through a performance evaluation indicator system. To building up such a system, we must follow certain working procedures which usually consist of four steps： to determine the performance objectives, to design the structure of indicator system, to specify the indicators and to set up the weight of indicators. Each step plays a different role in performance evaluation indicator system and has its own impact on the realization of performance evaluation objectives respectively. So the scientifically building up a performance evaluation indicator system is the key to determine whether the intellectual property is protected well or not.

Standards System and Evaluation Indicators System for Environmental Protection Products

Environmental protection products and equipment are important substance basis and insurance which provide supporting for to the realization of the strategic objective of reduced energy use and emissions while improving the resource economy ＆ environmental kindly society building, as well as the sustainable development economy and environment in a sustainable fashion. Here, the framework of the standards system and evaluation indicators system for environmental protection products are described based on the present deficiencies in independent innovation, lower levels of standardization, and poor operating effectiveness of such equipment in China with a goal of forcing the development of standardization, seriation and currency used in the environmental protection industry. The results presented here should serve as a reference for the promotion of quality and effectiveness in environmental protection products and equipments.

A study of CALIS evaluation indicator system for digital resources and its practical application considerations

Based on our theoretical studies and practical experience related to the digital resource evaluation activities,which were undertaken jointly by CALIS and Peking University Library,this paper discusses the targeted object,content,the structure and the attributes of CALIS evaluation indicator system for digital resources.We also offer a detailed guideline for professional practice in terms of using this particular indicator system to evaluate the viability and the collection strength of a given digital library.

Using the Delphi method to propose foods for special medical purposes health effect evaluation indicators

Objective:The Delphi method was used to propose health effect evaluation indicators to assess foods for special medical purposes(FSMPs).This lays the foundation for the formation of a big data model for human health testing,as well as a big data platform for the health and safety evaluation of special medical foods.Methods:The Delphi method was used to conduct two rounds of expert consultation on the constructed FSMP health effect evaluation indicators.Results:Ten major items were identified after two rounds of expert consultation.Among these,there were 10 primary entries,32 secondary entries,50 tertiary entries,and 28 quaternary entries.Conclusion:The complete list of evaluation indicators contains 10 entries,which can comprehensively and systematically monitor adverse reactions to the use of FSMPs.The present findings lay the foundation for a big data platform to evaluate the health and safety of special foods.

A risk assessment method considering risk attributes and work safety informational needs and its application

The technological revolution has spawned a new generation of industrial systems,but it has also put forward higher requirements for safety management accuracy,timeliness,and systematicness.Risk assessment needs to evolve to address the existing and future challenges by considering the new demands and advancements in safety management.The study aims to propose a systematic and comprehensive risk assessment method to meet the needs of process system safety management.The methodology first incorporates possibility,severity,and dynamicity(PSD)to structure the“51X”evaluation indicator system,including the inherent,management,and disturbance risk factors.Subsequently,the four-tier(risk point-unit-enterprise-region)risk assessment(RA)mathematical model has been established to consider supervision needs.And in conclusion,the application of the PSD-RA method in ammonia refrigeration workshop cases and safety risk monitoring systems is presented to illustrate the feasibility and effectiveness of the proposed PSD-RA method in safety management.The findings show that the PSD-RA method can be well integrated with the needs of safety work informatization,which is also helpful for implementing the enterprise's safety work responsibility and the government's safety supervision responsibility.

A review of the development of asphalt foaming technology

To comprehensively assess the current state-of-art in asphalt foaming technology, the following four key aspectshave been reviewed systematically: foaming principles, test methods, evaluation indicators, and influencing factors.Key findings reveal that asphalt foaming was primarily driven by the vaporization of water, with deteriorationprocesses including bubble collapse and liquid film drainage. However, the current understanding of asphaltfoaming principles remains limited, primarily due to difficulties in capturing and precisely measuring its microscopic behaviors during asphalt foaming process. Volume changes provided an intuitive means to evaluate theexpansion capacity of asphalt and its foaming stability. Bubble evolution characteristics of foamed asphalt offeredpromising insights into its foaming performance. Traditional ruler and stopwatch-based assessments were beingsuperseded by automated techniques like laser and ultrasonic ranging. Nevertheless, the current measuringequipment still lacks the capability to comprehensively evaluate the foaming effect of asphalt across various dimensions. Asphalt temperature and foaming water consumption significantly affected asphalt foaming performance, and the inclusion of foaming agents typically led to a notable increase in the half life of foamed asphalt.However, the interaction between foaming agents and asphalt, as well as the underlying mechanisms affecting thefoaming effect, are still unclear and require further exploration. Future research should primarily focus on thecorrelation between asphalt foaming effect and mixture performance, aiming to guide the practical engineeringapplication of foamed asphalt mixtures and enlarge the advantages of such low-emission and sustainable mixtures.

Entropy method for determination of weight of evaluating indicators in fuzzy synthetic evaluation for water quality assessment

Considering the difficulty of fuzzy synthetic evaluation method in calculation of the multiple factors and ignorance of the relationship among evaluating objects, a new weight evaluation process using entropy method was introduced. This improved method for determination of weight of the evaluating indicators was applied in water quality assessment of the Three Gorges reservoir area. The results showed that this method was favorable for fuzzy synthetic evaluation when there were more than one evaluating objects. One calculation was enough for calculating every monitoring point. Compared with the original evaluation method, the method predigested the fuzzy synthetic evaluation process greatly and the evaluation results are more reasonable.

Evaluation Indicators and Extraction Method for Pitting Corrosion of Structural Steel

A set of evaluation indicators based on corrosion ratio in theory for assessing the extent of pitting corrosion and performance reduction are proposed. In order to quantify the morphology of pitting corrosion and extract the evaluation indicators,the 3D profile data obtained by pitting morphology measurement are imported into a special written program to automatically determine the location of each corrosion pit and distill any desired data pertinent to the pitting morphology. The results show that this method seems to be effective to analyze the corroded surface and characterize the pitting morphology.

Evaluation indices of sour flavor for apple fruit and grading standards

In order to establish grading standards of evaluation indices for sour flavor of apples, 10 indices of samples from 106 apple cultivars were tested, including： malic acid（Mal）, oxalic acid（Oxa）, citric acid（Cit）, lactic acid（Lac）, succinic acid（Suc）, fumaric acid（Fum）, total organic acids（To A, the sum of the six organic acids tested）, titratable acid（TiA）, acidity value（AcV）, and pH value. For most of the cultivars studied（85.8%）, the order of the organic acid contents in apples was Mal〉Oxa〉Cit〉Lac〉Suc〉Fum. Mal was the dominant organic acid, on average, accounting for 94.5% of To A. Among the 10 indices, the dispersion of pH value was the smallest with a coefficient of variation of only 8.2%, while the coefficients of variation of the other nine indices were larger, ranging between 31 and 66%. There were significant linear relationships between Mal and two indices（ToA and AcV） as well as between ToA and AcV. There were significant logarithmic relationships between pH value and four indices： Mal, TiA, ToA, and AcV. All the equations had very high fitting accuracy and can be used to accurately predict related indices. According to this study, Mal, ToA, and AcV of apple were normally distributed, TiA was close to normally distributed, whereas pH value had a skewed distribution. Using the fitted normal distribution curves, the grading standards of Mal, TiA, ToA, and AcV were established. The grading node values of pH value were obtained using the logarithmic relationship between pH value and Mal. The grading standards of these five indices can be used to evaluate the sour flavor of apple. This study provides a scientific basis for evaluating apple flavor and selecting apple cultivars.

Planning Evaluation on Spatial Layout of Livestock and Poultry Farms

The problems of spatial layout in livestock and poultry farms were discussed, and the development status of the planning evaluation on the spatial layout in recent years was systematically reviewed. The research progress in planning evaluation systems and methods was mainly intro- duced. And some opinions were proposed to solve these problems.

Dynamic evaluation of water resources carrying capacity of the Dianchi Lake Basin in 2005-2015,based on DSPERM framework model and simulated annealing-projection pursuit model

With the intensi fed impact of human activities,most lakes have been severely disturbed and the lake ecosystem has been seriously damaged,which exerted a great impact on the living envi-ronment of human beings in the lake basins.The health of the lake ecosystem has gradually become one of the hot issues in recent years.In this study,the water resources carrying capacity(WRCC)was used to reveal the chain rel ationship between human activities and water environ-ment in the economic dewelopment of the Dianchi Lake Basin in Kunming City of China during 2005-2015.Specifically,we chose 25 ewaluation indicators related to the water environment and socialeconomic activities,classified them into six subsystems,Le,the driwing force subsystem(D),the water resources si tuation and consumption subsystem(S),the water resources pressure subsystem(P),the water environmental situation subsystem(E),the response subsystem(R),and the management subsystem(M),and built a comprehensive assessment system-DSPERM frame-work model.Si mulated annealing-projection pursuit model which reflects the structure or feature of high-dimensional data was adopted to calculate the WRCC of the Dianchi Lake Basin during 2005-2015 by weighting each evaluation indicator and each subsystem of the DSPERM frame work model.The resuls show that the WRCC of the Dlanchi Lake Basin was in level II(medium carying capacity)from 2005 to 2012.Since 2013,the WRCC has been at level II(strong carying capacity),and from 2005 to 2015,it showed a gradual upward trend.The evaluation indicators of each subsystem varied greatly and exhibited different development trends.The indicators of the water resources pressure subsystem had the greatest impact on the WRCC,followed by the in-dicators of the water environmental si tuation subsystem and the water resources situation and consumption subsystem.We recommend that the DSPERM framework model and the simulated anneal ing-projection pursuit model constructed in this work can be used to analyze the dynamic changes of the WRCC over the years.They have the advantages of practicability and feasibilty,and can provide the basis for the scienti fic decision-making and comprehensive management of regional water environment planning.

Analysis of micro vortex metallization and introduction of evaluation factor in mixing process

To improve the mixing efficiency in water purification or wastewater treatment process and understand the mechanism of mass transfer,and a suitable evaluation factor is introduced to evaluate the efficiency of mixing process.The diffusion mass transfer under turbulent condition is investigated based on dynamic and mathematical analysis.The results indicate that submicroscopic diffusion is the rate-limiting step in mass transfer,and the inertia effect of micro vortex causes the phase mixing.An excellent efficiency can be obtained by controlling the scale of micro vortex within millimeter.Furthermore,a new indicator named mixing factor(IH)is proposed to evaluate the efficiency of mixing processes,which is more feasible than conventional evaluation methods,because of its connection of mixing extent with energy consumption.

An effective method for performance evaluation of ACLS based on improved grey analytic hierarchy

The performance evaluation of automatic carrier landing system(ACLS)is an important part in the field of carrier aircraft landing control.Combining grey analytic hierarchy theory and data normalization theory,an improved grey analytic hierarchy method is introduced to evaluate the performance of ACLS.A complete performance evaluation indicators system of ACLS is established,and the definition and calculation formula of each indicator are provided.The grey analytic hierarchy model is modified to improve the real-time performance of the algorithm,where traditional expert scoring sampling matrix is substituted by an indicator normalized sample matrix.Taking a certain ACLS as an example,the experimental simulation is carried out,and the simulation results verify the reliability and the accuracy of the improved grey analytic hierarchy method.

Control characteristics of D + A combined multi-pump controlled system

In order to solve the flow mismatch problem between pumping source output and workload demand,a novel configuration of D + A combined multi-pump controlled hydraulic system,similar to a pump-controlled system,is proposed for a large power hydraulic system in this study. This novel configuration consists of several parallel fixed displacement pumps of different sizes and proportional variable displacement pumps,which is controlled by digital signal( on/off) and analog signal respectively( D + A pumps). The system flow is divided into two parts,one is the total flow from fixed displacement pumps,and the other is the rest desired flow supplied by variable displacement pumps to smooth and improve the demand flow. First,basic design principles and evaluation indicators of the proposed system are introduced. Then,a flow state matrix of the binary-coding digital pumps( 1: 2: 4) is obtained to provide the control signals of pumps. Experimental results show that the system output flow tracks well with acceptable flow deviation,though a little lag behind input signal.

Evaluation on Port Ecological Culture——Take Yangshan Port of Shanghai as an Example

Combining development demand of the port and characteristics and role of the culture, and using information precipitation method and common factor extraction method of factor-analysis dimensionality reduction, three-grade indicator system of the port ecological culture is construc- ted. By using AHP and fuzzy comprehensive evaluation method, evaluation model of the port ecological culture is established. By combining the construction of ecological culture in Yangshan Port, case analysis is conducted. Result shows that ecological culture development in Yangshan Port is below moderate level, and Yangshan Port needs to strengthen ecological culture construction to improve whole average level. Finally, for ecologi- cal culture construction of the enterprise, we propose suggestions that enterprise can refer the designed indicator and weight, and clarify focus and direction of the construction.