Numerical Simulation of Oil-Water Two-Phase Flow in Low Permeability Tight Reservoirs Based on Weighted Least Squares Meshless Method

In response to the complex characteristics of actual low-permeability tight reservoirs,this study develops a meshless-based numerical simulation method for oil-water two-phase flow in these reservoirs,considering complex boundary shapes.Utilizing radial basis function point interpolation,the method approximates shape functions for unknown functions within the nodal influence domain.The shape functions constructed by the aforementioned meshless interpolation method haveδ-function properties,which facilitate the handling of essential aspects like the controlled bottom-hole flow pressure in horizontal wells.Moreover,the meshless method offers greater flexibility and freedom compared to grid cell discretization,making it simpler to discretize complex geometries.A variational principle for the flow control equation group is introduced using a weighted least squares meshless method,and the pressure distribution is solved implicitly.Example results demonstrate that the computational outcomes of the meshless point cloud model,which has a relatively small degree of freedom,are in close agreement with those of the Discrete Fracture Model(DFM)employing refined grid partitioning,with pressure calculation accuracy exceeding 98.2%.Compared to high-resolution grid-based computational methods,the meshless method can achieve a better balance between computational efficiency and accuracy.Additionally,the impact of fracture half-length on the productivity of horizontal wells is discussed.The results indicate that increasing the fracture half-length is an effective strategy for enhancing production from the perspective of cumulative oil production.

Fracture Distribution Characteristics within Low-Permeability Reservoirs:Cases Studies from Three Types of Oil-bearing Basins,China

The permeability or/and porosity in low-permeability reservoirs mainly depends on fracture system. Wthin this kind of low-permeability reservior, fractures play a very important role on exploration and development. Because there are so many differences, such as basin properties and tectonic characteristics, among the eastern,western and central basins, the types and distribution characteristics of fractures are also obviously different. Quantitative information on fracture distribution is very important. Through the contrastive study of 7 oilfield, the differences and distribution characteristics of fractures in three types of oil-bearing basins are summarized. Due to the different geological conditions and stress state during the formation of fractures, the fracture systems in three types of basins are also different. Fractures are mainly composed of tectonic fractutres related to normal faultes in eastern basins, related to folds and reverse faultes in western basins, and regional fractures which widely distributed not only in outcrops but also at depth of the relatively undeformed strata in central basins. So, besides jointed-fractures, we can often see faulted-fractures similar to normal faults in eastern basins and similar to reverse faults in western basins. According to statistical data, fracture spacing generally has a lognormal distribution and is linearly proportional to layer thickness. The development degree of fractures is controlled by lithology, bed thickness, sedimentary microfacies and faults or folds, etc. The permeability, aperture and connectedness of fractures are related to the modern stress field. Though there are 3-4 sets of fractures in a oilfield, the fractures parallel to the maximum principal stress direction are main for the pattern arrangement of low-permeability reservoirs.

An overview of efficient development practices at low permeability sandstone reservoirs in China

Low permeability sandstone reservoirs in China typically have more complicated geological conditions, pore structures, and flow characteristics as compared to medium-to-high-permeability sandstone reservoirs. Traditional geological and seepage theories, and engineering methods are not applicable to the development of these low permeability reservoirs, and wells drilled into them often produce oil and gas at very low rates. Recent breakthroughs in reservoir exploitation technology have greatly improved the productivity of low permeability reservoirs, making them the primary target for oil exploration and extraction in China. The development theories and practices applied to low permeability reservoirs in China are reviewed in this study— based on relevant geological and engineering practices, including drilling, fracturing, recovery, and surface engineering. A unique series of technological advances that aid the development of low permeability reservoirs in China are summarized here. This study may serve as a meaningful guide in achieving scale efficiency for the development of low permeability reservoirs.

The Relationship between Fractures and Tectonic Stress Field in the Extra Low-Permeability Sandstone Reservoir at the South of Western Sichuan Depression

The formation and distribution of fractures are controlled by paleotectonic stress field, and their preservative status and effects on development are dominated by the modern stress field. Since Triassic, it has experienced four tectonic movements and developed four sets of tectonic fractures in the extra low-permeability sandstone reservoir at the south of western Sichuan depression. The strikes of fractures are in the S-N, NE-SW, E-W, and NW-SE directions respectively. At the end of Triassic, under the horizontal compression tectonic stress field, for which the maximum principal stress direction was NW.SE, the fractures were well developed near the S-N faults and at the end of NE-SW faults, because of their stress concentration. At the end of Cretaceous, in the horizontal compression stress fields of the NE-SW direction, the stress was obviously lower near the NE-SW faults, thus, fractures mainly developed near the S-N faults. At the end of Neogene-Early Pleistocene, under the horizontal compression tectonic stress fields of E-W direction, stress concentrated near the NE-SW faults and fractures developed at these places, especially at the end of the NE-SE faults, the cross positions of NE-SW, and S-N faults. Therefore, fractures developed mostly near S-N faults and NE-SW faults. At the cross positions of the above two sets of faults, the degree of development of the fractures was the highest. Under the modern stress field of the NW-SE direction, the NW-SE fractures were mainly the seepage ones with tensional state, the best connectivity, the widest aperture, the highest permeability, and the minimum opening pressure.

The tectonic fracture modeling of an ultra-low permeability sandstone reservoir based on an outcrop analogy: A case study in the Wangyao Oilfield of Ordos Basin, China

Due to inherent limits of data acquisition and geophysical data resolution, there are large uncertainties in the characterization of subsurface fractures. However, outcrop analogies can provide qualitative and quantitative information on a large number of fractures, based on which the accuracy of subsurface fracture characterization can be improved. Here we take the tectonic fracture modeling of an ultra-low permeability sandstone reservoir based on an outcrop analogy, a case study of the Chang6t~ Formation of the Upper Triassic Yanchang Group of the Wangyao Oilfield in the Ordos Basin of China. An outcrop at the edge of the basin is a suitable analog for the reservoir, but the prerequisite is that they must have equivalent previous stress fields, similar final structural characteristics, relative timing and an identical depositional environment and diagenesis. The relationship among fracture density, rock type and bed thickness based on the outcrop is one of the most important fracture distribution models, and can be used to interpret fracture density in individual wells quantitatively. Fracture orientation, dip, geometry and scale, also should be described and measured in the outcrop, and can be used together with structure restoration and single well fracture density interpretation to guide fracture intensity prediction on bed surfaces and to constrain the construction of the 3D fracture geometry model of the subsurface reservoir. The application of the above principles shows the outcrop-based tectonic fracture models of the target ultra-low permeability sandstone reservoir are consistent with fractures inferred from microseismic interpretation and tracer tests. This illustrated that the fracture modeling based on the outcrop analogy is reliable and can reduce the uncertainty in stochastic fracture modeling.

Test evaluation for vertical fracture wells in low permeability reservoir

As flow environment is poor in low permeability reservoirs, wells are always fractured in order to gain better economic benefits. Well testing analysis is very necessary for fracturing wells. However, available test analysis methods are of slow fitting speed and low fitting precision. In this paper, we first use a comprehensive evaluation method of analytical well testing, numerical well testing and well testing design. Many dynamic parameters such as fracture length, fracture conductivity, skin factor, etc are obtained. An example to illustrate accurate results of this method is given.

Development of the theory and technology for low permeability reservoirs in China

The development theories of low-permeability oil and gas reservoirs are refined, the key development technologies are summarized, and the prospect and technical direction of sustainable development are discussed based on the understanding and research on developed low-permeability oil and gas resources in China. The main achievements include:(1) the theories of low-permeability reservoir seepage, dual-medium seepage, relative homogeneity, etc.(2) the well location optimization technology combining favorable area of reservoir with gas-bearing prediction and combining pre-stack with post-stack;(3) oriented perforating multi-fracture, multistage sand adding, multistage temporary plugging, vertical well multilayer, horizontal and other fracturing techniques to improve productivity of single well;(4) the technology of increasing injection and keeping pressure, such as overall decreasing pressure, local pressurization, shaped charge stamping and plugging removal, fine separate injection, mild advanced water injection and so on;(5) enhanced recovery technology of optimization of injection-production well network in horizontal wells. To continue to develop low-permeability reserves economically and effectively, there are three aspects of work to be done well:(1) depending on technical improvement, continue to innovate new technologies and methods, establish a new mode of low quality reservoir development economically, determine the main technical boundaries and form replacement technology reserves of advanced development;(2) adhering to the management system of low cost technology & low cost, set up a complete set of low-cost dual integration innovation system through continuous innovation in technology and management;(3) striving for national preferential policies.

A Comprehensive Evaluation Method for Low-permeability Reservoirs

According to the geological characteristics and their influential factors of the low-permeability reservoirs, a comprehensive method for evaluation of low-permeability reservoirs is put forward. The method takes a matrix system as the basis, a fracture system as the focus and a stress field system as the restricted factor. It can objectively reflect not only the storage capability and seepage capability of low-permeability reservoirs, but also the effect on development as well. At the same time, it can predict the seepage characteristics at different development stages and provide a reasonable geological basis for the development of low-permeability reservoirs.

Method of moderate water injection and its application in ultra-low permeability oil reservoirs of Yanchang Oilfield, NW China

To explore the method of improving development effect and solving the problem of water breakthrough and water out for ultralow permeability fractured reservoirs, an indoor evaluation method of dynamic imbibition for fracture-matrix system was established taking the Chang 8 reservoir in southern Yanchang Oilfield as a research target. Key factors for the imbibition effect were obtained, an imbibition's rate expression was obtained, a model considering the double effects of imbibition-displacement was built and optimal injection and production parameters for the research area were obtained as well. The results show that an optimum displacement rate that maximizes the oil displacement efficiency exists in the water displacing oil process, and the optimal displacing rate becomes smaller as the permeability decreases. The imbibition displacement efficiency increases as the reservoir quality index and water wettability index of rock become bigger. But the larger the initial water saturation or oil-water viscosity ratio is, the smaller the imbibition displacement efficiency is. The optimal injection-production ratio for the Chang 8 reservoir of southern Yanchang Oilfield is 0.95, and the predicted recovery is 17.2% when the water cut is 95%, it is 2.9% higher than the recovery of conventional injection-production ratio 1.2. By using the moderate water injection technique based on the double effects of imbibition-displacement mechanism, the water injection development effect for the ultra-low permeability fractured reservoirs can be improved significantly.

An evaluation method of volume fracturing effects for vertical wells in low permeability reservoirs

To evaluate the fracturing effect and dynamic change process after volume fracturing with vertical wells in low permeability oil reservoirs, an oil-water two-phase flow model and a well model are built. On this basis, an evaluation method of fracturing effect based on production data and fracturing fluid backflow data is established, and the method is used to analyze some field cases. The vicinity area of main fracture after fracturing is divided into different stimulated regions. The permeability and area of different regions are used to characterize the stimulation strength and scale of the fracture network. The conductivity of stimulated region is defined as the product of the permeability and area of the stimulated region. Through parameter sensitivity analysis, it is found that half-length of the fracture and the permeability of the core area mainly affect the flow law near the well, that is, the early stage of production;while matrix permeability mainly affects the flow law at the far end of the fracture. Taking a typical old well in Changqing Oilfield as an example, the fracturing effect and its changes after two rounds of volume fracturing in this well are evaluated. It is found that with the increase of production time after the first volume fracturing, the permeability and conductivity of stimulated area gradually decreased, and the fracturing effect gradually decreased until disappeared;after the second volume fracturing, the permeability and conductivity of stimulated area increased significantly again.

A new method of building permeability model in low-permeability reservoir numerical simulation

Aiming at solving the problem that big differ-ence exists between logging permeability and true permeability of micro-fractured low-permeability sand reservoir, this paper puts forward a new method to revise logging per-meability by using primiparity data of oil field. This method has been successfully applied to revise logging permeability of micro-fractured low-permeability sand reservoir in Baiyushan area of Jing’An oil field, which shows that the method is reliable because the geological model building through the permeability which has been handled by this method accords with the real reservoir significantly.

Fracturing-flooding technology for low permeability reservoirs:A review

The development of low-permeability oil and gas resources presents a significant challenge to traditional development methods.To address the problem of“no injection and no production”in low-permeability reservoirs,a novel fracture-injection-production integration technology named fracturing-flooding has been proposed by oilfield sites.This technology combines the advantages of conventional fracturing,water flooding,and chemical flooding,resulting in improved reservoir physical properties,increased injection,replenished energy,and increased oil displacement efficiency.The technology is especially suitable for low-permeability reservoirs that suffer from lack of energy,and strong heterogeneity.Fracturing-flooding technology has shown significant results and broad development prospects in some oilfields in China.This paper analyzes the development status of fracturing-flooding technology from its development history,technical mechanism,technical characteristics,process flow,types of fracturing and oil displacement fluids,and field applications.Physical and numerical simulations of fracturingflooding technology are also summarized.The results suggest that fracturing-flooding technology is more effective than conventional fracturing,water flooding,and chemical flooding in stimulating lowpermeability tight reservoirs and improving oil recovery.Moreover,it has a high input-output ratio and can be utilized for future reservoir stimulation and transformation.

Success in Developing Low－permeable Reservoir by Using Modern Fracturing Technique

A research project"Overall Fracturing Refor-mation and Evaluation for Sanjianfang Low-permeable Oil Formations,Shanshan Oilfield'has been jointly accomplished by Branch of CNPC Research Institute of Exploration and Develop-ment and Turpan-Hami Oilfields,and was ap-praised by CNPC recently.This technique improved the development result of Shanshan oil field.Productivity index was increased by 2.28 times and production rate for a signle well was doubled.A total of 117 production wells were fractured from May,1991 to April,1993,and 371900 tons of crude Wwas increased,with an accumulative value of 197 million Yuan.

胜利油田GF84区块CCUS气窜封堵技术及其应用

胜利油田GF84区块为低渗透油藏,采出程度较低,CO_(2)驱是提高该区块采收率的有效措施之一。在前期开发中注采井之间已形成明显的气窜通道,现阶段亟需进行气窜封堵,提高CO_(2)驱波及系数,实现均衡驱替。通过分析GF84区块气窜特征与开发矛盾,将气窜类型划分为“裂缝型气窜”和“基质型气窜”,并制定了“裂缝封堵”和“基质调剖”的治理策略。在明确气窜特征的基础上,通过室内实验研发了硅盐树脂堵剂、CO_(2)气溶性发泡剂和高温冻胶堵剂,并形成了“硅盐树脂裂缝封堵+CO_(2)气溶性发泡剂、高温冻胶基质调剖”化学封堵分级调控技术。结果表明,该技术在GF84区块成功应用4口井,其中硅盐树脂裂缝封堵2口井,CO_(2)气溶性发泡剂基质调剖2口井,措施有效率100%,有效期在0.5 a以上。研究成果可为低渗透油田CO_(2)驱开发提供技术支撑。

碎软低渗煤储层强化与煤层气地面开发技术进展

我国碎软低渗煤储层分布广泛,然而由于其煤体松软、破碎、渗透性差,常规的直井/水平井煤储层直接压裂技术应用于碎软低渗煤储层强化及其煤层气地面开发的效果并不理想,碎软低渗煤储层煤层气的高效开发是制约我国煤层气产业大规模发展以及煤矿瓦斯高效治理的重要技术瓶颈。在系统分析我国碎软低渗煤储层特征及煤层气地面开发中存在的问题基础上,以水平井为基础井型,围绕间接压裂、应力释放和先固结后压裂3种不同的技术方向,梳理了目前碎软低渗煤储层强化与煤层气地面开发技术进展。归纳评述了以顶板间接压裂、夹矸层间接压裂以及硬煤分层间接压裂为内涵的间接压裂煤层气开发技术,以水力喷射造穴、气体动力造穴、扩孔+水力喷射+流体加卸载诱导失稳造穴、水力割缝为不同应力释放方式的应力释放煤层气开发技术,以及先微生物诱导碳酸钙固结碎软煤储层再进行水力压裂的先固结后压裂煤层气开发技术。间接压裂技术的工程实践探索已有较多积累,在地质条件适宜地区对碎软低渗煤储层强化取得了较好效果,而以应力释放为代表的碎软低渗煤储层强化新技术探索已取得重大进展,并进入工程试验和验证阶段。水平井应力释放技术针对碎软低渗煤储层特性和新的开发原理,其对储层改造潜力更大、煤层气开发效果会更好。基于水平井应力释放技术,围绕扩大应力释放范围、提高煤层气开发效果以及实现煤与煤层气共采3个方面,对碎软低渗煤储层强化及煤层气地面开发技术的发展趋势进行了展望,以期为改善我国碎软低渗煤储层增产改造效果以及提高煤层气单井产量提供参考。

低渗透油藏压驱技术现状及发展趋势

压驱技术是近年来针对低渗透油藏高效开发而提出的一种增加储层动用程度、提高原油采收率的储层改造技术。压驱技术先通过高压小排量向地层注入大量携带化学剂的液体,然后进行焖井,通过压力的扩散和化学剂与裂缝孔隙中的原油充分置换而达到增产的目的。文中结合国内外压驱技术的最新研究动态,从压驱技术现状、设计原则、设计方法、应用分析及发展趋势等方面展开论述,重点分析了压驱技术与水力压裂技术的区别、增产机理和设计方法以及现场应用效果等,同时也指出了当前压驱技术理论研究方面的欠缺,展望了该技术的发展趋势和应用前景。

煤层顶板间接压裂裂缝扩展机制及影响因素

碎软低渗煤层在我国普遍发育,制约煤层气单井产气量提高和产业发展。间接压裂是通过在邻近层产生垂直裂缝沟通煤层进而实现煤层有效改造的一种压裂方式,可以有效应对钻井塌陷、煤粉产出、压裂液滤失和煤层厚度薄等不利因素。通过间接压裂物理模拟试验和扩展有限元数值模拟分析,揭示煤层顶板间接压裂裂缝扩展影响因素,明确裂缝扩展机制,以期为间接压裂技术提供指导。通过直接压裂煤层和不同起裂位置、垂向应力和施工排量影响下间接压裂试验表明,起裂压力高,更易产生长裂缝,且受原生裂缝影响程度减小;但起裂点距离煤层越远,起裂所需能量越大,高破裂压力会对煤层造成粉碎性破坏;大施工排量下,起裂压力对应升高,起裂时间变短,原生裂缝影响程度变小。考虑地应力、起裂位置、岩石力学和施工排量等参数的数值模拟结果显示,在模型参数设置条件下,最大水平主应力和垂向应力差在<4 MPa,煤层与顶板有效应力差>3 MPa、弹性模量差<15 GPa的地层和岩性组合适合间接压裂,起裂位置距离煤层最优距离为<6 m,施工排量需要根据力学性质、断裂能密度等参数确定最优范围。

低渗透砂岩储层压驱裂缝起裂及扩展特征实验研究

针对水驱低渗透油藏地层能量补充困难、“注不进、采不出”的问题,胜利油田结合提液稳产技术需求,形成了针对低渗透油藏的压驱注水技术。压驱通过高压注水有效提高了水驱注水总量,矿场试验表明压驱过程中储层形成了一定规模的裂缝,但压驱破裂压力及裂缝扩展规律尚不明确。为了优化矿场施工参数,采用天然砂岩和真三轴水力压裂平台开展5组压驱与压裂物理模拟实验,研究注入排量对压驱破裂压力和裂缝形态的影响,分析注入方式对裂缝形态的影响,并利用多孔弹性理论分析其成因。结果表明:压驱过程同时存在明显的起裂压力和破裂压力,裂缝发育呈现弹性变形、微破裂和失稳破裂3个阶段。随着注入排量升高,起裂压力基本不变,破裂压力逐渐降低。H-F模型可用于预测起裂压力,H-W模型可用于预测破裂压力的上限。压驱裂缝扩展方向受岩石非均质性的影响较大,非均质性通过影响井眼附近的孔隙压力场,进而改变应力场,使裂缝扩展方向不再垂直于最小地应力。定排量注入时,分支缝与主裂缝夹角大,形成鱼骨状裂缝;变排量注入时,分支缝与主裂缝近平行,在主裂缝两侧形成裂缝带。

Z89区块全缝长压裂模拟及储层改造研究

随着中国陆相油田进入开发中后期,开发难度逐渐攀升,如含水率过高、采收率下降等问题愈发严重。进一步对剩余油进行开发是油藏提高产能的关键问题,解决问题的关键措施包括开发单元的精细化剖分、分层注采及酸化、封堵、压裂等储层改造措施。基于井间力学参数模型,对压裂人工裂缝的三维全缝长进行数值模拟,并对裂缝与井网匹配、人工裂缝三维空间形态进行优化研究,建立更加有效的驱动体系,最大限度地扩大有效波及体积。在数值模拟基础上,将井网、砂体、人工裂缝、油水井关系统一考虑,不同类型储层采取不同规模的改造方式达到开发效果最优的储层改造技术,实现低渗透储层的有效开发。