This paper reports the application of pulse discharges along with catalysts in treat- ing the exhaust gas at higher temperatures. In the present work a plasma reactor, filled with catalysts, called as plasma catalytic...This paper reports the application of pulse discharges along with catalysts in treat- ing the exhaust gas at higher temperatures. In the present work a plasma reactor, filled with catalysts, called as plasma catalytic reactor, is studied for removal of oxides of nitrogen, total hydrocarbons and carbon monoxide. The experiments are conducted on an actual diesel engine exhaust at no-load and at different temperatures starting from room temperature to 300°C. The removal efficiencies of these pollutants are studied. The experiments are carried out with both con- ventional and non-conventional catalysts. The idea is to explore the pollutant removal efficiency characteristics by non-conventional catalysts. The efficiency results are compared with that of conventional catalysts. The experiments are carried out at a constant pulse repetition rate of 120 pps. Both pellet and honeycomb type catalysts are used in the study.展开更多
Integrated gasification fuel cells(IGFCs)integrating high-temperature solid oxide fuel cell technology with CO_(2)capture processes represents highly-efficient power systems with negligible CO_(2)emissions.Flame burni...Integrated gasification fuel cells(IGFCs)integrating high-temperature solid oxide fuel cell technology with CO_(2)capture processes represents highly-efficient power systems with negligible CO_(2)emissions.Flame burning with pure oxygen is an ideal method for fuel cell exhaust gas treatment,and this report describes experimental and numerical studies regarding an oxy-combustor for treating the exhaust gas of a 10 kW IGFC system anode.The applied simulation method was verified based on experiments,and the key performance indices of the combustor were studied under various conditions.It was determined that 315 K was the ideal condensation temperature to obtain flame stability.Under these pure oxygen flame burning conditions,CO was almost completely converted,and the dry mole fraction of CO_(2)after burning was C 0.958 when there was up to 5%excess O_(2).Overall,5%excess O_(2)was recommended to maximize CO_(2)capture and promote other environmental considerations.Additionally,the optimal tangential fuel jet angle to control the liner temperature was approximately 25°.The total fuel utilization had to be high enough to maintain the oxygen flame temperature of the anode exhaust gas below 1800 K to ensure that the system was environmentally friendly.The results presented herein have great value for designing IGFCs coupled with CO_(2)capture systems.展开更多
文摘This paper reports the application of pulse discharges along with catalysts in treat- ing the exhaust gas at higher temperatures. In the present work a plasma reactor, filled with catalysts, called as plasma catalytic reactor, is studied for removal of oxides of nitrogen, total hydrocarbons and carbon monoxide. The experiments are conducted on an actual diesel engine exhaust at no-load and at different temperatures starting from room temperature to 300°C. The removal efficiencies of these pollutants are studied. The experiments are carried out with both con- ventional and non-conventional catalysts. The idea is to explore the pollutant removal efficiency characteristics by non-conventional catalysts. The efficiency results are compared with that of conventional catalysts. The experiments are carried out at a constant pulse repetition rate of 120 pps. Both pellet and honeycomb type catalysts are used in the study.
基金This work was supported by the National Key R&D Program of China(No.2017YFB0601900).
文摘Integrated gasification fuel cells(IGFCs)integrating high-temperature solid oxide fuel cell technology with CO_(2)capture processes represents highly-efficient power systems with negligible CO_(2)emissions.Flame burning with pure oxygen is an ideal method for fuel cell exhaust gas treatment,and this report describes experimental and numerical studies regarding an oxy-combustor for treating the exhaust gas of a 10 kW IGFC system anode.The applied simulation method was verified based on experiments,and the key performance indices of the combustor were studied under various conditions.It was determined that 315 K was the ideal condensation temperature to obtain flame stability.Under these pure oxygen flame burning conditions,CO was almost completely converted,and the dry mole fraction of CO_(2)after burning was C 0.958 when there was up to 5%excess O_(2).Overall,5%excess O_(2)was recommended to maximize CO_(2)capture and promote other environmental considerations.Additionally,the optimal tangential fuel jet angle to control the liner temperature was approximately 25°.The total fuel utilization had to be high enough to maintain the oxygen flame temperature of the anode exhaust gas below 1800 K to ensure that the system was environmentally friendly.The results presented herein have great value for designing IGFCs coupled with CO_(2)capture systems.
