Extracts are important components of fuels. Fatty-extracts with high heating value （HV） are hypothe- sized by researchers as positively related to the HV of fuels. The Soxhlet extractor is typically used to extract ...Extracts are important components of fuels. Fatty-extracts with high heating value （HV） are hypothe- sized by researchers as positively related to the HV of fuels. The Soxhlet extractor is typically used to extract fatty-extracts but it has shortcomings, including long processing time （8-10 h） and the requirement for large amounts of organic solvent. Supercritical extraction is an alternate and useful technique for extraction of natural products. However, published studies rarely discuss the relationship between extracts and HV. In this study, we assessed the supercritical extracts （SUE） of forest fuels in the Great Xing＇an Mountains. Our results indicated that the optimum conditions for extraction of SuEs were 40-60 mesh, 40-50 MPa, 45℃, 80 min and a CO2 flow rate of 1.5-2.0 dm3/min. The Soxhlet extracts contents and the SuE contents were all related to HV. However, R2 of the coniferous samples （0.8499） and needle samples （0.9722） demonstrated that the correlation between HV and the SuE content was closer. We conclude that supercritical fatty-extracts provide a useful index of the HV of fuels, especially coniferous fuels. SuE data can be used in fire management, for example to estimate the rate of fire spread or fire intensity.展开更多
Poly(1,1,2,2- tetrahydroperfluorodecyl acrylate) (poly (TA-N)) was synthesized in laboratory. The resulting morphology of rapid expansion of supercritical solution (RESS) sprays of poly(TA - N) was investigated. At ap...Poly(1,1,2,2- tetrahydroperfluorodecyl acrylate) (poly (TA-N)) was synthesized in laboratory. The resulting morphology of rapid expansion of supercritical solution (RESS) sprays of poly(TA - N) was investigated. At apre - expansion temperature of 45℃), amorphous polymer was formed. At temperature around 60 ℃ to 80 ℃ , fibers were formed. Increase of temperature increasesparticle size slightly. At temperature of 105℃ , most of particles are spheres. The RESS is an attractive process. To apply the polymers desired for coating applications in an organic solvent - free process that is economically viable , and it will have implications for pollution prevention during polymer film展开更多
In this paper, compressible flow of aviation kerosene at supercritical conditions has been studied both numerically and experimentally. The thermophysical properties of supercritical kerosene are calculated using a 10...In this paper, compressible flow of aviation kerosene at supercritical conditions has been studied both numerically and experimentally. The thermophysical properties of supercritical kerosene are calculated using a 10- species surrogate based on the principle of extended corresponding states （ECS）. Isentropic acceleration of supercritical kerosene to subsonic and supersonic speeds has been analyzed numerically. It has been found that the isentropic relationships of supercritical kerosene are significantly dif- ferent from those of ideal gases, A two-stage fuel heating and delivery system is used to heat the kerosene up to a tem- perature of 820 K and pressure of 5.5 MPa with a maximum mass flow rate of 100 g/s. The characteristics of supercritical kerosene flows in a converging-diverging nozzle （Laval nozzle） have been studied experimentally. The results show that stable supersonic flows of kerosene could be established in the temperature range of 730 K-820 K and the measurements in the wall pressure agree with the numerical calculation.展开更多
基金sponsored by the National Natural Science Foundation of China(Grant number:31170618)the National Key Technologies R&D Program of China(Grant number2011BAD32B05)
文摘Extracts are important components of fuels. Fatty-extracts with high heating value （HV） are hypothe- sized by researchers as positively related to the HV of fuels. The Soxhlet extractor is typically used to extract fatty-extracts but it has shortcomings, including long processing time （8-10 h） and the requirement for large amounts of organic solvent. Supercritical extraction is an alternate and useful technique for extraction of natural products. However, published studies rarely discuss the relationship between extracts and HV. In this study, we assessed the supercritical extracts （SUE） of forest fuels in the Great Xing＇an Mountains. Our results indicated that the optimum conditions for extraction of SuEs were 40-60 mesh, 40-50 MPa, 45℃, 80 min and a CO2 flow rate of 1.5-2.0 dm3/min. The Soxhlet extracts contents and the SuE contents were all related to HV. However, R2 of the coniferous samples （0.8499） and needle samples （0.9722） demonstrated that the correlation between HV and the SuE content was closer. We conclude that supercritical fatty-extracts provide a useful index of the HV of fuels, especially coniferous fuels. SuE data can be used in fire management, for example to estimate the rate of fire spread or fire intensity.
文摘Poly(1,1,2,2- tetrahydroperfluorodecyl acrylate) (poly (TA-N)) was synthesized in laboratory. The resulting morphology of rapid expansion of supercritical solution (RESS) sprays of poly(TA - N) was investigated. At apre - expansion temperature of 45℃), amorphous polymer was formed. At temperature around 60 ℃ to 80 ℃ , fibers were formed. Increase of temperature increasesparticle size slightly. At temperature of 105℃ , most of particles are spheres. The RESS is an attractive process. To apply the polymers desired for coating applications in an organic solvent - free process that is economically viable , and it will have implications for pollution prevention during polymer film
基金supported by the National Natural Science Foundation of China (10672169 and 10902115)
文摘In this paper, compressible flow of aviation kerosene at supercritical conditions has been studied both numerically and experimentally. The thermophysical properties of supercritical kerosene are calculated using a 10- species surrogate based on the principle of extended corresponding states （ECS）. Isentropic acceleration of supercritical kerosene to subsonic and supersonic speeds has been analyzed numerically. It has been found that the isentropic relationships of supercritical kerosene are significantly dif- ferent from those of ideal gases, A two-stage fuel heating and delivery system is used to heat the kerosene up to a tem- perature of 820 K and pressure of 5.5 MPa with a maximum mass flow rate of 100 g/s. The characteristics of supercritical kerosene flows in a converging-diverging nozzle （Laval nozzle） have been studied experimentally. The results show that stable supersonic flows of kerosene could be established in the temperature range of 730 K-820 K and the measurements in the wall pressure agree with the numerical calculation.
