The aim of this work is to develop a three-dimensional model of deep groove ball bearing to investigate the loaded stresses and central displacements of bearing rings. The equivalent stresses and central displacements...The aim of this work is to develop a three-dimensional model of deep groove ball bearing to investigate the loaded stresses and central displacements of bearing rings. The equivalent stresses and central displacements of bearing rings are obtained based on the simulated analysis. Moreover, several parameters, such as load magnitude, raceway groove curvature radius(RGCR), thicknesses of outer and inner rings, are varied to investigate their effects on the equivalent stresses and central displacements of bearing rings. Research results provide useful guidelines for determining the design parameters.展开更多
Rolling bearing is widely used in mechanical support, its general components are the inner ring, outer ring, the ball, retainer etc.. Now many companies in developed countries and university in the rolling bearing as ...Rolling bearing is widely used in mechanical support, its general components are the inner ring, outer ring, the ball, retainer etc.. Now many companies in developed countries and university in the rolling bearing as the research object, and has made great progress in design theory, the experiment method and production technology etc. We will use the finite element ANSYS to establish the model of deep groove ball bearing. Through the contact analysis, we can get the contact stress between the rings and balls, strain, contact state, penetration, sliding distance and the friction stress distribution. These values are compared to the theoretical values with Hertz theory, and they have better consistency, provide the good theoretical basis for the optimization design of rolling bearings.展开更多
Based on numerical simulation, the influences of outer raceway curvature radii on some EHL properties of deep groove ball bearing were studied in detail. It was found that the second peak film pressure value decreases...Based on numerical simulation, the influences of outer raceway curvature radii on some EHL properties of deep groove ball bearing were studied in detail. It was found that the second peak film pressure value decreases with the increase of curvature radius Ry. The minimal film thickness increases at first and then decreases with the increase of curvature radius Ry. The minimum film thickness reaches the maximal value when curvature radius Ry is about 1.7r. Film thickness becomes thinner with the increase of Rx with keeping other parameters constant. The conclusions obtained in this paper are very helpful to practical design of ball bearings.展开更多
Lieblein J. and Zelen A. conducted a study of the fatigue life of deep groove ball bearings. This study was based on data of 4948 bearings as obtained from 5 companies and 213 test groups. Among these data is a detail...Lieblein J. and Zelen A. conducted a study of the fatigue life of deep groove ball bearings. This study was based on data of 4948 bearings as obtained from 5 companies and 213 test groups. Among these data is a detailed test report #3183, lot 73, consisting of 23 failed bearings. This report states that the Weibull slope of this group is 2.23, meaning that this distribution is mono sloped. These test data were plotted by the author on a bilinear scale plane, of endurance life versus bearing number and proved to be distinctly bi sloped. This basic difference prompted a wide study resulting in several new findings and set the grounds for a new analysis method.展开更多
基金the National Natural Science Foundation of China (No. 51605354)the Fundamental Research Funds for the Central Universities (WUT: 2015IVA021)+1 种基金the Innovative Research Team Development Program of Ministry of Education of China (No. IRT13087)the High-end Talent Leading Program of Hubei Province (No. 201286)
文摘The aim of this work is to develop a three-dimensional model of deep groove ball bearing to investigate the loaded stresses and central displacements of bearing rings. The equivalent stresses and central displacements of bearing rings are obtained based on the simulated analysis. Moreover, several parameters, such as load magnitude, raceway groove curvature radius(RGCR), thicknesses of outer and inner rings, are varied to investigate their effects on the equivalent stresses and central displacements of bearing rings. Research results provide useful guidelines for determining the design parameters.
基金Supported by Fundamental Research Funds for Central Universities(No.FRF-TP-12-067A)
文摘Rolling bearing is widely used in mechanical support, its general components are the inner ring, outer ring, the ball, retainer etc.. Now many companies in developed countries and university in the rolling bearing as the research object, and has made great progress in design theory, the experiment method and production technology etc. We will use the finite element ANSYS to establish the model of deep groove ball bearing. Through the contact analysis, we can get the contact stress between the rings and balls, strain, contact state, penetration, sliding distance and the friction stress distribution. These values are compared to the theoretical values with Hertz theory, and they have better consistency, provide the good theoretical basis for the optimization design of rolling bearings.
文摘Based on numerical simulation, the influences of outer raceway curvature radii on some EHL properties of deep groove ball bearing were studied in detail. It was found that the second peak film pressure value decreases with the increase of curvature radius Ry. The minimal film thickness increases at first and then decreases with the increase of curvature radius Ry. The minimum film thickness reaches the maximal value when curvature radius Ry is about 1.7r. Film thickness becomes thinner with the increase of Rx with keeping other parameters constant. The conclusions obtained in this paper are very helpful to practical design of ball bearings.
文摘Lieblein J. and Zelen A. conducted a study of the fatigue life of deep groove ball bearings. This study was based on data of 4948 bearings as obtained from 5 companies and 213 test groups. Among these data is a detailed test report #3183, lot 73, consisting of 23 failed bearings. This report states that the Weibull slope of this group is 2.23, meaning that this distribution is mono sloped. These test data were plotted by the author on a bilinear scale plane, of endurance life versus bearing number and proved to be distinctly bi sloped. This basic difference prompted a wide study resulting in several new findings and set the grounds for a new analysis method.
