Mitigation of polycyclic aromatic hydrocarbons(PAHs)in roasted beef patties by cold plasma treatment and products quality evaluation

The cold plasma(CP)technique was applied to alleviate the contamination of polycyclic aromatic hydrocarbon(PAH)in this investigation.Two different CP treatments methods were implemented in the production of beef patties,to investigate their inhibition and degradation capacity on PAHs.With 5 different cooking oils and fats addition,the inhibition mechanism of in-package cold plasma(ICP)pretreatment was explored from the aspect of raw patties fatty acids composition variation.The results of principal component analysis showed that the first two principal components accounted for more than 80%of the total variation in the original data,indicating that the content of saturated fatty acids was significantly positively correlated with the formation of PAHs.ICP pretreatment inhibited the formation of PAHs by changing the composition of fatty acids,which showed that the total amount of polyunsaturated fatty acids decreased and the total amount of monounsaturated fatty acids increased.Sensory discrimination tests demonstrated there were discernable differences between 2 CP treated samples and the controls,utilization of the ICP pretreatment in meat products processing was expected to achieve satisfying eating quality.In conclusion,CP treatment degraded PAHs through stepwise ring-opening oxidation in 2 reported pathways,the toxicity of PAHs contaminated products was alleviated after CP treatment.

Based on non-targeted metabolomics for differential components screening of Rosae Chinensis Flos and Rosae Rugosae Flos and their quality evaluation

Background:Rosa chinensis Jacq.and Rosa rugosa Thunb.are not only of ornamental value,but also edible flowers and the flower buds have been listed in the Chinese Pharmacopoeia as traditional medicines.The two plants have some differences in efficacy,but the flower buds are easily confused for similar traits.In addition,large-scale cultivation of ornamental rose flowers may lead to a decrease in the effective components of medicinal roses.Therefore,it is necessary to study the chemical composition and make quality evaluation of Rosae Chinensis Flos(Yueji)and Rosae Rugosae Flos(Meigui).Methods:In this study,40 batches of samples including Meigui and Yueji from different regions in China were collected to establish high-performance liquid chromatography fingerprints.Then,the fingerprints data was analyzed using principal component analysis,hierarchical cluster analysis,and partial least squares discriminant analysis analysis chemometrics to obtain information on intergroup differences,and non-targeted metabolomic techniques were applied to identify and compare chemical compositions of samples which were chosen from groups with large differences.Differential compounds were screened by orthogonal partial least-squares discriminant analysis and S-plot,and finally multi-component quantification was performed to comprehensively evaluate the quality of Yueji and Meigui.Results:The similarity between the fingerprints of 40 batches roses and the reference print R was 0.73 to 0.93,indicating that there were similarities and differences between the samples.Through principal component analysis and hierarchical cluster analysis of fingerprints data,the samples from different origins and varieties were intuitively divided into four groups.Partial least-squares discriminant analysis analysis showed that Meigui and Yueji cluster into two categories and the model was reliable.A total of 89 compounds were identified by high resolution mass spectrometry,mainly were flavonoids and flavonoid glycosides,as well as phenolic acids.Eight differential components were screened out by orthogonal partial least-squares discriminant analysis and S-plot analysis.Quantitative analyses of the eight compounds,including gallic acid,ellagic acid,hyperoside,isoquercitrin,etc.,showed that Yueji was generally richer in phenolic acids and flavonoids than Meigui,and the quality of Yueji from Shandong and Hebei was better.It is worth noting that Xinjiang rose is rich in various components,which is worth focusing on more in-depth research.Conclusion:In this study,the fingerprints of Meigui and Yueji were established.The chemical components information of roses was further improved based on non-targeted metabolomics and mass spectrometry technology.At the same time,eight differential components of Meigui and Yueji were screened out and quantitatively analyzed.The research results provided a scientific basis for the quality control and rational development and utilization of Rosae Chinensis Flos and Rosae Rugosae Flos,and also laid a foundation for the study of their pharmacodynamic material basis.

Research on the prognostic value of adjusting intraperitoneal threedimensional quality evaluation mode in laparoscopic cholecystectomy patients

BACKGROUND Benign gallbladder diseases have become a high-prevalence condition not only in China but also worldwide.The main types of benign gallbladder diseases include gallbladder polyps,acute and chronic cholecystitis,and gallstones,with gallstones being the most common,accounting for over 70%of cases.Although the mortality rate of benign gallbladder diseases is low,they carry obvious potential risks.Studies have shown that an increased incidence of benign gallbladder diseases can increase the risk of cardiovascular diseases and gallbladder cancer,resulting in a substantial disease burden on patients and their families.AIM To assess the medical utility of the Configuration-Procedure-Consequence(CPC)three-dimensional quality evaluation model in modulating the prognosis of laparoscopic cholecystectomy patients.METHODS A total of 98 patients who underwent laparoscopic cholecystectomy in our hospital from February 2020 to January 2022 were selected as the subjects.According to the random number table method,they were divided into a study group and a control group,with 49 patients in each group.The control group received routine perioperative care,while the study group had the addition of the CPC three-dimensional quality evaluation.The postoperative recovery-related indicators(time to first flatus,time to oral intake,time to ambulation,hospital stay),stress indicators(cortisol and adrenaline levels),distinctions in anxiety and RESULTS The time to first flatus,time to oral intake,time to ambulation,and hospital stay of the study group patients were obviously lower than those of the control group patients,with statistical significance(P<0.05).On the 1st day after admission,there were no obvious distinctions in cortisol and adrenaline levels in blood samples,as well as in the Self-Rating Anxiety Scale(SAS)and Self-Rating Depression Scale(SDS)scores between the study group and the control group(P>0.05).However,on the 3rd day after surgery,the cortisol and adrenaline levels,as well as SAS and SDS scores of the study group patients,were obviously lower than those of the control group patients(P<0.05).The study group had 2 cases of incisional infection and 1 case of pulmonary infection,with a total incidence of complications of 6.12%(3/49),which was obviously lower than the 20.41%(10/49)in the control group(P<0.05).CONCLUSION Implementing the CPC three-dimensional quality evaluation model for patients undergoing laparoscopic cholecystectomy can help accelerate their perioperative recovery process,alleviate perioperative stress symptoms,mitigate anxiety,depression,and other adverse emotions,and to some extent,reduce the incidence of perioperative complications.

A Quality Evaluation System for Dissertation Based on Fuzzy Analytic Hierarchy Process

A dissertation is a research report or scientific paper written by an author to obtain a certain degree. It reflects postgraduates’ research achievements and the educational quality of an institute, even a country. To construct an optimized quality evaluation system for postgraduate dissertation (QESPD), we summarized the influencing factors and invited 10 experienced specialists to rate and prioritize them based on fuzzy analytic hierarchy process. Four primary indicators (innovation, integrity, scientificity and normativity) and 16 sub-indicators were selected to form the evaluation system. The order of primary indicators by weight, was innovation (0.4269), scientificity (0.2807), integrity (0.1728) and normativity (0.1196). The top five sub-dimensions were theoretical originality, scientific value, data reliability, design rationality and evidence credibility. To demonstrate the effectiveness of the proposed system, a case study was performed. In the case study, it was demonstrated that the established two-index-hierarchy QESPD in this study was a more scientific and reasonable evaluation system worthy of promotion and application.

Current Status of the Application of Surgical Specialty Nursing Quality Evaluation Indicators

This paper reviews the current status of the application of surgical specialty nursing quality evaluation indicators both domestically and internationally.It covers the related concepts,theoretical foundations,construction methods,construction fields,application research,and existing shortcomings of these indicators.It suggests that scholars and researchers in the nursing field in China should base their work on mature theories,use scientific research methods,and construct a quality indicator system that aligns with China’s surgical development,is practical,unified,suitable for the local context,and beneficial for the development of the surgical nursing discipline.

Evaluation and Driving Force Analysis of Cultivated Land Quality in Black Soil Region of Northeast China

Cultivated land is an important natural resource to ensure food,ecological and economic security.The cultivated land quality evaluation(CQE)is greatly significant for protecting and managing cultivated land.In this study,320 counties in the black soil region of Northeast China(BSRNC)represent the research units used to construct the CQE system measuring the soil properties(SP),cultivated land productivity(CLP),ecological environment(EE)and social economy(SE).The total of 19 factors were selected to calculate the integrated fertility index(IFI)and divided into grades.Simultaneously,we used the coupling coordination degree model to comprehensively analyze the spatial pattern of the cultivated land quality(CLQ)in the BSRNC,and use the structural equation model(SEM)to analyze the driving mechanism.The results show the following:1)The CLQ of 262 counties in the BSRNC is in a state of coupling and coordination,and the coupling and coordination degree presents a spatial distribution pattern of‘high in the southwest and northeast,low in the northwest and southeast’.The coordinated development degree of 271 counties is between 0.4 and 0.6,which is in a transitional state between coordination and disorder.2)The CLQ in the BSRNC is generally good,with an average grade of 3.High-quality cultivated land accounts for 58.45%of all counties,middle-and upper-quality cultivated land accounts for 27.05%,and poor-quality cultivated land accounts for 14.49%.3)The SEM analysis shows that the SP,CLP,EE,and SE all influence the CLQ.Among them,the SP has the largest driving force on the CLQ,while the SE has the smallest driving force on it.The results confirm that the main factors affecting the evaluation results are crop productivity level,normalized difference vegetation index,ratio vegetation index,difference vegetation index,and organic carbon content.When implementing protection measures in counties with a low CLQ,considering a balanced coordination of multiple systems and reasonably controlling the quality degradation are important.This study provides the current situation and driving factors of the CLQ in the BSRNC and will play an important role in black soil governance and utilization.

Multidimensional Quality Evaluation of Graduate Thesis:Based on the Probabilistic Linguistic MABAC Method

Graduate education is the main way to train high-level innovative talents,the basic layout to cope with the global talent competition,and the important cornerstone for implementing the innovation-driven development strategy and building an innovation-driven country.Therefore,graduate education is of great remarkably to the development of national education.As an important manifestation of graduate education,the quality of a graduate thesis should receive more attention.It is conducive to promoting the quality of graduates by supervising and examining the quality of the graduate thesis.For this purpose,this work is based on textmining,expert interviews,and questionnaire surveys to obtain the factors influencing the quality of a graduate thesis first.Then,through three rounds of expert consultation,a multidimensional evaluation indicator system for the graduate thesis quality is built.Furthermore,probabilistic linguistic termsets(PLTSs)are utilized to obtain the initial evaluation information and apply the stepwise weight assessment ratio analysis method to determine the weights of attributes.In the ensuing step,the novel multi-attribute border approximation area comparison based on the PLTS method is established.Finally,the proposed method is employed in a case study concerning the quality evaluation of a graduate thesis and the effectiveness of this approach is further illustrated.

Eco-environmental Quality Evaluation of Manasi River Basin in Recent 30 Years

Taking the Technical Specifications of Eco-environmental Quality Assessment enacted by the State Environmental Protection Administration in 2006 as the conceptual framework model and improving some indices and weights in the regulation,the eco-environmental assessment index system for Manas River Basin was established,and the eco-environmental quality index (EQI) of this basin from 1976 to 2005 was assessed based on the related data.The results indicated that the ecological quality index increased to 48.26 from 34.44 during 1976-2005.The biologic abundance index,vegetation coverage index and land deterioration index decreased,while there was an increase in water reticulation density index,environmental quality index and pollution load index,so the improvement and deterioration of the ecological environment coexisted in the basin.On the whole,the poor state of the basin ecological environment had turned into a general state,and the eco-environmental quality was developed towards favorable circle.The results also showed that the improved calculating method of EQI accorded with the actual situation of the research area.

Soil Environmental Quality Evaluation for Wasteland of Coalmine Tailing Polluted by Heavy Metals in Mingshan of Guangdong

ln order to appraise scientifical y the heavy metal contamination in waste-land of coalmine tailing in Mingshan of Guangdong, the 5 soil samples in wasteland of coalmine tailing were col ected in November 2010 to March 2011. The 7 heavy metals content in the contaminated soil was measured by atomic absorption spec-trophotometry. The results showed the pH of the wasteland soil ranged from 2.87 to 6.16, and the soil was relatively infertile. The soil was mainly pol uted by Cd and Mn. The Cd content in wasteland soil ranged from 0.759 mg/kg to 3.109 mg/kg with an average content of 2.052 mg/kg, which was much higher than the standard content. The Mn content ranged from 387.057 to 488.660 mg/kg with an average content of 421.215 mg/kg, which was much higher than the standard content. The Nemerow integrated pol ution indexes showed the sample 1, sample 4 and sample 5 were of heavy pol ution, and sample 2 and sample 3 were of moderate pol ution.

Development of Bean Dreg Bread and Quality Evaluation

The research compared differences between bean dreg breads and common breads from perspectives of sensory quality, texture and taste.

Entropy method for determination of weight of evaluating indicators in fuzzy synthetic evaluation for water quality assessment

Considering the difficulty of fuzzy synthetic evaluation method in calculation of the multiple factors and ignorance of the relationship among evaluating objects, a new weight evaluation process using entropy method was introduced. This improved method for determination of weight of the evaluating indicators was applied in water quality assessment of the Three Gorges reservoir area. The results showed that this method was favorable for fuzzy synthetic evaluation when there were more than one evaluating objects. One calculation was enough for calculating every monitoring point. Compared with the original evaluation method, the method predigested the fuzzy synthetic evaluation process greatly and the evaluation results are more reasonable.

Comprehensive Evaluation on the Irrigation Water Quality in Turpan City Based on Matter Element Analysis Method

Matter-element analysis method was used to construct the comprehensive matter-element model for the evaluation of the quality of various kinds of irrigation water in Turpan City to evaluate the quality of irrigation water（such as river water,spring water, Karez well water, pumped well water） in Turpan City, Xinjiang. The results showed that the quality of the irrigation water was the best in October,which was in Grade I or Grade 2; in May, the quality of some of the irrigation water became poorer to Grade II, which was easy to soil salinization; in March, the detected qualities of the water samples water from the Meiyaogou basin were all in Grade IV, which was not suitable for farmland irrigation. The comparison on the evaluation results of matter-element analysis and fuzzy evaluation method showed that the results of the 2 methods were almost consistent with each other, and showed good uniformity.

FANN-Based Surface Water Quality Evaluation Model and Its Application in the Shaoguan Area

A fuzzy neural network model is proposed to evaluate water quality. The model contains two parts： first, fuzzy mathematics theory is used to standardize the samples; second, the RBF neural network and the BP neural network are used to train the standardized samples. The proposed model was applied to assess the water quality of 16 sections in 9 rivers in the Shaoguan area in 2005. The evaluation result was compared with that of the RBF neural network method and the reported results in the Shaoguan area in 2005. It indicated that the performance of the proposed fuzzy neural network model is practically feasible in the application of water quality assessment and its operation is simple.

Quality evaluation of layerlike backfilling and flow pattern of backfill slurry in stope

Stability condition and quality evaluation formula of layerlike backfilling roof,Q≥C,where Q denotes is quality index depending on allowable compressive or tensile strength and integrity of backfilling,and C is the technical index depending on mining method and backfilling technology,were inferred according to simply supported beam theorem.Technical treatment measures for instable backfilling roof,including optimum of appropriate filling materials and dosage for excellent flow property and reduction of backfill cost.It is proved that slope equation of backfill slurry in a stope to be filled is y=hexp[x2/(2σ)2)],where h is height of cone and σ2 is mean square,and that optimum drainage point of backfill slurry can be determined by the equation and sizes of stope.Case study indicates that the results can give a theoretical support for quality evaluation and control of layerlike backfilling.

Water Quality Evaluation in Tidal River Reaches of Liaohe River Estuary, China Using a Revised QUAL2K Model

Rivers in the Liaohe River Estuary area have been seriously polluted by discharges of wastewater containing petroleum pol- lutants and nutrients. In this paper, The Enhanced Stream Water Quality Model （QUAL2K） and its revised model as well as One-dimensional Tide Mean Model （1D model） were applied to predict and assess the water quality of the tidal fiver reach of the Liaohe River Estuary. Dissolved oxygen （DO）, biochemical oxygen demand （BODs）, ammonia nitrogen （NH3-N） and total phosphorus （TP） were chosen as water quality indices in the two model simulations. The modelled results show that the major reasons for degraded rivers remain petroleum and non-point source pollution. Tidal water also has a critical effect on the variation of water quality. The sensitivity analysis identifies that flow rate, point load and diffuse load are the most sensitive parameters for the four water quality indices in the revised QUAL2K simulation. Uncertainty analysis based on a Monte Carlo simulation gives the probability distribution of the four wa- ter quality indices at two locations （6.50 km and 44.84 km from the river mouth）. The statistical outcomes indicate that the observed data fall within the 90% confidence intervals at all sites measured, and show that the revised QUAL2K gives better results in simulating the water quality of a tidal fiver.

High-resolution modeling and evaluation of ozone air quality of Osaka using MM5-CMAQ system

High-resolution modeling approach is increasingly being considered as a necessary step for improving the monitoring and predictions of regional air quality. This is especially true for highly urbanized region with complex terrain and land-use. This study uses Community Multiscale Air Quality （CMAQ） model coupled with MM5 mesoscale model for a comprehensive analysis to assess the suitability of such high-resolution modeling system in predicting ozone air quality in the complex terrains of Osaka, Japan. The 1-km and 3-kin grid domains were nested inside a 9-km domain and the domain with 1-km grid covered the Osaka region. High-resolution Grid Point Value-Mesoscale Model （GPV-MSM） data were used after suitable validation. The simulated ozone concentrations were validated and evaluated using statistical metrics using performance criteria set for ozone. Daily maxima of ozone were found better simulated by the 1-krn grid domain than the coarser 9-km and 3-km domains, with the maximum improvement in the mean absolute gross error about 3 ppbv. In addition, 1-km grid results fared better than other grids at most of the observation stations that showed noticeable differences in gross error as well as correlation. These results amply justify the use of the integrated high-resolution MM5-CMAQ modeling system in the highly urbanized region, such as the Osaka region, which has complex terrain and land-use.

Chromatographic fingerprinting and quantitative analysis for the quality evaluation of Xinkeshu tablet

A simple, sensitive and accurate method based on high performance liquid chromato- graphy （HPLC） with diode array detector （DAD） was developed and validated for systematic quality evaluation of one type of traditional Chinese medicine preparations named Xinkeshu （XKS） tablet. In this study, the chromatographic fingerprints of XKS tablet were developed first, 23 peaks were selected as the common peaks to evaluate the similarities among different batches of XKS samples, which were manufactured in a long time span of three years. Additionally, simultaneous quantification of six markers in XKS tablet, including Danshensu, Protocatechuic aldehyde, Puerarin, Daidzin, Salvianolic acid B and Daidzein, was performed. The validation results showed that the developed method was specific, accurate, precise and robust. The preliminary explanation on why a close similarity between fingerprints did not exactly mean similar contents of chemical components in samples was given. The contribution of each chromatographic peak to similarity was also evaluated. The developed method offers an efficient, reliable and practical approach for systematic quality evaluation of XKS tablet.

Objective Evaluation Method of Steering Comfort Based on Movement Quality Evaluation of Driver Steering Maneuver

The existing research of steering comfort mainly focuses on the subjective evaluation,aiming at designing and optimizing the steering system.In the development of steering system,especially the evaluation of steering comfort,the objective evaluation methods considered the kinematic characteristics of driver steering maneuver are not proposed,which means that the objective evaluation of steering cannot be conducted with the evaluation of kinematic characteristics of driver in steering maneuver.In order to propose the objective evaluation methods of steering comfort,the evaluation of steering movement quality of driver is developed on the basis of the study of the kinematic characteristics of steering maneuver.First,the steering motion trajectories of the driver in both comfortable and certain extreme uncomfortable operation conditions are detected using the Vicon motion capture system.The operation conditions are under the restrictions of the vertical height and horizontal distance between steering wheel center and the H-point of driver,and the steering resisting torque else.Next,the movement quality evaluation of driver steering maneuver is assessed using twelve kinds of evaluation indices based on the kinematic analyses of the steering motion trajectories to propose an objective evaluation method.Finally,an integrated discomfort index of steering maneuver is proposed on the basis of the regression analysis of subjective evaluation rating and the movement quality evaluation indices,including the Jerk,Discomfort and Joint Torque indices.The test results show that the proposed integrated discomfort index gives a good fitting with the subjective evaluation of discomfort,which means it can be used to evaluate or predict the discomfort level of steering maneuver.This paper proposes an objective evaluation method of steering comfort based on the movement quality evaluation of driver steering maneuver.

An Evaluation Scale of Medical Services Quality Based on “Patients' Experience”

An evaluation scale of medical services quality was developed on the basis of ＂patients＇ experience＂. The questionnaires were developed by, among others, searching relevant literature, col- lecting well-established assessment scales, measuring patients＇ experience and satisfaction, brain-storming, literature analysis. Delphi method was adopted for expert consultation. Scale items were screened and revised. The key indexes were converted. Field surveys were conducted for testing the reliability and validity of the scale. Our modified evaluation scale for measuring medical services quality based on ＂patients＇ experience＂ included 6 dimensions （tangibility, reliability, responsiveness, assurance, empathy and continuity）, and 50 items. The novel scale based on ＂patients＇ experience＂ may better serve the purpose of assessin~ medical services quality.

Improved AHP method and its application in lake environmental comprehensive quality evaluation—a case study of Xuanwu Lake, Nanjing, China

The relative importance of each pollution factor in analytical hierarchy process (AHP) method comes from pooling expert opinions in general. Because expert opinions are based on information and judgment criteria, determining their weight may lead to uncertainty.. Therefore, an improved AHP method had been developed. The process of the improved AHP method involved four key procedures. The weights of pollution factors were completely related to the objective monitoring data through the standardization of these procedures. The environmental comprehensive quality of water and sediment of Xuanwu Lake, Nanjing, China had been evaluated. The environmental quality comprehensive indices (EQCI) of the water in 1991-1995 and 1996-2000 were 3.32 and 1.85, respectively, indicating that the water quality improved. The EQCI of the sediment in 1995 and 2000 indicates that the sediment contamination decreased from 1995 to 2000. Such results agreed with the fact that the lake had been under comprehensive control. However, with the classical AHP method, the EQCI of the sediment in the northwestern part of the lake may have indicated that sediment contamination increased from 1995 to 2000. The discrepancy may have resulted from the judgment difference of the experts. The improved AHP method can avoid arbitrariness of subjective judgment and can reflect the real influential factors of environment pollution in different periods or regions.