Comparative Study on the Different Extraction Processes of Dietary Fiber from Sweet Potato

[Objective] To compare the extraction results of several different methods. [Method] The dietary fiber was extracted from sweet potato respectively by the sieve method, the enzymatic process and enzyme-alkali method. The extraction results of the three methods were optimized and compared. [Result] The extraction rate of dietary fiber by enzymatic method was the highest, which could reach 38% of total potato residue. The properties of dietary fiber extracted by the three methods were compared, the results indicated that the dietary fiber extracted by enzymatic method had good water-holding capacity, soil absorption and expansion. [Conclusion] The enzymatic method is the best for extracting dietary fiber from sweet potato.

Advances in Research of Extraction Processes and Anti-aging Effect of Flavonoids in Traditional Chinese Medicines

Flavonoids are secondary metabolites in plants and possess extensive pharmacological activities.Flavonoids have remarkable effect in prevent anti-tumor and cancer,but flavonoids can't be synthesized directly in the body.According to the different properties and structures of flavonoids in Traditional Chinese medicines,different extraction methods should be selected.Besides,flavonoids have good anti-aging effects.Based on three theories of modern aging,the anti-aging effect of flavonoids was discussed.It is expected to provide a beneficial reference for further development and utilization of natural flavonoid resources.

Optimization of Extraction Process for Total Flavonoids from Penthorum chinense Pursh and Comparison of Their Contents from Different Parts

[Objectives]This study was conducted to optimize the extraction process of total flavonoids from Penthorum chinense Pursh and compare their contents from different parts.[Methods]Single factor and orthogonal experiments were designed to optimize the extraction process of total flavonoids from P.chinense Pursh with the volume fraction of ethanol,the ratio of material to liquid,heating reflux extraction time and extraction times as factors,and the content of total flavonoids as the index.A verification test was carried out.The optimized extraction process was adopted to compare the contents of total flavonoids from different parts of P.chinense Pursh.[Results]The best extraction process was extracting the powder of P.chinense Pursh for 2.0 h with 20 times of 55%ethanol by reflux twice.Under this condition,the contents of total flavonoids were 3.63%,8.90%,11.28%,and 4.36%from stems,leaves,flowers and whole grass of P.chinense Pursh,respectively.[Conclusions]The process is reasonable,feasible and stable,and can effectively extract total flavonoids from P.chinense Pursh.The contents of total flavonoids from different parts of P.chinense Pursh were quite different,and the value was higher in the leaves and flowers,so the proportions of leaves and flowers should be paid attention to in the industrial processing of P.chinense Pursh.

Optimization of Polysaccharides Extraction from Physalis alkekengi L.Peel and Its Effect on the Expression of Inflammation-Related Proteins in SW620 Cells

Objective:To establish an optimized aqueous extraction process for polysaccharides from Physalis alkekengi L.peel and to preliminarily explore its in vitro anti-inflammatory activity against colorectal cancer SW620 cells.Methods:A single-factor test combined with orthogonal test analysis was used to evaluate the effects of the material-to-liquid ratio,extraction temperature,and extraction time on the yield of polysaccharides from Physalis alkekengi L.peel.The antioxidant activity of the polysaccharides was assessed by analyzing their free radical scavenging ability in vitro,and the anti-inflammatory effect was evaluated using SW620 cells.Results:The optimal extraction conditions were a material-to-liquid ratio of m(g):V(mL)=1:30,an extraction temperature of 100℃,and an extraction time of 40 minutes,with a predicted polysaccharide yield of 25.7%.The polysaccharides from Physalis peruviana peel effectively scavenged DPPH,superoxide anion,and hydroxyl radicals.After treatment with Physalis peruviana polysaccharides,the levels of IL-1β,IL-18,and TNF-αin the cell culture medium were significantly reduced,and the phosphorylation level of P65 protein in SW620 cells was decreased.Conclusion:This extraction method is stable and reliable,and the prepared Physalis alkekengi L.polysaccharides exhibit significant in vitro antioxidant and anti-inflammatory activities.This study provides a theoretical basis for developing drugs for the prevention and treatment of colorectal cancer.

Extraction Process and Quality Standard of Danshen Jianxin Capsules

[Objectives]This study was conducted to establish the quality standard of Danshen Jianxin Capsules.[Methods]Orthogonal design was adopted to optimize the water extraction process by taking the amount of water added,extraction time and extraction times as factors,and the content of tanshinone I as the index.Salviae Miltiorrhizae,Notoginseng Radix Et Rhizoma and Radix Astragali in the capsules were qualitatively identified by TLC,and the content of tanshinone I in the capsules was determined by HPLC.[Results]The best water extraction process included the steps of adding 12 times of water each time,extracting the materials twice,for 1 h each time.In TLC identification,the test samples showed spots of the same color at the positions corresponding to tanshinone II A,ginsenoside Rg1,notoginsenoside R1 and astragaloside IV reference samples.[Conclusions]Danshen Jianxin Capsules was prepared by the water extraction method,which is characterized by high efficiency and being suitable for mass production.The quality control method is reliable,fast and accurate,which can effectively control the quality of the product.

Optimization of Compound Coptis Ointment Extraction through the Integration of Pharmacodynamic Indices and Orthogonal Test

[Objectives]To determine the optimal reflux extraction process conditions for Compound Coptis Ointment.[Methods]The study employed the orthogonal experimental design method and drug-sensitive disc agar diffusion method to evaluate the extraction rate,berberine hydrochloride content,and bacteriostatic ring diameter of the extract as comprehensive indices,and optimized the extraction process conditions of Compound Coptis Ointment using ethanol reflux.[Results]Based on the results of comprehensive indices,the optimal reflux extraction conditions for Compound Coptis Ointment were determined to be soaking in 1.5 times the amount of 70%ethanol for 2 h,followed by two extractions with 6 times the amount of 70%ethanol for 1 h each time.Three verification tests were conducted under the optimal process conditions.The yield of the extract was 28.32%±0.53%,the content of berberine hydrochloride was 4.68%±0.45%,and the diameter of the bacteriostatic ring was(2.5±0.2)cm.[Conclusions]The extract had higher drug content and exhibited better antibacterial effects.The optimized extraction process is simple,stable,and reliable,and can be effectively used to optimize the extraction process of Compound Coptis Ointment.

Extraction Process of Zhuang Medicine Fumigation Lotion

[Objectives]To establish the extraction process and quality standard method of Zhuang medicine fumigation lotion.[Methods]The orthogonal design method was employed to optimize the water extraction process with the amount of water added,decocting time and extraction times as factors,and syringin content and dry extract yield as indexes.The content of syringin was determined by high performance liquid chromatography.[Results]The best water extraction process was:soaking in water for 1 h,decocting twice,added 10 times the amount of water each time,decocting for 1 h.The average content of syringin in 3 batches was 0.98 mg/g,and the average dry extract yield was 26.07%.[Conclusions]The project adopts water extraction method to prepare Zhuang medicine fumigation lotion,which has the characteristics of high efficiency and suitable for large-scale production.The quality control method is reliable,rapid and accurate,and can effectively control the quality of the lotion.

Optimization of extraction of polyphenols from pomegranate peel by orthogonal experiment design and antioxidant activity

The aim of this study was to investigate the extraction process and antioxidant activity of polyphenols from Yunnan Mengzi pomegranate peel.Single factor and orthogonal test were used as optimize the extract rate(ER)of polyphenols from pomegranate peel(PGP).The polyphenols antioxidant activity was evaluated by DPPH·,·OH and total reducing ability,and compared with that of Vc.The optimum extraction conditions of polyphenols were as follows:ethanol concentration of 50%,liquid-solid ratio of 50:1,extraction temperature of 90°C,extraction for 4 h.Under these conditions,the ER of polyphenols from GPG was 8.15%.The results showed that the scavenging effects of polyphenols and Vc on DPPH·,·OH increased with increasing concentration,and the scavenging effect of polyphenols on DPPH·was higher than Vc in rang of 0.1-1.6µg/mL.When the concentration is greater than 0.6µg/mL,the scavenging effects of plyphenols on·OH is higher than Vc.The total reducing ability of polyphenols from PGP improved with the increase of concentration,and when the concentration was 8µg/mL,the total reducing ability was 114 U/mL.

Biodiesel Production from Rhynchophorus ferrugineus Larvae Oil: Physichochemical Properties and Acid Composition of Oil as Affected by Oil Extraction Protocol

Biodiesel, a renewable energy source made from natural oils and fats, can be produced using white raffia larvae as a raw material. These larvae have a high lipid content and a short life cycle, making them suitable for this purpose. One crucial step in biodiesel production is oil extraction, and this study aimed to investigate how the extraction protocol affects the fuel properties of the oil. To study the impact of solvent type, solvent volume, and residence time on oil yield, 200 grams of Rhynchophorus ferrugineus were used in a Soxhlet extractor. The researchers examined the physicochemical properties and fatty acid composition of the crude grease using the European biodiesel standard (EN14214) and gas chromatography methods, respectively. The study found that hexane as a solvent produced the highest oil yield (64.44%) during a four-hour extraction period with a solvent ratio of 300 ml. Furthermore, the hexane-extracted oil had the highest iodine number (3.02 g/100 g) and cetane number (55.69). These values indicate favorable properties for biodiesel production. The Rhynchophorus ferrugineus larvae oil proved to be a rich source of monounsaturated fatty acids (76%), which were found to be significantly affected by the solvent type. Based on quality assessment, Rhynchophorus ferrugineus can be suitable for biodiesel production. In summary, under the given operational conditions, hexane is the most suitable solvent for Rhynchophorus ferrugineus oil extraction for biodiesel production. Further research in optimizing the extraction process can contribute to the efficient utilization of renewable energy sources like white raffia larvae for biodiesel production.

Removal of chromium(Ⅲ) from aqueous waste solution by predispersed solvent extraction

The extraction experiments of chromium（W） from aqueous waste solution by predispersed solvent extraction （PDSE） process with extractant （HEHPEHE） and its mixture, including acidic extractant （D2EHPA）, alkaline extractant （TOA） and neutral extractant （TBP） were carried out respectively. It is found that the extractant HEHPEHE exhibited high extraction selectivity to chromium（III） from aqueous waste solution. The colloidal liquid aphrons （CLAs） were successfully generated using kerosene as a solvent, HEHPEHE as an extractant, sodium dodecyl benzene sulphate （SDBS） as a surfactant in aqueous phase and polyoxyethylene sorbitol anhydride monolaurate （Tween-20） in oil phase. To study the extraction efficiency and advantages of the PDSE process in the removal of chromium（III）, the effects of major factors, such as initial chromium（III） concentration, volume of colloidal gas aphrons （CGAs）, HEHPEHE volume fraction, phase ratio （solvent phase to water phase）, mass fraction of dodecyl trimethylammonium bromide （HTAB）, mass fraction of SDBS, mass fraction of Tween-20 and initial pH of aqueous waste solution were also investigated and the appropriate process conditions were obtained. Under the appropriate conditions, the extraction efficiency of chromium（III） above 99.9 % can be achieved and the treated aqueous waste solution can be discharged directly without polluting the environment.

Study on Extraction Process of Phytoene from Tomato Paste

With tomato paste as raw material, the optimal extraction process of phy- toene from tomato paste was explored by orthogonal experiment on the basis of single-factor experiments. The results showed that the optimal extraction process for phytoene from tomato paste was as follows： extractant, acetone; solid to liquid ratio, 10：1; extraction time, 40 min; extraction temperature, 45 ℃. The developed extrac- tion process was stable, reasonable and feasible. Under the optimal extraction pro- cess, the extraction rate of phytoene reached 0.044 4%.

Extraction optimization of insecticidal compounds from Lysurus mokusin by response surface methodology

We optimized the extraction process of Lysurus mokusin(L.)Fr.insecticidal compound(LMIC)using response surface methodology with ultrasonic extraction(UE).The surface morphologies of maceration extract(ME)and UE residues were compared by scanning electron microscopy,and then the activity of LMIC on Lymantria dispar(Asian gypsy moths)larvae was determined.Results showed that the optimal condition of UE was followed by 80 min of extraction time,60%of ethanol concentration and 80 mL g^-1 of liquid–solid ratio.The surface morphologies of UE residue were looser and rougher than ME residue.The corrected mortalities of LMIC on L.dispar larvae was 59.77%.This result indicated that L.mokusin was a good candidate as pesticide for pest management.

Investigation of extraction fraction in confined impinging jet reactors for tri-butyl-phosphate extracting butyric acid process

The extraction fraction E and overall volumetric mass transfer coefficient kka of TBP extracting butyric acid pro- cess in confined impinging jet reactors （CIJR） with two jets were investigated. The main variables tested were the concentration of tri-butyl-phosphate （TBP） and butyric acid, the impinging velocity V, the impinging velocityratio of two phases Vorg/Vaq, the nozzle inner diameter di and the distance L between the jet axes and the top wall of the impinging chamber. The results showed that E and kLa increase with an increase of the impinging velocity V, the concentration ofTBP Corg, and the impinging velocity ratio Vor/Vaq. However, E and kta decrease with an increase of the inner diameter d1 from 1 to 2 mm, the concentration of butyric acid Caq from 0.5% （v/v） to 2% （v/v）. The factor L ranging from 3 to 11 mm has a negligible effect on E and kLa. A correlation on these variables and kLa was proposed based on the experimental data. These results indicated good mass transfer oerformance of CIJR in the extraction operation.

Optimization of Extraction Process of Clerodendrum philippinum Schauer var. simplex Mlodenke Total Flavonoids(CPTF) by Central Composite Design-Response Surface Methodology

[Objectives] The research aimed to optimize extraction process of Clerodendrum philippinum Schauer var. simplex Mlodenke total flavonoids( CPTF),and provide reference for its development and utilization. [Methods] Based on single-factor test,ethanol concentration,extraction temperature and extraction time were taken as independent variables,and total flavonoids yield was taken as dependent variable. The test was conducted according to central composite design principle. Multivariate linear regression and binomial equation fitting of the result were conducted,and extraction process of CPTF was optimized by using response surface methodology. [Results]The optimal extraction process of CPTF was as below: ethanol concentration 54. 76%,extraction temperature 83. 92℃,extraction time 102. 64 min,solid-liquid ratio 1:20,extraction for twice. [Conclusions] The extraction process of CPTF by central composite design-response surface methodology was simple and feasible,with reliable prediction result,which was suitable for industrial production.

Optimization of Ultrasonic-enzymatic Extraction of Total Flavonoids from Cardamine tangutorum O.E.Schulz by Response Surface Methodology and Content Determination

[Objectives]This study aimed to optimize the extraction process of total flavonoids in Cardamine tangutorum O.E.Schulz.[Methods]On the basis of single-factor experiments,the ultrasonic-enzymatic extraction process of total flavonoids in C.tangutorum O.E.Schulz was optimized by Box-Behnken design from aspects of ethanol volume fraction,extraction time,extraction temperature and enzyme addition,with yield of total flavonoids as the evaluation index.[Results]The optimal extraction process of total flavonoids in C.tangutorum O.E.Schulz was as follows:ethanol volume fraction of 70%,ultrasonic extraction time of 43 min,ultrasonic extraction temperature of 37℃and cellulose addition of 0.07 mg.Under the optimal conditions,the yield of total flavonoids from C.tangutorum O.E.Schulz reached 75.90 mg/g.[Conclusions]The optimized extraction process was reasonable and feasible,and it could provide a reference for the extraction of total flavonoids in C.tangutorum O.E.Schulz.This study provided a foundation for the quality control of food/medicinal materials and the development and research of big health products of C.tangutorum O.E.Schulz.

Optimization of the Extraction Process of Astaxanthin from Haematococcus pluvialis with Oil Dissolution Method

[ Objective ] This study aimed to optimize the extraction process of astaxanthin from Haematococcus pluvialis with oil dissolution method. [ Method ] Small amounts of acetone or ethanol were separately added into soybean oil for astaxanthin extraction. The extraction efficiency of astaxanthin from H. pluvialis with different methods was compared. [ Result] The extraction efficiency of astaxanthin from H. pluvialis with acetone, acetone ＋ soybean oil, ethanol ＋ soybean oil, soybean oil was 20.46, 21.65, 20.85 mg/g and 13.05 mg/g, respectively. According to the results, acetone ＋ soybean oil led to the highest extraction rate, which was approximately twice that of soybean oil and higher than that of acetone. [ Conclusion ] This study laid the foundation for large-scale production of astaxanthin.

Research Progress of Value, Extraction and Applicationof Silkworm Chrysalis Protein

Silkworm chrysalis protein is a high quality pure natural complete animal protein with high utilization value, and it has been widely usedin many industries in recent years. The nutrition, health care and medicinal value of silkworm chrysalis protein, the degreasing, deodorization anddecoloration extraction process, and its application in food, medicine, feed, etc. are summarized, in order to provide the reference for further development and industrial production of silkworm chrysalis protein.

A novel hydrothermal method for zinc extraction and separation from zinc ferrite and electric arc furnace dust

A novel hydrothermal process was developed to extract zinc from pure zinc ferrite（ZnFe2O4） nanopowder and zinc-containing electric arc furnace（EAF） dust using hexahydrated ferric chloride（FeCl3-6H2O） as a decomposing agent.The effects of solid FeCl3-6H2O to ZnFe2O4 ratio by mass（RF/Z）,hydrothermal reaction temperature,and time on zinc extraction were systematically investigated.In the results,when the hydrothermal reaction is conducted at 150℃ for 2 h with RF/Z of 15：20,the efficiency of zinc extraction from ZnFe2O4 reaches97.2%,and the concentration of ferric ions（Fe^3＋） in the leaching solution is nearly zero,indicating a high selectivity for zinc.In addition,the zinc extraction efficiency from the EAF dust reaches 94.5%in the case of the hydrothermal reaction performed at 200℃ for 10 h with the solid FeCl3-6H2O to EAF dust ratio by mass（RF/EAF dust） of 15：10.Zinc and iron separation is achieved by adjusting the pH value of the leaching solution according to the different precipitation pH values of metal hydroxides.

Feature extraction of wood-hole defects using wavelet-based ultrasonic testing

The primary bottleneck to extracting wood defects during ultrasonic testing is the accuracy of identifying the wood defects. The wavelet energy moment was used to extract defect features of artificial wood holes drilled into 120 elm samples that differed in the number of holes to verify the validity of the method. Wavelet energy moment can reflect the distribution of energy along the time axis and the amount of energy in each frequency band,which can effectively extract the energy distribution characteristics of signals in each frequency band; therefore,wavelet energy moment can replace the wavelet frequency band energy and constitute wood defect feature vectors. A principal component analysis was used to normalize and reduce the dimension of the feature vectors. A total of 16 principal component features were then obtained, which can effectively extract the defect features of the different number of holes in the elm samples.

Optimization of Quality Control Method and Ethanol Extraction Process of Psoralen and Bergapten in Ficus pandurata

[Objectives]To establish a qualitative identification and content determination method for psoralen and bergapten in the roots and leaves of Ficus pandurata,and the multi-indicator scoring method to optimize the ethanol extraction process for the effective parts of F.pandurata.[Methods]Qualitative identification was carried out by thin-layer chromatography(TLC)and content determination was made by high-performance liquid chromatography(HPLC);the content of psoralen and bergapten and extract yield were used as indicators,to investigate the effects of ethanol volume fraction,solid-to-liquid ratio,extraction time and extraction times on the ethanol extraction process of F.pandurata;multi-indicator scoring method was adopted,orthogonal test method was designed to optimize the extraction process,and verification test was performed.[Results]TLC chart of F.pandurata shows clear spots and good separation;the detected concentrations of psoralen and bergapten in the roots are in the range of 1.02-32.64μg/mL and shows a good linear relationship with the peak area(r=0.9997);these components have not been detected in the leaves,and the precision,RSD of stability and repeatability test is less than 2%;the average recovery rate was 99.8%-100.2%,and the RSD value is 1.12%-1.13%(n=6);the optimized extraction process is to use 50%ethanol as the extraction solvent,the solid-to-liquid ratio of 1∶10,reflux extraction of 3 times,and 1.5 h each time;the results of the three batches of verification tests show that the content of the two indicator components obtained is high,and the average value of the total amount is 0.34 mg/g(RSD=0.30%,n=3).[Conclusions]The established quality control method for F.pandurata is simple,easy,accurate and reproducible;the preferred extraction process is stable and feasible,suitable for the extraction and purification of coumarin effective parts in F.pandurata roots,so it is expected to provide references for further development of F.pandurata.