Depositional model of the Member Deng-2 marginal microbial mound-bank complex of the Dengying Formation in the southwestern Sichuan Basin, SW China: Implications for the Ediacaran microbial mound construction and hydrocarbon exploration

Recent advances in hydrocarbon exploration have been made in the Member Deng-2 marginal microbial mound-bank complex reservoirs of the Dengying Formation in the western Sichuan Basin, SW China,where the depositional process is regarded confusing. The microfacies, construction types, and depositional model of the Member Deng-2 marginal microbial mound-bank complex have been investigated using unmanned aerial vehicle photography, outcrop section investigation, thin section identification,and seismic reflections in the southwestern Sichuan Basin. The microbialite lithologic textures in this region include thrombolite, dendrolite, stromatolite, fenestral stromatolite, spongiostromata stone,oncolite, aggregated grainstone, and botryoidal grapestone. Based on the comprehensive analysis of“depositional fabrics-lithology-microfacies”, an association between a fore mound, mound framework,and back mound subfacies has been proposed based on water depth, current direction, energy level and lithologic assemblages. The microfacies of the mound base, mound core, mound flank, mound cap, and mound flat could be recognized among the mound framework subfacies. Two construction types of marginal microbial mound-bank complex have been determined based on deposition location, mound scale, migration direction, and sedimentary facies association. Type Jinkouhe microbial mound constructions(TJMMCs) develop along the windward margin owing to their proximity to the seaward subfacies fore mound, with a northeastwardly migrated microbial mound on top of the mud mound,exhibiting the characteristics of large-sized mounds and small-sized banks in the surrounding area. Type E'bian microbial mound constructions(TEMMCs) primarily occur on the leeward margin, resulting from the presence of onshore back mound subfacies, with the smaller southwestward migrated microbial mounds existing on a thicker microbial flat. The platform margin microbial mound depositional model can be correlated with certain lateral comparison profile and seismic reflection structures in the 2D seismic section, which can provide references for future worldwide exploration. Microbial mounds with larger buildups and thicker vertical reservoirs are typically targeted on the windward margin, while small-sized microbial mounds and flats with better lateral connections are typically focused on the leeward margin.

Structural geometry of orogenic gold deposits： Implications for exploration of world-class and giant deposits

With very few exceptions, orogenic gold deposits formed in subduction-related tectonic settings in accretionary to collisional orogenic belts from Archean to Tertiary times. Their genesis, including metal and fluid source, fluid pathways, depositional mechanisms, and timing relative to regional structural and metamorphic events, continues to be controversial. However, there is now general agreement that these deposits formed from metamorphic fluids, either from metamorphism of intra-basinal rock sequences or de-volatilization of a subducted sediment wedge, during a change from a compressional to transpressional, less commonly transtensional, stress regime, prior to orogenic collapse. In the case of Archean and Paleoproterozoic deposits, the formation of orogenic gold deposits was one of the last events prior to cratonization. The late timing of orogenic gold deposits within the structural evolution of the host orogen implies that any earlier structures may be mineralized and that the current structural geometry of the gold deposits is equivalent to that at the time of their formation provided that there has been no significant post-gold orogenic overprint. Within the host volcano-sedimentary sequences at the province scale, world-class orogenic gold deposits are most commonly located in second-order structures adjacent to crustal scale faults and shear zones, representing the first-order ore-forming fluid pathways, and whose deep lithospheric connection is marked by lamprophyre intrusions which, however, have no direct genetic association with gold deposition. More specifically, the gold deposits are located adjacent to ～10°-25° district-scale jogs in these crustal-scale faults. These jogs are commonly the site of arrays of ～70° cross faults that accommodate the bending of the more rigid components, for example volcanic rocks and intrusive sills, of the host belts. Rotation of blocks between these accommodation faults causes failure of more competent units and/or reactivation and dilation of pre-existing structures, leading to deposit-scale focussing of ore-fluid and gold deposition.Anticlinal or antiformal fold hinges, particularly those of ＇locked-up＇ folds with ～30° apical angles and overturned back limbs, represent sites of brittle-ductile rock failure and provide one of the more robust parameters for location of orogenic gold deposits.In orogenic belts with abundant pre-gold granitic intrusions, particularly Precambrian granitegreenstone terranes, the boundaries between the rigid granitic bodies and more ductile greenstone sequences are commonly sites of heterogeneous stress and inhomogeneous strain. Thus, contacts between granitic intrusions and volcano-sedimentary sequences are common sites of ore-fluid infiltration and gold deposition. For orogenic gold deposits at deeper crustal levels, ore-forming fluids are commonly focused along strain gradients between more compressional zones where volcano-sedimentary sequences are thinned and relatively more extensional zones where they are thickened. World-class orogenic gold deposits are commonly located in the deformed volcano-sedimentary sequences in such strain gradients adjacent to triple-point junctions defined by the granitic intrusions, or along the zones of assembly of micro-blocks on a regional scale. These repetitive province to district-scale geometrical patterns of structures within the orogenic belts are clearly critical parameters in geology-based exploration targeting for orogenic gold deposits.

Province-scale commonalities of some world-class gold deposits:Implications for mineral exploration

Discovery rates for all metals, including gold, are declining, the cost per significant discovery is increasing sharply, and the economic situation of the industry is one of low base rate. The current hierarchical structure of the exploration and mining industry makes this situation difficult to redress. Economic geologists can do little to influence the required changes to the overall structure and philosophy of an industry driven by business rather than geological principles, However, it should be possible to follow the lead of the oil industry and improve the success rate of greenfield exploration, necessary for the next group of lower-exploration-spend significant mineral deposit discoveries. Here we promote the concept that mineral explorers need to carefully consider the scale at which their exploration targets are viewed. It is necessary to carefully assess the potential of drill targets in terms of terrane to province to district scale, rather than deposit scale, where most current economic geology research and conceptual thinking is concentrated. If orogenic, IRGD, Carlin-style and IOCG gold-rich systems are viewed at the deposit scale, they appear quite different in terms of conventionally adop- ted research parameters. However, recent models for these deposit styles show increasingly similar source-region parameters when viewed at the lithosphere scale, suggesting common tectonic settings. It is only by assessing individual targets in their tectonic context that they can be more reliably ranked in terms of potential to provide a significant drill discovery. Targets adjacent to craton margins, other lithosphere boundaries, and suture zones are clearly favoured for all of these gold deposit styles, and such exploration could lead to incidental discovery of major deposits of other metals sited along the same tectonic boundaries.

Coordinated Exploration Model and its Application to Coal and Coal-associated Deposits in Coal Basins of China

China is a top world producer of coal resources with numerous coal-rich basins country-wide that also contain coalbed methane(CBM),an unconventional natural gas resource.Recent exploration of coal and CBM resources has also led to the discovery of rare,precious,and scattered metal minerals,including sandstone-type U and Ga–Ge–Li.High-grade and industrial-value deposits have been discovered in the Ordos,Junggar,and other basins across China during exploration for coal resources.Application of coordinated exploration theories and techniques in multiple energy and coal-associated ore deposits,such as coal and unconventional natural gas in coal,achieves efficient and practical exploration of natural resources.Based on the systematic study of accumulation and occurrence of coal and coal-associated mineral resources in coal basins,the basic idea of coordinated exploration for coal and coal-associated deposits is proposed,and multi-targets and multi-methods based on a coordinated exploration model of coal-associated deposits is developed.Coordinated exploration expands the main exploration objective from coal seams to coal-associated series,extending the exploration target from targeting coal only to coal-associated deposits.Entrance times for exploration are decreased to realize coordinated exploration for coal,unconventional natural gas and syngenetic/associated mineral resources in coal by implementing a’one-time approach’―one time in and out of a coal seam to minimize disturbance and time needed for extraction.According to the differences of geological background in China’s coal basins,four coordinated exploration model types,including co-exploration of coal and coal-associated unconventional natural gas,coal and solid minerals,coal and metal minerals,and coal with water resources are established.Other models discussed include a multi-target coordinated exploration model for the combination of coal,coal-associated gas,solid minerals,and metal minerals accordingly.The exploration techniques of coal and coal-associated resources include regional geological investigation and research and synthetic application of other techniques including seismic surveys,drilling,logging,and geochemical exploration.Particularly,applying the’multi-purpose drill hole’or reworking coalfield drill holes into parameter wells,adding sample testing and logging wells,determining gas-bearing layers by logging and gas content measurement,jointly measuring multiple logging parameters,sampling,and testing of coal-strata help in the exploration and evaluation of coal resources,coal-associated unconventional natural gas resources,and coal-associated element minerals.Accordingly,a system of integrated Space–Air–Ground exploration techniques for coordinated exploration of coal and coal-associated minerals is established.This includes high-resolution,hyperspectral remote-sensing technique,high-precision geophysical exploration and fast,precise drilling,testing of experimental samples,as well as coordinated exploration and determination methods of multi-target factors,multi-exploration means,multi-parameter configuration and optimization,big data fusions and interpretation techniques.In recent years,the application of this integrated system has brought significant breakthroughs in coal exploration in Inner Mongolia,Xinjiang and other provinces,discovering several large,ten-billionton coalfields,such as the Eastern Junggar and Tuha basins,and also in exploration and development of CBM from lowrank coals in Fukang,Xinjiang,discovery the Daying U Deposit in Inner Mongolia,the Junggar Ultralarge Ga Deposit,Lincang,Yunnan,and the Wulantuga,Inner Mongolia,Ge-bearing coal deposits,and the Pingshuo Ultralarge Li–Ge Deposit.

Research and exploration progress on lithium deposits in China

Since 2012,some advances have been made through the resource investigation,metallogenesis research,and comprehensive utilizing of lithium deposits in China.Firstly,the progress of lithium exploration has been made in Sichuan,Xinjiang,Qinghai and Jiangxi provinces(autonomous region).Li deposits are not only found within the pegmatite rocks but also within the granitic rocks and sedimentary rocks.Secondly,the methods of geological survey,geochemical and geophysical exploration,remote sensing technology and even drilling technology have been improved,which can be delineating orebodies quickly.Thirdly,the mechanisms of Li mineralization were summarized by analyzing the relationship between the Li contents and kinds of geological phenomena.Based on practice,a new understanding of"multi-cycle,deep circulation,integration of internal and external"metallogenic mechanism or"MDIE"metallogenic mechanism for short has been put forwarded further in this paper,and the"five levels+basement"exploration model has been successfully expanded to guide the prospecting work both in the Jiajika and Keeryin pegmatite ore fields in western Sichuan Province.Besides,new progress has been made in the aspect of amblygonite deposits of granite-type and hydrothermal type in the Mufushan-Jiuling ore district,which points out a new direction for prospecting new types of lithium deposits in China.

Discovery of lacustrine shale deposits in the Yanshan Orogenic Belt,China: Implications for hydrocarbon exploration

The mechanism of formation of lacustrine deposits within stable orogenic belts and their potential for shale oil and gas exploration are frontier themes of challenge in the fields of sedimentology and petroleum exploration. Orogenic belts witness strong tectonic activities and normally cannot host stable lacustrine basins and deep shale formations. Therefore, basins in orogenic belts are considered to have no potential to form shale hydrocarbon reservoirs. Here we investigate the Luanping Basin located in the Yanshan orogenic belt where previous studies regarded rivers and fan deltas as the major main Mesozoic deposits. Based on detailed field exploration and scientific drilling, we report the finding of a large number of lacustrine shale continental deep-water deposits in the Mesozoic strata. Our finding of the occurrence of active shale oil and gas also in this basin also subvert the previous perceptions.We report SHRIMP zircon U-Pb age that define the bottom boundary of the target interval as 127.6 ± 1.7 Ma belonging to the early Cretaceous strata. Tectonics and climate are considered to be the main factors that controlled the deep-water sedimentation during this period. The drill cores revealed evidence of shale gas and the TOC of shale is 0.33%–3.60%, with an average value of 1.39% and Ro is 0.84%–1.21%, with an average value of 1.002%. The brittleness index of shale is between 52.7% and 100%. After vertical well fracturing, the daily gas production is more than 1000 m^(3). Our findings show that the basin has considerable potential for shale oil and gas. The geological resources of the shale gas in the Xiguayuan Fm. are estimated as 1110.12 × 10^(8) m^(3), with shale oil geological resources of 3340.152 × 10^(4) t. Our findings indicate that the Yanshan orogenic belt has potential exploration prospect. This work not only redefines the Luanping Basin as a rift deep-water Mesozoic Lake Basin, but also rules out the previous notion that the basin is dominated by shallow water sediments. The discovery of shale oil and gas also provides an important reference for subsequent petroleum exploration and development in this basin. Our study shows that shale oil and gas reservoirs can be found in the lacustrine basins of orogenic belts which were strongly influenced by volcanism. These results have significant implications for the sedimentology and oil exploration in the Qinling and Xingmeng Orogenic Belts of China, as well as those in other terranes of the world including the New England Orogenic Belt in Australia.

The characteristics, formation and exploration progress of the potash deposits on the Khorat Plateau, Thailand and Laos, Southeast Asia

The giant potash deposit on the Khorat Plateau is one of the most promising targets for exploitation of potassium salts.So far,many researches and geologic survey have been conducted on the giant potash deposits.Hence,it is necessary to make an overall review on the potash deposits.The potash deposit on the Khorat Plateau was formed during the Middle to Late Cretaceous,during which seawater was enriched in Ca2+and depleted in SO42-compared with those of modern seawater.In addition to seawater,continental water and hydrothermal fluids could have affected the evaporite basins.The seawater was probably derived from Tethys ocean,and the brine should have evaporated to some extent before entering into the basin systems based on the evidence of absence of carbonates and unproportionate sulphate compared with chloride salts.The paleo-climate during Middle to Late Cretaceous was characterized as high temperature and extremely arid environment,which is favourable for deposition of potassium-magnesium saline minerals.The major saline minerals are of anhydrite,halite,carnallite,sylvite and,tachyhydrite,with trace amounts of borates.The resources of the potash deposit on the Khorat Plateau could be approximately as much as 400×109 t of carnallite and 7×109 t of sylvite.The evaporite sequences have been deformed and altered by postdepositinal processes,including tectonic movements and chemical alteration.Salt domes were formed in the postdepositional processes.Based on the analyses of geophysical surveys and drilling projects,high-quality sylvinite ores are commonly found at the flanks of those salt domes due to incongruent dissolution of carnallite.The furure potential prospecting areas for the highquality sylvinite ores would be on the edges of the Khorat Plateau.

Application of Lead Isotopes to Geochemical Exploration of Gold Deposits in Baoban,Hainan Province, China

Lead isotopes have been widely applied in geochemical explora tion and evaluation of ore deposits, as well as in ascertaining the age of miner alization and the source of ore fluids. Long-term practice showed that the meth od of lead isotope targeting is somewhat efficient for macroscopic evaluation of forecasting areas, but not powerful enough for forecasting concealed orebodies. As the contents of U and the variation of U/Pb ratio sharply decrease with dept h in the lithosphere, U-Th-Pb isotopic differentiation must have occurred duri ng the crust-mantle evolution. Lead isotopic ratios show a wide variation range , varying in the front of mineralization and shallow-derived ores, but maintain ing very stable in the major orebody and being usually close to the average isot opic composition of the crust and mantle of the continent block from which the o res were derived. Therefore, the lead isotopic composition can serve as a measur e for identifying the position of mineralization. The lead isotope geochemistry was applied to the exploration and evaluation of the Baoban gold deposits of Hai nan Province, China. The analytical results of ore veins and adjacent rocks show ed that there is a correlation between the lead isotope data and the position of orebody. Based on the experience from the Baoban gold deposits and other ore de posits in Yunnan Province, an exploration principle has been established, that i s, positive anomalies of lead isotope eigenvectors for prospecting deep-seated orebodies and negative anomalies of eigenvectors for enlarging lateral explorati on surrounding the known deposit. The ore beds in the Erjia and Beiniu mining di stricts should be assigned to the deep part of the orebody and those in the Tuwa ishan mining district should be the shallow part, so ore beds corresponding to t hose in the Erjia and Beiniu mining districts may be found in the Tuwaishan mini ng district.

China's Technologies for Exploration and Mining of Uranium Deposits Have Stepped into the World's Top Team

On June 2011, the Beijing Research Institute of Uranium Geology, an Institute within the China National Nuclear Corporation （CNNC）, and the Department of Geology ＆ Mining CNNC carried out a project Scientific Drilling.for Deep Metallogenic Research in the Xiangshan Large Uranium Ore Field. A year later on June 21, the project, representing the first scientific drilling of China＇s uranium, was officially launched, and successfully completed on June 17, 2013. A 2818.88 m of drilling depth has broken the previous record 1200 m of exploration depth.

Geological - Geophysical - Geochemical Exploration Models of Copper - Iron Deposits in Southeastern Hubei

This paper discusses geological-geophysical-geochemical models of such typical deposits as the Tieshan-type Fe-Cu deposit, the Tonglushan-type Cu-Fe deposit, the Yehuaxiang-type Cu deposit, the Jiguanzui-type Cu-Au deposit, and the Tongshankou-type Cu (Mo) deposit. The models were established based on practical data of the polymetallic deposits dominated by copper ore in southeastern Hubei. These models, which are graphically illustrated in the paper, systematically summarize the metallogenic geological conditions and the geophysical-geochemical characteristics of copper deposits in this area. The models are of practical significance for studying copper deposits, predicting mineral resources, choosing exploration methods, and searching for ore deposits based on existing ones in the study area.

Unconventional Geochemical Exploration for Gold Deposits

Conventional geochemical exploration for gold deposits has not always been very satisfactory, especially for buried and blind ones. New considerations and methodology in sampling, analysis and interpretation have been developed in China during the past decade. Important considerations for unconventional gold exploration in this paper are that (1) gold is active in surface environments; (2) gold occurs not only as discrete grains, but also as ultrafine particles (submicron?to nanometer-sized particles of gold) and other complex forms; (3) regional low anomalies and superimposed anomalies over buried gold deposits are produced by ultrafine gold grains and other complex forms of gold. The methodology based on these considerations has been developed both in regional and in local geochemical exploration for gold. Examples of the preliminary application of these methods in two areas covered by transported overburden are given.

Classification,metallogenesis and exploration of silver deposits in Daxing’anling of Inner Mongolia and its adjacent areas

By the end of 2020,83 silver deposits(or ore occurrences),including four super-large-scale deposits,nine large-scale deposits,33 medium-scale deposits and 37 small-scale deposits or ore occurrences,have been proved.The amount of silver metal exceeds 86000 t with average grade of 100 g/t,which makes Daxing’anling region one of the the most important silver ore belt in China.However,the metallogenic characteristics and metallogenesis need to be clarified.The silver deposits in the study area are classified into three main types,which are magmatic hydrothermal vein type,continental volcano-subvolcanic type and skarn type,respectively.The supergiant deposits include the Shuangjianzishan deposit(silver metal amount of 15214 t with average grade of 138 g/t),the Baiyinchagandongshan deposit(silver metal amount of 9446 t with average grade of 187 g/t),the Huaobaote deposit(silver metal amount of 6852 t with average grade of 170 g/t),and the Fuxingtun deposit(silver metal amount of 5240 t with average grade of 196 g/t).The silver deposits are mainly distributed in the central and south of the Daxing’anling area,and mainly formed in the Yanshanian period.The silver polymetallic deposits in the Daxinganling area are significantly controlled by regional faults and the junction zone of volcanic rock basins and their margins.The north-east trending deep faults are the most important ore-controlling structures in this area.The distribution of silver polymetallic deposits along the main faults is obvious,and the intersection area of multiple groups of faults often form important mine catchments.The Permian is the most important ore-bearing formation in this area,but some important silver polymetallic deposits occur in Mesozoic volcanic basins or pre-Mesozoic strata.The magmatic rocks related to mineralization are mainly intermediate acidic or acidic intrusions,intermediate acidic lavas,pyroclastic rocks,and small intrusions of ultra-shallow or shallow facies of the Yanshanian Period.The mineralization element combination is mainly determined by the elemental geochemical background of surrounding rocks or source layers.In addition,the type of deposit,the distance from the mineralization center,and the degree of differentiation of ore-forming rock mass are also important influence factors.The article analyzes the prospecting prospects of each silver deposit type in the study area,discusses the relationship between mineralization center and deep prospecting,and proposes that porphyry silver deposits should be paid attention to.In the prospecting and exploration of silver deposits,comprehensive evaluation and multi-target prospecting need to be strengthened because silver can coexist or be associated with a variety of metals.

Decrepitation Thermometry and Compositions of Fluid Inclusions of the Damoqujia Gold Deposit,Jiaodong Gold Province,China:Implications for Metallogeny and Exploration

The recently discovered Damoqujia （大磨曲家） gold deposit is a large shear zone-hosted gold deposit of disseminated sulphides located in the north of the Zhaoping （招平） fault zone, Jiaodong （胶东） gold province, China. In order to distinguish the temperature range of cluster inclusions from different mineralization stages and measure their compositions, 16 fluid inclusions and 5 isotopic geochemistry samples were collected for this study. Corresponding to different mineralization stages, the multirange peaks of quartz decrepitation temperature （250-270, 310-360 and 380-430℃） indicate that the activity of ore-forming fluids is characterized by multistage. The ore-forming fluids were predominantly of high-temperature fluid system （HTFS） by CO2-rich, and SO4^2--K^＋ type magmatic fluid during the early stage of mineralization and were subsequently affected by low-temperature fluid system （LTFS） of CH4-rich, and Cl^--Na^＋/Ca^2＋ type meteoric fluid during the late stage of mineralization. Gold is transferred by Au-HS^- complex in the HTFS, and Au-Cl^- complex can be more important in the LTFS. The transition of fluids from deeper to shallow environments results in mixing between the HTFS and LTFS, which might be one of the most key reasons for gold precipitation and large-scale mineralization. The ore-forming fluids are characterized by high-temperature, strong-activity, and superimposed mineralization, so that there is a great probability of forming large and rich ore deposit in the Damoqujia gold deposit. The main bodies are preserved and extend toward deeper parts, thereby suggesting a great potential in future.

Geophysical-Geological Interpretation and Deep-Seated Gold Deposit Prospecting in Sanshandong-Jiaojia Area, Eastern Shandong Province, China

Integrated gravitational, electrical-magnetic surveys and data processing carried out in the Sanshandao-Jiaojia area, Eastern Shandong Province, northeast China, aim to illuminate the geological characteristics of this shallow-covered area and delineate deep-seated gold prospecting targets. In this region, altogether 12 faults exert critical control on distribution of three types of Early Precambrian metamorphic rock series, i.e. those in the metamorphic rock area, in the granitic rock area underlying the metamorphic rock, and in the remnant metamorphic rock area in granites, respectively. Additionally, the faults have major effects on distribution of four Mesozoic Linglong rock bodies of granite, i.e. the Cangshang, Liangguo, Zhuqiao-Miaojia and Jincheng granites. The Sanshandao and Jiaojia Faults are two well-known regional ore-controlling faults; they have opposite dip direction, and intersect at a depth of 4500 m. Fracture alteration zones have striking geophysical differences relative to the surrounding county rocks. The two faults extend down along dip direction in a gentle wave form, and appear at some steps with different dips. These steps comprise favorable gold prospecting areas, consistent with a step metallogenic model. Six deep-seated gold-prospecting targets are delineated, i.e. Jincheng-Qianchenjia, Xiaoxizhuang-Zhaoxian, Xiyou-Wujiazhuangzi, Xiangyangling-Xinlicun, Panjiawuzi and Miaojia-Pinglidian.

Ore-forming and Exploration Models of the Baguamiao Gold Deposit,Shaanxi Province

The Baguamiao superlarge gold deposit in Shaanxi Province is one of the typical cases in China that are hosted by sedimentary rocks. Explorers and researchers have discussed the gold mineralization enrichment conditions by studying sulphur, oxygen, carbon, silicon stable isotopes and mineralizing fluid features of the Baguamiao gold deposit and proposed a hydrothermal sedimentation-magmatic reconstructing gold mineralization model featuring multi-sources of ore-forming materials and multistage mineralizations. In addition, prospecting for “Baguamiao-type” gold deposits was started in the Fengtai Basin and a great number of important prospecting targets such as Tonglinggou, Simaoling, Guoansi and Dachaigou were discovered.

Geology, geochronology, and exploration of the Jiama giant porphyry copper deposit (11 Mt), Tibet, China: A review

Jiama,with more than 11 Mt of copper metal,is the largest porphyry-skarn copper system in the Gangdese metallogenic belt,Tibet,China,creating ideal conditions for deciphering the origin of porphyry ores in a collision setting.Despite massive studies of the geology,chronology,petrogenesis,and ore-related fluids and their sources in Jiama,there is a lack of systematic summaries and reviews of this system.In contrast to traditional porphyry copper systems in a subduction setting,recent studies and exploration suggest that the Jiama deposit includes porphyry-type Mo-Cu,skarn-type Cu polymetallic,vein-type Au and manto orebodies.This paper reviews the latest studies on the geology,chronology,petrogenesis,fluid inclusions,and isotopic geochemistry(hydrogen,oxygen,sulfur,and lead)of the Jiama deposit.Accordingly,a multi-center complex mineralization model was constructed,indicating that multi-phase intrusions from the same magma reservoir can form multiple hydrothermal centers.These centers are mutually independent and form various orebodies or are superimposed on each other and form thick,high-grade orebodies.Finally,a new comprehensive exploration model was established for the Jiama porphyry copper system.Both models established in this study help to refine the theories on continental-collision metallogeny and porphyry copper systems.

Depositional process of hyperpycnal flow deposits:A case study on Lower Cretaceous Sangyuan outcrop in the Luanping Basin,Northeast China

Sedimentary process research is of great significance for understanding the distribution and characteristics of sediments.Through the detailed observation and measurement of the Sangyuan outcrop in Luanping Basin,this paper studies the depositional process of the hyperpycnal flow deposits,and divides their depositional process into three phases,namely,acceleration,erosion and deceleration.In the acceleration phase,hyperpycnal flow begins to enter the basin nearby,and then speeds up gradually.Deposits developed in the acceleration phase are reverse.In addition,the original deposits become unstable and are taken away by hyperpycnal flows under the eroding force.As a result,there are a lot of mixture of red mud pebbles outside the basin and gray mud pebbles within the basin.In the erosion phase,the reverse deposits are eroded and become thinner or even disappear.Therefore,no reverse grading characteristic is found in the proximal major channel that is closer to the source,but it is still preserved in the middle branch channel that is far from the source.After entering the deceleration phase,normally grading deposits appear and cover previous deposits.The final deposits in the basin are special.Some are reverse,and others are normal.They are superimposed with each other under the action of hyperpycnal flow.The analysis of the Sangyuan outcrop demonstrates the sedimentary process and distribution of hyperpycnites,and reasonably explain the sedimentary characteristics of hyperpycnites.It is helpful to the prediction of oil and gas exploration targets in gravity flow deposits.

Isotope Geochemistry of the Dongchuan Copper Deposit, Yunnan, SW China: Stratigraphic Chronology and Application of Lead Isotopes in Geochemical Exploration

In this paper the Pb-Pb isochron method was used to determine the isotopic ages of the Luoxue Formation dolomites (1716±56 Ma), the Heishan Formation carbonaceous slates (1607±128 Ma) of the middle sub-group of the Kunyang Group and the Dayingpan Formation carbonaceous slates (1258±70Ma) of the upper sub-group of the Kunyang Group. The age of the middle sub-group of the Kunyang Group is about 1800-1600 Ma, belonging to the Late Paleo-Proterozoic, and that of the Dayingpan Formation in the upper sub-group of the Kunyang Group is about 1200-1300 Ma, belonging to the Middle Proterozoic. In addition, the Pb isotope chemical exploration techniques were used to study systematically the Pb isotopic compositions of rocks and ores across the No.14 vein in the middle segment of the No.1 pit of the Tangdan copper deposit and the result showed that the Pb isotope V\-1 values are negatively correlated with the copper contents. It is the first trial to use the systematic section method to conduct Pb isotope chemical exploration.

SEDIMENTARY PATTERN OF PROTOTYPE BASIN IN THE DEPOSITION PERIOD OF LAIYANG FORMATION AND THE ADVANTAGEOUS AREAS FOR OIL AND GAS EXPLORATION OF JIAOLAI BASIN

Laiyang formation of Jiaolai Basin is the target stratum for oil and gas exploration. By measuring several field sections, the authors find that Laiyang formation reveals the whole processes from development to death of the lake basin and its sedimentary facies differ in different structural locations. Analyses about sedimentary facies and paleocurrent orientations in association with researches about the positive tectonic units such as Dayetou horseback and Chaigou horst indicate that Laiyang sag is a relatively independent sedimentary unit that shows great water depth typical of deep lake or semideep lake and was controlled by Wulongcun fault during the deposition period of Laiyang formation. Its sediments mainly originated from Jiaobei uplift area and Dayetou horseback. Gaomi-Zhucheng sag was a fast-filled basin controlled by Wurong fault and Yishu fault zone, being high in the northeast and low in the northwest and characterized by the development of pluvial facies and fluvial facies in most areas, and with the development of lake facies being limited to local low-lying regions. Selection of advantageous hydrocarbon reservoir areas for exploration purpose mainly relies on the sedimentation pattern of prototype basin and conservation conditions. The central-west area of Laiyang sag covered by overlying Laiyang formation is the most advantageous exploration area.

Application of Tectono Geochemical Study in Deep Concealed Ore Body Exploration--As the Huize Super-Large Lead-Zinc Deposit an exemple

1 Geological Background of Minerlization or Geologic Setting The northeast of Yunnan1 Pb-Zn-Ag-Ge polymetallic ore district is an important part of the southwestern margin of the Yangtze block Sichuan-Yunnan-Guizhou