Effect of power supply parameters on discharge characteristics and sterilization efficiency of magnetically driven rotating gliding arc

Plasma sterilization is a new generation of high-tech sterilization method that is fast,safe,and pollution free.It is widely used in medical,food,and environmental protection fields.Home air sterilization is an emerging field of plasma application,which puts higher requirements on the miniaturization,operational stability,and operating cost of plasma device.In this study,a novel magnetically driven rotating gliding arc(MDRGA)discharge device was used to sterilize Lactobacillus fermentation.Compared with the traditional gas-driven gliding arc,this device has a simple structure and a more stable gliding arc.Simulation using COMSOL Multiphysics showed that adding permanent magnets can form a stable magnetic field,which is conducive to the formation of gliding arcs.Experiments on the discharge performance,ozone concentration,and sterilization effect were conducted using different power supply parameters.The results revealed that the MDRGA process can be divided into three stages:starting,gliding,and extinguishing.Appropriate voltage was the key factor for stable arc gliding,and both high and low voltages were not conducive to stable arc gliding and ozone production.In this experimental setup,the sterilization effect was the best at 6.6 kV.A high modulation duty ratio was beneficial for achieving stable arc gliding.However,when the duty ratio exceeded a certain value,the improvement in the sterilization effect was slow.Therefore,considering the sterilization effect and energy factors comprehensively,we chose 80%as the optimal modulation duty ratio for this experimental device.

Data-driven modeling on anisotropic mechanical behavior of brain tissue with internal pressure

Brain tissue is one of the softest parts of the human body,composed of white matter and grey matter.The mechanical behavior of the brain tissue plays an essential role in regulating brain morphology and brain function.Besides,traumatic brain injury(TBI)and various brain diseases are also greatly influenced by the brain's mechanical properties.Whether white matter or grey matter,brain tissue contains multiscale structures composed of neurons,glial cells,fibers,blood vessels,etc.,each with different mechanical properties.As such,brain tissue exhibits complex mechanical behavior,usually with strong nonlinearity,heterogeneity,and directional dependence.Building a constitutive law for multiscale brain tissue using traditional function-based approaches can be very challenging.Instead,this paper proposes a data-driven approach to establish the desired mechanical model of brain tissue.We focus on blood vessels with internal pressure embedded in a white or grey matter matrix material to demonstrate our approach.The matrix is described by an isotropic or anisotropic nonlinear elastic model.A representative unit cell(RUC)with blood vessels is built,which is used to generate the stress-strain data under different internal blood pressure and various proportional displacement loading paths.The generated stress-strain data is then used to train a mechanical law using artificial neural networks to predict the macroscopic mechanical response of brain tissue under different internal pressures.Finally,the trained material model is implemented into finite element software to predict the mechanical behavior of a whole brain under intracranial pressure and distributed body forces.Compared with a direct numerical simulation that employs a reference material model,our proposed approach greatly reduces the computational cost and improves modeling efficiency.The predictions made by our trained model demonstrate sufficient accuracy.Specifically,we find that the level of internal blood pressure can greatly influence stress distribution and determine the possible related damage behaviors.

Effects of counter-current driven by electron cyclotron waves on neoclassical tearing mode suppression

Through theoretical analysis,we construct a physical model that includes the influence of counter-external driven current opposite to the plasma current direction in the neoclassical tearing mode(NTM).The equation is used with this model to obtain the modified Rutherford equation with co-current and counter-current contributions.Consistent with the reported experimental results,numerical simulations have shown that the localized counter external current can only partially suppress NTM when it is far from the resonant magnetic surface.Under some circumstances,the Ohkawa mechanism dominated current drive(OKCD)by electron cyclotron waves can concurrently create both co-current and counter-current.In this instance,the minimal electron cyclotron wave power that suppresses a particular NTM was calculated by the Rutherford equation.The result is marginally less than when taking co-current alone into consideration.As a result,to suppress NTM using OKCD,one only needs to align the co-current with a greater OKCD peak well with the resonant magnetic surface.The effect of its lower counter-current does not need to be considered because the location of the counter-current deviates greatly from the resonant magnetic surface.

Research on the Microstructure Construction Technology of Fully Degraded Polymer Vascular Stent Based on Electric Field Driven 3D Printing

The so-called fourth-generation biodegradable vascular stent has become a research hotspot in thefield of bioengineering because of its good degradation ability and drug-loading characteristics.However,the preparationof polymer-degraded vascular stents is affected by known problem such as poor processflexibility,low formingaccuracy,large diameter wall thickness,limited complex pore structure,weak mechanical properties of radial support and high process cost.In this study,a deposition technique based on a high-voltage electric-field-driven continuous rotating jet is proposed to fabricate fully degraded polymer vascular stents.The experimental results showthat,due to the rotation of the deposition axis,the deposition direction of PCL(polycaprolactone)micro-jet isalways tangent to the surface of the deposition axis.The direction of the viscous drag force is also consistent withthe deposition direction of the jet.It is shown that by setting different rotation speeds of deposition axisωandlinear motion speeds of the nozzle V,the direction of rotation,pitch and angle of the individual printed spiralcurve can be precisely tuned.In the process of multiple spiral curves matching the deposition forming thin walltube mesh,the mesh shape and size of the thin wall tube can be accurately controlled by changing the number ofmatching spiral curves and the size of the matching position bias distance.Finally,the characteristics of a PCLtubular stent sample(with uniform-size microfibers and mesh shape),fabricated under the appropriate processparameters are described in detail.

Investigation of system parameters towards safer impact based shock-to-detonation transition in a novel laser driven flyer plate prototype

Laser driven flyer plate technology offers improved safety and reliability for detonation of explosives in industrial applications ranging from mining and stone quarrying to the aerospace and defense industries.This study is based on developing a safer laser driven flyer plate prototype comprised of a laser initiator and a flyer plate subsystem that can be used with secondary explosives.System parameters were optimized to initiate the shock-to-detonation transition(SDT)of a secondary explosive based on the impact created by the flyer plate on the explosive surface.Rupture of the flyer was investigated at the mechanically weakened region located on the interface of these subsystems,where the product gases from the deflagration of the explosive provide the required energy.A bilayer energetic material was used,where the first layer consisted of a pyrotechnic component,zirconium potassium perchlorate(ZPP),for sustaining the ignition by the laser beam and the second layer consisted of an insensitive explosive,cyclotetramethylene-tetranitramine(HMX),for deflagration.A plexiglass interface was used to enfold the energetic material.The focal length of the laser beam from the diode was optimized to provide a homogeneous beam profile with maximum power at the surface of the ZPP.Closed bomb experiments were conducted in an internal volume of 10 cm^(3) for evaluation of performance.Dependency of the laser driven flyer plate system output on confinement,explosive density,and laser beam power were analyzed.Measurements using a high-speed camera resulted in a flyer velocity of 670±20 m/s that renders the prototype suitable as a laser detonator in applications,where controlled employment of explosives is critical.

Data Driven Vibration Control:A Review

With the ongoing advancements in sensor networks and data acquisition technologies across various systems like manufacturing,aviation,and healthcare,the data driven vibration control(DDVC)has attracted broad interests from both the industrial and academic communities.Input shaping(IS),as a simple and effective feedforward method,is greatly demanded in DDVC methods.It convolves the desired input command with impulse sequence without requiring parametric dynamics and the closed-loop system structure,thereby suppressing the residual vibration separately.Based on a thorough investigation into the state-of-the-art DDVC methods,this survey has made the following efforts:1)Introducing the IS theory and typical input shapers;2)Categorizing recent progress of DDVC methods;3)Summarizing commonly adopted metrics for DDVC;and 4)Discussing the engineering applications and future trends of DDVC.By doing so,this study provides a systematic and comprehensive overview of existing DDVC methods from designing to optimizing perspectives,aiming at promoting future research regarding this emerging and vital issue.

MPC-based Torque Distribution for Planar Motion of Four-wheel Independently Driven Electric Vehicles:Considering Motor Models and Iron Losses

The most critical obstacle for four-wheel independently driven electric vehicles(4WID-EVs)is the driving range.Being the actuators of 4WID-EVs,motors account for its major power consumption.In this sense,by properly distributing torques to minimize the power consumption,the driving range of 4WID-EV can be effectively improved.This paper proposes a model predictive control(MPC)-based torque distribution scheme,which minimizes the power consumption of 4WID-EVs while guaranteeing its tracking performance of planar motions.By incorporating the motor model considering iron losses,the optimal torque distribution can be achieved without an additional torque controller.Also,for this reason,the proposed control scheme is computationally efficient,since the power consumption term to be optimized,which is expressed as the product of the motor voltages and currents,is much simpler than that derived from the efficiency map.With reasonable simplification and linearization,the MPC problem is converted to a quadratic programming problem,which can be solved efficiently.The simulation results in MATLAB and CarSim co-simulation environments demonstrate that the proposed scheme effectively reduces power consumption with guaranteed tracking performance.

Power Consumption Characteristics Research on Mobile System of Electrically Driven Large-Load-Ratio Six-Legged Robot

The electrically driven large-load-ratio six-legged robot with engineering capability can be widely used in outdoor and planetary exploration.However,due to the particularity of its parallel structure,the effective utilization rate of energy is not high,which has become an important obstacle to its practical application.To research the power consumption characteristics of robot mobile system is beneficial to speed up it toward practicability.Based on the configuration and walking modes of robot,the mathematical model of the power consumption of mobile system is set up.In view of the tripod gait is often selected for the six-legged robots,the simplified power consumption model of mobile system under the tripod gait is established by means of reducing the dimension of the robot’s statically indeterminate problem and constructing the equal force distribution.Then,the power consumption of robot mobile system is solved under different working conditions.The variable tendencies of the power consumption of robot mobile system are respectively obtained with changes in the rotational angles of hip joint and knee joint,body height,and span.The articulated rotational zones and the ranges of body height and span are determined under the lowest power consumption.According to the walking experiments of prototype,the variable tendencies of the average power consumption of robot mobile system are respectively acquired with changes in duty ratio,body height,and span.Then,the feasibility and correctness of theory analysis are verified in the power consumption of robot mobile system.The proposed analysis method in this paper can provide a reference on the lower power research of the large-load-ratio multi-legged robots.

A deep learning driven hybrid beamforming method for millimeter wave MIMO system

The hybrid beamforming is a promising technology for the millimeter wave MIMO system,which provides high spectrum efficiency,high data rate transmission,and a good balance between transmission performance and hardware complexity.The most existing beamforming systems transmit multiple streams by formulating multiple orthogonal beams.However,the Neural network Hybrid Beamforming(NHB)adopts a totally different strategy,which combines multiple streams into one and transmits by employing a high-order non-orthogonal modulation strategy.Driven by the Deep Learning(DL)hybrid beamforming,in this work,we propose a DL-driven nonorthogonal hybrid beamforming for the single-user multiple streams scenario.We first analyze the beamforming strategy of NHB and prove it with better Bit Error Rate(BER)performance than the orthogonal hybrid beamforming even with the optimal power allocation.Inspired by the NHB,we propose a new DL-driven beamforming scheme to simulate the NHB behavior,which avoids time-consuming neural network training and achieves better BERs than traditional hybrid beamforming.Moreover,our simulation results demonstrate that the DL-driven nonorthogonal beamforming outperforms its traditional orthogonal beamforming counterpart in the presence of subconnected schemes and imperfect Channel State Information(CSI).

数智时代的信息分析方法:数据驱动、知识驱动及融合驱动

数智时代,面对大数据、大知识所带来的挑战,如何创新发展信息分析方法,关乎新时代信息分析工作的开展,关乎数据资源的开发利用。本文在梳理现有信息分析方法的基础上,提出数据驱动、知识驱动,以及数据与知识融合驱动的三种数智型方法思路。首先,提出基于文本、网络、音频、图像等的数据驱动以及与之相应的文本挖掘、图挖掘、音频挖掘、图像挖掘等信息分析模式;其次,提出基于专家知识库、通用知识库、领域知识图谱、通用知识图谱等的知识驱动信息分析模式;最后,提出基于特征、模型、决策三种层面的数据与知识融合驱动的信息分析模式。通过以上三种方法,构建能够系统融合大数据、大知识的信息分析方法,实现数智融合型信息分析,促进图书情报学科方法论发展,赋能国家决策和社会治理。图3。表1。参考文献59。

Deoxyribonucleic acid methylation driven aberrations in pancreatic cancer-related pathways

Pancreatic cancer(PanCa)presents a catastrophic disease with poor overall survival at advanced stages,with immediate requirement of new and effective treatment options.Besides genetic mutations,epigenetic dysregulation of signaling pathway-associated enriched genes are considered as novel therapeutic target.Mechanisms beneath the deoxyribonucleic acid methylation and its utility in developing of epi-drugs in PanCa are under trails.Combinations of epigenetic medicines with conventional cytotoxic treatments or targeted therapy are promising options to improving the dismal response and survival rate of PanCa patients.Recent studies have identified potentially valid pathways that support the prediction that future PanCa clinical trials will include vigorous testing of epigenomic therapies.Epigenetics thus promises to generate a significant amount of new knowledge of biological and medical importance.Our review could identify various components of epigenetic mechanisms known to be involved in the initiation and development of pancreatic ductal adenocarcinoma and related precancerous lesions,and novel pharmacological strategies that target these components could potentially lead to breakthroughs.We aim to highlight the possibilities that exist and the potential therapeutic interventions.

On the Effects of Driven Element L/D Ratio and Length in VHF-SHF Yagi-Uda Arrays

While the Yagi-Uda array has been studied for decades, one issue appears to have received less attention than perhaps it should, namely, the effects on performance of the array’s driven element length and its length-to-diameter ratio. This paper looks at that question. It shows that decreasing the L/D ratio increases impedance bandwidth, but it may shift the IBW band sufficiently far from the design frequency that other parameters such as gain and front-to-back ratio probably are adversely affected. It also shows that array performance is not relatively independent of element diameters. This paper also investigates the effect of lengthening the driven element, which can substantially improve IBW. Several iterations of a 3-element prototype and improved arrays are modeled with the Method of Moments and discussed in detail. A five step design procedure is recommended and applied to a Genetic Algorithm-optimized 3-element Yagi at 146 MHz. This array exhibits excellent performance in terms of gain, front-to-back ratio, and especially impedance bandwidth (nearly 14% for voltage standing wave ratio ≤ 2:1 with two frequencies at which 50 ? is almost perfectly matched). While the analysis and recommended design steps are applied to cylindrical array elements, which commonly are aluminum tubing for stand-alone VHF-SHF Yagis, they can be applied to other element geometries as well using equivalent cylindrical radii, for example, Printed Circuit Board traces for planar arrays. One consequence of lengthening the driven element while reducing its L/D ratio is that some reactance is introduced at the array feedpoint which must be tuned out, and two approaches for doing so are suggested.

Implosion Plasma Driven Fusion Pellet of Inertial Confinement(A Short Memorandum)

The implosion plasma drive fusion pellet of inertial confinement is a concept related to nuclear fusion,a process in which atomic nuclei combine to form heavier nuclei,releasing a large amount of energy in the process.The implosion plasma drive fusion pellet is a potential fuel source for achieving controlled nuclear fusion.ICF(inertial confinement fusion)is a technique used to achieve fusion by compressing a small target containing fusion fuel to extremely high densities and temperatures using lasers or other methods.The implosion plasma drive fusion pellet concept involves using a small pellet of deuterium and tritium(two isotopes of hydrogen)as fusion fuel,and then rapidly heating and compressing it using a pulsed power system.The implosion process creates a high-pressure plasma that ignites the fusion reactions,releasing energy in the form of neutrons and charged particles.The resulting energy can be captured and used for power generation.This technology is still in the experimental stage,and significant research and development is required to make it commercially viable.However,it has the potential to provide a virtually limitless source of clean energy with no greenhouse gas emissions or long-term radioactive waste.Be that as it may,ICF has to get exact control of the implosion process,mitigate insecurities,and create modern materials and advances to resist the extraordinary conditions of the combined response.

新质生产力:中国式现代化的新动能与新路径

纵观西方现代化和中国式现代化的历史进程,生产力的持续发展是现代化的共同特征。人类历史上每一次生产力的重大跃升都以一系列开创性的科学发现和技术突破为先导,因而科技创新是社会生产力发展的关键因素。随着新一轮科技革命和产业变革的孕育兴起,新质生产力将取代传统生产力,成为推动中国式现代化的重要力量。新质生产力是以科技创新为主导,实现关键性、颠覆性技术突破的生产力,本质上是社会生产力的一次重大跃升。发展新质生产力是推动高质量发展的内在要求和重要着力点,亦是中国式现代化的必然选择。加快形成新质生产力以推进中国式现代化,应在宏观层面坚持市场与政府有机结合,使二者协力推动科技创新;应在中观层面培育战略性新兴产业和未来产业,增强发展新动能;应在微观层面坚持“两个毫不动摇”,激发各类创新主体活力。

考虑灵活资源及模数驱动方法的电力系统调度方法综述

可再生能源及负荷种类的增多给电力系统运行带来更大不确定性,也给电力系统经济调度带来挑战。深入分析总结灵活资源特性并对不确定性的准确建模是评估电力系统灵活性和实现经济调度的基础。基于模型或数据驱动的调度建模方法面临诸多挑战,将模型与数据驱动方式相结合,并充分发挥二者优势是电力系统优化调度的发展方向。该文从灵活资源分类及特性、系统灵活性评估方法及优化调度的模型与数据驱动建模3个方面进行了归纳整理。首先,从电网侧、供应侧及需求侧3个方面介绍了系统中的灵活资源,并总结了其调节特性。其次,介绍了权重分配、数理统计及包络区间3种常用电力系统灵活性评价指标,并总结了不同方法的适用性。然后,总结了模型驱动或数据驱动的应用现状及其各自优缺点,并对模型数据交互驱动的研究现状进行了概述。最后,对考虑灵活资源的电力系统调度方案研究进行了展望。

锂离子电池健康状态估计及寿命预测研究进展综述

随着锂离子电池的应用越来越广泛,锂电池健康状态的精确估计和剩余寿命的实时预测对于锂电池系统的安全运行和降低运维成本具有重要意义。锂电池内部复杂的物理化学反应和外部复杂工作条件,使得实现精准的健康状态估计和寿命预测具有挑战性。该文综述近年来锂电池健康状态估计和剩余使用寿命预测方法的研究现状,分析基于物理/数学模型、数据驱动、模型法和数据驱动融合,以及多种数据驱动融合的锂电池健康状态估计方法的优缺点及适用条件,并对比分析不同数据驱动类型的锂电池寿命预测方法。指出锂电池健康状态估计及寿命预测尚存在的问题,并对未来研究方向进行展望,对完善锂电池健康状态估计和寿命预测算法理论体系、指导实际应用技术具有重要意义。

学以致用的项目驱动式教学研究——以财务管理专业Python语言程序设计课程为例

Python语言程序设计课程是高校广泛开设的公共通识课程。该文以财务管理专业学生为施教对象,分析该课程教学面临的困难,探讨项目驱动式教学方法。通过梳理教学内容和知识点,构建知识图谱,结合专业背景设计应用项目,把知识点的教学贯穿于应用项目的开发中,同步递进,把理论与实践有机融合,传授Python语言程序设计基础知识的同时,培养学生解决问题的能力,达到学以致用的目的。

新质生产力赋能国家粮食安全:理论逻辑、现实挑战与践行路径

全方位夯实粮食安全根基,需强化农业科技和装备支撑,走科技强国之路。新质生产力具备高质量、高效能与可持续等特征,具有智能管理优化、资源循环利用与生态平衡维护的潜力,可有效对接粮食安全战略需求。以新质生产力赋能粮食安全顶层设计和运行探索,实现粮食的增产增效和质量安全,是新时代推动农业现代化和粮食产业可持续发展的必然选择。新质生产力赋能粮食安全的价值逻辑主要体现在创新驱动增产、绿色转型提效和产业升级发展等方面,但当前仍面临技术集成缓慢、绿色技术成本高、政策脱节和农业人才流失等问题。对此,需融合前沿技术、推广绿色实践、强化政策支持、提升人力资本,推动农业产业结构调整,提高农业生产效率和产品质量,为解决粮食安全问题提供更为强大的支撑。

以新质生产力推动区域高质量发展

发展新质生产力是新时代新征程推动高质量发展的内在要求和重要着力点,我国区域之间异质性强,区域发展差异大,要以发展新质生产力为重大契机,深入实施区域协调发展战略、区域重大战略、主体功能区战略、新型城镇化战略,优化重大生产力布局,推动区域创新中心与区域产业体系深度融合发展,加强区域间协同融合,提高战略取向一致性,促进不同区域在发展新质生产力上形成合力,不断将我国区域空间回旋余地大的优势转化为新时代高质量发展的优势,加快形成多极点支撑、多层次联动、网络化发展的区域经济格局,提高我国经济发展韧性和高质量发展的可持续性,为中国式现代化和中华民族伟大复兴提供强有力的支撑。

人机协同的大学生个性化教育评价方法研究

大学生个性化培养是实现因材施教人才培养目标的重要内容,而个性化教育的智能化评价是衡量培养质量的有效手段,更是智能技术与教育结合的必然要求。针对传统个性化教育评价中数据采集获取难、评价过程环节多、指标数据粒度粗、实时反馈效果差,难以应对规模化、过程性、全方位、个性化发展评价难题,提出人机协同的大学生个性化教育评价方法。首先明确了人工智能技术赋能个性化教育评价的内容,然后提出了人机共建个性化教育评价指标体系与人机协同实施过程,最后展示了人机协同个性化教育评价的典型案例。人机协同的智能化评价手段,具有全天候、超时长的服务能力,可大幅提升评价的效率与质量,是新时代教育评价改革成功的重要手段,是实现教育评价现代化的有效途径。