The spatio-temporal characteristics of acoustic emission (AE) during the deformation of rock samples with compressional and extensional en-echelon faults have been studied. The results show that the pre-existing struc...The spatio-temporal characteristics of acoustic emission (AE) during the deformation of rock samples with compressional and extensional en-echelon faults have been studied. The results show that the pre-existing structure can significantly influence the patterns of AE spatial distribution. With increasing of differential stress, AE events firstly cluster around the two ends of pre-existing faults inside the jog and then along the line joining the two ends. The biggish AE events often occur around one end repeatedly. The image of AE clusters indicates the direction and the area of the fracture propagation. The direction of the macroscopic fracture in extensional and compressional jogs is perpendicular and parallel to the direction of axial stress, respectively. The weakening process before the fracturing of jog area is remarkable, and one of the typical precursors for the instability is that the cumulative frequency of AE events increases exponentially. After the fracturing of the jog the frequency and releasing strain energy of AE events decrease gradually. During the friction period, there is no precursory increasing of AE activity before the big stick-slip events. The change of b value in jog shows a typical change of decreasing tendentiously returning quickly before the instability. The decrease of b value occurs in the process of stress increasing and sometime goes down to the weakening stage, and the quick increase b values appears in a short time just before the instability. The comparative analysis shows that the difference in b value due to the different structures is larger than b value variation caused by increase of the differential stress. For the same sample, the temporal sequence of AE is strongly affected by the mechanical state, and the high loading velocity corresponds to the high release rate of strain energy and low b value. Due to its lower failure strength, the broken area is sensitive to small changes in differential stress. Therefore, it offers a potential explanation for the phenomena of precursory window or sensitive point and separation of seismic source and precursors.展开更多
Three series of sandbox modeling experiments were performed to study the fault-increment pattern in extensional basins. Experimental results showed that the tectonic action mode of boundaries and the shape of major bo...Three series of sandbox modeling experiments were performed to study the fault-increment pattern in extensional basins. Experimental results showed that the tectonic action mode of boundaries and the shape of major boundary faults control the formation and evolution of faults in extensional basins. In the process of extensional deformation, the increase in the number and length of faults was episodic, and every 'episode' experienced three periods, strain-accumulation period, quick fault-increment period and strain-adjustment period. The more complex the shape of the boundary fault, the higher the strain increment each 'episode' experienced. Different extensional modes resulted in different fault-increment patterns. The horizontal detachment extensional mode has the 'linear' style of fault-increment pattern, while the extensional mode controlled by a listric fault has the 'stepwise' style of fault-increment pattern, and the extensional mode controlled by a ramp-flat boundary fault has the 'stepwise-linear' style of fault-increment pattern. These fault-increment patterns given above could provide a theoretical method of fault interpretation and fracture prediction in extensional basins.展开更多
Extensional fault-bend folds, also called rollovers, are one of the most common structures in extensional settings. Numerous studies have shown that oblique simple shear is the most appropriate mechanism for quantitat...Extensional fault-bend folds, also called rollovers, are one of the most common structures in extensional settings. Numerous studies have shown that oblique simple shear is the most appropriate mechanism for quantitative modeling of geometric relations between normal faults and the strata in their hanging walls. However, the oblique simple shear has a rather serious issue derived from the shear direction, particularly above convex bends. We use geometric and experimental methods to study the deformation of extensional fault-bend folds on convex bends. The results indicate that whether the fault bends are concave or convex, the shear direction of the hanging wall dips toward the main fault. On this basis, we improve the previous geometric model by changing the shear direction above the convex bends. To illustrate basin history, our model highlights the importance of the outer limit of folding instead of the growth axial. Moreover, we propose a new expression for the expansion index that is applicable to the condition of no deposition on the footwall. This model is validated by modeling a natural structure of the East China Sea Basin.展开更多
To evaluate the lateral sealing mechanism of extensional fault based on the pressure difference between fault and reservoir, an integral mathematical-geological model of diagenetic time on diagenetic pressure consider...To evaluate the lateral sealing mechanism of extensional fault based on the pressure difference between fault and reservoir, an integral mathematical-geological model of diagenetic time on diagenetic pressure considering the influence of diagenetic time on the diagenetic pressure and diagenetic degree of fault rock has been established to quantitatively calculate the lateral sealing ability of extensional fault. By calculating the time integral of the vertical stress and horizontal in-situ stress on the fault rock and surrounding rock, the burial depth of the surrounding rock with the same clay content and diagenesis degree as the target fault rock was worked out. In combination with the statistical correlation of clay content, burial depth and displacement pressure of rock in the study area, the displacement pressure of target fault rock was calculated quantitatively. The calculated displacement pressure was compared with that of the target reservoir to quantitatively evaluate lateral sealing state and ability of the extensional fault. The method presented in this work was used to evaluate the sealing of F_(1), F_(2) and F_(3) faults in No.1 structure of Nanpu Sag, and the results were compared with those from fault-reservoir displacement pressure differential methods without considering the diagenetic time and simple considering the diagenetic time. It is found that the results calculated by the integral mathematical-geological model are the closest to the actual underground situation, the errors between the hydrocarbon column height predicted by this method and the actual column height were 0–8 m only, proving that this model is more feasible and credible.展开更多
Extensional basins include mainly grabens and half grabens displaced along alower detachment. Based on area balance theory, there is a linear relationship between a height ofregional and the lower detachment h on the ...Extensional basins include mainly grabens and half grabens displaced along alower detachment. Based on area balance theory, there is a linear relationship between a height ofregional and the lower detachment h on the outside of the basin and 'lost area S' from the regionalin the basin. The pre-growth beds above lower detachment are of the same extensional displacement sothat an 'S-h diagram' can be used to determine the depth to lower detachment and to calculate thetotal extensional displacement of the beds above the lower detachment. The extensional displacementis dominated by the heave of various scale normal faults. The displacement of obvious faults can beimmediately figured out from the measured bed-length. The requisite extension calculated by areabalance is the layer-parallel strain, which could be accommodated by displacement on sub-resolutionfaults. Accordingly, the layer-parallel strain can help us predict the magnitude and distribution ofsub-resolution faults on the basis of analysis of the structural style and rheological behavior.展开更多
The Erlian fault basin group, a typical Basin and Range type fault basin group, was formed during Late Jurassic to Early Cretaceous, in which there are rich coal, oil and gas resources. In the present paper the abund...The Erlian fault basin group, a typical Basin and Range type fault basin group, was formed during Late Jurassic to Early Cretaceous, in which there are rich coal, oil and gas resources. In the present paper the abundant geological and petroleum information accumulated in process of industry oil and gas exploration and development of the Erlian basin group is comprehensively analyzed, the structures related to formation of basin are systematically studied, and the complete extensional tectonic system of this basin under conditions of wide rift setting and low extensional ratio is revealed by contrasting study with Basin and Range Province of the western America. Based on the above studies and achievements of the former workers, the deep background of the basin development is treated.展开更多
Dextral-slip in the Nyainqentanglha region of Tibet resulted in oblique underthrusting and granite generation in the Early to Middle Miocene, but by the end of the epoch uplift and extensional faulting dominated. The ...Dextral-slip in the Nyainqentanglha region of Tibet resulted in oblique underthrusting and granite generation in the Early to Middle Miocene, but by the end of the epoch uplift and extensional faulting dominated. The east-west dextral-slip Gangdise fault system merges eastward into the northeast-trending, southeast-dipping Nyainqentanglha thrust system that swings eastward farther north into the dextral-slip North Damxung shear zone and Jiali faults. These faults were took shape by the Early Miocene, and the large Nyainqentanglha granitic batholith formed along the thrust system in 18.3-11.0 Ma as the western block drove under the eastern one. The dextral-slip movement ended at -11 Ma and the batholith rose, as marked by gravitational shearing at 8.6-8.3 Ma, and a new fault system developed. Northwest-trending dextral-slip faults formed to the northwest of the raisen batholith, whereas the northeast-trending South Damxung thrust faults with some sinistral-slip formed to the southeast. The latter are replaced farther to the east by the west-northwest-trending Lhtinzhub thrust faults with dextral-slip. This relatively local uplift that left adjacent Eocene and Miocene deposits preserved was followed by a regional uplift and the initiation of a system of generally north-south grabens in the Late Miocene at -6.5 Ma. The regional uplift of the southern Tibetan Plateau thus appears to have occurred between 8.3 Ma and 6.5 Ma. The Gulu, DamxungYangbajain and Angan graben systems that pass east of the Nyainqentanglha Mountains are locally controlled by the earlier northeast-trending faults. These grabens dominate the subsequent tectonic movement and are still very active as northwest-trending dextral-slip faults northwest of the mountains. The Miocene is a time of great tectonic change that ushered in the modern tectonic regime.展开更多
The fact that several half-grabens and normal faults developed in the Lower--Middle Cambrian of Tazhong (central Tarim Basin) and Bachu areas in Tarim Basin, northwest China, indicates that Tarim Basin was under ext...The fact that several half-grabens and normal faults developed in the Lower--Middle Cambrian of Tazhong (central Tarim Basin) and Bachu areas in Tarim Basin, northwest China, indicates that Tarim Basin was under extensional tectonic setting at this time. The half-grabens occur within a linear zone and the normal faults are arranged in en echelon patterns with gradually increasing displacement eastward. Extensional tectonics resulted in the formation of a passive continental margin in the southwest and a cratonic margin depression in the east, and most importantly, influenced the development of a three- pronged rift in the northeast margin of the Tarim Basin. The fault system controlled the development of platform -- slope -- bathyal facies sedimentation of mainly limestone-dolomite-gypsum rock-saline rock-red beds in the half-grabens. The NW-SE trending half-grabens reflect the distribution of buried basement faults.展开更多
This paper analyzes various earthquake fault types, mechanism solutions, stress field as well as other geophysical data to study the crust movement in the Tibetan plateau and its tectonic implications. The results sho...This paper analyzes various earthquake fault types, mechanism solutions, stress field as well as other geophysical data to study the crust movement in the Tibetan plateau and its tectonic implications. The results show that a lot of normal faulting type earthquakes concentrate in the central Tibetan plateau. Many of them are nearly perfect normal fault events. The strikes of the fault planes of the normal faulting earthquakes are almost in the N-S direction based on the analyses of the equal area projection diagrams of fault plane solutions. It implies that the dislocation slip vectors of the normal faulting type events have quite great components in the E-W direction. The extension is probably an eastward extensional motion, mainly a tectonic active regime in the altitudes of the plateau. The tensional stress in the E-W or WNW-ESE direction predominates the earthquake occurrence in the normal event region of the central plateau. A number of thrust fault and strike-slip fault type earthquakes with strong compressive stress nearly in the NNE-SSW direction occurred on the edges of the plateau. The eastward extensional motion in the Tibetan plateau is attributable to the eastward movement of materials in the upper mantle based on_seismo-tomographic results. The eastward extensional motion in the Tibetan plateau may be related to the eastward extrusion of hotter mantle materials beneath the east boundary of the plateau. The northward motion of the Tibetan plateau shortened in the N-S direction probably encounters strong obstructions at the western and northern margins. Extensional motions from the relaxation of the topography and/or gravitational collapse in the altitudes of the plateau occur hardly in the N-S direction. The obstruction for the plateau to move eastward is rather weak.展开更多
Although Yitong graben appears in a rift basin region of Eastern China , it is really not a rift basin but a strike-slip depression . Its features are as follows : (1 ) graben is controlled by both east and west bound...Although Yitong graben appears in a rift basin region of Eastern China , it is really not a rift basin but a strike-slip depression . Its features are as follows : (1 ) graben is controlled by both east and west boundary fauns without any relationship with Mono discontinuity figure ; (2 ) there is no alkalic or calc-alkalic igneous rocks in the layer of early and middle period of graben development ; (3 )west boundary fault is a typical strike-slip fault with some what of arc along the strike , and the fault depression locates in the concave of the arc . East boundary fault is a syndepostional normal fault with translational motion ; (4 ) graben has a long and narrow shape with four sags and three bulges alternating each other ; (5 ) the cross section of graben is asymmetric , high in the east and low in the west ; (6 )the lithofacies changes are quite fast in the cross section . Unconfonnities exist in some area of graben ; (7 )the angle between fault 2 and west boundary fault is a acute angle directing the opposite trend of the west side motion of boundary fault ; (8 )the extensional rate of graben is about 12% , less than the rate in Huabei (19%) and Liaohe (20 %)rift basin.展开更多
Submarine volcanism is widely developed in the South China Sea(SCS).However,the characteristics,distribution,and genesis of submarine volcanoes in the southern margin of the SCS remain obscure.In this study,we analyze...Submarine volcanism is widely developed in the South China Sea(SCS).However,the characteristics,distribution,and genesis of submarine volcanoes in the southern margin of the SCS remain obscure.In this study,we analyzed the characteristics of submarine volcanoes and identified a total of 43 submarine volcanoes in the southern margin of the SCS,based on a newly acquired 310-km seismic reflection profile,along with previous 45 multi-channel seismic(MCS)profiles,petrological results from volcanic rocks sampled by dredging and drilling,nearby ocean bottom seismometer(OBS)wide-angle seismic profiles,and gravity and magnetic data.The study ascertains that most of these volcanoes are located in fault-block belts and graben-horst zones with strong crustal stretching and thinning.These volcanoes exhibit positive high-amplitude external seismic reflections,weak and chaotic internal seismic reflections,and are accompanied by local deformation of the surrounding sedimentary strata.Meanwhile,they have higher positive gravity anomalies and higher magnetic anomalies than the background strata.The petrological dating results show that volcanic ages are primarily in the Pliocene-Pleistocene,with geochemical characteristics indicating dominance of oceanic island basalt(OIB)-type alkali-basalts.Extensional faults have obviously spatial correspondence with post-spreading volcanism,suggesting these faults may provide conduits for submarine volcanism.The high-velocity bodies(HVBs)in the lower crust and magma underplating exist in the southern SCS,which could provide a clue of genesis for submarine volcanism.The inference is that the intensity of post-spreading volcanism in the southern margin might be affected by stretching faults,crustal thinning and magma underplating.展开更多
基金Project Study on the Short-term Forecasting Technique of Strong Earthquake (01-04-01) during the Tenth Five-Year Plan from Ministry of Science and Technology of China and Joint Seismological Science Foundation of China (102037).
文摘The spatio-temporal characteristics of acoustic emission (AE) during the deformation of rock samples with compressional and extensional en-echelon faults have been studied. The results show that the pre-existing structure can significantly influence the patterns of AE spatial distribution. With increasing of differential stress, AE events firstly cluster around the two ends of pre-existing faults inside the jog and then along the line joining the two ends. The biggish AE events often occur around one end repeatedly. The image of AE clusters indicates the direction and the area of the fracture propagation. The direction of the macroscopic fracture in extensional and compressional jogs is perpendicular and parallel to the direction of axial stress, respectively. The weakening process before the fracturing of jog area is remarkable, and one of the typical precursors for the instability is that the cumulative frequency of AE events increases exponentially. After the fracturing of the jog the frequency and releasing strain energy of AE events decrease gradually. During the friction period, there is no precursory increasing of AE activity before the big stick-slip events. The change of b value in jog shows a typical change of decreasing tendentiously returning quickly before the instability. The decrease of b value occurs in the process of stress increasing and sometime goes down to the weakening stage, and the quick increase b values appears in a short time just before the instability. The comparative analysis shows that the difference in b value due to the different structures is larger than b value variation caused by increase of the differential stress. For the same sample, the temporal sequence of AE is strongly affected by the mechanical state, and the high loading velocity corresponds to the high release rate of strain energy and low b value. Due to its lower failure strength, the broken area is sensitive to small changes in differential stress. Therefore, it offers a potential explanation for the phenomena of precursory window or sensitive point and separation of seismic source and precursors.
文摘Three series of sandbox modeling experiments were performed to study the fault-increment pattern in extensional basins. Experimental results showed that the tectonic action mode of boundaries and the shape of major boundary faults control the formation and evolution of faults in extensional basins. In the process of extensional deformation, the increase in the number and length of faults was episodic, and every 'episode' experienced three periods, strain-accumulation period, quick fault-increment period and strain-adjustment period. The more complex the shape of the boundary fault, the higher the strain increment each 'episode' experienced. Different extensional modes resulted in different fault-increment patterns. The horizontal detachment extensional mode has the 'linear' style of fault-increment pattern, while the extensional mode controlled by a listric fault has the 'stepwise' style of fault-increment pattern, and the extensional mode controlled by a ramp-flat boundary fault has the 'stepwise-linear' style of fault-increment pattern. These fault-increment patterns given above could provide a theoretical method of fault interpretation and fracture prediction in extensional basins.
文摘Extensional fault-bend folds, also called rollovers, are one of the most common structures in extensional settings. Numerous studies have shown that oblique simple shear is the most appropriate mechanism for quantitative modeling of geometric relations between normal faults and the strata in their hanging walls. However, the oblique simple shear has a rather serious issue derived from the shear direction, particularly above convex bends. We use geometric and experimental methods to study the deformation of extensional fault-bend folds on convex bends. The results indicate that whether the fault bends are concave or convex, the shear direction of the hanging wall dips toward the main fault. On this basis, we improve the previous geometric model by changing the shear direction above the convex bends. To illustrate basin history, our model highlights the importance of the outer limit of folding instead of the growth axial. Moreover, we propose a new expression for the expansion index that is applicable to the condition of no deposition on the footwall. This model is validated by modeling a natural structure of the East China Sea Basin.
基金Supported by the China National Science and Technology Major Project(41872153)Northeast Petroleum University Research Startup Fund(1305021839)。
文摘To evaluate the lateral sealing mechanism of extensional fault based on the pressure difference between fault and reservoir, an integral mathematical-geological model of diagenetic time on diagenetic pressure considering the influence of diagenetic time on the diagenetic pressure and diagenetic degree of fault rock has been established to quantitatively calculate the lateral sealing ability of extensional fault. By calculating the time integral of the vertical stress and horizontal in-situ stress on the fault rock and surrounding rock, the burial depth of the surrounding rock with the same clay content and diagenesis degree as the target fault rock was worked out. In combination with the statistical correlation of clay content, burial depth and displacement pressure of rock in the study area, the displacement pressure of target fault rock was calculated quantitatively. The calculated displacement pressure was compared with that of the target reservoir to quantitatively evaluate lateral sealing state and ability of the extensional fault. The method presented in this work was used to evaluate the sealing of F_(1), F_(2) and F_(3) faults in No.1 structure of Nanpu Sag, and the results were compared with those from fault-reservoir displacement pressure differential methods without considering the diagenetic time and simple considering the diagenetic time. It is found that the results calculated by the integral mathematical-geological model are the closest to the actual underground situation, the errors between the hydrocarbon column height predicted by this method and the actual column height were 0–8 m only, proving that this model is more feasible and credible.
文摘Extensional basins include mainly grabens and half grabens displaced along alower detachment. Based on area balance theory, there is a linear relationship between a height ofregional and the lower detachment h on the outside of the basin and 'lost area S' from the regionalin the basin. The pre-growth beds above lower detachment are of the same extensional displacement sothat an 'S-h diagram' can be used to determine the depth to lower detachment and to calculate thetotal extensional displacement of the beds above the lower detachment. The extensional displacementis dominated by the heave of various scale normal faults. The displacement of obvious faults can beimmediately figured out from the measured bed-length. The requisite extension calculated by areabalance is the layer-parallel strain, which could be accommodated by displacement on sub-resolutionfaults. Accordingly, the layer-parallel strain can help us predict the magnitude and distribution ofsub-resolution faults on the basis of analysis of the structural style and rheological behavior.
文摘The Erlian fault basin group, a typical Basin and Range type fault basin group, was formed during Late Jurassic to Early Cretaceous, in which there are rich coal, oil and gas resources. In the present paper the abundant geological and petroleum information accumulated in process of industry oil and gas exploration and development of the Erlian basin group is comprehensively analyzed, the structures related to formation of basin are systematically studied, and the complete extensional tectonic system of this basin under conditions of wide rift setting and low extensional ratio is revealed by contrasting study with Basin and Range Province of the western America. Based on the above studies and achievements of the former workers, the deep background of the basin development is treated.
文摘Dextral-slip in the Nyainqentanglha region of Tibet resulted in oblique underthrusting and granite generation in the Early to Middle Miocene, but by the end of the epoch uplift and extensional faulting dominated. The east-west dextral-slip Gangdise fault system merges eastward into the northeast-trending, southeast-dipping Nyainqentanglha thrust system that swings eastward farther north into the dextral-slip North Damxung shear zone and Jiali faults. These faults were took shape by the Early Miocene, and the large Nyainqentanglha granitic batholith formed along the thrust system in 18.3-11.0 Ma as the western block drove under the eastern one. The dextral-slip movement ended at -11 Ma and the batholith rose, as marked by gravitational shearing at 8.6-8.3 Ma, and a new fault system developed. Northwest-trending dextral-slip faults formed to the northwest of the raisen batholith, whereas the northeast-trending South Damxung thrust faults with some sinistral-slip formed to the southeast. The latter are replaced farther to the east by the west-northwest-trending Lhtinzhub thrust faults with dextral-slip. This relatively local uplift that left adjacent Eocene and Miocene deposits preserved was followed by a regional uplift and the initiation of a system of generally north-south grabens in the Late Miocene at -6.5 Ma. The regional uplift of the southern Tibetan Plateau thus appears to have occurred between 8.3 Ma and 6.5 Ma. The Gulu, DamxungYangbajain and Angan graben systems that pass east of the Nyainqentanglha Mountains are locally controlled by the earlier northeast-trending faults. These grabens dominate the subsequent tectonic movement and are still very active as northwest-trending dextral-slip faults northwest of the mountains. The Miocene is a time of great tectonic change that ushered in the modern tectonic regime.
基金sponsored jointly by the National Natural Science Foundation of China(Grant No.41102087)the National Key Basic Research Program of China(No.2005CB422103)+1 种基金National"973"program(Grant No.2012CB214802)Major National Sci-Tech Projects(Grant Nos.2011ZX05005-002-010HZ. 2011ZX05009-002)
文摘The fact that several half-grabens and normal faults developed in the Lower--Middle Cambrian of Tazhong (central Tarim Basin) and Bachu areas in Tarim Basin, northwest China, indicates that Tarim Basin was under extensional tectonic setting at this time. The half-grabens occur within a linear zone and the normal faults are arranged in en echelon patterns with gradually increasing displacement eastward. Extensional tectonics resulted in the formation of a passive continental margin in the southwest and a cratonic margin depression in the east, and most importantly, influenced the development of a three- pronged rift in the northeast margin of the Tarim Basin. The fault system controlled the development of platform -- slope -- bathyal facies sedimentation of mainly limestone-dolomite-gypsum rock-saline rock-red beds in the half-grabens. The NW-SE trending half-grabens reflect the distribution of buried basement faults.
基金supported by the Natural Science Foundation of China (No. 40674026)Commonweal Special Science Foundation of China (Grant No. 200811037)
文摘This paper analyzes various earthquake fault types, mechanism solutions, stress field as well as other geophysical data to study the crust movement in the Tibetan plateau and its tectonic implications. The results show that a lot of normal faulting type earthquakes concentrate in the central Tibetan plateau. Many of them are nearly perfect normal fault events. The strikes of the fault planes of the normal faulting earthquakes are almost in the N-S direction based on the analyses of the equal area projection diagrams of fault plane solutions. It implies that the dislocation slip vectors of the normal faulting type events have quite great components in the E-W direction. The extension is probably an eastward extensional motion, mainly a tectonic active regime in the altitudes of the plateau. The tensional stress in the E-W or WNW-ESE direction predominates the earthquake occurrence in the normal event region of the central plateau. A number of thrust fault and strike-slip fault type earthquakes with strong compressive stress nearly in the NNE-SSW direction occurred on the edges of the plateau. The eastward extensional motion in the Tibetan plateau is attributable to the eastward movement of materials in the upper mantle based on_seismo-tomographic results. The eastward extensional motion in the Tibetan plateau may be related to the eastward extrusion of hotter mantle materials beneath the east boundary of the plateau. The northward motion of the Tibetan plateau shortened in the N-S direction probably encounters strong obstructions at the western and northern margins. Extensional motions from the relaxation of the topography and/or gravitational collapse in the altitudes of the plateau occur hardly in the N-S direction. The obstruction for the plateau to move eastward is rather weak.
文摘Although Yitong graben appears in a rift basin region of Eastern China , it is really not a rift basin but a strike-slip depression . Its features are as follows : (1 ) graben is controlled by both east and west boundary fauns without any relationship with Mono discontinuity figure ; (2 ) there is no alkalic or calc-alkalic igneous rocks in the layer of early and middle period of graben development ; (3 )west boundary fault is a typical strike-slip fault with some what of arc along the strike , and the fault depression locates in the concave of the arc . East boundary fault is a syndepostional normal fault with translational motion ; (4 ) graben has a long and narrow shape with four sags and three bulges alternating each other ; (5 ) the cross section of graben is asymmetric , high in the east and low in the west ; (6 )the lithofacies changes are quite fast in the cross section . Unconfonnities exist in some area of graben ; (7 )the angle between fault 2 and west boundary fault is a acute angle directing the opposite trend of the west side motion of boundary fault ; (8 )the extensional rate of graben is about 12% , less than the rate in Huabei (19%) and Liaohe (20 %)rift basin.
基金Supported by the National Key Research and Development Program of China(No.2022YFC3102200)the Guangdong Research Foundation(No.2019BT02H594)+3 种基金the National Natural Science Foundation of China(No.42076071)the Key Special Project for Introduced Talents Team of the Southern Marine Science and Engineering Guangdong Laboratory(Guangzhou)(No.GML2019ZD0204)the Strategic Priority Research Program of the Chinese Academy of Sciences(No.XDA22020303)the Key Research Program of the Chinese Academy of Sciences(No.ZDRW-XH-2021-2-02)。
文摘Submarine volcanism is widely developed in the South China Sea(SCS).However,the characteristics,distribution,and genesis of submarine volcanoes in the southern margin of the SCS remain obscure.In this study,we analyzed the characteristics of submarine volcanoes and identified a total of 43 submarine volcanoes in the southern margin of the SCS,based on a newly acquired 310-km seismic reflection profile,along with previous 45 multi-channel seismic(MCS)profiles,petrological results from volcanic rocks sampled by dredging and drilling,nearby ocean bottom seismometer(OBS)wide-angle seismic profiles,and gravity and magnetic data.The study ascertains that most of these volcanoes are located in fault-block belts and graben-horst zones with strong crustal stretching and thinning.These volcanoes exhibit positive high-amplitude external seismic reflections,weak and chaotic internal seismic reflections,and are accompanied by local deformation of the surrounding sedimentary strata.Meanwhile,they have higher positive gravity anomalies and higher magnetic anomalies than the background strata.The petrological dating results show that volcanic ages are primarily in the Pliocene-Pleistocene,with geochemical characteristics indicating dominance of oceanic island basalt(OIB)-type alkali-basalts.Extensional faults have obviously spatial correspondence with post-spreading volcanism,suggesting these faults may provide conduits for submarine volcanism.The high-velocity bodies(HVBs)in the lower crust and magma underplating exist in the southern SCS,which could provide a clue of genesis for submarine volcanism.The inference is that the intensity of post-spreading volcanism in the southern margin might be affected by stretching faults,crustal thinning and magma underplating.