10CrMo910 and 316 stainless steel are widely adopted in high temperature structures of power generations, chemical processing plants and petroleum refineries. In this work, a total of 10000 hour tensile creep test on ...10CrMo910 and 316 stainless steel are widely adopted in high temperature structures of power generations, chemical processing plants and petroleum refineries. In this work, a total of 10000 hour tensile creep test on 16 specimens of such two materials was conducted at 550℃. On the basis of the experimental results, the isochronous stress-strain curves and time-dependent failure assessment curves of the two materials were given. Finally, the formulae of time dependent failure assessment curve for 10CrMo910 and 316 stainless steel corresponding to long-term creep cases, which could be utilized in the high temperature defects assessment, were established. The procedure for defining the time-dependent failure assessment curves was also presented.展开更多
It is of great importance to establish the dam failure risk criteria for dam risk assessment and management. Presently, the F-N curve method is widely applied in practice, in which the F-N curves are used for establis...It is of great importance to establish the dam failure risk criteria for dam risk assessment and management. Presently, the F-N curve method is widely applied in practice, in which the F-N curves are used for establishing the criteria for separate risks caused by the dam failure in life, economy, environment, and society respectively. In this paper, in consideration of the overlying effect by two or more types of risk losses resulting from the dam failure at the same time, the F-N curved surface method is presented for establishing the integrated dam failure risk criteria. In this method, the named F-N curved surfaces are established, and by these curved surfaces, the acceptable, the allowable, and the unallowable integrated risk zones can be defined.展开更多
基金supported by the National Natural Science Foundation of China(No.50225517)the Natural Science Foundation of Shanghai(No.03ZR14022)
文摘10CrMo910 and 316 stainless steel are widely adopted in high temperature structures of power generations, chemical processing plants and petroleum refineries. In this work, a total of 10000 hour tensile creep test on 16 specimens of such two materials was conducted at 550℃. On the basis of the experimental results, the isochronous stress-strain curves and time-dependent failure assessment curves of the two materials were given. Finally, the formulae of time dependent failure assessment curve for 10CrMo910 and 316 stainless steel corresponding to long-term creep cases, which could be utilized in the high temperature defects assessment, were established. The procedure for defining the time-dependent failure assessment curves was also presented.
基金supported by the National Natural Science Foundation of China (Grant No. 50779009)
文摘It is of great importance to establish the dam failure risk criteria for dam risk assessment and management. Presently, the F-N curve method is widely applied in practice, in which the F-N curves are used for establishing the criteria for separate risks caused by the dam failure in life, economy, environment, and society respectively. In this paper, in consideration of the overlying effect by two or more types of risk losses resulting from the dam failure at the same time, the F-N curved surface method is presented for establishing the integrated dam failure risk criteria. In this method, the named F-N curved surfaces are established, and by these curved surfaces, the acceptable, the allowable, and the unallowable integrated risk zones can be defined.
