Nonsingular Fast Terminal Sliding Mode Control Based on Nonlinear Disturbance Observer for a Quadrotor

Given external disturbances and system uncertainties,a nonsingular fast terminal sliding mode control(NFTSMC)method integrated a nonlinear disturbance observer(NDO)is put forward for quadrotor aircraft.First,a NDO is proposed to estimate the actual values of uncertainties and disturbances.Second,the NFTSM controller based on the reaching law is designed for the attitude subsystem(inner loop),and the control strategy can ensure Euler angles’fast convergence and stability of the attitude subsystem.Moreover,the NFTSMC strategy combined with backstepping is proposed for the position subsystem(outer loop),which can ensure subsystem tracking performance.Finally,comparative simulations show the trajectory tracking performance of the proposed method is superior to that of the traditional sliding mode control(SMC)and the SM integral backstepping control under uncertainties and disturbances.

Adaptive Neural Observer-Based Nonsingular Super-Twisting Terminal Sliding-Mode Controller Design for a Class of Hovercraft Nonlinear Systems

Designing a controller to stabilize maneuvering hovercrafts is an important challenge in amphibious vehicles.Hovercrafts are implemented in several applications,such as military missions,transportation,and scientific tasks.Thus.to improve their performance,it is crucial to control the system and compensate uncertainties and disruptions.In this paper,both classic and intelligent approaches are combined to design an observer-based controller.The system is assumed to be both controllable and observable.An adaptive neural network observer with guaranteed stability is derived for the nonlinear dynamics of a hovercraft,which is controlled via a nonsingular super-twisting terminal sliding-mode method.The main merits of the proposed method are as follows:(1) the Lyapunov stability of the overall closed-loop system,(2) the convergence of the tracking and observer errors to zero,(3) the robustness against uncertainties and disturbances,and(4) the reduction of the chattering phenomena.The simulation results validate the excellent performance of the derived method.

The Non-Singular Fast Terminal Sliding Mode Control of Interior Permanent Magnet Synchronous Motor Based on Deep Flux Weakening Switching Point Tracking

This paper presents a novel non-singular fast terminal sliding mode control(NFTSMC)based on the deep flux weakening switching point tracking method in order to improve the control performance of permanent interior magnet synchronous motor(IPMSM)drive systems.The mathematical model of flux weakening(FW)control is established,and the deep flux weakening switching point is calculated accurately by analyzing the relationship between the torque curve and voltage decline curve.Next,a second-order NFTSMC is designed for the speed loop controller to ensure that the system converges to the equilibrium state in finite time.Then,an extended sliding mode disturbance observer(ESMDO)is designed to estimate the uncertainty of the system.Finally,compared with both the PI control and sliding mode control(SMC)by simulations and experiments with different working conditions,the method proposed has the merits of accelerating convergence,improving steady-state accuracy,and minimizing the current and torque pulsation.

Observer-Based Control for a Cable-Driven Aerial Manipulator under Lumped Disturbances

With the increasing demand for interactive aerial operations,the application of aerial manipulators is becoming more promising.However,there are a few critical problems on how to improve the energetic efficiency and pose control of the aerialmanipulator forpractical application.In this paper,a novel cable-drivenaerialmanipulatorused for remote water sampling is proposed and then its rigid-flexible coupling dynamics model is constructed which takes joint flexibility into account.To achieve high precision joint position tracking under lumped disturbances,a newly controller,which consists of three parts:linear extended state observer,adaptive super-twisting strategy,and fractional-order nonsingular terminal sliding mode control,is proposed.The linear extended state observer is adopted to approximate unmeasured states and unknown lumped disturbances and achieve model-free control structure.The adaptive super-twisting strategy and fractional-order nonsingular terminal sliding mode control are combined together to achieve good control performance and counteract chattering problem.The Lyapunovmethod is utilized to prove the overall stability and convergence of the system.Lastly,various visualization simulations and ground experiments are conducted,verifying the effectiveness of our strategy,and all outcomes demonstrate its superiorities over the existing control strategies.

Fuzzy Sliding Mode Active Disturbance Rejection Control of an Autonomous Underwater Vehicle-Manipulator System

In this paper, a fuzzy sliding mode active disturbance rejection control(FSMADRC) scheme is proposed for an autonomous underwater vehicle-manipulator system(AUVMS) with a two-link and three-joint manipulator. First, the AUVMS is separated into nine subsystems, and the combined effects of dynamic uncertainties, hydrodynamic force, unknown disturbances, and nonlinear coupling terms on each subsystem are lumped into a single total disturbance. Next, a linear extended state observer(LESO) is presented to estimate the total disturbance. Then, a sliding mode active disturbance rejection control(SMADRC) scheme is proposed to enhance the robustness of the control system. The stability of the SMADRC and the estimation errors of the LESO are analyzed. Because it is difficult to simultaneously adjust several parameters for a LESO-based SMADRC scheme, a fuzzy logic control(FLC) scheme is used to formulate the FSMADRC to determine the appropriate parameters adaptively for practical applications. Finally, two AUVMS tasks are illustrated to test the trajectory tracking performance of the closed-loop system and its ability to reject and attenuate the total disturbance. The simulation results show that the proposed FSMADRC scheme achieves better performance and consume less energy than conventional PID and FLC techniques.

Non-Negative Adaptive Mechanism-Based Sliding Mode Control for Parallel Manipulators with Uncertainties

In this paper,a non-negative adaptive mechanism based on an adaptive nonsingular fast terminal sliding mode control strategy is proposed to have finite time and high-speed trajectory tracking for parallel manipulators with the existence of unknown bounded complex uncertainties and external disturbances.The proposed approach is a hybrid scheme of the online non-negative adaptive mechanism,tracking differentiator,and nonsingular fast terminal sliding mode control(NFTSMC).Based on the online non-negative adaptive mechanism,the proposed control can remove the assumption that the uncertainties and disturbances must be bounded for the NFTSMC controllers.The proposed controller has several advantages such as simple structure,easy implementation,rapid response,chattering-free,high precision,robustness,singularity avoidance,and finite-time convergence.Since all control parameters are online updated via tracking differentiator and non-negative adaptive law,the tracking control performance at high-speed motions can be better in real-time requirement and disturbance rejection ability.Finally,simulation results validate the effectiveness of the proposed method.

Novel Logarithmic Non-Singular Terminal Sliding Mode and ItsApplication in Attitude Control of QTR

In this study we mainly focus on the attitude control problem of a quad tilt rotor aircraft with respect to unknown external disturbance. We propose a class of control methods based on a novel logarithmic fast non singular terminal sliding surface a new fast reaching law and extended state disturbance observer. A logarithmic non singular terminal sliding surface is used owing to its convergence in finite time and significant robustness. A fast reaching law with two order characteristics of the sliding mode is designed. This reaching law can be used reduce the convergence time of traditional reaching law. In addition the extended state disturbance observer is utilized for online estimation and to compensate for system disturbance. The simulation experiment results show that the control strategy proposed in this paper outperforms the traditional non singular fast sliding mode control.

Robust Nonsingular Fixed Time Terminal Sliding Mode Control for Atmospheric Pollution Detection Lidar Scanning Mechanism

A robust nonsingular fixed time terminal sliding mode control scheme with a time delay disturbance observer is proposed for atmospheric pollution detection lidar scanning mechanism(APDL-SM)system.Distinguished from the conventional terminal sliding mode control methods,the authors design a novel fixed-time terminal sliding surface,the convergence time of sliding mode phase of which has a constant upper bound that is designable by adjusting only one parameter.Moreover,in order to overcome the problem of unknown upper bound of lumped uncertainty including model uncertainty,friction effect and external disturbances from the port environment,the authors propose a time delay disturbance observer to provide an estimation for the system lumped uncertainty.By using the Lyapunov synthesis,the explicit analysis of the convergence time upper bound are performed.Finally,simulation studies are conducted on the APDL-SM system to show the fast convergence rate and strong robustness of the proposed control scheme.

基于扰动观测器和改进自适应二阶快速终端滑模的PMLSM伺服系统控制

针对永磁直线同步电动机(PMLSM)在运行时易受到摩擦力、负载扰动及环境变化等不确定影响,设计一种基于扰动观测器和自适应二阶快速终端滑模控制方法。首先,该方法在高阶滑模的基础上结合了快速终端滑模控制,有效加快了系统响应速度。其次,在二阶滑模面的基础上引入条件积分项,该项仅作用于边界层内部,能够有效避免滑模到达阶段由于积分饱和现象导致的超调量过大及响应时间过慢的问题。此外,设计自适应切换控制律,使切换增益在合理的区间内,并根据系统状态进行实时更新,从而削弱抖振现象。最后,为进一步提升系统的鲁棒性,采用扰动观测器对PMLSM系统的集总不确定性进行补偿。经实验验证,该控制方法具有良好的位置跟踪精度和强鲁棒性,且对系统抖振现象有明显削弱作用。

基于ESMDO的级联双模型永磁同步电机鲁棒控制

考虑永磁同步电机调速控制系统中传统电流环数学模型的耦合非线性,结合无模型控制的优势,提出了一种基于扩展滑模观测器(extended sliding mode disturbance observer,ESMDO)的级联双模型永磁同步电机鲁棒控制方法,有效解决了传统PI控制器的鲁棒性差、动态响应慢的问题。首先,在转速环利用传统永磁同步电机数学模型设计了引入自校正开关增益的离散滑模转速控制器,通过离散的ESMDO观测综合扰动项并进行补偿。然后,在考虑电机参数的不确定性和外部扰动的情况下,建立了电流环超局部模型,设计了基于离散的ESMDO的无模型无差拍电流预测控制器。最后,以PI控制为对比方法进行仿真分析,仿真结果表明了所提方法的可行性与有效性。

PMSM无模型超螺旋快速积分终端滑模控制

针对永磁同步电机运行过程中因模型不确定、参数摄动和外部扰动等因素的影响,从而导致驱动系统性能下降的问题,提出一种新型控制策略。首先,为减少对系统数学模型的依赖,构建了一个新的超局部模型,用于描述永磁同步电机的转速环。其次,基于转速环的新型超局部模型,结合一种新型积分终端滑模面和改进超螺旋控制律来设计新型无模型超螺旋快速积分终端滑模控制器,实现了对转速的精确控制。再次,采用非奇异快速终端滑模面和双幂次趋近律设计改进扩展非奇异终端滑模扰动观测器,通过精确观测和前馈补偿未知扰动,有效地抑制参数摄动和外部扰动,增强了系统鲁棒性,提高系统的动态性能和稳态性能。最后,通过与传统控制方法的仿真和实验对比,证实所提算法转速抗超调能力提升为0.412 5%,转矩快速响应能力提升0.013 s。结果表明当存在未知扰动时,所提方法具有较强的鲁棒性和良好的抗干扰性。

无人机舵面故障高阶滑模重构观测器设计及主动容错控制

针对无人机舵面损伤故障容错问题,提出了基于二阶非奇异终端滑模重构观测器及主动容错设计方法。在分析舵面正常偏转运动学和动力学特性基础上,构建了无人机典型舵面故障非线性特性模型。提出无人机舵面故障的高阶滑模重构滑模观测器设计方案;引入线性变换降维简化观测器设计程式;将终端滑模和非奇异终端滑模结合起来,实现滑模运动有限时间快速收敛;综合自适应律、线性矩阵不等式设计观测器系数矩阵,确保状态估计偏差有界稳定。提出集状态与故障重构于一体的主动容错控制方案,并通过仿真算例检验所提方案的有效性。

一种新型永磁同步电机高阶滑模控制算法

针对永磁同步电机控制系统易因外部扰动等不确定性影响而导致控制性能下降的问题,提出了一种基于改进自适应非奇异终端滑模控制器和滑模扰动观测器补偿技术的复合控制算法。选择新型自适应指数趋近律设计非奇异终端滑模转速环控制器,新型趋近律可以在保证减少抖振的同时保证控制系统能够快速收敛,可动态适应被控系统的变化;利用扩展滑模扰动观测器实时估计系统中不确定性参数,并对控制器进行前馈补偿,且通过Lyapunov函数证明了其稳定性。仿真和试验结果表明,与PI控制、传统滑模控制方法相比,所提方法有效改善了抖振问题,提高了控制系统对电机的控制精度,提升了系统的鲁棒性和抗干扰性能。

基于扰动观测器的主动悬架切换控制算法研究

悬架控制需要实现乘坐舒适性和操纵稳定性之间的良好折中,此外还需要考虑系统的不确定性,是一项复杂的任务。本文以兼顾悬架的动力学性能指标、算法鲁棒性与成本因素为出发点,提出了一种基于扰动观测器的次优-非奇异终端滑模切换控制算法(DOB-SNTSM)。首先,以簧载质量加速度信息为输入,通过卡尔曼滤波器设计,实现了悬架动挠度和簧载质量速度的有效估计。然后,针对悬架系统中的不确定项估计,设计了一种扰动观测器,并将扰动估计值作为前馈补偿。接下来,以滑模面函数为依据,提出了一种次优-非奇异终端滑模切换控制算法,并与扰动观测器的前馈补偿相结合,共同构成一种新的主动悬架控制策略。最后,分别进行了凸包路面和平稳随机路面下的仿真和台架试验验证,结果表明,扰动观测器的引入能显著提升悬架的乘坐舒适性指标,相比经典的天棚控制、理想状态LQR方法、不带有扰动观测器的SNTSM算法,新算法不仅很好地实现各项悬架性能指标的均衡,而且能够仅利用簧载质量加速度信息就可以达到接近理想状态LQR的控制效果,同时,控制器切换方案可以显著提升算法鲁棒性。

非最小相位的单电感双输出Buck-Boost变换器的复合控制方法

单电感双输出Buck-Boost (SIDO Buck-Boost)变换器在电感电流连续模式(CCM)下工作存在交叉影响以及非最小相位特性的问题.为了解决上述问题,提出基于储能函数的扩张状态观测器(ESO)的改进非奇异快速终端滑模(NFTSM)和自抗扰控制(ADRC)相结合的控制策略.设计主路控制器,对系统的传递函数进行拟合得到ADRC范式,利用该范式对主路进行解耦控制.设计支路控制器,采用改进型ESO对储能函数进行观测,并将观测值反馈补偿到非奇异快速终端滑模控制律中,达到支路解耦的效果.为了抑制滑模控制的抖振问题,对趋近律进行改进.利用Lyapunov理论证明系统稳定性.基于硬件在环(HIL)实验平台进行实验验证.结果表明,所提控制策略与PI控制策略以及基于ESO的滑模控制策略相比,在超调量和响应时间上具有较好的效果.

考虑复杂扰动的轻型商用车路径跟踪混合控制方法

外界扰动、模型不确定性和参数摄动等复杂扰动直接影响智能车辆路径跟踪控制的精度和行驶安全性。商用车的载重特性使其在行驶过程中受到的复杂扰动更为明显,为提升自动驾驶商用车路径跟踪精度和平顺性,提出一种路径跟踪混合控制方法。首先,建立鲁棒性强的基于扩张观测器的滑模控制器和变化平稳的增量式LQR控制器,其中增量式LQR的参数使用粒子群算法整定。然后,使用模糊控制器将两者相结合,根据车速和横向误差调整权重系数,在提升系统鲁棒性的同时削弱抖振。最后,进行了仿真分析和实车试验。试验数据表明,SMC+LQR具备较好的控制效果,能应对外界的复杂扰动。

基于干扰观测器与终端滑模的车辆纵向控制

为了消除未知干扰和不确定性对车辆纵向控制的影响,设计了基于干扰观测器和终端滑模控制的分层式车辆纵向控制系统.利用干扰观测器对系统干扰进行实时观测,实现对系统的反馈补偿,降低滑模控制的切换增益,从而抑制滑模控制的抖振.利用Lyapunov函数证明了控制系统的稳定性,并通过Carsim/Simulink进行了联合仿真试验.结果表明:在两种仿真工况条件下,控制器对参考速度跟踪效果良好,速度误差最大仅为0.22 m/s,干扰观测器对系统干扰能够准确快速估计,估计误差仅为0.003 14,切换逻辑执行器发挥良好;与传统滑模控制相比,所设计的控制器稳定性更好,抑制了滑模控制的抖振,实现了对车辆纵向速度的稳定跟踪.

泵控系统的积分终端滑模位置控制

为提高执行器的响应速度、鲁棒性和控制精度,提出了一种新型控制技术,将扩张状态观测器与反步积分终端滑模预设性能控制器相结合。首先,将非线性干扰观测器与扩张状态观测器融合,实现对状态量、外部干扰和匹配干扰的观测。然后,在控制器中引入积分终端滑模和规定性能约束,以加快执行器在位移误差远离平衡点时的跟踪误差收敛速度,并确保瞬态和稳态位置响应在要求的有界范围内。最后,基于李雅普诺夫方法对控制器进行稳定性分析。结果表明:在跟踪具有外负载干扰的复合轨迹情况下,设计的控制器能保证瞬态性能和规定的跟踪精度,与反步滑模控制器和PID相比,所提出的控制器具有更佳的控制性能。

基于扩张状态观测器的伺服加载模糊滑模控制

针对电动伺服加载测试台存在的间隙、摩擦等非线性控制问题,以滑模变结构控制(SMC)为主体进行了加载控制器设计。分析伺服加载测试台整体结构,提出一种基于扩张状态扰动观测器(ESO)的模糊滑模控制(FSMC)策略。该策略在使用ESO针对伺服加载系统的外部干扰进行观测的基础上,设计了模糊控制对滑动模态面和滑模趋近律进行自适应调节,提高了系统的动态实时跟随能力和干扰补偿能力,并减小SMC控制器稳定时的抖振现象。仿真结果表明:所设计的基于扩张状态观测器的模糊滑模控制器(FSMC-ESO)对比传统SMC及PID控制具有更好的快速响应性和鲁棒性。

基于滑模自抗扰的储能变流器控制策略

为了提高储能变流器(PCS)的动态性能,设计基于降阶级联扩张状态观测器(ESO)和互补滑模控制(CSMC)的改进自抗扰控制(ADRC)策略,将改进ADRC策略应用于PCS的双向DC/AC变流器电压外环.改进ESO为降阶级联ESO以提高状态变量和系统总扰动的估计速度,增加扰动估计能力;更改PD控制为CSMC以设计状态误差反馈律,提升PCS的系统鲁棒性;设计改进指数趋近律以抑制抖振现象.为了证明改进ADRC策略相较于PI控制和传统ADRC的优越性,建立仿真模型并搭建相关实验平台.仿真与实验结果表明,改进ADRC策略减小了PCS暂态时直流母线电压波动,提高了PCS交流侧功率响应速度,改善了交流侧的输出电能质量.