[Objectives]This study was conducted to optimize the extraction process of total flavonoids from Penthorum chinense Pursh and compare their contents from different parts.[Methods]Single factor and orthogonal experimen...[Objectives]This study was conducted to optimize the extraction process of total flavonoids from Penthorum chinense Pursh and compare their contents from different parts.[Methods]Single factor and orthogonal experiments were designed to optimize the extraction process of total flavonoids from P.chinense Pursh with the volume fraction of ethanol,the ratio of material to liquid,heating reflux extraction time and extraction times as factors,and the content of total flavonoids as the index.A verification test was carried out.The optimized extraction process was adopted to compare the contents of total flavonoids from different parts of P.chinense Pursh.[Results]The best extraction process was extracting the powder of P.chinense Pursh for 2.0 h with 20 times of 55%ethanol by reflux twice.Under this condition,the contents of total flavonoids were 3.63%,8.90%,11.28%,and 4.36%from stems,leaves,flowers and whole grass of P.chinense Pursh,respectively.[Conclusions]The process is reasonable,feasible and stable,and can effectively extract total flavonoids from P.chinense Pursh.The contents of total flavonoids from different parts of P.chinense Pursh were quite different,and the value was higher in the leaves and flowers,so the proportions of leaves and flowers should be paid attention to in the industrial processing of P.chinense Pursh.展开更多
[Objectives]This study was conducted to establish the quality standard of Danshen Jianxin Capsules.[Methods]Orthogonal design was adopted to optimize the water extraction process by taking the amount of water added,ex...[Objectives]This study was conducted to establish the quality standard of Danshen Jianxin Capsules.[Methods]Orthogonal design was adopted to optimize the water extraction process by taking the amount of water added,extraction time and extraction times as factors,and the content of tanshinone I as the index.Salviae Miltiorrhizae,Notoginseng Radix Et Rhizoma and Radix Astragali in the capsules were qualitatively identified by TLC,and the content of tanshinone I in the capsules was determined by HPLC.[Results]The best water extraction process included the steps of adding 12 times of water each time,extracting the materials twice,for 1 h each time.In TLC identification,the test samples showed spots of the same color at the positions corresponding to tanshinone II A,ginsenoside Rg1,notoginsenoside R1 and astragaloside IV reference samples.[Conclusions]Danshen Jianxin Capsules was prepared by the water extraction method,which is characterized by high efficiency and being suitable for mass production.The quality control method is reliable,fast and accurate,which can effectively control the quality of the product.展开更多
[Objectives]To establish the extraction process and quality standard method of Zhuang medicine fumigation lotion.[Methods]The orthogonal design method was employed to optimize the water extraction process with the amo...[Objectives]To establish the extraction process and quality standard method of Zhuang medicine fumigation lotion.[Methods]The orthogonal design method was employed to optimize the water extraction process with the amount of water added,decocting time and extraction times as factors,and syringin content and dry extract yield as indexes.The content of syringin was determined by high performance liquid chromatography.[Results]The best water extraction process was:soaking in water for 1 h,decocting twice,added 10 times the amount of water each time,decocting for 1 h.The average content of syringin in 3 batches was 0.98 mg/g,and the average dry extract yield was 26.07%.[Conclusions]The project adopts water extraction method to prepare Zhuang medicine fumigation lotion,which has the characteristics of high efficiency and suitable for large-scale production.The quality control method is reliable,rapid and accurate,and can effectively control the quality of the lotion.展开更多
[Objectives] The research aimed to optimize extraction process of Clerodendrum philippinum Schauer var. simplex Mlodenke total flavonoids( CPTF),and provide reference for its development and utilization. [Methods] Bas...[Objectives] The research aimed to optimize extraction process of Clerodendrum philippinum Schauer var. simplex Mlodenke total flavonoids( CPTF),and provide reference for its development and utilization. [Methods] Based on single-factor test,ethanol concentration,extraction temperature and extraction time were taken as independent variables,and total flavonoids yield was taken as dependent variable. The test was conducted according to central composite design principle. Multivariate linear regression and binomial equation fitting of the result were conducted,and extraction process of CPTF was optimized by using response surface methodology. [Results]The optimal extraction process of CPTF was as below: ethanol concentration 54. 76%,extraction temperature 83. 92℃,extraction time 102. 64 min,solid-liquid ratio 1:20,extraction for twice. [Conclusions] The extraction process of CPTF by central composite design-response surface methodology was simple and feasible,with reliable prediction result,which was suitable for industrial production.展开更多
[ Objective ] This study aimed to optimize the extraction process of astaxanthin from Haematococcus pluvialis with oil dissolution method. [ Method ] Small amounts of acetone or ethanol were separately added into soyb...[ Objective ] This study aimed to optimize the extraction process of astaxanthin from Haematococcus pluvialis with oil dissolution method. [ Method ] Small amounts of acetone or ethanol were separately added into soybean oil for astaxanthin extraction. The extraction efficiency of astaxanthin from H. pluvialis with different methods was compared. [ Result] The extraction efficiency of astaxanthin from H. pluvialis with acetone, acetone + soybean oil, ethanol + soybean oil, soybean oil was 20.46, 21.65, 20.85 mg/g and 13.05 mg/g, respectively. According to the results, acetone + soybean oil led to the highest extraction rate, which was approximately twice that of soybean oil and higher than that of acetone. [ Conclusion ] This study laid the foundation for large-scale production of astaxanthin.展开更多
With quercetin content and yield of dry extract as investigation indices, three factors, amount of water added, decoction time and decoction times were investigated by an orthogonal test, so as to select the optimal w...With quercetin content and yield of dry extract as investigation indices, three factors, amount of water added, decoction time and decoction times were investigated by an orthogonal test, so as to select the optimal water extraction process for Zihua Qinghuo Capsule. The determined extraction process was adding 8 times of water in five herbs including Viola philippica and decocting for 2 times, 1.5 h each time. Pilot scale test demonstrated that the selected process is stable and feasible, and could provide reliable reference for practical production.展开更多
[Objectives]To establish a qualitative identification and content determination method for psoralen and bergapten in the roots and leaves of Ficus pandurata,and the multi-indicator scoring method to optimize the ethan...[Objectives]To establish a qualitative identification and content determination method for psoralen and bergapten in the roots and leaves of Ficus pandurata,and the multi-indicator scoring method to optimize the ethanol extraction process for the effective parts of F.pandurata.[Methods]Qualitative identification was carried out by thin-layer chromatography(TLC)and content determination was made by high-performance liquid chromatography(HPLC);the content of psoralen and bergapten and extract yield were used as indicators,to investigate the effects of ethanol volume fraction,solid-to-liquid ratio,extraction time and extraction times on the ethanol extraction process of F.pandurata;multi-indicator scoring method was adopted,orthogonal test method was designed to optimize the extraction process,and verification test was performed.[Results]TLC chart of F.pandurata shows clear spots and good separation;the detected concentrations of psoralen and bergapten in the roots are in the range of 1.02-32.64μg/mL and shows a good linear relationship with the peak area(r=0.9997);these components have not been detected in the leaves,and the precision,RSD of stability and repeatability test is less than 2%;the average recovery rate was 99.8%-100.2%,and the RSD value is 1.12%-1.13%(n=6);the optimized extraction process is to use 50%ethanol as the extraction solvent,the solid-to-liquid ratio of 1∶10,reflux extraction of 3 times,and 1.5 h each time;the results of the three batches of verification tests show that the content of the two indicator components obtained is high,and the average value of the total amount is 0.34 mg/g(RSD=0.30%,n=3).[Conclusions]The established quality control method for F.pandurata is simple,easy,accurate and reproducible;the preferred extraction process is stable and feasible,suitable for the extraction and purification of coumarin effective parts in F.pandurata roots,so it is expected to provide references for further development of F.pandurata.展开更多
[Objectives] To establish a method for determining the content of Laggera alata( D. Don) Sch. Bip. Ex Oliv. using caffeic acid the target component,and to compare the content of caffeic acid in the medicinal materials...[Objectives] To establish a method for determining the content of Laggera alata( D. Don) Sch. Bip. Ex Oliv. using caffeic acid the target component,and to compare the content of caffeic acid in the medicinal materials of L. alata in different production areas of Guangxi.[Methods]The content was determined by Inertsil~ODS-3 chromatographic column C_(18)( 4. 60 mm × 250 mm,5 μm,mobile phase: acetonitrile-0. 1% phosphoric acid( 22∶ 78),detection wavelength: 320 nm,flow rate: 1. 0 m L/min,column temperature: 30℃,and injection volume: 10 μL. [Results] The caffeic acid showed a good linear relationship in the range of injection volume of 0. 025 92-0. 259 2 μg( R =0. 999 5). The average recovery rate was 98. 33%( RSD = 1. 85%). L. alata in different production areas of Guangxi contained the caffeic acid,and there was a great difference in the caffeic acid. L. alata in Baise had the highest content of caffeic acid,while that in Guilin had the lowest content of caffeic acid. [Conclusions]This method can accurately determine the content of caffeic acid and is expected provide a scientific basis for the development and utilization of herbal medicine L. alata.展开更多
[Objectives]To optimize the ultrasonic-assisted extraction process for total flavonoids in Primula sikkimensis Hook.[Methods]The effects of ethanol volume fraction,extraction time,extraction temperature,ultrasonic tim...[Objectives]To optimize the ultrasonic-assisted extraction process for total flavonoids in Primula sikkimensis Hook.[Methods]The effects of ethanol volume fraction,extraction time,extraction temperature,ultrasonic time and solid-to-liquid ratio on the yield of total flavonoids were investigated by single factor method,and the extraction process for total flavonoids in P.sikkimensis was optimized by Box-Behnken experimental design.[Results]The optimal extraction process for total flavonoids in P.sikkimensis was ethanol volume fraction 45%,extraction time 29 min,extraction temperature 80℃,solid-to-liquid 1∶40(g/mL)and ultrasonic time 10 min.Under such conditions,the average yield of total flavonoids in P.sikkimensis was 3.09%.[Conclusions]The optimized extraction process is simple and feasible,and is expected to provide a reference for the extraction of total flavonoids in P.sikkimensis.展开更多
[Objectives]This paper aims to establish thin-layer identification and content determination method for Laggera alata(D.Don)Sch.Bip.ex Oliv.with chlorogenic acid as the index component and compare the content of chlor...[Objectives]This paper aims to establish thin-layer identification and content determination method for Laggera alata(D.Don)Sch.Bip.ex Oliv.with chlorogenic acid as the index component and compare the content of chlorogenic acid in L.alata from different places in Guangxi.[Methods]Silica gel GF254 thin-layer plate was used for identification under an ultraviolet lamp(365 nm),with butyl acetate-formic acid-water(V∶V∶V=7∶2.5∶2.5)as a developing agent.The content of chlorogenic acid was determined under the following chromatographic conditions:column,Inertsil ODS-3 C18 column(4.60 mm×250 mm,5μm);mobile phase,methanol-0.1%phosphoric acid(28∶72);detection wavelength,329 nm;flow rate,1.0 mL/min;column temperature,25℃;and injection volume,10μL.[Results]Chlorogenic acid can be detected by thin layer chromatography with clear spot and good specificity.Chlorogenic acid showed a good linear relationship in the injection amount range of 0.099-0.99μg(R^(2)=0.9999).The content of chlorogenic acid in L.alata varied greatly among the 10 different producing areas in Guangxi.L.alata produced in Dee Township,Longlin,Baise,Guangxi showed the highest chlorogenic acid content,and that produced in Shangsi County and Pingle County showed the lowest chlorogenic acid content.[Conclusions]This method can effectively identify L.alata and accurately determine the content of chlorogenic acid,thereby providing a scientific basis for the development and utilization of L.alata resources.展开更多
Objective:To optimize the extraction process of total flavones in Trichosanthis Fructus(composed of Trichosanthis pericarpium and Trichosanthis semen in certain proportion).Methods:The effects of the mixture ratio of ...Objective:To optimize the extraction process of total flavones in Trichosanthis Fructus(composed of Trichosanthis pericarpium and Trichosanthis semen in certain proportion).Methods:The effects of the mixture ratio of Trichosanthis pericarpium and Trichosanthis semen,ethanol concentration,ultrasonic extraction time and extraction temperature on the extraction rate of total flavonoids in Trichosanthis Fructus were investigated.The extraction process of total flavonoids in Trichosanthis Fructus was optimized by Box-Behnken response surface method combined with differential spectrophotometry.Results:The optimum extraction conditions of total flavonoids in Trichosanthis Fructus were as follows:The mixture ratio of Trichosanthis pericarpium and Trichosanthis semen was 4:6,the ethanol concentration was 70%,the ultrasonic extraction time was 60min and the extraction temperature was 40℃.Conclusion:Box-Behnken response surface method combined with differential spectrophotometry can optimize the extraction process of total flavonoids from Trichosanthis Fructus,which can provide reference for the extraction and application of total flavonoids in Trichosanthis Fructus.展开更多
[Objectives]To optimize the extraction process of total flavonoids of Lonicerae japonica and establish a method for its extraction and content determination.[Methods]The total flavonoids of L.japonica were extracted b...[Objectives]To optimize the extraction process of total flavonoids of Lonicerae japonica and establish a method for its extraction and content determination.[Methods]The total flavonoids of L.japonica were extracted by reflux extraction method.Through a single factor experiment,the effects of extraction method,extraction solvent concentration,extraction volume and extraction time on the total flavonoids content of medicinal materials were investigated to select the optimal extraction process of the total flavonoids of L.japonica.[Results]The optimal extraction process of the total flavonoids of L.japonica was 70%ethanol,1∶30 of solid-to-liquid ratio,and 1.0 h of reflux extraction time.[Conclusions]This method can effectively determine the content of total flavonoids in L.japonica and is expected to provide a certain scientific basis for the study of the quality standard of L.japonica.This method has high reproducibility.It is stable and feasible in extraction of total flavonoids from L.japonica.展开更多
[Objectives]Taking chlorogenic acid as index component,TLC and content determination method of Laggerae Alatae Herba were established.[Methods]TLC identification used silica gel G thin-layer plate,and butyl acetate∶f...[Objectives]Taking chlorogenic acid as index component,TLC and content determination method of Laggerae Alatae Herba were established.[Methods]TLC identification used silica gel G thin-layer plate,and butyl acetate∶formic acid∶water(7∶2.5∶2.5)was taken as developing agent,and it was inspected under ultraviolet lamp(365 nm).The content was determined by chromatographic column Inertsil ODS-3 C_(18)(4.60 mm×250 mm,5μm).Mobile phase:methanol-0.1%phosphoric acid(28∶72);detection wavelength:329 nm;flow speed:1.0 mL/min;column temperature:25℃;injection volume:10μL.[Results]Chlorogenic acid can be detected by TLC,with clear spots and good specificity.When injection volume of chlorogenic acid was between 0.099 and 0.990μg(R^(2)=0.9999),there was good linear relationship.In low,medium and high sample adding groups of Laggerae Alatae Herba,average recovery rates of chlorogenic acids were 98.80%(RSD=2.09%),98.24%(RSD=1.96%)and 99.65%(RSD=2.15%).[Conclusions]The method could effectively identify medicinal material Laggerae Alatae Herba,and accurately measure the content of chlorogenic acid in Laggerae Alatae Herba,thereby providing a scientific basis for developing and using medicinal resources of Laggerae Alatae Herba.展开更多
[Objectives]To optimize the extraction process of total flavonoids from Eucommiae Cortex,establish the extraction and content determination methods of its medicinal materials,and study its in vitro antioxidant activit...[Objectives]To optimize the extraction process of total flavonoids from Eucommiae Cortex,establish the extraction and content determination methods of its medicinal materials,and study its in vitro antioxidant activity.[Methods]The total flavonoids from Eucommiae Cortex were extracted by reflux extraction method,and the effects of extraction method,extraction solvent concentration,extraction volume,and extraction time on the total flavonoids content of the medicinal materials were explored through the single factor experiment.Orthogonal experiment was carried out to optimize the extraction process conditions,and the optimal extraction process for total flavonoids from Eucommiae Cortex was screened out.The total antioxidant capacity index was used to determine the free radical scavenging ability of the total flavonoids from Eucommiae Cortex.[Results]The optimal extraction process of total flavonoids from Eucommiae Cortex was 50%ethanol,1∶40 solid-to-liquid-ratio,and 1.5 h reflux extraction time.Through the antioxidant experiment in vitro,it is found that the total flavonoids from Eucommiae Cortex have a higher scavenging ability for the total antioxidant capacity,and there is a certain positive correlation with the mass concentration of total flavonoids.[Conclusions]This method can effectively determine the total flavonoids content of Eucommiae Cortex medicinal material,and provide a certain scientific basis for the quality standard research of the medicinal material.The total flavonoids from Eucommiae Cortex have good in vitro antioxidant activity.And the method for extracting total flavonoids from Eucommiae Cortex medicinal material in this experiment has good repeatability,high stability and feasibility.展开更多
Flavonoids are secondary metabolites in plants and possess extensive pharmacological activities.Flavonoids have remarkable effect in prevent anti-tumor and cancer,but flavonoids can't be synthesized directly in th...Flavonoids are secondary metabolites in plants and possess extensive pharmacological activities.Flavonoids have remarkable effect in prevent anti-tumor and cancer,but flavonoids can't be synthesized directly in the body.According to the different properties and structures of flavonoids in Traditional Chinese medicines,different extraction methods should be selected.Besides,flavonoids have good anti-aging effects.Based on three theories of modern aging,the anti-aging effect of flavonoids was discussed.It is expected to provide a beneficial reference for further development and utilization of natural flavonoid resources.展开更多
[Objectives]This study was conducted to optimize the extraction process of rutin in Flos Sophorae.[Methods]With the percentage content of rutin extracted from Flos Sophorae as the evaluation index and rutin as the ref...[Objectives]This study was conducted to optimize the extraction process of rutin in Flos Sophorae.[Methods]With the percentage content of rutin extracted from Flos Sophorae as the evaluation index and rutin as the reference substance,the content of rutin in Flos Sophorae extracted ultrasonically was determined by high performance liquid chromatography.L_(9)(3^(4))orthogonal experiments were carried out to optimize the three factors(solvent concentration,material-to-liquid ratio,extraction time)that affect the effect of ultrasonic extraction of rutin from Flos Sophorae.[Results]The extraction effect of the crude medicinal powder was best with the methanol concentration of 80%,the ratio of material to liquid at 0.1∶30,and the extraction time of 40 min.[Conclusions]This study provides a reference for optimizing the extraction process of rutin in Flos Sophorae.展开更多
[Objectives]To optimize the extraction process of polysaccharides from Actinidia arguta(Sieb.&Zucc.)Planch.ex Miq.[Methods]On the basis of single-factor tests,an orthogonal test was conducted with solid/liquid rat...[Objectives]To optimize the extraction process of polysaccharides from Actinidia arguta(Sieb.&Zucc.)Planch.ex Miq.[Methods]On the basis of single-factor tests,an orthogonal test was conducted with solid/liquid ratio,ultrasonic temperature,ultrasonic time and ultrasonic power as influencing factors.[Results]The optimal extraction process was as follows:solid/liquid ratio 1∶15(g/mL),ultrasonic temperature 50℃,ultrasonic time 50 min and ultrasonic power 90 W.Under the optimal extraction conditions,the extraction rate of polysaccharides reached 2.05%.[Conclusions]The method is simple and feasible,and can be used to optimize the extraction process of polysaccharides in A.arguta,in order to provide a theoretical basis for the further development and utilization of related resources.展开更多
Comprehensive Summary Cathode interlayers(CILs)play an essential role in achieving efficient organic solar cells(OSCs).However,the electronic structure at the electrode/CIL/active layer interfaces and the underlying m...Comprehensive Summary Cathode interlayers(CILs)play an essential role in achieving efficient organic solar cells(OSCs).However,the electronic structure at the electrode/CIL/active layer interfaces and the underlying mechanisms for electron collection remain unclear,which becomes a major obstacle to develop high-performance CILs.Herein,we investigate the relationship of the electron collection abilities of four cross-linked and n-doped CILs(c-NDI:P0,c-NDI:P1,c-NDI:P2,c-NDI:P3)with their electronic structure of space charge region at heterojunction interface.By accurately calculating the depletion region width according to the barrier height,doping density and permittivity,we put forward that the optimal thickness of CIL should be consistent with the depletion region width to realize the minimum energy loss.As a result,the depletion region width is largely reduced from 13 nm to 0.8 nm at the indium tin oxide(ITO)/c-NDI:P0 interface,resulting in a decent PCE of 17.7%for the corresponding inverted OSCs.展开更多
Almost 29.57–38.46 million tons of zinc-bearing dust were produced in Chinese iron and steel enterprises annually.The recovery of Zn and other metals in zinc-bearing dust from ironmaking and steelmaking could improve...Almost 29.57–38.46 million tons of zinc-bearing dust were produced in Chinese iron and steel enterprises annually.The recovery of Zn and other metals in zinc-bearing dust from ironmaking and steelmaking could improve economic efficiency.However,zinc-bearing dust was classified as hazardous waste,and the volatile metals(like Zn,Na,Pb,etc.)in zinc-bearing dust limited the direct reusing in a blast furnace.Therefore,the formation process,fundamental characteristics,and current extraction process of Zn from zinc-bearing dust,associated with thermodynamics and kinetics of the pyrometallurgical process,hydrometallurgical process,and pyro-hydrometallurgical process,were analyzed.It is indicated that industrialized pyrometallurgical processes are undergoing high energy consumption and pollution such as rotary kiln and rotary hearth furnace process.The vacuum carbothermal reduction process can realize low carbon emission and no waste produced in the process.The hydrometallurgical leaching processes in strong acid,strong alkali,and ammonium solutions result in serious liquid pollution and equipment corrosion.The pyrometallurgical process involves complex kinetics and lacks kinetic research on semi-industrialization and industrialization.Water-soluble components in zinc-bearing dust can be removed by water leaching.The kinetics of the strong acid leaching is mainly controlled by the leaching kinetics of Fe_(2)O_(3) and ZnFe_(2)O_(4),while the alkali leaching and weak acid leaching are controlled by the kinetics of ZnO leaching.Zn in the zincbearing dust can be extracted by a low-temperature sodium roasting–weak acid leaching process that reduces equipment corrosion and environmental pollution.展开更多
[Objectives]To determine the optimal reflux extraction process conditions for Compound Coptis Ointment.[Methods]The study employed the orthogonal experimental design method and drug-sensitive disc agar diffusion metho...[Objectives]To determine the optimal reflux extraction process conditions for Compound Coptis Ointment.[Methods]The study employed the orthogonal experimental design method and drug-sensitive disc agar diffusion method to evaluate the extraction rate,berberine hydrochloride content,and bacteriostatic ring diameter of the extract as comprehensive indices,and optimized the extraction process conditions of Compound Coptis Ointment using ethanol reflux.[Results]Based on the results of comprehensive indices,the optimal reflux extraction conditions for Compound Coptis Ointment were determined to be soaking in 1.5 times the amount of 70%ethanol for 2 h,followed by two extractions with 6 times the amount of 70%ethanol for 1 h each time.Three verification tests were conducted under the optimal process conditions.The yield of the extract was 28.32%±0.53%,the content of berberine hydrochloride was 4.68%±0.45%,and the diameter of the bacteriostatic ring was(2.5±0.2)cm.[Conclusions]The extract had higher drug content and exhibited better antibacterial effects.The optimized extraction process is simple,stable,and reliable,and can be effectively used to optimize the extraction process of Compound Coptis Ointment.展开更多
基金Supported by Key Research and Development Program of Sichuan Province(2022YFS0436)Natural Science Foundation of Sichuan Province(2022NSFSC1738)+4 种基金Science and Technology Planning Project of Luzhou City(2021-JYJ-109,2023SYF120)Special Project of Traditional Chinese Medicine Scientific Research of Sichuan Provincial Administration of Traditional Chinese Medicine(2020CP0029)Southwest Medical University-Luzhou Hospital of Traditional Chinese Medicine Base Project(2019-LH003)Open Subject of Luzhou Key Laboratory of Fine Chemical Application Technology(HYJY-2106-B)Southwest Medical University Undergraduate Student Innovation and Entrepreneurship Training Program(202310632074).
文摘[Objectives]This study was conducted to optimize the extraction process of total flavonoids from Penthorum chinense Pursh and compare their contents from different parts.[Methods]Single factor and orthogonal experiments were designed to optimize the extraction process of total flavonoids from P.chinense Pursh with the volume fraction of ethanol,the ratio of material to liquid,heating reflux extraction time and extraction times as factors,and the content of total flavonoids as the index.A verification test was carried out.The optimized extraction process was adopted to compare the contents of total flavonoids from different parts of P.chinense Pursh.[Results]The best extraction process was extracting the powder of P.chinense Pursh for 2.0 h with 20 times of 55%ethanol by reflux twice.Under this condition,the contents of total flavonoids were 3.63%,8.90%,11.28%,and 4.36%from stems,leaves,flowers and whole grass of P.chinense Pursh,respectively.[Conclusions]The process is reasonable,feasible and stable,and can effectively extract total flavonoids from P.chinense Pursh.The contents of total flavonoids from different parts of P.chinense Pursh were quite different,and the value was higher in the leaves and flowers,so the proportions of leaves and flowers should be paid attention to in the industrial processing of P.chinense Pursh.
基金Supported by Self-financed Scientific Research Project of Administration of Traditional Chinese Medicine of Guangxi Zhuang Autonomous Region(GXZYZ20210290)The First Batch of High-level Talent Research Project of Affiliated Hospital of Youjiang Medical University for Nationalities in 2019(Y20196311)Basic Scientific Research Ability Improvement Project for Young and Middle-aged Teachers in Guangxi Universities in 2020(2020KY13034).
文摘[Objectives]This study was conducted to establish the quality standard of Danshen Jianxin Capsules.[Methods]Orthogonal design was adopted to optimize the water extraction process by taking the amount of water added,extraction time and extraction times as factors,and the content of tanshinone I as the index.Salviae Miltiorrhizae,Notoginseng Radix Et Rhizoma and Radix Astragali in the capsules were qualitatively identified by TLC,and the content of tanshinone I in the capsules was determined by HPLC.[Results]The best water extraction process included the steps of adding 12 times of water each time,extracting the materials twice,for 1 h each time.In TLC identification,the test samples showed spots of the same color at the positions corresponding to tanshinone II A,ginsenoside Rg1,notoginsenoside R1 and astragaloside IV reference samples.[Conclusions]Danshen Jianxin Capsules was prepared by the water extraction method,which is characterized by high efficiency and being suitable for mass production.The quality control method is reliable,fast and accurate,which can effectively control the quality of the product.
基金Supported by Key Research and Development Project of Guangxi Provincial Department of Science and Technology(GK AB21196057)Self-funded Research Project of Administration of Traditional Chinese Medicine of Guangxi Zhuang Autonomous Region(GXZYZ20210193,GXZYA20230157)+4 种基金High-level TCM Key Discipline(Zhuang Medical Science)Construction Project of State Administration of Traditional Chinese Medicine(GZYYRJH[2022]226)Guangxi TCM Interdisciplinary Innovation Team Project(GZKJ2309)"Green Seedling Project"Talent Cultivation Program of Guangxi International Zhuang Medical Hospital(2022001)Science and Technology Plan Project of Liangqing District(202202)"High-level Talent Cultivation Innovation Team"Funding Project of Guangxi University of Chinese Medicine(2022A008).
文摘[Objectives]To establish the extraction process and quality standard method of Zhuang medicine fumigation lotion.[Methods]The orthogonal design method was employed to optimize the water extraction process with the amount of water added,decocting time and extraction times as factors,and syringin content and dry extract yield as indexes.The content of syringin was determined by high performance liquid chromatography.[Results]The best water extraction process was:soaking in water for 1 h,decocting twice,added 10 times the amount of water each time,decocting for 1 h.The average content of syringin in 3 batches was 0.98 mg/g,and the average dry extract yield was 26.07%.[Conclusions]The project adopts water extraction method to prepare Zhuang medicine fumigation lotion,which has the characteristics of high efficiency and suitable for large-scale production.The quality control method is reliable,rapid and accurate,and can effectively control the quality of the lotion.
基金Supported by Special Item for Guangxi Bagui Scholars(Guicaijiaohan [2017]143)
文摘[Objectives] The research aimed to optimize extraction process of Clerodendrum philippinum Schauer var. simplex Mlodenke total flavonoids( CPTF),and provide reference for its development and utilization. [Methods] Based on single-factor test,ethanol concentration,extraction temperature and extraction time were taken as independent variables,and total flavonoids yield was taken as dependent variable. The test was conducted according to central composite design principle. Multivariate linear regression and binomial equation fitting of the result were conducted,and extraction process of CPTF was optimized by using response surface methodology. [Results]The optimal extraction process of CPTF was as below: ethanol concentration 54. 76%,extraction temperature 83. 92℃,extraction time 102. 64 min,solid-liquid ratio 1:20,extraction for twice. [Conclusions] The extraction process of CPTF by central composite design-response surface methodology was simple and feasible,with reliable prediction result,which was suitable for industrial production.
基金Supported by Project of Yantai Huarong Biological Technology Co.,Ltd
文摘[ Objective ] This study aimed to optimize the extraction process of astaxanthin from Haematococcus pluvialis with oil dissolution method. [ Method ] Small amounts of acetone or ethanol were separately added into soybean oil for astaxanthin extraction. The extraction efficiency of astaxanthin from H. pluvialis with different methods was compared. [ Result] The extraction efficiency of astaxanthin from H. pluvialis with acetone, acetone + soybean oil, ethanol + soybean oil, soybean oil was 20.46, 21.65, 20.85 mg/g and 13.05 mg/g, respectively. According to the results, acetone + soybean oil led to the highest extraction rate, which was approximately twice that of soybean oil and higher than that of acetone. [ Conclusion ] This study laid the foundation for large-scale production of astaxanthin.
基金Supported by Guiyang Science and Technology Planning Project(ZKHT[2017-4]21)
文摘With quercetin content and yield of dry extract as investigation indices, three factors, amount of water added, decoction time and decoction times were investigated by an orthogonal test, so as to select the optimal water extraction process for Zihua Qinghuo Capsule. The determined extraction process was adding 8 times of water in five herbs including Viola philippica and decocting for 2 times, 1.5 h each time. Pilot scale test demonstrated that the selected process is stable and feasible, and could provide reliable reference for practical production.
基金Major Medical and Health Project of Science and Technology Plan of Zhongshan City,Guangdong Province(2017B1006)Project of Traditional Chinese Medicine Bureau of Guangdong Province(20182168).
文摘[Objectives]To establish a qualitative identification and content determination method for psoralen and bergapten in the roots and leaves of Ficus pandurata,and the multi-indicator scoring method to optimize the ethanol extraction process for the effective parts of F.pandurata.[Methods]Qualitative identification was carried out by thin-layer chromatography(TLC)and content determination was made by high-performance liquid chromatography(HPLC);the content of psoralen and bergapten and extract yield were used as indicators,to investigate the effects of ethanol volume fraction,solid-to-liquid ratio,extraction time and extraction times on the ethanol extraction process of F.pandurata;multi-indicator scoring method was adopted,orthogonal test method was designed to optimize the extraction process,and verification test was performed.[Results]TLC chart of F.pandurata shows clear spots and good separation;the detected concentrations of psoralen and bergapten in the roots are in the range of 1.02-32.64μg/mL and shows a good linear relationship with the peak area(r=0.9997);these components have not been detected in the leaves,and the precision,RSD of stability and repeatability test is less than 2%;the average recovery rate was 99.8%-100.2%,and the RSD value is 1.12%-1.13%(n=6);the optimized extraction process is to use 50%ethanol as the extraction solvent,the solid-to-liquid ratio of 1∶10,reflux extraction of 3 times,and 1.5 h each time;the results of the three batches of verification tests show that the content of the two indicator components obtained is high,and the average value of the total amount is 0.34 mg/g(RSD=0.30%,n=3).[Conclusions]The established quality control method for F.pandurata is simple,easy,accurate and reproducible;the preferred extraction process is stable and feasible,suitable for the extraction and purification of coumarin effective parts in F.pandurata roots,so it is expected to provide references for further development of F.pandurata.
基金Supported by Project of National Natural Science Foundation(81660701&81260673)Project of Guangxi Graduate Education Innovation(YJS201625)+2 种基金Natural Science Foundation Project of Guangxi(2016GXNSFAA380148&2014GXNSFAA118208)Program of Key Laboratory for Purification and Quality Analysis of TCM Extraction in Guangxi Universities(Gui Jiao Ke Yan[2014]No.6)Laboratory of Chemistry and Quality Analysis in the Third Level Laboratory for Research of TCM(Zhuang)of State Administration of Traditional Chinese Medicine(Guo Zhong Yi Yao Fa[200]No.21)
文摘[Objectives] To establish a method for determining the content of Laggera alata( D. Don) Sch. Bip. Ex Oliv. using caffeic acid the target component,and to compare the content of caffeic acid in the medicinal materials of L. alata in different production areas of Guangxi.[Methods]The content was determined by Inertsil~ODS-3 chromatographic column C_(18)( 4. 60 mm × 250 mm,5 μm,mobile phase: acetonitrile-0. 1% phosphoric acid( 22∶ 78),detection wavelength: 320 nm,flow rate: 1. 0 m L/min,column temperature: 30℃,and injection volume: 10 μL. [Results] The caffeic acid showed a good linear relationship in the range of injection volume of 0. 025 92-0. 259 2 μg( R =0. 999 5). The average recovery rate was 98. 33%( RSD = 1. 85%). L. alata in different production areas of Guangxi contained the caffeic acid,and there was a great difference in the caffeic acid. L. alata in Baise had the highest content of caffeic acid,while that in Guilin had the lowest content of caffeic acid. [Conclusions]This method can accurately determine the content of caffeic acid and is expected provide a scientific basis for the development and utilization of herbal medicine L. alata.
基金Supported by Project of Sichuan College of Traditional Chinese Medicine(18ZRYB04).
文摘[Objectives]To optimize the ultrasonic-assisted extraction process for total flavonoids in Primula sikkimensis Hook.[Methods]The effects of ethanol volume fraction,extraction time,extraction temperature,ultrasonic time and solid-to-liquid ratio on the yield of total flavonoids were investigated by single factor method,and the extraction process for total flavonoids in P.sikkimensis was optimized by Box-Behnken experimental design.[Results]The optimal extraction process for total flavonoids in P.sikkimensis was ethanol volume fraction 45%,extraction time 29 min,extraction temperature 80℃,solid-to-liquid 1∶40(g/mL)and ultrasonic time 10 min.Under such conditions,the average yield of total flavonoids in P.sikkimensis was 3.09%.[Conclusions]The optimized extraction process is simple and feasible,and is expected to provide a reference for the extraction of total flavonoids in P.sikkimensis.
基金Basic Research Ability Enhancement Project for Young and Middle-aged Teachers in Colleges and Universities of Guangxi in 2019(No.2019KY0341)National Traditional Chinese Medicine Special Technology Inheritance Talent Training Project 2016+1 种基金Open Project of Guangxi Zhuang Yao Pharmaceutical Engineering Technology Research Center(No.KJT1900105)Youth Foundation of Guangxi University of Chinese Medicine(No.2019QN036).
文摘[Objectives]This paper aims to establish thin-layer identification and content determination method for Laggera alata(D.Don)Sch.Bip.ex Oliv.with chlorogenic acid as the index component and compare the content of chlorogenic acid in L.alata from different places in Guangxi.[Methods]Silica gel GF254 thin-layer plate was used for identification under an ultraviolet lamp(365 nm),with butyl acetate-formic acid-water(V∶V∶V=7∶2.5∶2.5)as a developing agent.The content of chlorogenic acid was determined under the following chromatographic conditions:column,Inertsil ODS-3 C18 column(4.60 mm×250 mm,5μm);mobile phase,methanol-0.1%phosphoric acid(28∶72);detection wavelength,329 nm;flow rate,1.0 mL/min;column temperature,25℃;and injection volume,10μL.[Results]Chlorogenic acid can be detected by thin layer chromatography with clear spot and good specificity.Chlorogenic acid showed a good linear relationship in the injection amount range of 0.099-0.99μg(R^(2)=0.9999).The content of chlorogenic acid in L.alata varied greatly among the 10 different producing areas in Guangxi.L.alata produced in Dee Township,Longlin,Baise,Guangxi showed the highest chlorogenic acid content,and that produced in Shangsi County and Pingle County showed the lowest chlorogenic acid content.[Conclusions]This method can effectively identify L.alata and accurately determine the content of chlorogenic acid,thereby providing a scientific basis for the development and utilization of L.alata resources.
基金Anhui Universities Provincial Key Project of Natural Science Research(No.KJ2016SD60,KJ2015ZD41)。
文摘Objective:To optimize the extraction process of total flavones in Trichosanthis Fructus(composed of Trichosanthis pericarpium and Trichosanthis semen in certain proportion).Methods:The effects of the mixture ratio of Trichosanthis pericarpium and Trichosanthis semen,ethanol concentration,ultrasonic extraction time and extraction temperature on the extraction rate of total flavonoids in Trichosanthis Fructus were investigated.The extraction process of total flavonoids in Trichosanthis Fructus was optimized by Box-Behnken response surface method combined with differential spectrophotometry.Results:The optimum extraction conditions of total flavonoids in Trichosanthis Fructus were as follows:The mixture ratio of Trichosanthis pericarpium and Trichosanthis semen was 4:6,the ethanol concentration was 70%,the ultrasonic extraction time was 60min and the extraction temperature was 40℃.Conclusion:Box-Behnken response surface method combined with differential spectrophotometry can optimize the extraction process of total flavonoids from Trichosanthis Fructus,which can provide reference for the extraction and application of total flavonoids in Trichosanthis Fructus.
基金National Traditional Chinese Medicine Characteristic Technology Heritage Talent Training Program(T20184828005,2015481601003).
文摘[Objectives]To optimize the extraction process of total flavonoids of Lonicerae japonica and establish a method for its extraction and content determination.[Methods]The total flavonoids of L.japonica were extracted by reflux extraction method.Through a single factor experiment,the effects of extraction method,extraction solvent concentration,extraction volume and extraction time on the total flavonoids content of medicinal materials were investigated to select the optimal extraction process of the total flavonoids of L.japonica.[Results]The optimal extraction process of the total flavonoids of L.japonica was 70%ethanol,1∶30 of solid-to-liquid ratio,and 1.0 h of reflux extraction time.[Conclusions]This method can effectively determine the content of total flavonoids in L.japonica and is expected to provide a certain scientific basis for the study of the quality standard of L.japonica.This method has high reproducibility.It is stable and feasible in extraction of total flavonoids from L.japonica.
基金Supported by Key R&D Projects of Guangxi Science and Technology Department (GUIKE AB21196057)Basic Scientific Research Ability Improvement Project of Young and Middle-aged Teachers in Guangxi Universities and Colleges in 2019 (2019KY0341)+1 种基金Open Project of Guangxi Zhuang Yao Medicine Key Laboratory (GXZYKF2020A-08)Zhuang Pharmacy,a Key Discipline of Traditional Chinese Medicine (Ethnic Pharmacy) in the"12^th Five-year" Plan of the State Administration of Traditional Chinese Medicine
文摘[Objectives]Taking chlorogenic acid as index component,TLC and content determination method of Laggerae Alatae Herba were established.[Methods]TLC identification used silica gel G thin-layer plate,and butyl acetate∶formic acid∶water(7∶2.5∶2.5)was taken as developing agent,and it was inspected under ultraviolet lamp(365 nm).The content was determined by chromatographic column Inertsil ODS-3 C_(18)(4.60 mm×250 mm,5μm).Mobile phase:methanol-0.1%phosphoric acid(28∶72);detection wavelength:329 nm;flow speed:1.0 mL/min;column temperature:25℃;injection volume:10μL.[Results]Chlorogenic acid can be detected by TLC,with clear spots and good specificity.When injection volume of chlorogenic acid was between 0.099 and 0.990μg(R^(2)=0.9999),there was good linear relationship.In low,medium and high sample adding groups of Laggerae Alatae Herba,average recovery rates of chlorogenic acids were 98.80%(RSD=2.09%),98.24%(RSD=1.96%)and 99.65%(RSD=2.15%).[Conclusions]The method could effectively identify medicinal material Laggerae Alatae Herba,and accurately measure the content of chlorogenic acid in Laggerae Alatae Herba,thereby providing a scientific basis for developing and using medicinal resources of Laggerae Alatae Herba.
基金Supported by Special Project for Central Leading Local Science and Technology Development in Sichuan Province:Southwestern Characteristic Chinese Medicine Resources Genetics Innovation Platform(2020ZYD058)Young Teachers Enhancement Project of Guangxi Department of Education in 2018(2018KY0300)2019-2021 Guangxi First-class Discipline Construction Open Project Fund for Young Scholars of Guangxi University of Chinese Medicine(2019XK089).
文摘[Objectives]To optimize the extraction process of total flavonoids from Eucommiae Cortex,establish the extraction and content determination methods of its medicinal materials,and study its in vitro antioxidant activity.[Methods]The total flavonoids from Eucommiae Cortex were extracted by reflux extraction method,and the effects of extraction method,extraction solvent concentration,extraction volume,and extraction time on the total flavonoids content of the medicinal materials were explored through the single factor experiment.Orthogonal experiment was carried out to optimize the extraction process conditions,and the optimal extraction process for total flavonoids from Eucommiae Cortex was screened out.The total antioxidant capacity index was used to determine the free radical scavenging ability of the total flavonoids from Eucommiae Cortex.[Results]The optimal extraction process of total flavonoids from Eucommiae Cortex was 50%ethanol,1∶40 solid-to-liquid-ratio,and 1.5 h reflux extraction time.Through the antioxidant experiment in vitro,it is found that the total flavonoids from Eucommiae Cortex have a higher scavenging ability for the total antioxidant capacity,and there is a certain positive correlation with the mass concentration of total flavonoids.[Conclusions]This method can effectively determine the total flavonoids content of Eucommiae Cortex medicinal material,and provide a certain scientific basis for the quality standard research of the medicinal material.The total flavonoids from Eucommiae Cortex have good in vitro antioxidant activity.And the method for extracting total flavonoids from Eucommiae Cortex medicinal material in this experiment has good repeatability,high stability and feasibility.
基金the Innovation and Entrepreneurship Training Program for College Students of Xiamen Medical College(202112631045).
文摘Flavonoids are secondary metabolites in plants and possess extensive pharmacological activities.Flavonoids have remarkable effect in prevent anti-tumor and cancer,but flavonoids can't be synthesized directly in the body.According to the different properties and structures of flavonoids in Traditional Chinese medicines,different extraction methods should be selected.Besides,flavonoids have good anti-aging effects.Based on three theories of modern aging,the anti-aging effect of flavonoids was discussed.It is expected to provide a beneficial reference for further development and utilization of natural flavonoid resources.
基金Supported by 2020 Guangxi University Middle-aged and Young Teachers'Basic Research Ability Improvement Project(No.2020KY13034)Scientific Research Task of Administration of Traditional Chinese Medicine of the Guangxi Zhuang Autonomous Region(No.GZZC2019147)+1 种基金the First Batch of High-level Talent Research Project in the Affiliated Hospital of Youjiang Medical University for Nationalities in 2019(No.Y20196311)School-level Scientific Research Project of Youjiang Medical University for Nationalities(No.yy2018ky018)。
文摘[Objectives]This study was conducted to optimize the extraction process of rutin in Flos Sophorae.[Methods]With the percentage content of rutin extracted from Flos Sophorae as the evaluation index and rutin as the reference substance,the content of rutin in Flos Sophorae extracted ultrasonically was determined by high performance liquid chromatography.L_(9)(3^(4))orthogonal experiments were carried out to optimize the three factors(solvent concentration,material-to-liquid ratio,extraction time)that affect the effect of ultrasonic extraction of rutin from Flos Sophorae.[Results]The extraction effect of the crude medicinal powder was best with the methanol concentration of 80%,the ratio of material to liquid at 0.1∶30,and the extraction time of 40 min.[Conclusions]This study provides a reference for optimizing the extraction process of rutin in Flos Sophorae.
基金National Undergraduate Innovation and Entrepreneurship Training Program of China(202111430049).
文摘[Objectives]To optimize the extraction process of polysaccharides from Actinidia arguta(Sieb.&Zucc.)Planch.ex Miq.[Methods]On the basis of single-factor tests,an orthogonal test was conducted with solid/liquid ratio,ultrasonic temperature,ultrasonic time and ultrasonic power as influencing factors.[Results]The optimal extraction process was as follows:solid/liquid ratio 1∶15(g/mL),ultrasonic temperature 50℃,ultrasonic time 50 min and ultrasonic power 90 W.Under the optimal extraction conditions,the extraction rate of polysaccharides reached 2.05%.[Conclusions]The method is simple and feasible,and can be used to optimize the extraction process of polysaccharides in A.arguta,in order to provide a theoretical basis for the further development and utilization of related resources.
基金financial support from Guangdong Major Project of Basic and Applied Basic Research(No.2019B030302007)Bureau of International Cooperation Chinese Academy of Sciences(121111KYSB20200043)+1 种基金National Natural Science Foundation of China(NSFC,21835006,51961135103)B.X.would like to acknowledge the financial support from Fundamental Research Funds for the Central Universities(buctrc202140).
文摘Comprehensive Summary Cathode interlayers(CILs)play an essential role in achieving efficient organic solar cells(OSCs).However,the electronic structure at the electrode/CIL/active layer interfaces and the underlying mechanisms for electron collection remain unclear,which becomes a major obstacle to develop high-performance CILs.Herein,we investigate the relationship of the electron collection abilities of four cross-linked and n-doped CILs(c-NDI:P0,c-NDI:P1,c-NDI:P2,c-NDI:P3)with their electronic structure of space charge region at heterojunction interface.By accurately calculating the depletion region width according to the barrier height,doping density and permittivity,we put forward that the optimal thickness of CIL should be consistent with the depletion region width to realize the minimum energy loss.As a result,the depletion region width is largely reduced from 13 nm to 0.8 nm at the indium tin oxide(ITO)/c-NDI:P0 interface,resulting in a decent PCE of 17.7%for the corresponding inverted OSCs.
基金support from the National Natural Science Foundation of China(Grant No.52064010)Outstanding Young Scientists and Technologists Program of Guizhou Province,China(Grant No.[2021]5644)+1 种基金the Key Nurturing Projects of Guizhou University(Grant No.[2019]07)the Natural Science Research Project of Guizhou Provincial Department of Education([2022]041).
文摘Almost 29.57–38.46 million tons of zinc-bearing dust were produced in Chinese iron and steel enterprises annually.The recovery of Zn and other metals in zinc-bearing dust from ironmaking and steelmaking could improve economic efficiency.However,zinc-bearing dust was classified as hazardous waste,and the volatile metals(like Zn,Na,Pb,etc.)in zinc-bearing dust limited the direct reusing in a blast furnace.Therefore,the formation process,fundamental characteristics,and current extraction process of Zn from zinc-bearing dust,associated with thermodynamics and kinetics of the pyrometallurgical process,hydrometallurgical process,and pyro-hydrometallurgical process,were analyzed.It is indicated that industrialized pyrometallurgical processes are undergoing high energy consumption and pollution such as rotary kiln and rotary hearth furnace process.The vacuum carbothermal reduction process can realize low carbon emission and no waste produced in the process.The hydrometallurgical leaching processes in strong acid,strong alkali,and ammonium solutions result in serious liquid pollution and equipment corrosion.The pyrometallurgical process involves complex kinetics and lacks kinetic research on semi-industrialization and industrialization.Water-soluble components in zinc-bearing dust can be removed by water leaching.The kinetics of the strong acid leaching is mainly controlled by the leaching kinetics of Fe_(2)O_(3) and ZnFe_(2)O_(4),while the alkali leaching and weak acid leaching are controlled by the kinetics of ZnO leaching.Zn in the zincbearing dust can be extracted by a low-temperature sodium roasting–weak acid leaching process that reduces equipment corrosion and environmental pollution.
基金Supported by Key Research Project of Wuhan Municipal Health Commission(WZ21A08).
文摘[Objectives]To determine the optimal reflux extraction process conditions for Compound Coptis Ointment.[Methods]The study employed the orthogonal experimental design method and drug-sensitive disc agar diffusion method to evaluate the extraction rate,berberine hydrochloride content,and bacteriostatic ring diameter of the extract as comprehensive indices,and optimized the extraction process conditions of Compound Coptis Ointment using ethanol reflux.[Results]Based on the results of comprehensive indices,the optimal reflux extraction conditions for Compound Coptis Ointment were determined to be soaking in 1.5 times the amount of 70%ethanol for 2 h,followed by two extractions with 6 times the amount of 70%ethanol for 1 h each time.Three verification tests were conducted under the optimal process conditions.The yield of the extract was 28.32%±0.53%,the content of berberine hydrochloride was 4.68%±0.45%,and the diameter of the bacteriostatic ring was(2.5±0.2)cm.[Conclusions]The extract had higher drug content and exhibited better antibacterial effects.The optimized extraction process is simple,stable,and reliable,and can be effectively used to optimize the extraction process of Compound Coptis Ointment.