Progressive failure processes of reinforced slopes based on general particle dynamic method

In order to resolve grid distortions in finite element method(FEM), the meshless numerical method which is called general particle dynamics(GPD) was presented to simulate the large deformation and failure of geomaterials. The Mohr-Coulomb strength criterion was implemented into the code to describe the elasto-brittle behaviours of geomaterials while the solid-structure(reinforcing pile) interaction was simulated as an elasto-brittle material. The Weibull statistical approach was applied to describing the heterogeneity of geomaterials. As an application of general particle dynamics to slopes, the interaction between the slopes and the reinforcing pile was modelled. The contact between the geomaterials and the reinforcing pile was modelled by using the coupling condition associated with a Lennard-Jones repulsive force. The safety factor, corresponding to the minimum shear strength reduction factor "R", was obtained, and the slip surface of the slope was determined. The numerical results are in good agreement with those obtained from limit equilibrium method and finite element method. It indicates that the proposed geomaterial-structure interaction algorithm works well in the GPD framework.

Pressure stimulated current in progressive failure process of combined coal-rock under uniaxial compression:Response and mechanism

Effective monitoring of the structural health of combined coal-rock under complex geological conditions by pressure stimulated currents(PSCs)has great potential for the understanding of dynamic disasters in underground engineering.To reveal the effect of this way,the uniaxial compression experiments with PSC monitoring were conducted on three types of coal-rock combination samples with different strength combinations.The mechanism explanation of PSCs are investigated by resistivity test,atomic force microscopy(AFM)and computed tomography(CT)methods,and a PSC flow model based on progressive failure process is proposed.The influence of strength combinations on PSCs in the progressive failure process are emphasized.The results show the PSC responses between rock part,coal part and the two components are different,which are affected by multi-scale fracture characteristics and electrical properties.As the rock strength decreases,the progressive failure process changes obviously with the influence range of interface constraint effect decreasing,resulting in the different responses of PSC strength and direction in different parts to fracture behaviors.The PSC flow model is initially validated by the relationship between the accumulated charges of different parts.The results are expected to provide a new reference and method for mining design and roadway quality assessment.

Numerical investigation of hydro-morphodynamic characteristics of a cascading failure of landslide dams

A cascading failure of landslide dams caused by strong earthquakes or torrential rains in mountainous river valleys can pose great threats to people’s lives,properties,and infrastructures.In this study,based on the three-dimensional Reynoldsaveraged Navier-Stokes equations(RANS),the renormalization group(RNG)k-εturbulence model,suspended and bed load transport equations,and the instability discriminant formula of dam breach side slope,and the explicit finite volume method(FVM),a detailed numerical simulation model for calculating the hydro-morphodynamic characteristics of cascading dam breach process has been developed.The developed numerical model can simulate the breach hydrograph and the dam breach morphology evolution during the cascading failure process of landslide dams.A model test of the breaches of two cascading landslide dams has been used as the validation case.The comparison of the calculated and measured results indicates that the breach hydrograph and the breach morphology evolution process of the upstream and downstream dams are generally consistent with each other,and the relative errors of the key breaching parameters,i.e.,the peak breach flow and the time to peak of each dam,are less than±5%.Further,the comparison of the breach hydrographs of the upstream and downstream dams shows that there is an amplification effect of the breach flood on the cascading landslide dam failures.Three key parameters,i.e.,the distance between the upstream and the downstream dams,the river channel slope,and the downstream dam height,have been used to study the flood amplification effect.The parameter sensitivity analyses show that the peak breach flow at the downstream dam decreases with increasing distance between the upstream and the downstream dams,and the downstream dam height.Further,the peak breach flow at the downstream dam first increases and then decreases with steepening of the river channel slope.When the flood caused by the upstream dam failure flows to the downstream dam,it can produce a surge wave that overtops and erodes the dam crest,resulting in a lowering of the dam crest elevation.This has an impact on the failure occurrence time and the peak breach flow of the downstream dam.The influence of the surge wave on the downstream dam failure process is related to the volume of water that overtops the dam crest and the erosion characteristics of dam material.Moreover,the cascading failure case of the Xiaogangjian and Lower Xiaogangjian landslide dams has also been used as the representative case for validating the model.In comparisons of the calculated and measured breach hydrographs and final breach morphologies,the relative errors of the key dam breaching parameters are all within±10%,which verify the rationality of the model is applicable to real-world cases.Overall,the numerical model developed in this study can provide important technical support for the risk assessment and emergency treatment of failures of cascading landslide dams.

Reliability modeling of mutual DCFP considering failure physical dependency

Degradation and overstress failures occur in many electronic systems in which the operation load and environmental conditions are complex.The dependency of them called dependent competing failure process(DCFP),has been widely studied.Electronic system may experience mutual effects of degradation and shocks,they are considered to be interdependent.Both the degradation and the shock processes will decrease the limit of system and cause cumulative effect.Finally,the competition of hard and soft failure will cause the system failure.Based on the failure mechanism accumulation theory,this paper constructs the shock-degradation acceleration and the threshold descent model,and a system reliability model established by using these two models.The mutually DCFP effect of electronic system interaction has been decomposed into physical correlation of failure,including acceleration,accumulation and competition.As a case,a reliability of electronic system in aeronautical system has been analyzed with the proposed method.The method proposed is based on failure physical evaluation,and could provide important reference for quantitative evaluation and design improvement of the newly designed system in case of data deficiency.

Reliability assessment considering dependent competing failure process and shifting-threshold

The reliability assessment problem for products subject to degradation and random shocks is investigated. Two kinds of probabilistic models are constructed, in which the dependent competing failure process is considered. First, based on the assumption of cumulative shock, the probabilistic models for hard failure and soft failure are built respectively. On this basis, the dependent competing failure model involving degradation and shock processes is established. Furthermore, the situation of the shifting-threshold is also considered, in which the hard failure threshold value decreases to a lower level after the arrival of a certain number of shocks. A case study of fatigue crack growth is given to illustrate the proposed models. Numerical results show that shock has a significant effect on the failure process; meanwhile, the effect will be magnified when the value of the hard threshold shifts to a lower level.

Numerical analysis of hydraulic fracture propagation in deep shale reservoir with different injection strategies

Deep shale reservoirs are characterized by elevated breakdown pressures,diminished fracture complexity,and reduced modified volumes compared to medium and shallow reservoirs.Therefore,it is urgent to investigate particular injection strategies that can optimize breakdown pressure and fracturing efficiency to address the increasing demands for deep shale reservoir stimulation.In this study,the efficiency of various stimulation strategies,including multi-cluster simultaneous fracturing,modified alternating fracturing,alternating shut-in fracturing,and cyclic alternating fracturing,was evaluated.Subsequently,the sensitivity of factors such as the cycle index,shut-in time,cluster spacing,and horizontal permeability was investigated.Additionally,the flow distribution effect within the wellbore was discussed.The results indicate that relative to multi-cluster simultaneous fracturing,modified alternating fracturing exhibits reduced susceptibility to the stress shadow effect,which results in earlier breakdown,extended hydraulic fracture lengths,and more consistent propagation despite an increase in breakdown pressure.The alternating shut-in fracturing benefits the increase of fracture length,which is closely related to the shut-in time.Furthermore,cyclic alternating fracturing markedly lowers breakdown pressure and contributes to uniform fracture propagation,in which the cycle count plays an important role.Modified alternating fracturing demonstrates insensitivity to variations in cluster spacing,whereas horizontal permeability is a critical factor affecting fracture length.The wellbore effect restrains the accumulation of pressure and flow near the perforation,delaying the initiation of hydraulic fractures.The simulation results can provide valuable numerical insights for optimizing injection strategies for deep shale hydraulic fracturing.

Mitigating the negative catalytic effect of CuO by FAS-17 coated Al nanopowder:Isothermal ageing of Al/CuO nanothermite at 71°C and 60%relative humidity

The safety and reliability of weapon systems would be significantly affected by changes in the performance of energetic materials due to ambient temperature and humidity.Nanothermites have promising applications due to their excellent reactivity.Therefore it becomes extremely important to understand their aging and failure process in the environment before using them.Here,the aging and failure process of Al/CuO in 71°C/60%RH were investigated,and showed that CuO nanoparticles negatively catalyze Al nanopowders,resulting in rapid hydration.The anti-aging effect of FAS-17-coated Al nanopowder was also examined.The aging process of Al,Al/CuO,and Al@FAS-17/CuO in high humidity and heat environment were revealed by quasi-in situ SEM and TEM methods.Compared with the aging of pure Al,the Al nanopowder in the nanothermites strongly agglomerated with the CuO nanopowder and hydrated earlier.This may be caused by CuO catalyzed hydration of Al nanopowder.The energy release experiments showed that the performance of Al/CuO decreased rapidly and failed to ignite after 4 h of aging.In contrast,the Al@FAS-17/CuO thermite can achieve long-term stability of up to 60 h in the same environment by simple cladding of FAS-17.It is found that FAS-17 coated Al nanopowder can prevent both particle agglomeration and water erosion,which is an effective means to make nanothermites application in high humidity and heat environment.

Characteristics and interpretation of the seismic signal of a field-scale landslide dam failure experiment

Outburst floods caused by breaches of landslide dams may cause serious damages and loss of lives in downstream areas; for this reason the study of the dynamic of the process is of particular interest for hazard and risk assessment. In this paper we report a field-scale landslide dam failure experiment conducted in Nantou County, in the central of Taiwan.The seismic signal generated during the dam failure was monitored using a broadband seismometer and the signal was used to study the dam failure process.We used the short-time Fourier transform(STFT) to obtain the time–frequency characteristics of the signal and analyzed the correlation between the power spectrum density(PSD) of the signal and the water level. The results indicate that the seismic signal generated during the process consisted of three components: a low-frequency band(0–1.5 Hz), an intermediate-frequency band(1.5–10 Hz) and a highfrequency band(10–45 Hz). We obtained the characteristics of each frequency band and the variations of the signal in various stages of the landslide dam failure process. We determined the cause for the signal changes in each frequency band and its relationship with the dam failure process. The PSD sediment flux estimation model was used to interpret the causes of variations in the signal energy before the dam failure and the clockwise hysteresis during the failure. Our results show that the seismic signal reflects the physical characteristics of the landslide dam failure process. The method and equipment used in this study may be used to monitor landslide dams and providing early warnings for dam failures.

Failure Process and Energy Transmission for Single-Layer Reticulated Domes Under Impact Loads

No failure, moderate failure, severe failure, and slight failure are the four failure modes generalized observed in the dynamic response of the single-layer reticulated dome under vertical impact load on apex. TE (the time that the end of impact force) and TF (the time that members are broken) are two key times in the failure process. Characteristics of dynamic responses at the two key times are shown in order to make the failure mechanism clear. Then three steps of energy transfer are summarized, i.e. energy applying, energy loss and energy transfer, energy consump-tion. Based on the three steps, energy transfer process for the failure reticulated dome under once impact is introduced. Energy transmissibility and local loss ratio are put forward firstly to obtain EL F(the energy left in the main reticulated dome) from the initial kinetic energy of impactor. More-over, the distribution of failure modes is decided by EL F which leads to the maximum dynamic re-sponse of the reticulated dome, but not by the initial impact kinetic energy of impactor.

Numerical analysis of tunnel reinforcing influences on failure process of surrounding rock under explosive stress waves

Based on mesoscopic damage mechanics, numerical code RFPA2D （dynamic edition） was developed to analyze the influence of tunnel reinforcing on failure process of surrounding rock under explosive stress waves. The results show that the propagation phenomenon of stress wave in the surrounding rock of tunnel and the failure process of surrounding rock under explosive stress waves are reproduced realistically by using numerical code RFPA2O; from the failure process of surrounding rock, the place at which surrounding rock fractures is transferred because of tunnel reinforcing, and the rockfall and collapse caused by failure of surrounding rock are restrained by tunnel reinforcing; furthermore, the absolute values of peak values of major principal stress, and the minimal principal stress and shear stress at center point of tunnel roof are reduced because of tunnel reinforcing, and the displacement at center point of runnel roof is reduced as well, consequently the stability of tunnel increases.

Numerical simulation study of the failure evolution process and failure mode of surrounding rock in deep soft rock roadways

Based on the safety coefficient method,which assigns rock failure criteria to calculate the rock mass unit,the safety coefficient contour of surrounding rock is plotted to judge the distribution form of the fractured zone in the roadway.This will provide the basis numerical simulation to calculate the surrounding rock fractured zone in a roadway.Using the single factor and multi-factor orthogonal test method,the evolution law of roadway surrounding rock displacements,plastic zone and stress distribution under different conditions is studied.It reveals the roadway surrounding rock burst evolution process,and obtains five kinds of failure modes in deep soft rock roadway.Using the fuzzy mathematics clustering analysis method,the deep soft surrounding rock failure model in Zhujixi mine can be classified and patterns recognized.Compared to the identification results and the results detected by geological radar of surrounding rock loose circle,the reliability of the results of the pattern recognition is verified and lays the foundations for the support design of deep soft rock roadways.

Impact Failure of Flattened Brazilian Disc with Cracks——Process and Mechanism

Split Hopkinson pressure bar(SHPB)has been used to study the dynamic failure pattern of flattened mortar Brazilian disc under impact load.Each disc contains several prefabricated cracks paralleled to each other.Dynamic FEM has also been adopted to simulate such failure behavior.The mechanism of crack initiation,propagation and cut-through have been scrutinized with both experimental and numerical approaches.Influence of the number of the prefabricated cracks on the specimen strength and acoustic emission(AE)performance can be observed and studied.The results show that the strength decreases and AE counts increases,when the number of the prefabricated cracks increases.

Mechanical response features and failure process of soft surrounding rock around deeply buried three-centered arch tunnel

Due to the extreme complexity of mechanical response of soft surrounding rock(SR) around a tunnel under high geostatic stress conditions, the integration of physical and numerical modeling techniques was adopted. Based on the similarity theory, new composite-similar material was developed, which showed good agreement with the similarity relation and successfully simulated physico-mechanical properties(PMP) of deep buried soft rock. And the 800 mm×800 mm×200 mm physical model(PM) was conducted, in which the endoscopic camera technique was adopted to track the entire process of failure of the model all the time. The experimental results indicate that the deformation of SR around a underground cavern possessed the characteristics of development by stages and in delay, and the initial damage of SR could induce rapid failure in the later stage, and the whole process could be divided into three stages, including the localized extension of crack(the horizontal load(HL) was in the range of 130 k N to 170 k N, the vertical load(VL) was in the range of 119 k N to 153.8 k N), rapid crack coalescence(the HL was in the range of 170 k N to 210 k N, the VL was in the range of 153.8 k N to 182.5 k N) and residual strength(the HL was greater than 210 k N, the VL was greater than 182.5 k N). Under the high stress conditions, the phenomenon of deformation localization in the SR became serious and different space positions show different deformation characteristics. In order to further explore the deformation localization and progressive failure phenomenon of soft SR around the deeply buried tunnel, applying the analysis software of FLAC3 D three-dimensional explicit finite-difference method, based on the composite strain-softening model of Mohr-Coulomb shear failure and tensile failure, the calculation method of large deformation was adopted. Then, the comparative analysis between the PM experiment and numerical simulation of the three centered arch tunnels was implemented and the relationship of deformation localization and progressive failure of SR around a tunnel under high stress conditions was discussed.

Deformation tests and failure process analysis of an anchorage structure

In order to study the failure process of an anchorage structure and the evolution law of the body＇s defor- mation field, anchor push-out tests were carried out based on digital speckle correlation methods （DSCM）. The stress distribution of the anchorage interface was investigated using the particle flow numerical simulation method. The results indicate that there are three stages in the deformation and fail- ure process of an anchorage structure： elastic bonding stage, a de-bonding stage and a failure stage. The stress distribution in the interface controls the stability of the structure. In the elastic bonding stage, the shear stress peak point of the interface is close to the loading end, and the displacement field gradually develops into a ＂V＂ shape, in the de-bonding stage, there is a shear stress plateau in the center of the anchorage section, and shear strain localization begins to form in the deformation field. In the failure stage, the bonding of the interface fails rapidly and the shear stress peak point moves to the anchorage free end. The anchorage structure moves integrally along the macro-cracl~ The de-bonding stage is a research focus in the deformation and failure process of an anchorage structure, and plays an important guiding role in roadway support design and prediction of the stability of the surrounding rock.

Influence of Intersection Angle of Prefabricated Cracks on Impact Failure of Flattened Brazilian Disc

Both experimental and numerical approaches were used to study dynamic failure properties and patterns of flattened Brazilian discs,containing two prefabricated cracks intersected at a varying angle.Mechanism of crack initiation,propagation,and cut-through were scrutinized and influences of the intersection angle on specimen strength and acoustic emission performance were also studied.All primary cracks initialize near the middle or the tip points of the upper prefabricated crack,and they continue to develop along the load direction and finally cut through the specimen.The secondary cracks could be observed in directions almost horizontal or parallel to the directions of prefabricated cracks.Furthermore,it is found that stress intensity factor reaches its maximum for specimen with intersection angle of 0 degree.

Model for Failure Point Process of a Repairable System and Application

A engineering system is usually repairable, and failure process of a repairable by a failure point process. The power law model is a commonly used approach to model syst the em is often described failure point process. This paper introduces the concept and model for the failure process of repairable system. The method of parameter estimation is developed, and failure observations are fitted into a power-law model by using the least square method. Two applications of the pressent model are discussed according to the practical failure data of the central cooling system of a nuclear power plant. One application is determining the optimal overhaul time, and the other is evaluating the quality of maintenance. This paper provides references for the overhaul decision making and maintenance quality evaluation in reality.

Numerical Simulation on Failure Process in Brittle and Heterogeneous Matrix Filled with Randomly Distributed Particles

Based on an essential assumption of meso-heterogeneity of material, the macro characteristic of composite reinfiorced with particles, the crack initiation, propagation and the failure process in composite were studied by using a numerical code. The composite is subjected to a uniaxial tension, aact stiff or soft particles are distributed at random manner but without overlapping or contacting. The effect of reinforcement particle properties on the fracture process aact mechanism of composite with brittle matrix, furthermore, the influence of the particle volumetric fraction is also investigated. Numerical results present the different failure mode and re-produce the crack initiation, propagation aurl coalescence in brittle aurl heterogeneons matrix. The mechanism of sach failure was also elucidated.

Two-Stage Inspection Model Based on a Three-Stage Failure Process

As the non-periodic inspections are common in practice,a two-stage inspection model based on a three-stage failure process is proposed. The two-stage inspection means that the system is inspected with the first inspection interval T_1 and the second inspection interval T_2. Because of the three color schemes commonly used in industry,three stages are divided by the system lifetime:normal, minor defective and severe defective stages. Upon the failure of the system,replacement is carried out. Maintenance is done once identifying the severe defective stage. However,when the minor defective stage is identified by the second inspection interval T_2,action of halving the subsequent inspection interval is adopted.Otherwise,no action is required. Our objective function is to optimize the inspection intervals so as to minimize the expected cost per unit time. Finally,a numerical example is presented to illustrate the effectiveness of the proposed model.

RFPA Realistic Failure Process Analysis

RFPA is a numerical testing tool for realistic failure process analysis(RFPA)of rock,concrete,composites,and engineering structures.The RFPA solution offers perfect simulation tools for robust modelling of brittle material failure and engineering structural damage.The RFPA family of 2D and 3D core products offers the full depth of analysis tools—from a conceptual simulation to advanced

Experimental and numerical studies on progressive debonding of grouted rock bolts

Understanding the mechanism of progressive debonding of bolts is of great significance for underground safety.In this paper,both laboratory experiment and numerical simulation of the pull-out tests were performed.The experimental pull-out test specimens were prepared using cement mortar material,and a relationship between the pull-out strength of the bolt and the uniaxial compressive strength(UCS)of cement mortar material specimen was established.The locations of crack developed in the pull-out process were identified using the acoustic emission(AE)technique.The pull-out test was reproduced using 2D Particle Flow Code(PFC^(2D))with calibrated parameters.The experimental results show that the axial displacement of the cement mortar material at the peak load during the test was approximately 5 mm for cement-based grout of all strength.In contrast,the peak load of the bolt increased with the UCS of the confining medium.Under peak load,cracks propagated to less than one half of the anchorage length,indicating a lag between crack propagation and axial bolt load transmission.The simulation results show that the dilatation between the bolt and the rock induced cracks and extended the force field along the anchorage direction;and,it was identified as the major contributing factor for the pull-out failure of rock bolt.