Garlic extract addition for soil improvement at various temperatures using enzyme-induced carbonate precipitation (EICP) method

Enzyme-induced carbonate precipitation (EICP) is an emerging technique to improve the soil and most studies are carried out at room temperature. However, considering some foundations are in high-temperature environments (>40 ℃), the higher urease activity at high temperature results in the solidification inhomogeneity, limiting the application of EICP. The higher urease activity at high temperature hampers the application of EICP because of solidification inhomogeneity. The garlic extract has been used as a type of urease inhibitor in medical science and food engineering. Here, we propose to use it to control urease activity for sand solidification at high temperature. The effects of garlic extract addition on urease activity and precipitation rates for calcium carbonate (CaCO_(3)) were studied. Extra tests were conducted to study the effect of garlic extract addition on the solidification homogeneity. The results showed that the garlic extract addition significantly decreased urease activity. To reduce the rate of CaCO3 precipitation at different temperatures, a suitable concentration of garlic extract was necessary to obtain a suitable urease activity. In the sand solidification test, garlic extract addition resulted in a smaller difference in sonic time values or CaCO_(3) contents at different parts of samples. The improved solidification homogeneity can achieve higher strength. The correlation between sonic time values and CaCO_(3) content was higher than that between CaCO3 content and strength. Appropriate concentrations of garlic extract were obtained at 35 ℃, 40℃, 45 ℃, 50 ℃, and 55 ℃. The proposed garlic extract addition method was significant to improve the homogeneity of solidified soil in practical engineering applications.

Improved continuous precipitation kinetics and tensile properties of extruded AZ80 alloy through {10-12} twin formation

This study investigates the effect of{10-12}deformation twins on the continuous precipitation behavior of an extruded Mg-8.0Al-0.5Zn-0.2Mn(AZ80)alloy during aging.The extruded AZ80 alloy is compressed along the transverse direction to introduce{10-12}twins,followed by an aging treatment at 300℃.The extruded material exhibits a twin-free microstructure with low internal strain energy,whereas the pre-twinned material possesses abundant{10-12}twins and has high internal strain energy.The aging results reveal that the peak-aging time of the pre-twinned material(1 h)is one-eighth of that of the extruded material(8 h).Although Mg_(17)Al_(12)continuous precipitates(CPs)are observed in both the peak-aged materials,these CPs are much smaller and more densely distributed in the pre-twinned material despite the significantly shorter aging time.The CPs size in the peak-aged materials increases in the following order:twinned region in the pre-twinned material(0.47μm)<residual matrix region in the pre-twinned material(1.71μm)<matrix region in the extruded material(2.55μm).Moreover,the CPs number density in the twinned region of the pre-twinned material is approximately 11 times higher than that in the matrix region of the extruded material.The peak-aged pre-twinned material exhibits significantly higher tensile strength and ductility than the peak-aged extruded material.These results demonstrate that the formation of{10-12}twins in the extruded AZ80 alloy substantially accelerates the static precipitation of CPs during aging at 300℃and improves the tensile properties of the peak-aged material.

Solvent extraction mechanism and precipitation stripping of bismuth(Ⅲ) in hydrochloric acid medium by tributyl phosphate

Tributyl phosphate(TBP) was employed for the Bi(Ⅲ) extraction from hydrochloric acid medium.The effects of extraction time and material concentration were examined.The replacement mechanism between the anion(Cl^-) and TBP was proposed for extraction.The results show the species extracted into the organic phase were found to be mainly BiCl_3·x TBP(x=2 or 3).Thermodynamic parameters of the extraction reaction were obtained from the thermodynamics analysis,which illustrates that higher temperatures show a negative effect on the extraction.Extraction isotherm was obtained with 2.16 mol/L TBP for a typical solution containing 0.1 mol/L of bismuth and 1.0 mol/L of hydrochloric acid.About 98.5 % of bismuth has been extracted from the leaching solution under the optimum condition.Moreover,oxalate was explored as a precipitation stripping agent for BiCl_3·x TBP(x=2 or 3) complexes,by which Bi(Ⅲ) was stripped in the form of Bi_2(C_2O_4)_3·7H_2O.A stripping efficiency of 99.3% was obtained in only one stage at the phase ratio of 1 and TBP also could be recycled.Therefore,the method is an efficient,effective and highly selective approach to extract Bi(Ⅲ) and to recover metal bismuth.

磁分散固相萃取-高效液相色谱法检测人体尿样中天麻素

建立了一种磁分散固相萃取技术结合高效液相色谱法,用于快速检测人体尿液样本中的天麻素。采用化学共沉淀法自组装制备磁性活性炭/大孔树脂三元复合材料(Fe_3O_(4)/AC/MR),并将该材料用作吸附剂,实现尿液样本中天麻素的分离富集。在最佳实验条件下,天麻素浓度与峰面积间呈良好线性关系,线性范围为3.0×10^(-2)~10.0μg·mL^(-1),线性相关系数为0.9994,检出限为5.4μg·L^(-1)。以模拟人体尿液作为实际样品进行加标回收验证,加标回收率为94.87%~106.3%,相对标准偏差(RSD)在2.8%-4.2%之间。本研究建立的方法简便、快速、有效,为生物样本中天麻素的分离提纯提供了新方法。

Synthesis and Solid Phase Extraction Performance Study of NNAL-specific Molecularly Imprinted Polymers Using Dummy Templates

Dummy molecularly imprinted polymers （DMIPs） for 4-（methylnitrosamino）-1-（3-pyridyl）-1-butanol （NNAL） were produced using three structural analogues as dummy template molecules. The chosen analogues were 4-（acetymethylamino）-1-（3-pyridyl）-butanol, 4- （methylamino）-1-（3-pyridyl）-1-butanol, and 1-（3-pyridyl）-1,4,-butanediol. The molecular recognition characteristics of the produced polymers were evaluated by X-ray photoelec- tron spectroscopy （XPS） and Fourier transform infrared spectroscopy （FT-IR）. Interactions between NNAL and methacrylic acid should be cooperative hydrogen bonds while the ni- trogen atom of the pyridine ring and the oxygen atom of the nitroso group in NNAL are two of the hydrogen-bond acceptors. It was further demonstrated that DMIP synthesized by 4-（acetymethylamino）-1-（3-pyridyl）-butanol had the best binding performance by XPS and FT-IR. Then dummy molecularly imprinted solid phase extraction （DMISPE） was developed for the determination of the analyte using the hit polymer as the sorbing material. Under optimal conditions, the recovery of NNAL dissolved in standard solution reached 93%. And the investigated polymer exhibited much higher binding of NNAL when nicotine was acted as the competitive molecule. Also the proposed method was applied to the measurement of NNAL spiked in blank urine samples with recoveries ranging from 87.2% to 101.2%.

Parameter Extraction for 2-π Equivalent Circuit Model of RF CMOS Spiral Inductors

A novel parameter extraction method with rational functions is presented for the 2-πequivalent circuit model of RF CMOS spiral inductors. The final S-parameters simulated by the circuit model closely match experimental data. The extraction strategy is straightforward and can be easily implemented as a CAD tool to model spiral inductors. The resulting circuit models will be very useful for RF circuit designers.

Field trial on use of soybean crude extract for carbonate precipitation and wind erosion control of sandy soil

Wind erosion is a major cause of land desertification and sandstorm formation in arid and semi-arid areas.The objective of this study was to evaluate the potential of soybeans crude extract induced calcium carbonate precipitation(SICP)on reducing wind erosion risk of sandy soil.Field tests were carried out in Ulan Buh Desert,Ningxia Hui Autonomous Region,China.Results showed that the SICP method could significantly enhance the surface strength and wind erosion resistance of the topsoil.The optimal cementation solution(urea-CaCl2)concentration and spraying volume,according to experiments conducted on sandy land,were 0.2 mol/L and 4 L/m^2,respectively.Under this condition,the CaCO3 content was approximately 0.45%,the surface strength of sandy soil could reach 306.2 kPa,and the depth of wind erosion was approximately zero,after 30 d completion of SICP treatment.Soil surface strength declined with the increase of time,and long-term sand fixation effects of SICP treatment varied depending on topography.Whereas wind erosion in the top area of the windward slope was remarkable,sandy soils on the bottom area of the windward slope still maintained a relatively high level of surface strength and a low degree of wind erosion 12 month after SICP treatment.Scanning electron microscopy(SEM)tests with energy dispersive X-ray(EDX)confirmed the precipitation of CaCO3 and its bridge effect.These findings suggested that the SICP method is a promising candidate to protect sandy soil from wind erosion in desert areas.

Integrative Extraction of Ergosterol, （1→3）-α-D-Glucan and Chitosan from Penicillium chrysogenum Mycelia

Abstract Ergosterol,（1→3）-α-D-glucan and chitosan are important biomaterials. In this research, a process has been developed to integratively extract ergosterol, （1→3）-α-D-glucan, and chitosan from Penicillium chrysongenum mycelium. First the mycelia are pretreated with 0.1mol·L^-1 of NaOH. After recovery by centrifugation the solid portion is made to undergo saponification and deacetylation reactaons by addition of 2mol·L^-1 NaOH and et anol.After reaction, extraction is carried out by addition of petroleum ether, which separates the reaction mixture into two phases. The upper layer of petroleum ether contains extracted ergosterol, and the .bottom layer of NaOH solution contains （1→3）-α-DEglucan; the chitosan is on the mycelia residuum. After isolation, the recovery yield of ergosterol is 0.52% of dry mycelium. That of （1→3）-α-D-glucan is about 8.2%; and chitosan is 5.7% with 86% deacetylation. The compositions have been characterized by 1R, HPLC analyses.

Improvement of 6–15 Day Precipitation Forecasts Using a Time-Lagged Ensemble Method

A time-lagged ensemble method is used to improve 6-15 day precipitation forecasts from the Beijing Climate Center Atmospheric General Circulation Model,version 2.0.1.The approach averages the deterministic predictions of precipitation from the most recent model run and from earlier runs,all at the same forecast valid time.This lagged average forecast （LAF） method assigns equal weight to each ensemble member and produces a forecast by taking the ensemble mean.Our analyses of the Equitable Threat Score,the Hanssen and Kuipers Score,and the frequency bias indicate that the LAF using five members at time-lagged intervals of 6 h improves 6-15 day forecasts of precipitation frequency above 1 mm d-1 and 5 mm d-1 in many regions of China,and is more effective than the LAF method with selection of the time-lagged interval of 12 or 24 h between ensemble members.In particular,significant improvements are seen over regions where the frequencies of rainfall days are higher than about 40％-50％ in the summer season; these regions include northeastern and central to southern China,and the southeastem Tibetan Plateau.

Simple Modifications to Standard TRIzol®Protocol Allow High-Yield RNA Extraction from Cells on Resorbable Materials

Resorbable bioceramics are attractive for medical applications such as bone substitution. Biochemical analysis on cells cultured on these biomaterials is vital to predict the impact of the materials in vivo and RNA extraction is an essential step in gene expression study using RT-qPCR. In this study, we describe simple modifications to the TRIzol? RNA extraction protocol widely used in biology and these allow high-yield extraction of RNA from cells on resorbable calcium phosphates. Without the modifications, RNA is trapped in the co-precipitated calcium compounds, rendering TRIzol? extraction method infeasible. Among the modifications, the use of extra TRIzol? to dilute the lysate before the RNA precipitation step is critical for extraction of RNA from porous ?-tricalcium phosphate (?-TCP) discs. We also investigate the rationale behind the undesirable precipitation so as to provide clues about the modifications required for other resorbable materials with high application potential in bone tissue engineering.

Matrix Solid-phase Dispersion Extraction of Alkaloids from the Roots of Aconitum kusnezoffii Reichb

Matrix solid-phase dispersion（MSPD） was developed for the extraction of four alkaloids, including aconitine, mesaconitine, hypaconitine and deoxyaconitine, from the roots ofAconitum kusnezoffii Reichb. The determination of the analyte was carried out by high performance liquid chromatography with UV detection. The alkaline alumina was used as sorbent. The mixture of acetonitrile and water was used as elution solvent. Several extraction parameters, such as type of sorbent, the ratio of sample to solid support material, type of the elution solvent and the volume of the elution solvent were tested. Mean recoveries ranged from 93.16% to 102.73%, with relative standard deviations from 0.27% to 4.17%. With the extraction efficiency and time expenditure taken into account, MSPD extraction should be a comparatively good method.

Extraction of essential oil from shaddock peel and analysis of its components by gas chromatography-mass spectrometry

Essential oil, with more than thirty kinds of compounds separated and identified by gas chromatography-mass spectrometry, was extracted from Shatian shaddock peel and Sweet shaddock peel by squeeze-steam distillation and direct steam distillation method. Among their composition, the main components are terpene compounds, which account for 93.926% (mass fraction, the same below) and 85.843% of essential oils extracted from Shatian shaddock peel and Sweet shaddock peel, respectively. Although nootkatone is the major contributor of shaddock characteristic scent, and its contents are 1.069% and 1.749% of essential oils from Sweet shaddock peel and Shatian shaddock peel, respectively. The results show that squeeze-steam distillation gives higher yield and good quality of essential oil and the compositions of essential oils from two kinds of shaddock peels are different, but the main contributors of the shaddock scent are the same.

Solvent extraction of copper and ammonia from ammoniacal solutions using sterically hindered β-diketone

Extraction of copper and ammonia from Cu2+-NH3-Cl--H2O solution using laboratorialy synthesized sterically hindered β-diketone(4,4-dimethyl-1-(4-dodecylphenyl)-1,3-pentanedione) was studied.The effects of the copper concentration,the total ammonia concentration,the initial pH in the aqueous phase,the phase ratio,and the temperature on copper extraction ratio and ammonia extraction in loaded organic phase were investigated using this sterically hindered β-diketone.Under the conditions of temperature 25℃,contact time of two phases 30 min,phase ratio 1-1,concentration of copper 3 g/L,concentration of total ammonia 3 mol/L,aqueous pH 8.43,and the concentration of β-diketone in organic phase 20%(volume fraction),ammonia in aqueous phase is much lower to be extracted by organic phase(just 14.5 mg/L),while the extraction rate of copper is 95.09%.

Extraction Equilibria of Trimellitic and [ 1,1′-Biphenyl]-2,2′-dicarboxylic Acid with 1-Octanol, 50%TBP, and 10%TRPO in Kerosene

To explore the feasibility of extracting aromatic acid products from oxidizing coal, two aromatic acids, trimellitic and [1,1′-biphenyl]-2,2′-dicarboxylic acid, were selected as the solutes, and the extraction equilibrium of the acids were studied with 1-octanol, 50% tributyl phosphate （TBP） in kerosene, and 10% trialkylphosphine oxide （TRPO） in kerosene. The results showed that the degree of extraction of [1,1′-biphenyl]-2,2′-dicarboxylic acid was larger than that of trimellitic acid for all of the solvent, and the extraction capacity with TRPO is more effective than the one with TBP. The extraction behavior of aromatic polyacid is different from that of carboxylic acid, and the reactive extraction function of aromatic acids with TBP and TRPO is not as effective as that of carboxylic acid. 1-octanol could be used to remove [1,1′-biphenyl]-2,2′-dicarboxylic acid from the mixture of trimellitic acid and [1,1′-biphenyl]-2,2′-dicarboxylic acid. Because the weak hydrogen bond association exists between -OH in 1-octanol and -COOH in aromatic acid, the extractive selectivity of [ 1, 1′-biphenyl]-2,2′-dicarboxylic to trimellitic acid depends on the stoichiometric ratio.

Box-Behnken Design响应面法优化银杏叶提取物醇提水沉工艺

目的优化银杏叶提取物的醇提水沉工艺。方法在单因素试验基础上,以总黄酮醇苷转移率、萜类内酯转移率及干物质得率为综合评价指标,通过Box-Behnken Design(BBD)响应面法对液料比、提取时间、提取次数、提取液浓缩倍数、加水倍数、冷沉时间进行考察。结果醇提水沉最佳工艺为液料比8∶1(V/m),提取时间1.0 h,提取次数3次,浓缩倍数3倍,加水倍数3倍,冷沉时间28.0 h。结论BBD响应面法优化得到的银杏叶提取物醇提水沉工艺科学、合理、稳定、可行。

不同方法提取姜黄油挥发性化学成分GC-MS分析

采用同时蒸馏萃取法(SDE),选择石油醚、正己烷、乙醚3种萃取剂及纤维素酶、盐析2种辅助方式共五种方式提取姜黄油,比较不同提取方法对姜黄油挥发性化学成分的影响。利用GC-MS法鉴定姜黄油的挥发性化学成分,归一化法计算挥发性化学成分相对百分含量,并对数据进行主成分和聚类分析。结果表明:用5种提取方法共鉴定出84种化合物,其中共有化合物24种。主成分分析结果显示4种主成分可反映姜黄油挥发性化学成分的100%的信息,芳姜黄酮、姜黄酮、β-姜黄酮、β-倍半水芹烯和α-姜油烯对姜黄风味贡献最大。聚类分析结果表明,5种提取方法可分为3类即T1和T2一类,T4一类,T3和T5一类。24种化合物被聚为2类,其中α-姜油烯等5种含量最多的化合物聚为一类。不同提取方法对姜黄油的提取效果影响较显著,以纤维素酶辅助SDE提取方式和盐析辅助SDE提取方式更为明显。

Liquid-liquid extraction pretreatment samples method used for pharmacokinetic study of rhubarb in rats after oral administrated

Objective:Pretreatment of biological samples is the most critical step in pharmacokinetic studies,especially pre-treatment of plasma samples.The pretreatment of biological samples in pharmacokinetic study of Traditional Chinese Medicines (TCM) is difficult due to the complexity of the ingredients.An organic solvent system ethyl acetate:acetone (10:1) solution used for liquid-liquid extraction has been developed in this study and compared with the commonly used protein precipitation method.Methods:Rats,Beagle dogs and humans plasma samples were adopted in this study in order to demonstrate the universality of the pretreatment method.Feasibility of this pretreatment method was also verified through its application to the pharmacokinetics of rhubarb in rats.Results:According to the results of extraction recovery matrix effect,it was indicated that the liquid-liquid extraction methods with new organic solvent might be suitable for variety of structures of compounds and various types of plasma samples.The pharmacokinetic study result showed that the developed pretreatment method could successfully be used for simultaneous determination of three active compounds modin,emodin-8-O-β-D-glucopyranoside (EDG) and rhein in rat plasma with high sensitivity,accuracy,and recovery by liquid chromatography tandem mass spectrometry (LC-MS/MS).Conclusion:The pretreatment method of liquid-liquid extraction methods with new organic solvent could be successfully applied for multi-component pharmacokinetics of TCM.

Determination of 16 Species of OCPs in Water by Liquid-liquid Extraction-GC

[Objective] The research aimed to study the determination of 16 kinds of OCPs in water by liquid-liquid extraction -GC. [Method] The new method for determining 16 kinds of OCPs in water by liquid-liquid extraction -GC was established, and the influencing factors such as nitrogen pressure and water bath temperature were discussed. [ Result] Detection limit of the method was from 3.2 to 14.1 ng/L, the relative standard deviation was between 4.0% and 9.6%, and the average recovery ranged from 80.8% to 106.0%. By optimizing nitrogen pressure and water bath temperature in the sample pretreatment process, when nitrogen pressure was ＋0.087 kPa, and water bath temperature was ±36 ℃, recovery effect of this method was better. [ Conclusion] The determination method had accurate qualitative and quantitative results, and met detection requirement of 16 kinds of OCPs in water.

Separation of potassium from sodium in alkaline solution by solvent extraction with 4-tert-butyl-2-(α-methylbenzyl)phenol

This work investigated the separation of potassium from sodium in alkaline solution using substituted phenol-based extractants.Superior potassium extraction was achieved with 4-tert-butyl-2-(α-methylbenzyl)phenol(t-BAMBP)than 4-sec-butyl-2-(α-methylbenzyl)phenol(BAMBP).The optimum conditions for the extraction were 1 mol/L t-BAMBP,3:1 volumetric phase ratio(O/A),and two extraction stages.After cross-current extraction,the extraction ratio of potassium reached 90.8%.After scrubbing with deionised water at phase ratio of 4:1 and scrubbing stage of 4,a sodium scrubbing efficiency of 88.2%was obtained.After stripping using 1 mol/L H_(2)SO_(4) at phase ratio of 3:1,the stripping efficiency of potassium reached 94.2%.The potassium/sodium(K/Na)concentration ratio increased 14.3 times from 0.15 in the feed solution to 2.3 in the stripping solution.The efficient separation of potassium from sodium in alkaline solution was achieved via solvent extraction with t-BAMBP.

Controlled Synthesis of Dental Enamel-like Hydroxyapatite Whiskers via Hydrothermal Homogeneous Precipitation

Dental enamel-like hydroxyapatite whiskers with high crystallinity and homogeneous morphology were synthesized by a hydrothermal homogeneous precipitation method.The composition,crystallinity and morphology of prepared hydroxyapatite whiskers were characterized by Ⅹ-ray diffraction and scanning electron microscopy.The effects of urea and sorbitol on their morphology and composition were investigated.Homogeneous and well crystallized enamel-like hydroxyapatite whiskers with 1.17±0.08 μm in length and 84± 14 nm in width were obtained at 0.80 mol · L-1 urea and 0.26 mol · L-1 sorbitol.These hydroxyapatite whiskers may be close to nature hydroxyapatite dental enamel in terms of the morphology and composition,suggesting that they could have potential application as dental restorative materials in the field of stomatology.