Structural Modal Parameter Recognition and Related Damage Identification Methods under Environmental Excitations: A Review

Modal parameters can accurately characterize the structural dynamic properties and assess the physical state of the structure.Therefore,it is particularly significant to identify the structural modal parameters according to the monitoring data information in the structural health monitoring(SHM)system,so as to provide a scientific basis for structural damage identification and dynamic model modification.In view of this,this paper reviews methods for identifying structural modal parameters under environmental excitation and briefly describes how to identify structural damages based on the derived modal parameters.The paper primarily introduces data-driven modal parameter recognition methods(e.g.,time-domain,frequency-domain,and time-frequency-domain methods,etc.),briefly describes damage identification methods based on the variations of modal parameters(e.g.,natural frequency,modal shapes,and curvature modal shapes,etc.)and modal validation methods(e.g.,Stability Diagram and Modal Assurance Criterion,etc.).The current status of the application of artificial intelligence(AI)methods in the direction of modal parameter recognition and damage identification is further discussed.Based on the pre-vious analysis,the main development trends of structural modal parameter recognition and damage identification methods are given to provide scientific references for the optimized design and functional upgrading of SHM systems.

基于Power Extrapolation和Adaptive Method的网页评估新算法

Google的PageRank算法通过对超链接结构的分析,有效地提高了搜索结果的排序质量。PowerExtrapolation算法通过特征值直接求解马尔可夫超链接矩阵的主特征向量,但该算法的迭代次数与参数d的选择密切相关,而参数d的确定目前无明显规律可寻。另一方面,AdaptiveMethod通过将马尔可夫超链接矩阵稀疏化以达到节省迭代时间的目的。文章在PowerExtrapolation算法的基础上引入AdaptiveMethod,实验结果初步证明了新算法可以减少迭代运算的时间。

SnO_2-based solid solutions for CH_4 deep oxidation: Quantifying the lattice capacity of SnO_2 using an X-ray diffraction extrapolation method

A series of SnO2‐based catalysts modified by Mn, Zr, Ti and Pb oxides with a Sn/M （M=Mn, Zr, Ti and Pb） molar ratio of 9/1 were prepared by a co‐precipitation method and used for CH4 and CO oxidation. The Mn3＋, Zr4＋, Ti4＋and Pb4＋cations are incorporated into the lattice of tetragonal rutile SnO2 to form a solid solution structure. As a consequence, the surface area and thermal stability of the catalysts are improved. Moreover, the oxygen species of the modified catalysts become easier to be reduced. Therefore, the oxidation activity over the catalysts was improved, except for the one modified by Pb oxide. Manganese oxide demonstrates the best promotional effects for SnO2. Using an X‐ray diffraction extrapolation method, the lattice capacity of SnO2 for Mn2O3 was 0.135 g Mn2O3/g SnO2, which indicates that to form stable solid solution, only 21%Sn4＋cations in the lattice can be maximally replaced by Mn3＋. If the amount of Mn3＋cations is over the capacity, Mn2O3 will be formed, which is not favorable for the activity of the catalysts. The Sn rich samples with only Sn‐Mn solid solution phase show higher activity than the ones with excess Mn2O3 species.

Fatigue life evaluation of girth butt weld within welded cast steel joints based on the extrapolation notch stress method

The fatigue life evaluation of the girth butt weld within the welded cast steel joint was studied based on the extrapolation notch stress method.Firstly,the mesh sensitivity of the finite element model of the welded cast steel joint was analyzed to determine the optimal mesh size.Based on the stress field analysis of the finite element model of the welded cast steel joint at the weld toe and weld root,the sharp model of the extrapolation notch stress method was applied to derive the effective notch stress of the rounded model belonging to the effective notch stress method,in which the key problem is to calculate the extrapolation point C,and the extrapolation point C has an exponential function relationship with the geometric parameters of the welded cast steel joint.By setting different values of geometric parameters,the corresponding value of parameter C is calculated,and then the functional relationship between the extrapolation point C and the geometric parameters can be obtained by the multiple linear regression analysis.Meanwhile,the fatigue life evaluation of the girth butt weld within welded cast steel joints based on the effective notch stress was performed according to the guideline recommended by the IIW(International Institute of Welding).The results indicate that the extrapolation notch stress method can effectively simplify the process of calculating the effective notch stress and accurately evaluate the fatigue life of the girth butt weld within welded cast steel joints.

A SIMPLE PROOF OF STABILITY AND CONVERGENCE IN L＿2 FOR SOME DIFFERENCE SCHEMES AND THEIR EXTRAPOLATION METHOD FOR PARABOLIC EQUATIONS

ＡＳＩＭＰＬＥＰＲＯＯＦＯＦＳＴＡＢＩＬＩＴＹＡＮＤＣＯＮＶＥＲＧＥＮＣＥＩＮＬ＿２ＦＯＲＳＯＭＥＤＩＦＦＥＲＥＮＣＥＳＣＨＥＭＥＳＡＮＤＴＨＥＩＲＥＸＴＲＡＰＯＬＡＴＩＯＮＭＥＴＨＯＤＦＯＲＰＡＲＡＢＯＬＩＣＥＱＵＡＴＩＯＮＳＳｕｎＺｈｉｚｈｏｎｇ...

Methods of Lightning Nowcasting Based on Radar Echo Extrapolation Technology

An improved echo extrapolation technology( MOD-COTREC) was introduced firstly,and then two plans for lightning nowcasting based on MOD-COTREC and both isothermal radar reflectivity and MOD-COTREC were proposed based on the technology. Afterwards,the two plans for lightning nowcasting were tested by a case respectively. It is concluded that during the process of lightning nowcasting singly based on MOD-COTREC,the appearance and disappearance of lightning are not considered,and only lightning position is predicted when lightning density is constant,so the prediction error is big. The plan for lightning nowcasting based on both isothermal radar reflectivity and MOD-COTREC is still at an experimental stage,and the nowcasting products of cloud-to-ground lightning based on the plan are very different from the actual density and position of cloud-to-ground lightning,so it needs to be improved further.

WAVE FIELD EXTRAPOLATION IN VISCOELASTIC MEDIUM AND VARIABLE FOCUS METHOD TO SEPARATE SEISMIC COMPOUND WAVE

ＷＡＶＥＦＩＥＬＤＥＸＴＲＡＰＯＬＡＴＩＯＮＩＮＶＩＳＣＯＥＬＡＳＴＩＣＭＥＤＩＵＭＡＮＤＶＡＲＩＡＢＬＥＦＯＣＵＳＭＥＴＨＯＤＴＯＳＥＰＡＲＡＴＥＳＥＩＳＭＩＣＣＯＭＰＯＵＮＤＷＡＶＥ￥ＳｏｎｇＳｈｏｕｇｅｎ；ＹｕａｎＸｉｕｇｕｉ；ＨｅＪｉｓｈａｎ...

Extrapolation Method for Cauchy Principal Value Integral with Classical Rectangle Rule on Interval

In this paper,the classical composite middle rectangle rule for the computation of Cauchy principal value integral(the singular kernel 1=(x-s))is discussed.With the density function approximated only while the singular kernel is calculated analysis,then the error functional of asymptotic expansion is obtained.We construct a series to approach the singular point.An extrapolation algorithm is presented and the convergence rate of extrapolation algorithm is proved.At last,some numerical results are presented to confirm the theoretical results and show the efficiency of the algorithms.

SVD-MPE: An SVD-Based Vector Extrapolation Method of Polynomial Type

An important problem that arises in different areas of science and engineering is that of computing the limits of sequences of vectors , where , N being very large. Such sequences arise, for example, in the solution of systems of linear or nonlinear equations by fixed-point iterative methods, and are simply the required solutions. In most cases of interest, however, these sequences converge to their limits extremely slowly. One practical way to make the sequences converge more quickly is to apply to them vector extrapolation methods. Two types of methods exist in the literature: polynomial type methods and epsilon algorithms. In most applications, the polynomial type methods have proved to be superior convergence accelerators. Three polynomial type methods are known, and these are the minimal polynomial extrapolation (MPE), the reduced rank extrapolation (RRE), and the modified minimal polynomial extrapolation (MMPE). In this work, we develop yet another polynomial type method, which is based on the singular value decomposition, as well as the ideas that lead to MPE. We denote this new method by SVD-MPE. We also design a numerically stable algorithm for its implementation, whose computational cost and storage requirements are minimal. Finally, we illustrate the use of SVD-MPE with numerical examples.

GENERALIZED INVERSE RATIONAL EXTRAPOLATION METHODS FOR MATRIX SEQUENCES

Assume that a convergent matrix sequence{An}:An→A（n→∞）, An,A∈C3×3.We want to form a new matrix sequence {Hn}, derived from {An}, which has also A aslimit and whose convergence is faster than the of {An}. Three rational extrapolation meth-ods for accelerating the convergence of matrix sequences {An} are presented in this paper.The underlying methods are based on the generalized inverse for matrices which is

Some Numerical Extrapolation Methods for the Fractional Sub-diffusion Equation and Fractional Wave Equation Based on the L1 Formula

With the help of the asymptotic expansion for the classic Li formula and based on the L1-type compact difference scheme,we propose a temporal Richardson extrapolation method for the fractional sub-diffusion equation.Three extrapolation formulas are presented,whose temporal convergence orders in L_(∞)-norm are proved to be 2,3-α,and 4-2α,respectively,where 0<α<1.Similarly,by the method of order reduction,an extrapola-tion method is constructed for the fractional wave equation including two extrapolation formulas,which achieve temporal 4-γ and 6-2γ order in L_(∞)-norm,respectively,where1<γ<2.Combining the derived extrapolation methods with the fast algorithm for Caputo fractional derivative based on the sum-of-exponential approximation,the fast extrapolation methods are obtained which reduce the computational complexity significantly while keep-ing the accuracy.Several numerical experiments confirm the theoretical results.

A New Extrapolation Treatment for Boundary Conditions in Lattice Boltzmann Method

The lattice Boltzmann method is widely used in solving hydrodynamics for various systems.The accuracy of the extrapolation method for boundary conditions and Mei’s method for curved boundary is not high enough.We propose a modified extrapolation method for boundary conditions.Numerical simulations conform the higher accuracy and stability compared with the other methods.

A THEORY FOR WAVE EQUATION INVERSE PROBLEM:THE UNION METHOD FOR SCATTERED WAVEEXTRAPOLATION AND VELOCITY IMAGING

A new theory for inverse problem of wave equation, that is, the union method for scattered wave extrapolation and velocity imaging, is proposed in this paper. This method is very different from the classical wave extrapolation for migration, because we relate directly the scattered wave extrapolation to velocity inversion. And also this method is different from any linearized inverse method of wave equation, because we needn′t use linearized approximation. Because of this, the method can be applied to strong scattering case effectively (i.e. the value of scattered wave is not small, which can not be neglected). This method, of course, is different from nonlinearized optimum inverse method, because in this paper, the nonlinear inverse problem is turned into two steps inverse problem, i.e. scattered wave extrapolated and velocity imaging, which can be solved easily. Hence, the problem how to get the global optimum solution by using the nonlinearized optimum inverse method doesn′t bother us by using the method in this paper.

EXTRAPOLATION FOR COLLOCATION METHOD OF THE FIRST KIND VOLTERRA INTEGRAL EQUATIONS

1. Introduction It is known that the following Cauchy problem for a parabolic partial differential equation (where the values at the right boundary, u.(1, t)=v(t) are unknown and sought for) is ill-posed: the solution (v) does not depend continuously on the data (g). In order to treat the ill-posedness and develop the numerical method, one reformulates the problem as a Volterra integral equation of the first kind wish a convolution type kernel (see Sneddon [1], Carslaw and Jaeger [2])

A Review on Sources,Extractions and Analysis Methods of a Sustainable Biomaterial:Tannins

Condensed and hydrolysable tannins are non-toxic natural polyphenols that are a commercial commodity industrialized for tanning hides to obtain leather and for a growing number of other industrial applications mainly to substitute petroleum-based products.They are a definite class of sustainable materials of the forestry industry.They have been in operation for hundreds of years to manufacture leather and now for a growing number of applications in a variety of other industries,such as wood adhesives,metal coating,pharmaceutical/medical applications and several others.This review presents the main sources,either already or potentially commercial of this forestry by-materials,their industrial and laboratory extraction systems,their systems of analysis with their advantages and drawbacks,be these methods so simple to even appear primitive but nonetheless of proven effectiveness,or very modern and instrumental.It constitutes a basic but essential summary of what is necessary to know of these sustainable materials.In doing so,the review highlights some of the main challenges that remain to be addressed to deliver the quality and economics of tannin supply necessary to fulfill the industrial production requirements for some materials-based uses.

A Method of Determining Realistic Stress S/N Curves by Interpolations and Extrapolations of Two Known Best-Fit S/N Curves for Fatigue Life Predictions

The design and sizing of new mechanical components which are intended to operate under cyclic loads often require an acceptable level of confidence that the components will meet pre-defined fatigue strength objectives for crack initiation. For loads with multiple amplitudes and mean values, models based on Palmgren-Miner’s linear cumulative damage hypothesis and on multiple S/N curves (stress-no. cycles) are widely used in estimations for the duration of crack initiation. In this paper a procedure for generating S/N curves for multiple stress ratios by interpolation or extrapolation from the data available for two such curves is proposed. At any number of cycles, the stress for crack initiation is calculated from the far field macroscopic stresses of the known curves using Dang Van fatigue criterion and microscopic stresses evaluated at the grain level. An algorithm is presented for uniaxial loading and results verifications against curves established from laboratory tests with elastic and plastic stresses are shown and discussed for notched and un-notched specimens.

A New Extrapolation Economy Cascadic Multigrid Method for Image Restoration Problems

In this paper, a new extrapolation economy cascadic multigrid method is proposed to solve the image restoration model. The new method combines the new extrapolation formula and quadratic interpolation to design a nonlinear prolongation operator, which provides more accurate initial values for the fine grid level. An edge preserving denoising operator is constructed to remove noise and preserve image edges. The local smoothing operator reduces the influence of staircase effect. The experiment results show that the new method not only improves the computational efficiency but also ensures good recovery quality.

Drilling-based measuring method for the c-φ parameter of rock and its field application

The technology of drilling tests makes it possible to obtain the strength parameter of rock accurately in situ. In this paper, a new rock cutting analysis model that considers the influence of the rock crushing zone(RCZ) is built. The formula for an ultimate cutting force is established based on the limit equilibrium principle. The relationship between digital drilling parameters(DDP) and the c-φ parameter(DDP-cφ formula, where c refers to the cohesion and φ refers to the internal friction angle) is derived, and the response of drilling parameters and cutting ratio to the strength parameters is analyzed. The drillingbased measuring method for the c-φ parameter of rock is constructed. The laboratory verification test is then completed, and the difference in results between the drilling test and the compression test is less than 6%. On this basis, in-situ rock drilling tests in a traffic tunnel and a coal mine roadway are carried out, and the strength parameters of the surrounding rock are effectively tested. The average difference ratio of the results is less than 11%, which verifies the effectiveness of the proposed method for obtaining the strength parameters based on digital drilling. This study provides methodological support for field testing of rock strength parameters.

A comparison study on structure-function relationship of polysaccharides obtained from sea buckthorn berries using different methods:antioxidant and bile acid-binding capacity

In this study,the structural characters,antioxidant activities and bile acid-binding ability of sea buckthorn polysaccharides(HRPs)obtained by the commonly used hot water(HRP-W),pressurized hot water(HRP-H),ultrasonic(HRP-U),acid(HRP-C)and alkali(HRP-A)assisted extraction methods were investigated.The results demonstrated that extraction methods had significant effects on extraction yield,monosaccharide composition,molecular weight,particle size,triple-helical structure,and surface morphology of HRPs except for the major linkage bands.Thermogravimetric analysis showed that HRP-U with filamentous reticular microstructure exhibited better thermal stability.The HRP-A with the lowest molecular weight and highest arabinose content possessed the best antioxidant activities.Moreover,the rheological analysis indicated that HRPs with higher galacturonic acid content and molecular weight showed higher viscosity and stronger crosslinking network(HRP-C,HRP-W and HRP-U),which exhibited stronger bile acid binding capacity.The present findings provide scientific evidence in the preparation technology of sea buckthorn polysaccharides with good antioxidant and bile acid binding capacity which are related to the structure affected by the extraction methods.

Submarine Magnetic Field Extrapolation Based on Boundary Element Method

In order to master the magnetic field distribution of submarines in the air completely and exactly and study the magnetic stealthy performance of submarine,a mathematic model of submarine magnetic field extrapolation is built based on the boundary element method(BEM).An experiment is designed to measure three components of magnetic field on the envelope surface surrounding a model submarine.The data in different heights above the model submarine are obtained by use of tri-axial magnetometers.The results show that this extrapolation model has good stabilities and high accuracies compared the measured data with the extrapolated data.Moreover,the model can reflect the submarine magnetic field distribution in the air exactly,and is valuable in practical engineering.