To improve the damage efficiency of compact terminal sensitive projectile with EFP warhead,it is vital to understand how the embedded structure(ES)affects the EFP forming performance.In this paper,the corresponding nu...To improve the damage efficiency of compact terminal sensitive projectile with EFP warhead,it is vital to understand how the embedded structure(ES)affects the EFP forming performance.In this paper,the corresponding numerical investigation is focused on,in which the fluid-structure interaction(FSI)method and the experimental verification are used.Based on the obtained quantitative relations between the forming performance and a(the ratio of height to maximum radius of ES),an optimal design is further provided.The results indicate that:when the embedded structural length and width range 0.1e0.3D and 0.1e0.2D(D:diameter of EFP warhead)at a fixed volume,respectively,EFP forming velocity nearly keeps as a constant,1760 m/s;the height of ES has a dramatical effect on the propagating range of detonation wave,resulting in significant influence on the aerodynamic shape and length-to-diameter ratio of EFP;under the given constraints,the EFP length-diameter ratio can reach the optimal value2.76,when the height of ES is 0.22D.展开更多
To quickly break through a reinforced concrete wall and meet the damage range requirements of rescuers entering the building,the combined damage characteristics of the reinforced concrete wall caused by EFP penetratio...To quickly break through a reinforced concrete wall and meet the damage range requirements of rescuers entering the building,the combined damage characteristics of the reinforced concrete wall caused by EFP penetration and explosion shock wave were studied.Based on LS-DYNA finite element software and RHT model with modified parameters,a 3D large-scale numerical model was established for simulation analysis,and the rationality of the material model parameters and numerical simulation algorithm were verified.On this basis,the combined damage effect of EFP penetration and explosion shock wave on reinforced concrete wall was studied,the effect of steel bars on the penetration of EFP was highlighted,and the effect of impact positions on the damage of the reinforced concrete wall was also examined.The results reveal that the designed shaped charge can form a crater with a large diameter and high depth on the reinforced concrete wall.The average crater diameter is greater than 67 cm(5.58 times of charge diameter),and crater depth is greater than 22 cm(1.83 times of charge diameter).The failure of the reinforced concrete wall is mainly caused by EFP penetration.When only EFP penetration is considered,the average diameter and depth of the crater are 54.0 cm(4.50 times of charge diameter)and 23.7 cm(1.98 times of charge diameter),respectively.The effect of explosion shock wave on crater depth is not significant,resulting in a slight increase in crater depth.The average crater depth is 24.5 cm(2.04 times of charge diameter)when the explosion shock wave is considered.The effect of explosion shock wave on the crater diameter is obvious,which can aggravate the damage range of the crater,and the effect gradually decreases with the increase of standoff distance.Compared with the results for a plain concrete wall,the crater diameter and crater depth of the reinforced concrete wall are reduced by 5.94%and 9.96%,respectively.Compared to the case in which the steel bar is not hit,when the EFP hit one steel bar and the intersection of two steel bars,the crater diameter decreases by 1.36%and 5.45%respectively,the crater depth decreases by 4.92%and 14.02%respectively.The EFP will be split by steel bar during the penetration process,resulting in an irregular trajectory.展开更多
采用LS-DYNA对在药型罩上粘附隔板结构形成带尾翼型爆炸成型弹丸(explosively formed projectile,EFP)进行三维数值模拟,从药型罩微元压跨速度和压力的角度初步探讨了形成尾翼型EFP的机理,对同一直径的大锥角型、球缺型和弧锥结合型药...采用LS-DYNA对在药型罩上粘附隔板结构形成带尾翼型爆炸成型弹丸(explosively formed projectile,EFP)进行三维数值模拟,从药型罩微元压跨速度和压力的角度初步探讨了形成尾翼型EFP的机理,对同一直径的大锥角型、球缺型和弧锥结合型药型罩形成的尾翼型EFP进行了对比分析,三种结构药型罩均能形成较为明显的尾翼,其中大锥角型药型罩得到的EFP速度最高。数值计算结果表明,EFP尾翼数与药型罩上所粘贴的隔板数一致,三种不同结构药型罩上粘贴四个隔板,得到的尾翼数均为四个。通过实验,对贴隔板法形成尾翼EFP做了进一步验证,实验结果与数值模拟结果基本一致。展开更多
针对同一成型装药形成多模毁伤元问题,利用LS-DYNA动力有限元程序,采用流固耦合方法,对在药型罩前加装一刻槽圆环形成带尾翼爆炸成型弹丸(explosively formed projectile,EFP)的成型过程进行了数值模拟,结果表明,该装药结构能形成带有8...针对同一成型装药形成多模毁伤元问题,利用LS-DYNA动力有限元程序,采用流固耦合方法,对在药型罩前加装一刻槽圆环形成带尾翼爆炸成型弹丸(explosively formed projectile,EFP)的成型过程进行了数值模拟,结果表明,该装药结构能形成带有8个尾翼的EFP,带尾翼EFP的长径比是EFP长径比的2.75倍,其头部速度比EFP增加了15%,实现了带尾翼大长径比EFP和EFP两种模态的转换。展开更多
基金funded by the National Natural Science Foundation of China under No. 11102088Fundamental Research Funds for the Central Universities under No. 30915118821funded by the Specialized Research Fund for the Doctoral Program of Higher Education of China under No. 20133219110019
文摘To improve the damage efficiency of compact terminal sensitive projectile with EFP warhead,it is vital to understand how the embedded structure(ES)affects the EFP forming performance.In this paper,the corresponding numerical investigation is focused on,in which the fluid-structure interaction(FSI)method and the experimental verification are used.Based on the obtained quantitative relations between the forming performance and a(the ratio of height to maximum radius of ES),an optimal design is further provided.The results indicate that:when the embedded structural length and width range 0.1e0.3D and 0.1e0.2D(D:diameter of EFP warhead)at a fixed volume,respectively,EFP forming velocity nearly keeps as a constant,1760 m/s;the height of ES has a dramatical effect on the propagating range of detonation wave,resulting in significant influence on the aerodynamic shape and length-to-diameter ratio of EFP;under the given constraints,the EFP length-diameter ratio can reach the optimal value2.76,when the height of ES is 0.22D.
基金supported by the Scientific and Technological Innovation Project(Grant No.KYGYZB0019003)。
文摘To quickly break through a reinforced concrete wall and meet the damage range requirements of rescuers entering the building,the combined damage characteristics of the reinforced concrete wall caused by EFP penetration and explosion shock wave were studied.Based on LS-DYNA finite element software and RHT model with modified parameters,a 3D large-scale numerical model was established for simulation analysis,and the rationality of the material model parameters and numerical simulation algorithm were verified.On this basis,the combined damage effect of EFP penetration and explosion shock wave on reinforced concrete wall was studied,the effect of steel bars on the penetration of EFP was highlighted,and the effect of impact positions on the damage of the reinforced concrete wall was also examined.The results reveal that the designed shaped charge can form a crater with a large diameter and high depth on the reinforced concrete wall.The average crater diameter is greater than 67 cm(5.58 times of charge diameter),and crater depth is greater than 22 cm(1.83 times of charge diameter).The failure of the reinforced concrete wall is mainly caused by EFP penetration.When only EFP penetration is considered,the average diameter and depth of the crater are 54.0 cm(4.50 times of charge diameter)and 23.7 cm(1.98 times of charge diameter),respectively.The effect of explosion shock wave on crater depth is not significant,resulting in a slight increase in crater depth.The average crater depth is 24.5 cm(2.04 times of charge diameter)when the explosion shock wave is considered.The effect of explosion shock wave on the crater diameter is obvious,which can aggravate the damage range of the crater,and the effect gradually decreases with the increase of standoff distance.Compared with the results for a plain concrete wall,the crater diameter and crater depth of the reinforced concrete wall are reduced by 5.94%and 9.96%,respectively.Compared to the case in which the steel bar is not hit,when the EFP hit one steel bar and the intersection of two steel bars,the crater diameter decreases by 1.36%and 5.45%respectively,the crater depth decreases by 4.92%and 14.02%respectively.The EFP will be split by steel bar during the penetration process,resulting in an irregular trajectory.
文摘采用LS-DYNA对在药型罩上粘附隔板结构形成带尾翼型爆炸成型弹丸(explosively formed projectile,EFP)进行三维数值模拟,从药型罩微元压跨速度和压力的角度初步探讨了形成尾翼型EFP的机理,对同一直径的大锥角型、球缺型和弧锥结合型药型罩形成的尾翼型EFP进行了对比分析,三种结构药型罩均能形成较为明显的尾翼,其中大锥角型药型罩得到的EFP速度最高。数值计算结果表明,EFP尾翼数与药型罩上所粘贴的隔板数一致,三种不同结构药型罩上粘贴四个隔板,得到的尾翼数均为四个。通过实验,对贴隔板法形成尾翼EFP做了进一步验证,实验结果与数值模拟结果基本一致。
文摘针对同一成型装药形成多模毁伤元问题,利用LS-DYNA动力有限元程序,采用流固耦合方法,对在药型罩前加装一刻槽圆环形成带尾翼爆炸成型弹丸(explosively formed projectile,EFP)的成型过程进行了数值模拟,结果表明,该装药结构能形成带有8个尾翼的EFP,带尾翼EFP的长径比是EFP长径比的2.75倍,其头部速度比EFP增加了15%,实现了带尾翼大长径比EFP和EFP两种模态的转换。
