A new remote sensing method is described to determine the vertical distribution and total content of atmospheric ozone. The method combines surface infrared, satellite infrared and ultraviolet channels. The width of t...A new remote sensing method is described to determine the vertical distribution and total content of atmospheric ozone. The method combines surface infrared, satellite infrared and ultraviolet channels. The width of the infrared channels is 0.01 cm-1, less than Lorentz half-width at the earth's surface, rather than the present width, because these channels can obtain information about variations in the ozone profile below the profile main-peak. The numerical experiments show that the method has a satisfactory precision in determining total ozone content, just about I percent error, and vertical distribution from the earth to 65 km space. In addition, some semi-analysis functions lor calculating backscattered ultraviolet and a relaxation equation are described in this paper.展开更多
We argue that the modification proposed by Li et al. [Chin. Phys. Lett. 32 (2015)050303] to the experiment of Danan et al. [Phys. Rev. Lett. 111 (2013) 240402] does not test the past of the photon as characterized...We argue that the modification proposed by Li et al. [Chin. Phys. Lett. 32 (2015)050303] to the experiment of Danan et al. [Phys. Rev. Lett. 111 (2013) 240402] does not test the past of the photon as characterized by local weak traces. Instead of answering the questions: (i) were the photons in A? (ii) were the photons in B? and (iii) were the photons in C? the proposed experiment measures a degenerate operator answering the questions: (i) were the photons in A? and (ii) were the photons in B and C together? A negative answer to the last question does not tell us if photons were present in B or C. On the other hand, a simple variation of the proposal by Li et al. does provide conceptually better evidence for the past of the pre- and post-selected photon, but this evidence will be in agreement with the results of Danan et al.展开更多
An ideal experiment is designed to determine the past of a particle in the nested Mach-Zehnder interferometer (MZI) by using standard quantum mechanics with quantum non-demolition measurements. We find that when the...An ideal experiment is designed to determine the past of a particle in the nested Mach-Zehnder interferometer (MZI) by using standard quantum mechanics with quantum non-demolition measurements. We find that when the photon reaches the detector, it only follows one arm of the outer interferometer and leaves no trace in the inner MZI. When it goes through the inner MZI, it cannot reach the detector. Our result obtained from the standard quantum mechanics contradicts the statement based on two-state vector formulism, 'the photon did not enter the (inner) interferometer, the photon never left the interferometer, but it was there'. Therefore, the statement and also the overlapping claim are incorrect.展开更多
We provide a way to precisely control the geometry of a SiNx nanopore by adjusting the applied electric pulse. The pore is generated by applying the current pulse across a SiNx membrane, which is immersed in potassium...We provide a way to precisely control the geometry of a SiNx nanopore by adjusting the applied electric pulse. The pore is generated by applying the current pulse across a SiNx membrane, which is immersed in potassium chloride solution. We can generate single conical and cylindrical pores with different electric pulses. A theoretical model based on the Poisson and Nernst-Planck equations is employed to simulate the ion transport properties in the channel. In turn, we can analyze pore geometries by fitting the experimental current-voltage (I-V) curves. for the conical pores with a pore size of 0.5-2nm in diameter, the slope angles are around -2.5% to -10%. Moreover, the pore orifice can be enlarged slightly by additional repeating pulses. The conic pore lumen becomes close to a cylindrical channel, resulting in a symmetry I-V transport under positive and negative biases. A qualitative understanding of these effects will help us to prepare useful solid-nanopores as demanded.展开更多
The equilibrium and kinetic characteristics of the adsorption of erythromycin to Sepabeads SP825 were determined.The equilibrium data in a batch system was well described by a Langmuir isotherm.The separation performa...The equilibrium and kinetic characteristics of the adsorption of erythromycin to Sepabeads SP825 were determined.The equilibrium data in a batch system was well described by a Langmuir isotherm.The separation performance was investigated in a fixed-bed system with respect to the adsorption superficial velocity,ionic strength and pH.A mathematical model was used to simulate the mass transfer mechanism,taking film mass transfer,pore diffusion and axial dispersion into account.The model predictions were consistent with the experi-mental data and were consequently used to determine the mass transfer coefficients.展开更多
文摘A new remote sensing method is described to determine the vertical distribution and total content of atmospheric ozone. The method combines surface infrared, satellite infrared and ultraviolet channels. The width of the infrared channels is 0.01 cm-1, less than Lorentz half-width at the earth's surface, rather than the present width, because these channels can obtain information about variations in the ozone profile below the profile main-peak. The numerical experiments show that the method has a satisfactory precision in determining total ozone content, just about I percent error, and vertical distribution from the earth to 65 km space. In addition, some semi-analysis functions lor calculating backscattered ultraviolet and a relaxation equation are described in this paper.
基金Supported by the German-Israeli Foundation for Scientific Research and Development under Grant No I-1275-303.14
文摘We argue that the modification proposed by Li et al. [Chin. Phys. Lett. 32 (2015)050303] to the experiment of Danan et al. [Phys. Rev. Lett. 111 (2013) 240402] does not test the past of the photon as characterized by local weak traces. Instead of answering the questions: (i) were the photons in A? (ii) were the photons in B? and (iii) were the photons in C? the proposed experiment measures a degenerate operator answering the questions: (i) were the photons in A? and (ii) were the photons in B and C together? A negative answer to the last question does not tell us if photons were present in B or C. On the other hand, a simple variation of the proposal by Li et al. does provide conceptually better evidence for the past of the pre- and post-selected photon, but this evidence will be in agreement with the results of Danan et al.
基金Supported by the National Basic Research Program of China under Grant Nos 2011CB922203 and 2012CB921603the National Natural Science Foundation of China under Grant Nos 1174026 and U1330203
文摘An ideal experiment is designed to determine the past of a particle in the nested Mach-Zehnder interferometer (MZI) by using standard quantum mechanics with quantum non-demolition measurements. We find that when the photon reaches the detector, it only follows one arm of the outer interferometer and leaves no trace in the inner MZI. When it goes through the inner MZI, it cannot reach the detector. Our result obtained from the standard quantum mechanics contradicts the statement based on two-state vector formulism, 'the photon did not enter the (inner) interferometer, the photon never left the interferometer, but it was there'. Therefore, the statement and also the overlapping claim are incorrect.
基金Supported by the National Natural Science Foundation of China under Grant Nos 61471336,51503207 and 61504146the Joint-Scholar of West Light Foundation of Chinese Academy of Sciences
文摘We provide a way to precisely control the geometry of a SiNx nanopore by adjusting the applied electric pulse. The pore is generated by applying the current pulse across a SiNx membrane, which is immersed in potassium chloride solution. We can generate single conical and cylindrical pores with different electric pulses. A theoretical model based on the Poisson and Nernst-Planck equations is employed to simulate the ion transport properties in the channel. In turn, we can analyze pore geometries by fitting the experimental current-voltage (I-V) curves. for the conical pores with a pore size of 0.5-2nm in diameter, the slope angles are around -2.5% to -10%. Moreover, the pore orifice can be enlarged slightly by additional repeating pulses. The conic pore lumen becomes close to a cylindrical channel, resulting in a symmetry I-V transport under positive and negative biases. A qualitative understanding of these effects will help us to prepare useful solid-nanopores as demanded.
文摘The equilibrium and kinetic characteristics of the adsorption of erythromycin to Sepabeads SP825 were determined.The equilibrium data in a batch system was well described by a Langmuir isotherm.The separation performance was investigated in a fixed-bed system with respect to the adsorption superficial velocity,ionic strength and pH.A mathematical model was used to simulate the mass transfer mechanism,taking film mass transfer,pore diffusion and axial dispersion into account.The model predictions were consistent with the experi-mental data and were consequently used to determine the mass transfer coefficients.