Experience and Methods for Maize Regional Experiment in Guizhou Mountainous Areas

Maize regional experiment is a an intermediate link for overall assessment and comprehensive evaluation on yielding ability, stable yield, stress, adaptability, and quality traits of new maize varieties in different ecological conditions. It is an essential process for determining whether the new maize varieties can pass the ex- amination and approval for extension. Besides, regional experiment is an important link connecting agricultural scientific researches and agricultural production. In addi- tion, it is a scientific basis for extension and application of new maize varieties in a region. Therefore, the maize regional experiment is of the utmost importance.

Improved Double Deep Q Network Algorithm Based on Average Q-Value Estimation and Reward Redistribution for Robot Path Planning

By integrating deep neural networks with reinforcement learning,the Double Deep Q Network(DDQN)algorithm overcomes the limitations of Q-learning in handling continuous spaces and is widely applied in the path planning of mobile robots.However,the traditional DDQN algorithm suffers from sparse rewards and inefficient utilization of high-quality data.Targeting those problems,an improved DDQN algorithm based on average Q-value estimation and reward redistribution was proposed.First,to enhance the precision of the target Q-value,the average of multiple previously learned Q-values from the target Q network is used to replace the single Q-value from the current target Q network.Next,a reward redistribution mechanism is designed to overcome the sparse reward problem by adjusting the final reward of each action using the round reward from trajectory information.Additionally,a reward-prioritized experience selection method is introduced,which ranks experience samples according to reward values to ensure frequent utilization of high-quality data.Finally,simulation experiments are conducted to verify the effectiveness of the proposed algorithm in fixed-position scenario and random environments.The experimental results show that compared to the traditional DDQN algorithm,the proposed algorithm achieves shorter average running time,higher average return and fewer average steps.The performance of the proposed algorithm is improved by 11.43%in the fixed scenario and 8.33%in random environments.It not only plans economic and safe paths but also significantly improves efficiency and generalization in path planning,making it suitable for widespread application in autonomous navigation and industrial automation.

A Study on the Factors Influencing Value-Added in the Cruise Ship Value Chain Based on the DEMATEL-ISM Model

Cruise value chain is to take the exchange of cruise products and services as the core in a certain spatial scope,and enterprises with core advantages within or between different industries establish associations in accordance with certain technical and economic conditions,so as to realise the multi-dimensional extension and value appreciation of the cruise value chain in the vertical and horizontal links,and ultimately establish a chain-network type of enterprise strategic alliance.This paper tries to analyse the value-added factors of the cruise industry chain by constructing a multi-level hierarchical structural model with reference to the influencing factor analysis methods of relevant literature-DEMATEL(Decision Making Experiment and Evaluation Experiment)and ISM(Interpretative Structural Model).The study shows that the innovation and scale value-added module in the upstream of the cruise industry chain is the core module of value-added of the whole cruise industry chain,and the value-added mainly originates from the design and manufacturing of cruise ships.The middle reaches of the cruise industry chain are mainly cruise operation enterprises,and the specificity of cruise operation determines that its brand value-added is mainly accomplished through the global layout of multinational corporations,and the cruise brand is able to drive the consumption demand and has value-added ability.The downstream value-added of the cruise industry chain is mainly realised through the increase in profits of cruise tourism service products.

Nutrient Release Characteristics of Vinyl Chloride-Vinyl acetate Copolymers Coated SlowRelease Nitrogen Fertilizer and Its Effect on Soil Mineral Nitrogen

[Objective] The aim was to explore release characteristics of vinyl chlo- ride-vinyl acetate copolymer controlled-release N fertilizer and the effects on minerat nitrogen in soils. [Method] Vinyl chloride-vinyl acetate copolymer and hydroxyl-modi- fied VCNAc were taken as coating materials to prepare slow release fertilizer. Nutri- ent release characteristics of VC/VAc slow release fertilizer was evaluated by water immersion method and the effects of VC/VAc slow release fertilizer on mineral ni- trogen were researched by pot experiment. [Result] The release periods of VC-VAc controlled-release urea and hydroxyl-modified VC/VAc coated urea were 60 and 50 d, respectively. Furthermore, the content of ammonium nitrogen reached the peak on the 30th d and the content of nitrate nitrogen reached the peak on the 60th d in soils in treatments with VCNAc and hydroxyl-modified VC/VAc; the content of nitrate nitrogen rose again on the 120th d in the treatment with VC/VAc. In terms of wheat yield, different treatments showed insignificant differences and rice yield in the treatment with VCNAc was significantly higher than that in the treatment with hy- droxyl-modified VCNAc （P〈0.05）. [Conclusion] The release days of slow controlled- release fertilizer vary upon pot experiment method and water immersion method. Slow controlled-release fertilizer is not suitable for monoculture, due to long fertilizer efficiency, but multiple cropping would be optimal for its role to be fully exploited.

Tuning PID Parameters Based on a Combination of the Expert System and the Improved Genetic Algorithms

a new strategy combining an expert system and improved genetic algorithms is presented for tuning proportional-integral-derivative （PID） parameters for petrochemical processes. This retains the advantages of genetic algorithms, namely rapid convergence and attainment of the global optimum. Utilization of an orthogonal experiment method solves the determination of the genetic factors. Combination with an expert system can make best use of the actual experience of the plant operators. Simulation results of typical process systems examples show a good control performance and robustness.

Numerical Simulation and Experiment on Dam Break Problem

In this paper, two novel numerical computation methods are introduced which have been recently developed at Research Institute for Applied Mechanics （ R/AM ）, Kyushu University, for strongly nonlinear wave-body interaction problems, such as ship motions in rough seas and resulting green-water impact on deck. The first method is the CIP-based Cartesian grid method, in which the free surface flow is treated as a multi-phase flow which is solved using a Cartesian grid. The second method is the MPS method, which is a so-called particle method and hence no grid is used. The features and calculation procedures of these numerical methods are described. One validation computation against a newly conducted experiment on a dam break problem, which is also described in this paper, is presented.

Finite Element Simulation of Flexible Roll Forming with Supplemented Material Data and the Experimental Verification

Flexible roll forming is a promising manufacturing method for the production of variable cross section products. Considering the large plastic strain in this forming process which is much larger than that of uniform deformation phase of uniaxial tensile test, the widely adopted method of simulating the forming processes with non-supplemented material data from uniaxial tensile test will certainly lead to large error. To reduce this error, the material data is supplemented based on three constitutive models. Then a finite element model of a six passes flexible roll forming process is established based on the supplemented material data and the original material data from the uniaxial tensile test. The flexible roll forming experiment of a B pillar reinforcing plate is carried out to verify the proposed method. Final cross section shapes of the experimental and the simulated results are compared. It is shown that the simulation calculated with supplemented material data based on Swift model agrees well with the experimental results, while the simulation based on original material data could not predict the actual deformation accurately. The results indicate that this material supplement method is reliable and indispensible, and the simulation model can well reflect the real metal forming process. Detailed analysis of the distribution and history of plastic strain at different positions are performed. A new material data supplement method is proposed to tackle the problem which is ignored in other roll forming simulations, and thus the forming process simulation accuracy can be greatly improved.

Predictive Modeling and Parameter Optimization of Cutting Forces During Orbital Drilling

To optimize cutting control parameters and provide scientific evidence for controlling cutting forces,cutting force modeling and cutting control parameter optimization are researched with one tool adopted to orbital drill holes in aluminum alloy 6061.Firstly,four cutting control parameters(tool rotation speed,tool revolution speed,axial feeding pitch and tool revolution radius)and affecting cutting forces are identified after orbital drilling kinematics analysis.Secondly,hybrid level orthogonal experiment method is utilized in modeling experiment.By nonlinear regression analysis,two quadratic prediction models for axial and radial forces are established,where the above four control parameters are used as input variables.Then,model accuracy and cutting control parameters are analyzed.Upon axial and radial forces models,two optimal combinations of cutting control parameters are obtained for processing a13mm hole,corresponding to the minimum axial force and the radial force respectively.Finally,each optimal combination is applied in verification experiment.The verification experiment results of cutting force are in good agreement with prediction model,which confirms accracy of the research method in practical production.

Sensitivity Analysis and Optimization of Geometric Parameters of a New Fluid Bag Buffer Mechanism on Buffering Performance

A new fluid bag buffer mechanism,which can provide large axial stiffness under the small displacement,is designed.The dynamic change laws of the mechanism stiffness and the internal pressure of the fluid bag are studied when it is subjected to impact load.According to the protection performance for the flexible joint and the pressure change in the fluid bag during the impact process,the sensitivity of the geometric parameters of the fluid bag to the axial stiffness is analyzed by using the orthogonal experimental method,and the optimal parameter combination of the geometric parameters of the fluid bag under impact is obtained,leading to the displacement of the inner shell reduce by 41.4%.The results show that the internal pressure of the fluid bag is a rising process of oscillation and fluctuation.The sensitivity of the geometric parameters of the fluid bag to the displacement of the inner shell from high to low is as follows:Height H,radius r,wall thickness t,chamfer A.The correlation between the geometric parameters of the fluid bag and its internal pressure is:H is negatively correlated with the internal pressure,while the r,t,and A are positively correlated with the internal pressure.

Numerical and experimental studies on impact dynamics of a planar flexible multibody system

In this paper a computational methodology on impact dynamics of the flexible multibody system is presented. First, the floating frame of reference approach and nodal coordinates on the basis of finite element formulation are used to describe the kinematics of planar deformable bodies. According to the kinematic description of contact conditions, the contact constraint equations of planar flexible bodies are derived. Based on the varying topology technique the impact dynamic equations for a planar multibody system are established. Then the initial conditions of the equations in each contact stage are determined according to the discontinuity theory in continuum mechanics. The experiments between the aluminum rods are performed to check the correctness of the proposed method. Through the comparison between the numerical and experimental results the proposed method is validated. Experimental results also show that the impulse momentum method cannot accurately predict the complex impact dynamic phenomena and the continuous model may lead to a serious error when used to simulate the impact problems with significant wave propagation effects.

VIRTUAL EXPERIMENTAL ANALYSIS ON CLEANING ELEMENT OF SUGARCANE HARVESTER

The laws of influence of different factors have been analyzed in order to enhance the working efficiency and fatigue life of the cleaning element in brush shape of the sugarcane harvester. Based on the principle of orthogonal experiment design, the virtual-orthogonal-experimental analysis for the cleaning element is carried out on the finite element analysis （FEA） software-ANSYS after analyzing the nonlinear structural behavior in the working procedure. The results are analyzed with the overall balancing method, and then the optimal combination is got, which is made up of different levels of different factors. Also the optimal combination of design parameters of the cleaning element received fiom the virtual experimental analysis is conducted an experiment to confirm that the virtual analysis model and results are right, and the effect of factors on the function of the cleaning element is obtained by more analysis and further optimizing.

Trends in gravity changes from 2009 to 2013 derived from ground-based gravimetry and GRACE data in North China

North China is a key region for studying geophysical progress. In this study, ground-based and Gravity Recovery and Climate Experiment（GRACE） gravity data from 2009 to 2013 are used to calculate the gravity change rate（GCR） using the polynomial fitting method. In general, the study area was divided into the Shanxi rift, Jing-Jin-Ji（Beijing-Tianjin-Hebei Province）, and Bohai Bay Basin（BBB） regions. Results of the distribution of the GCR determined from ground-based gravimetry show that the GCR appears to be ＂negativepositive-negative＂ from west to east, which indicates that different geophysical mechanisms are involved in the tectonic activities of these regions. However, GRACE solutions are conducted over a larger spatial scale and are able to show a difference between southern and northern areas and a mass redistribution of land water storage.

Combined Size and Shape Optimization of Structures with DOE,RSM and GA

In this paper,size and shape optimization problem of a machine gun system is addressed with an efficient hybrid method,in which a novel and flexible mesh morphing technique is employed to achieve fast parameterization and modification of complexity structure without going back to CAD for reconstruction of geometric models or to finite element analysis（ FEA） for remodeling. Design of experiments（ DOE） and response surface method（ RSM） are applied to approximate the constitutive parameters of a machine gun system based on experimental tests. Further FEA,secondary development technique and genetic algorithm（ GA） are introduced to find all the optimal solutions in one go and the optimal design of the demonstrated machine gun system is obtained. Results of the rigid-flexible coupling dynamic analysis and exterior ballistics calculation validate the proposed methodology,which is relatively time-saving,reliable and has the potential to solve similar problems.

Technological Analysis on Motor Stall and Its Perspective

The brush lock is due to assembly tightly during assembling three gripper so that it curls after some time in motor and bare motors.The motor happen to have current decreasing and cause rotary too slowly is an important technique problem.At last the motor hasn’t worked due to disconnection.It give company to bring assembly issue for customers.So the motor stall is main issue in motor working.We shall pay more attention to it necessarily and shall be strict quality inspection and we shall monitor the flow line for the sake of decreasing it.We shall solve the problem as soon as possible and communicate with the customer engineers.Unloaded rotation is radical in the base inspection.The engineer need to negotiate with supplying engineers for the qualified material of brush.Increasing inspection into more times is a method to decrease unqualified brushes.Some experiment method is explained to analyze for customer engineers.Two kinds of motors ie.stepping and asynchronous motor and motors used in future in car is explained to further knowledge to motor’s application.Such as the experiment with torque,voice and electric voltage converter.The pseudo soldering results the slow rotary.The reverse voltage is a reason for a motor to slow rotary even stall.

Natural Monopoly and Mixed Ownership Reform--Based on Natural Experiment and Cost Function Analysis Method

Despite a multitude of theoretical discussions on China's mixed ownership reform, very few studies have addressed realistic questions concerning the implementation of the reform. The Resolutions of the Third Plenum of the 18 th CPC Central Committee and other reform strategies have outlined the reform of sectors with natural monopoly, including urban public utility sectors. The question is how mixed ownership reform should be carried out in sectors of natural monopoly, or which public utilities sectors should enjoy priority of mixed ownership reform. To answer this question, this paper employs data of large public utility enterprises in China from 1998 to 2008, and estimates the natural monopoly attribute at the industry level and corporate total factor productivity(TFP) using cost function analysis method excluding the impact of product price factor. Based on the difference-indifferences-in-differences(DDD) method of natural experiment, an empirical test is carried out for the relationship among natural monopoly, mixed ownership reform and corporate productivity. Our results suggest that:(1) Statistically, mixed ownership reform cannot significantly increase corporate TFP in sectors with natural monopoly;(2) mixed ownership reform should not be carried out indiscriminately on a nationwide basis and for all public utilities sectors. Such an attempt of reform without distinguishing natural monopoly and the level of competitiveness is fraught with policy uncertainties;(3) relative to sectors with natural monopoly, corporate productivity in competitive sectors after mixed ownership reform will improve more significantly and enjoy greater "policy dividends" of institutional reform. Therefore, mixed ownership reform should be carried out first in competitive sectors.

MODAL ANALYSIS OF A CHASSIS FRAME OF A HEAVY LECTRA HAUL

The chassis frame of a heavy lectra haul is analysed by both modal experiment method and finite element method (FEM ) . The first ten order modal parameters of the chassis frame have been obtained satisfactorily. These parameters have important reference value in designing the chassis frame properly and provide a necessary basis for the fault diagnostics of the truck.

Numerical investigation on thermomechanical behavior of alumina–calcium hexaluminate refractories for purging plug

Alumina–spinel refractories used in slit-type purging plugs are susceptible to cross-sectional damage,resulting in a serious mismatch between their service life and that of ladle.Alumina–calcium hexaluminate refractories have gradually become the new trend in purging plug materials with the development of refining technology.The thermomechanical damage of slit-type purging plugs with alumina–calcium hexaluminate refractory was investigated by the thermo-solid coupling simulation.Combined with the polynomial fitting and design of experiments methods,the influence of thermophysical parameters on temperature and thermal stress of alumina–calcium hexaluminate refractories for purging plugs was systematically analyzed.The results show that the maximum thermal stress of the purging plugs appears during the stages of steel transporting and stirring,and the vulnerable parts are located above Y=0.323 m.The thermal conductivity and the coefficient of thermal expansion of the material are the most sensitive parameters to the temperature and thermal stress inside the structure,respectively.The addition of more calcium hexaluminate can relieve the stress concentration and large deformation around the slits.Consequently,when the content of calcium hexaluminate is 47 wt.%and in the form of aggregate-binder,the temperature and thermal stress distribution inside the refractory are optimal,which can effectively improve the service life of the slit-type purging plug.

Effects of Machine Tool Configuration on Its Dynamics Based on Orthogonal Experiment Method

In order to analyze the influence of configuration parameters on dynamic characteristics of machine tools in the working space, the configuration parameters have been suggested based on the orthogonal experiment method. Dynamic analysis of a milling machine, which is newly designed for producing turbine blades, has been conducted by utilizing the modal synthesis method. The finite element model is verified and updated by experimental modal analysis （EMA） of the machine tool. The result gained by modal synthesis method is compared with whole-model finite element method （FEM） result as well. According to the orthogonal experiment method, four configuration parameters of machine tool are considered as four factors for dynamic characteristics. The influence of configuration parameters on the first three natural frequencies is obtained by range analysis. It is pointed out that configuration parameter is the most important factor affecting the fundamental frequency of machine tools, and configuration parameter has less effect on lower-order modes of the system than others. The combination of configuration parameters which makes the fundamental frequency reach the maximum value is provided. Through demonstration, the conclusion can be drawn that the influence of configuration parameters on the natural frequencies of machine tools can be analyzed explicitly by the orthogonal experiment method, which offers a new method for estimating the dynamic characteristics of machine tools.

Excavation collapse of Hangzhou subway station in soft clay and numerical investigation based on orthogonal experiment method

This paper studies the excavation collapse at the Xianghu subway station on Hangzhou metro line 1.The objective is to present an overview of this case study and discuss the cause of the failure.Through field investigation and preliminary analysis,the reasons for the excavation collapse were the misuse of the soil parameters,over excavation,incorrect installation of steel struts,invalid monitoring data,and inadequate ground improvement.Finally,a small strain constitutive model was used for further analysis.In order to estimate damage efficiently,the orthogonal array(OA) was introduced for screening the key factor in the numerical experiments.Six estimated indexes including deformations and internal forces of the excavation were taken,and the effectiveness of four factors which may cause the collapse was evaluated.Through numerical experiments and interaction analysis,it is found that the deformation and internal force can be well controlled by jet grouting of the subsoil under the final cutting surface,but increasing the improvement ratio of the jet grouting cannot help optimize the excavation behavior efficiently,and without jet grouting and the fourth level struts,the deformation and internal force of the excavation in this case will far surpass the allowable value.

Experimental research of condensate blockage and mitigating effect of gas injection

The condensate blockage causes a substantial decrease in well productivity for gas condensate reservoirs.Based on the previous studies,a novel experimental method was designed to evaluate condensate blockage and the mitigating effect of gas injection.The method considers the stacking effect in the near wellbore region and the gas flow in the far wellbore region.There is an intermediate vessel containing condensate gas at the entrance of core holder in the experimental apparatus.In the process of pressure depletion experiment in a long core model,the vessel is connected to the core and the pressure of the vessel remains above the dew point pressure.The seriousness of condensate blockage is investigated by this research.When pressure drops to maximum retrograde condensation pressure,the gas permeability decreases by 80%compared with the initial gas permeability.Contrastive experiments were conducted to study the removal effect of different injection fluids and different injection volumes.The results show that CO2 injection is more effective than methanol in mitigating condensate blockage and the optimal CO2 injection volume is around 0.15 HCPV。