RECONSTRUCTION OF PART OF AN ACTUAL BLAST-WAVE FLOW FIELD TO AGREE WITH EXPERIMENTAL DATA BY USING NUMERICAL METHOD WITH HIGH IDENTIFICATION

In this paper, on the basis of experimental data of two kinds of chemical explosions, the piston-pushing model of spherical blast-waves and the second-order Godunov-type scheme of finite difference methods with high identification to discontinuity are used to the numerical reconstruction of part of an actual hemispherical blast-wave flow field by properly adjusting the moving bounary conditions of a piston. This method is simple and reliable. It is suitable to the evaluation of effects of the blast-wave flow field away from the explosion center.

Comparative Study of Micro and Nano Size WO3/E44 Epoxy Composite as Gamma Radiation Shielding Using MCNP and Experiment

The radiation shielding characteristics of 50wt% WO3/E44 epoxy composite in various gamma energies from 80 keV to 1.33 MeV are investigated via the MCNP code. Thus two scales are considered for WOa filler particles： micro and nano with sizes of i #m and 5Onto, respectively. The simulation results show that W03 nano particles exhibit a larger increase in linear attenuation coefficient in comparison with micro size particles. Finally, validation of simulation results with the published experimental data shows a good agreement.

Experimental Study Enhancing the Chemosensitivityof Multiple Myeloma to Melphalan by Using a Tissue-Specific APE1-Silencing RNA Expression Vector

Introduction:Multiple myeloma (MM) is a geriatric disease with onset at an average age of approximately 61 years.With the aging of the population,the incidence rate of MM is climbing.In the United States,the annual incidence rate of MM is 2-5/100,000.Multiple myeloma accounts for approximately 1% of all tumor eases and slightly 】10% of cases with hematologic malignancy.Although an

Experimental Investigation of the Natural and Forced Convection on Solidification of Sn-3wt.%Pb Alloy Using a Benchmark Experiment

We deal with the development of a solidification benchmark experiment in order to investigate the structure formation as well as solute macro-mesosegregation,by means of a well-controlled solidification experiment.The experiment consists in solidifying a rectangular ingot of Sn-3wt.%Pb alloy,by using two lateral heat exchangers which allow extraction of the heat flux from one or two vertical sides of the sample.The domain is a quasi two dimensional parallepipedic ingot(100×60×10)mm.The temperature difference AT between the two lateral sides is 40 K and the cooling rate CR=0.03 K/s.The instrumentation consists in recording the instantaneous temperature maps by means of an array of 50 thermocouples in order to provide the time evolution of the isotherms.After each experiment the patterns of the segregations have been obtained by X-ray radiograph and confirmed by eutectic fraction measurements.The local solute distribution determined by means of induction coupled plasma analysis is provided.The originality of the present study is to examine the effect of the forced convection driven by a travelling magnetic field(TMF)induced by a linear inductor located on the bottom part of the sample.A periodically reversed stirring with a modulation frequency equal to 0.5 Hz stirring have been investigated.This study allows us to evaluate the evolution due to the forced convection induced by a TMF field,as well as its influence on the initial conditions,the solidification macrostructure and the segregation behavior.Measurements of the velocity field by ultrasonic Doppler velocimetry(UDV)method in a Ga-In-Sn pool were performed and transposed to the tin-lead alloy case before solidification.Post-mortem patterns of the macromesosegregations have been obtained by X-ray radiography.The results show the transport effects of the flow on both the maerosegregations and the channel formation.The reversal of the TMF produces a decrease of the level of mesosegregations,namely channel formation.

Experimental demonstration of underwater optical wireless power transfer using a laser diode

We experimentally demonstrate an underwater optical wireless power transfer （OWPT） using a laser diode （LD） as a power transmitter. We investigate the characteristics of a solar cell and a photodiode （PD） as a power receiver. We optimize the LD, the PD, and the solar cell to achieve the maximum transfer efficiency. The maxi- mum transfer efficiency of the back-to-back OWPT is measured as 4.3% with the PD receiver. Subsequently, we demonstrate the OWPT in tap and sea water. Our result shows an attenuation of 3 dB/m in sea water.

Experimental study enhancing the chemosensitivity of multiple myeloma to melphalan by using atissue-specific APE1-siencing RNA expression vector

Introduction:Multiple myeloma(MM)is a geriatric dis-ease with onset at an average age of approximately 61years.With the aging of the population,the incidence rate ofMM is climbing.In the United States,the annual incidence

An experiment for obtaining DOP ellipsoid using particle swarm optimization algorithm

The degree of polarization (DOP) ellipsoid can be used as either feedback or feedforward signal for automatic polarization mode dispersion compensation. We have realized the experiment for obtaining DOP ellipsoid from 100 sampling data of output states of polarization using particle swarm optimization (PSO) as ellipsoid data fitting algorithm. It was shown that the PSO algorithm was powerful for ellipsoid data fitting with high precision within 250 ms.