Experimental study of the dynamic mechanical responses and failure characteristics of coal under true triaxial confinements

Investigations on the dynamic mechanical properties and failure mechanisms of coal under in-situ stress is essential for the prevention of dynamic disasters in deep coal mines.Thus,a modified true triaxial Hopkinson bar was employed to explore the dynamic mechanical behaviors of coal at different confining pressures(0–20 MPa)and strain rates(40–220 s^(-1)).The results show that the dynamic peak stress is positively correlated with lateral static pre-stressσy andσz,but negatively correlated with axial static prestressσx.At approximate strain rates,increasing the lateral static pre-stress facilitates increasing the dynamic peak stress,but the minimum lateral static pre-stress is the primary factor limiting a significant increase in dynamic peak stress of coal.Furthermore,the dynamic differential stress is linearly related to the logarithm of strain rate,and the peak strain varies linearly with strain rate.However,there is no significant correlation between confining pressure and peak strain.Moreover,X-ray CT images and photographic fracture observations of coal samples show the failure patterns under uniaxial and triaxial conditions are splitting failure and shear failure,respectively.The device provides a viable approach for fully comprehending the dynamic mechanical behaviors of rock-like material in complex stress conditions.

Experimental study on seismic response and progressive failure characteristics of bedding rock slopes

Bedding rock slopes are common geological features in nature that are prone to failure under strong earthquakes. Their failures induce catastrophic landslides and form barrier lakes, posing severe threats to people’s lives and property. Based on the similarity criteria, a bedding rock slope model with a length of3 m, a width of 0.8 m, and a height of 1.6 m was constructed to facilitate large-scale shaking table tests.The results showed that with the increase of vibration time, the natural frequency of the model slope decreased, but the damping ratio increased. Damage to the rock mass structure altered the dynamic characteristics of the slope;therefore, amplification of the acceleration was found to be nonlinear and uneven. Furthermore, the acceleration was amplified nonlinearly with the increase of slope elevation along the slope surface and the vertical section, and the maximum acceleration amplification factor(AAF) occurred at the slope crest. Before visible deformation, the AAF increased with increasing shaking intensity;however, it decreased with increasing shaking intensity after obvious deformation. The slope was likely to slide along the bedding planes at a shallow depth below the slope surface. The upper part of the slope mainly experienced a tensile-shear effect, whereas the lower part suffered a compressive-shear force. The progressive failure process of the model slope can be divided into four stages, and the dislocated rock mass can be summarized into three zones. The testing data provide a good explanation of the dynamic behavior of the rock slope when subjected to an earthquake and may serve as a helpful reference in implementing antiseismic measures for earthquake-induced landslides.

Numerical investigation on the fatigue failure characteristics of waterbearing sandstone under cyclic loading

The strength of sandstone decreases significantly with higher water content attributing to softening effects.This scenario can pose a severe threat to the stability of reservoirs of pumped storage power stations developed from abandoned mines,especially when subjected to the cyclic loading condition caused by the repeated drainage and storage of water(fatigue damage).Based on this,it is essential to focus on the fatigue failure characteristics.In this study,the mineral composition of the used sandstone of Ruineng coal mine in Shanxi Province,China,was first tested to elucidate the rock softening mechanism after absorbing water.Next,a numerical model for replicating the mechanical behavior of water-bearing sandstone was established using twodimensional particle flow code(PFC2D)with a novel contact model.Then,16 uniaxial cyclic loading simulations with distinct loading parameters related to reservoir conditions(loading frequency,amplitude level,and maximum stress level)and different water contents were conducted.The numerical results show that all these three loading parameters affect the failure characteristics of sandstone,including irreversible strain,damage evolution,strain behavior,and fatigue life.The influence degree of these three parameters on failure behavior increases in the order of maximum stress level,loading frequency,and amplitude level.However,for the samples with different water contents,their failure characteristics are similar under the same loading conditions.Furthermore,the failure mode is almost unaffected by the loading parameters,while the water content plays a significant role and causing the transformation from the tensile splitting with low water content to the shear failure with higher water content.

Research on damage failure mechanism and dynamic mechanical behavior of layered shale with different angles under confining pressure

The hydrostatic or confining pressure of deep rocks has a significant impact on the mechanical behavior of brittle materials.Especially when confining pressure is applied,the mechanical properties of rock materials will undergo significant changes.Considering that the process of shale sample subjected to impact load is in a closed container in the dynamic triaxial SHPB test,the failure process of the sample cannot be observed.Meanwhile,the activation volume of the shale sample would be large and local failure would occur in the test under the high strain rate loading.Therefore,thefinite element model of shale considering the bedding effect under confining pressure was established in this study.Taking shale materials with different bedding dip angles as simulation objects,the dynamic failure characteristics of shale were studied using the dynamic analysis software ANSYS/LS‐DYNA from three aspects:stress‐strain curve,failure growth process,and failure morphology.The research results obtained can serve as the key technical parameters for deep resource extraction.

Time-domain characteristics of overlying strata failure under condition of longwall ascending mining

Ascending mining is one of the most effective ways to solve problems of water inrush, gas outburst and rock burst in coal seams mining. In order to reveal the law of motion and spatiotemporal relationship of overlaying strata, field measurement has been done in a mine. Long distance drillings were constructed from 4# coal seam to 6# coal seam at several certain typical positions, and movement and failure law of overlying strata after mining was analyzed by drilling video and observing the fluid leakage. Besides, we also analyzed the spatiotemporal development law of overlying strata failure with different mining heights and time intervals in the lower coal seam. The results show that: ascending mining is significantly affected by time-domain characteristics of overlaying strata failure after the lower coal seam's mining, height equations of caving zone and fractured zone are given in this paper, and the feasibility of ascending mining was compartmentalized concretely according to the spatiotemporal relationship. Research methods and conclusions of this paper have certain referential significance for the study of ascending mining, mining under water, mining under building, mining under railway and stress-relief mining.

Tuning microstructures of TC4 ELI to improve explosion resistance

A reasonable heat treatment process for TC4 ELI titanium alloy is crucial to tune microstructures to improve its explosion resistance.However,there is limited investigation on tuning microstructures of TC4 ELI to improve explosion resistance.Moreover,the current challenge is quantifying microstructural changes'effects on explosion resistance and incorporating microstructural changes into finite element models.This work aims to tune microstructures to improve explosion resistance and elucidate their anti-explosion mechanism,and find a suitable method to incorporate microstructural changes into finite element models.In this work,we systematically study the deformation and failure characteristics of TC4 ELI plates with varying microstructures using an air explosion test and LS-DYNA finite element modeling.The Johnson-Cook(JC)constitutive parameters are used to quantify the effects of microstructural changes on explosion resistance and incorporate microstructural changes into finite element models.Because of the heat treatment,one plate has equiaxed microstructure and the other has bimodal microstructure.The convex of the plate after the explosion has a quadratic relationship with the charge mass,and the simulation results demonstrate high reliability,with the error less than 17.5%.Therefore,it is feasible to obtain corresponding JC constitutive parameters based on the differences in microstructures and mechanical properties and characterize the effects of microstructural changes on explosion resistance.The bimodal target exhibits excellent deformation resistance.The response of bimodal microstructure to the shock wave may be more intense under explosive loading.The well-coordinated structure of the bimodal target enhances its resistance to deformation.

Mechanism of subsidence-buckling and instability of slopes in thick-layered rigid rock under mining

The deformation and failure of mining slopes in layered rocks predominantly result from shear landslides.However,the instability process of the Pusa rock avalanche in Guizhou,China,revealed a unique damage phenomenon:prominent breaking and toppling of rock blocks occurred in the central section of the mountain,with a lack of commonly observed shear landslide features.This paper aims to investigate the underlying reasons behind this distinctive damage pattern.The study employs various methods including geological survey,UAV aerial survey,physical simulation,and discrete element numerical simulation.The findings indicate that the geological conditions,characterized by a hard upper layer and a soft lower layer along with underground mining activities,play a significant role in triggering the landslide.Furthermore,the presence of a columnar structured rock mass emerges as the primary factor influencing the instability of the Pusa rock avalanche.To elucidate the mining failure mechanism of the rock mass with vertical joints,we propose a"subsidence-buckling"failure model.Following the subsidence and collapse of the roof rock mass in the goaf,the columnar rock mass in the upper and middle portions of the slope undergoes deflection and deformation,forming a three-hinged arch structure.This structural configuration converts the pressure exerted by the overlying rock mass into both vertical pressure and lateral thrust.Under the influence of external loads,the slope experiences buckling failure,ultimately leading to instability upon fragmentation.By shedding light on these findings,this study contributes to a better understanding of the spatiotemporal evolution of mining slope fractures and their impact on slope stability.

Effect of cyclic wetting-drying on tensile mechanical behavior and microstructure of clay-bearing sandstone

The understanding of the weakening mechanism of tensile strength of rock subjected to cyclic wetting-drying is critical for rock engineering.Tensile strength tests were conducted on a total of 35 sandstone specimens with different wetting-drying cycles.The crack propagation process and acoustic emission characteristics of the tested samples were obtained through a high-speed camera and acoustic emission system.The results indicate that the tensile strength is observably reduced after cyclic wetting-drying,and the extent of the reduction is not only related to the number of wettingdrying cycle,but also closely related to the clay mineral content of the sample.In addition,as the cycles of wetting-drying increase,the effect of each single cycle on tensile strength get reduced until it becomes constant.Moreover,the crack initiation and penetration time is prolonged as the number of wetting-drying cycle increases,which indicates that cyclic wetting-drying weakens the rock stiffness and enhances the ductility of sandstone.Meanwhile,the acoustic emission characteristics of the tested samples further confirmed the ductile behaviour of the sandstone samples with increasing wetting-drying cycle.Furthermore,through the analysis of the microstructure and mineral composition of the samples with different wetting-drying cycles,it is concluded that the main weakening mechanisms of sandstones containing clay minerals are frictional reduction,chemical and corrosive deterioration.

Laboratory investigation into effect of bolt profiles on shear behaviors of bolt-grout interface under constant normal stiffness (CNS) conditions

Rock bolts have been widely used for stabilizing rock mass in geotechnical engineering.It is acknowledged that the bolt profiles have a sound influence on the support effect of the rock bolting system.Previous studies have proposed some optimal rib parameters(e.g.rib spacing);unfortunately,the interface shear behaviors are generally ignored.Therefore,determination of radial stress and radial displacement on the bolt-grout interface using traditional pull-out tests is not possible.The load-bearing capacity and deformation capacity vary as bolt profiles differ,suggesting that the support effect of the bolting system can be enhanced by optimizing bolt profiles.The aim of this study is to investigate the effects of bolt profiles(with/without ribs,rib spacing,and rib height)on the shear behaviors between the rock bolt and grout material using direct shear tests.Thereby,systematic interfacial shear tests with different bolt profiles were performed under both constant normal load(CNL)and constant normal stiffness(CNS)boundary conditions.The results suggested that rib spacing has a more marked influence on the interface shear behavior than rib height does,in particular at the post-yield stage.The results could facilitate our understanding of bolt-grout interface shear behavior under CNS conditions,and optimize selection of rock bolts under in situ rock conditions.

A model test on an open-cut tunnel structure under the effect of a stick-slip normal fault

Purpose–Large displacement misalignment under the action of active faults can cause complex threedimensional deformation in subway tunnels,resulting in severe damage,distortion and misalignment.There is no developed system of fortification and related codes to follow.There are scientific problems and technical challenges in this field that have never been encountered in past research and practices.Design/methodology/approach–This paper adopted a self-designed large-scale active fault dislocation simulation loading system to conduct a similar model test of the tunnel under active fault dislocation based on the open-cut tunnel project of the Urumqi Rail Transit Line 2,which passes through the Jiujiawan normal fault.The test simulated the subway tunnel passing through the normal fault,which is inclined at 608.This research compared and analyzed the differences in mechanical behavior between two types of lining section:the opencut double-line box tunnel and the modified double-line box arch tunnel.The structural response and failure characteristics of the open-cut segmented lining of the tunnel under the stick-slip part of the normal fault were studied.Findings–The results indicated that the double-line box arch tunnel improved the shear and longitudinal bending performance.Longitudinal cracks were mainly distributed in the baseplate,wall foot and arch foot,and the crack position was basically consistent with the longitudinal distribution of surrounding rock pressure.This indicated that the longitudinal cracks were due to the large local load of the cross-section of the structure,leading to an excessive local bending moment of the structure,which resulted in large eccentric failure of the lining and formation of longitudinal cracks.Compared with the ordinary box section tunnel,the improved double-line box arch tunnel significantly reduced the destroyed and damage areas of the hanging wall and footwall.The damage area and crack length were reduced by 39 and 59.3%,respectively.This indicates that the improved double-line box arch tunnel had good anti-sliding performance.Originality/value–This paper adopted a self-designed large-scale active fault dislocation simulation loading system to conduct a similar model test of the tunnel under active fault dislocation.This system increased the similarity ratio of the test model,improved the dislocation loading rate and optimized the simulation scheme of the segmented flexible lining and other key factors affecting the test.It is of great scientific significance and engineering value to investigate the structure of subway tunnels under active fault misalignment,to study its force characteristics and damage modes,and to provide a technical reserve for the design and construction of subway tunnels through active faults.