Force Requirement for Stump Lifting

In cutting areas, soil preparation is occasionally necessary before reforestation. The aim of this action is a spatial planning that enables to perform further operations without problems. The removal, collection and transportation of stumps from the soil are part of this action. Issues related to climate change and the shortcoming of fossil energy sources call attention to increase the rate of renewable energy sources. Using the stumps removed from the soil as fuel is a significant resource within the biomass potential. For lifting a stump together with its roots, a grab mounted on a shovel is generally used. The utilisation of the lifted stumps for energy purposes increased worldwide, especially in the Scandinavian countries. In order to rationalise this operation, analyses of stump lifting time have been carried out. Results of some Hungarian experiments are presented below. The authors tested a machine mounting one grab for stump lifting on three tree types （Scots pine, robinia and poplar） and found functions correlating stump extraction force and stump diameter, which can be used in order to choose the right machine and determine the cost of the operation.

Water blocking effect caused by the use of hydraulic methods for permeability enhancement in coal seams and methods for its removal

To research techniques for removing the water blocking effect caused by hydraulic applications in coal seams,the use of surfactants is proposed,based on the mechanics of the water blocking effect.Centrifugal experiments were used to validate the effects of using surfactants;the results show that after dealing with vacuum saturation with water,the volume of micropores decreases,which results in a larger average pore size,and the volume of transitional pores,mesopores,macropores and total pores increases.Based on the distribution of pore size,the operation mode of ‘‘water infusion after gas extraction,then continuing gas extraction" is recommended to improve the volume of coal mine gas drainage.When the reflectance of vitrinite in coal samples is less than 1,using the surfactants Fast T,1631,APG,BS can mitigate the damage caused by the water blocking effect.But when the reflectance of vitrinite is larger than 1.4,the damage caused by the water blocking effect can be increased.When the surfactant CMC is used in hydraulic applications,the capillary forces of coal samples are almost negative,which means the capillary force is in the same direction as the gas extraction.The direction of capillary forces benefits the gas flow.So,using CMC can play an active role in removing the water blocking effect.Centrifugal experiments confirm that using CMC can effectively remove the water blocking effect,which has a beneficial effect on improving the gas drainage volume.

Automatic extraction method of force chain information and its application in the flow photoelastic experiment of granular matter

The force chain is the core of the multi-scale analysis of granular matter.Accurately extracting the force chain information among particles is of great significance to the study of particle mechanics and geological hazards caused by particle flow.However,in the photoelastic experiment,the precise identification of the branching points of force chains has not been effectively realized.Therefore,this study proposes an automatic extraction method of force chain key information.First,based on the Hough transform and the Euclidean distance,a particle geometric information identification model is established and geometric information such as particle circle center coordinates,radius,contact point location,and contact angle is extracted.Then,a particle contact force information identification model is established following the color gradient mean square method.The model realizes the rapid calibration and extraction of a large number of particle media contact force information.Next,combined with the force chain composition criterion and its quasilinear feature,an automatic extraction method of force chain information is established,which solves the problem of the accurate identification of the force chain branch points.Finally,in the photoelastic experiment of ore drawing from a single drawpoint,the automatic extraction method of force chain information is verified.The results show that the macroscopic distribution of force chains during ore drawing from a single drawpoint is left–right symmetrical.Strong force chains are mostly located on the two sides of the model but in small numbers and they mainly develop vertically.Additionally,the ends are mostly in a combination of Y and inverted Y shapes,while the middle is mostly quasilinear.Weak force chains are abundant and mostly distributed in the middle of the model,and develop in different directions.The proposed extraction method accurately extracts the force chain network from the photoelastic experiment images and dynamically characterizes the force chains of granular matter,which has significant advantages in particle geometry information extraction,force chain branch point discrimination,force chain retrieval,and force chain distribution and its azimuthal characterization.The results provide a scientific basis for studying the macroscopic and microscopic mechanical parameters of granular matter.