A CombustionModel for Explosive Charge Affected by a Bottom Gap in the Launch Environment

Launch safety of explosive charges has become an urgent problem to be solved by all countries in the world aslaunch situation of ammunition becomes consistentlyworse.However, the existing numericalmodels have differentdefects. This paper formulates an efficient computational model of the combustion of an explosive charge affectedby a bottom gap in the launch environment in the context of the material point method. The current temperatureis computed accurately from the heat balance equation, and different physical states of the explosive charges areconsidered through various equations of state. Microcracks in the explosive charges are described with respectto the viscoelastic statistical crackmechanics (Visco–SCRAM) model. Themethod for calculating the temperatureat the bottomof the explosive charge with respect to the bottomgap is described. Based on this combustionmodel,the temperature history of a Composition B (COMB) explosive charge in the presence of a bottom gap is obtainedduring the launch process of a 155-mm artillery. The simulation results show that the bottom gap thickness shouldbe no greater than 0.039 cm to ensure the safety of the COM B explosive charge in the launch environment. Thisconclusion is consistent with previous results and verifies the correctness of the proposed model. Ultimately, thispaper derives amathematical expression for themaximumtemperature of the COMB explosive chargewith respectto the bottomgap thickness (over the range of 0.00–0.039 cm), and establishes a quantitative evaluationmethod forthe launch safety of explosive charges.The research results provide some guidance for the assessment and detectionof explosive charge safety in complex launch environments.

Numerical and Experimental Investigation into Plane Charge Explosion Technique

Plane charge explosion technique (PCET) is one of the major techniques frequently used in large-scale blast-resistant structure tests. An FEM model was established, which can simulate the process of air releasing from the blast cavity. The effects of the charge density, the interval of the charge strip, the distance of the charges from the structure, and the mass of backfill soil on the overpressures applied on the tested structures were analyzed by the FEM model. The quantitative relationships between the peak value and the duration of the overpressure and the above-mentioned affecting parameters were established. Agreement between numerical results and the test data was obtained.

APPLICATION OF HOT-PRESS SINTERING TECHNIQUE TO EXPLOSIVE CHARGE LINER OF PETROLEUM PERFORATION BULLET

A new method for manufacturing explosive charge liner of petroleum perforation bullet, using hot press sintering technique, has been introduced in the paper. The sintering process of making explosive charge liner has been investigated. The mechanical test and SEM analysis indicate that the property of the liner produced by the process is satisfied.

Characteristics and mechanisms of strain waves generated in rock by cylindrical explosive charges

A superposing principle, by suitably adding the strain waves from a number of concentrated explosive charges to approximate the waves generated by a cylindrical charge based on the strain wave of a point or small spherical explosive charge generated in rock, is used to further study the triggering time of strain gauges installed in radial direction at same distances but different positions surrounding a cylindrical explosive charge in rock. The duration of the first compression phase and peak value of strain wave, and furthermore, their differences are analyzed and some explanations are given. Besides that, the gauge orientation in which the maximum peak value occurs is also discussed. At last, the effect of velocity of detonation(V.O.D.) of a cylindrical explosive charge on the strain waves generated in the surrounding rock is taken as key research and the pattern of peak amplitude of a strain wave varies with the V.O.D. is likely to have been found.

Ordered Solidification Technique Under Low Pressures in the Loading of Molten Explosives

In order to improve the quality of loading and make the ammuni- tion safe in use,a new loading technique of ordered solidification has been studied.The study shows that the adoption of this new technique makes the charge more compact and brings about a satisfactory supplement of liquid ex- plosives,thus increasing the charge density,which is most advantageous to the crimination of pores,cavities,gaps at the bottom and in loose struc- tures.The physical mechanical properties of the charge are hence greatly im- proved,and the sensitivity of the charge to environmental stimulations is much lowered.

Field experiment for blasting crater

A series of single hole blasting crater experiments and a variable distance multi-hole simultaneous blasting experiment was carried in the Yunfu Troilite Mine,according to the Livingston blasting crater theory.We introduce in detail,our methodology of data collection and processing from our experiments.Based on the burying depth of the explosives,the blasting crater volume was fitted by the method of least squares and the characteristic curve of the blasting crater was obtained using the MATLAB soft- ware.From this third degree polynomial,we have derived the optimal burying depth,the critical burying depth and the optimal explosive specific charge of the blasting crater.

Effect of the Al/O ratio on the Al reaction of aluminized RDX-based explosives

Aluminum（Al） powders are used in composite explosives as a typical reducing agent for improving explosion performance. To understand energy release of aluminum in aluminized RDX-based explosives, a series of thermal measurements and underwater explosion（UNDEX） experiments were conducted. Lithium fluoride（LiF） was added in RDX-based explosives, as a replacement of aluminum, and used in constant temperature calorimeter experiments and UNDEXs. The influence of aluminum powder on explosion heat（Qv） was measured. A rich supply of data about aluminum energy release rate was gained. There are other oxides（CO2, CO, and H2O） in detonation products besides alumina when the content of RDX is maintained at the same levels. Aluminum cannot fully combine with oxygen in the detonation products. To study the relationship between the explosive formulation and energy release, pressure and impulse signals in underwater experiments were recorded and analyzed after charges were initiated underwater. The shock wave energy（Esk）, bubble energy（Eb）, and total energy（Et） monotony increase with the Al/O ratio, while the growth rates of the shock wave energy,bubble energy, and total energy become slow.

Detonation Propagation Characteristics of Superposition Explosive Materials

In order to investigate detonation propagation characteristics of different charge patterns,the detonation velocities of superposition strip shaped charges made up of a detonating cord and explosives were measured by a detonation velocity measuring instrument under conditions of different ignition.The experimental results and theoretical analysis show that the maximum detonation propagation velocity depends on the explosive materials with the maximum velocity among all the explosive materials.Using detonating cord in a superposition charge can shorten detonation propagation time and improve the efficiency of explosive energy.The measurement method of detonation propagation velocity and experimental results are presented and investigated.

Using the shaping filter for removing the effcets of the bubble pulses of explosive charge

Using the shaping filter to remove the effects of the bubble pulses of explosive charge, we obtained the impulse response function of the sea bottom. The result is quite satisfactory.