The detection of hypersonic targets usually confronts range migration(RM)issue before coherent integration(CI).The traditional methods aiming at correcting RM to obtain CI mainly considers the narrow-band radar condit...The detection of hypersonic targets usually confronts range migration(RM)issue before coherent integration(CI).The traditional methods aiming at correcting RM to obtain CI mainly considers the narrow-band radar condition.However,with the increasing requirement of far-range detection,the time bandwidth product,which is corresponding to radar’s mean power,should be promoted in actual application.Thus,the echo signal generates the scale effect(SE)at large time bandwidth product situation,influencing the intra and inter pulse integration performance.To eliminate SE and correct RM,this paper proposes an effective algorithm,i.e.,scaled location rotation transform(ScLRT).The ScLRT can remove SE to obtain the matching pulse compression(PC)as well as correct RM to complete CI via the location rotation transform,being implemented by seeking the actual rotation angle.Compared to the traditional coherent detection algorithms,Sc LRT can address the SE problem to achieve better detection/estimation capabilities.At last,this paper gives several simulations to assess the viability of ScLRT.展开更多
Infrared false target is an important mean to induce the infrared-guided weapons,and the key issue is how to keep the surface temperature of the infrared false target to be the same as that of the object to be protect...Infrared false target is an important mean to induce the infrared-guided weapons,and the key issue is how to keep the surface temperature of the infrared false target to be the same as that of the object to be protected.One-dimensional heat transfer models of a metal plate and imitative material were established to explore the influences of the thermophysical properties of imitative material on the surface temperature difference（STD） between the metal plate and imitative material which were subjected to periodical ambient conditions.It is elucidated that the STD is determined by the imitative material’s dimensionless thickness（dim*,） and the thermal inertia(Pim).When dim* is above 1.0,the STD is invariable as long as Pim is a constant.And if the dimensionless thickness of metal plate（d,m*） is also larger than 1.0,the STD approaches to zero as long as Pimis the same as the thermal inertia of metal plate（Pm）.When dim* is between 0.08 and 1,the STD varies irregularly with Pim and dim*.However,if dm* is also in the range of 0.08-1,the STD approaches to zero on condition that Pim=Pm and dim*= dm*.If dim*,is below 0.08,the STD is unchanged when Pimdim* is a constant.And if dm* is also less than 0.08,the STD approaches to zero as long as Pimdim* = Pmdm*.Furthermore,an applicationoriented discussion indicates that the imitative material can be both light and thin via the application of the phase change material with a preset STD because of its high specific heat capacity during the phase transition process.展开更多
The recovery of indium from waste indium tin oxide （ITO） target has great significance for the economy and environment.Based on our previous study on the optimization of acid leaching technique,the present study foc...The recovery of indium from waste indium tin oxide （ITO） target has great significance for the economy and environment.Based on our previous study on the optimization of acid leaching technique,the present study focuses on tin removal via zinc substitution and indium recovery from a tin-free leach solution.The results show that when the amount of added zinc powder and reaction time increase,the tin removal effect can be improved.The optimal conditions obtained are as follows：additional content of zinc powder from 20 g/L to 25 g/L,reaction temperature of 60 ℃,and reaction time from 3 h to 4 h.Under this condition,the tin removal rate exceeds 98%,and the tin content in the tin removal solution is lower than 0.05 g/L.After tin removal,the substitution time could be reduced from 3-5 d to 1-2 d by neutralizing the residual acid by using alkaline residue and maintaining the pH value less than 2.The indium recovery rate is also improved when this condition is used.The indium content in the tin residue is reduced to lower than 0.1% and the acid-insoluble β-SnO2 could be obtained via the strong nitric acid leaching of the indium-containing tin residue.Indium could be recovered from ITO with a high purity of 99.995% via electrorefining.展开更多
针对延迟叠加产生密集假目标干扰存在峰均比(Peak-to-Average Power Ratio,PAPR)过高的问题,分析了现有多相序列调制法的适应性。针对其不足,提出了一种利用粒子群算法(Particle Swarm Optimization,PSO)优化干扰波形以降低峰均比的方...针对延迟叠加产生密集假目标干扰存在峰均比(Peak-to-Average Power Ratio,PAPR)过高的问题,分析了现有多相序列调制法的适应性。针对其不足,提出了一种利用粒子群算法(Particle Swarm Optimization,PSO)优化干扰波形以降低峰均比的方法。首先基于雷达发射线性调频脉冲信号,建立延迟叠加产生密集假目标干扰的信号模型。然后以最小化干扰波形的峰均比为目标函数,结合干扰调制参数约束条件形成优化问题。随后利用PSO得到干扰调制参数的次优解,最终通过仿真实验验证了所提方法的有效性。展开更多
文章研究了背景为子空间干扰加高斯杂波的距离扩展目标方向检测问题。杂波是均值为零协方差矩阵未知但具有斜对称特性的高斯杂波,目标与干扰分别通过具备斜对称特性的目标子空间和干扰子空间描述。针对方向检测问题,利用上述斜对称性,...文章研究了背景为子空间干扰加高斯杂波的距离扩展目标方向检测问题。杂波是均值为零协方差矩阵未知但具有斜对称特性的高斯杂波,目标与干扰分别通过具备斜对称特性的目标子空间和干扰子空间描述。针对方向检测问题,利用上述斜对称性,根据广义似然比检验(Generalized Likeli-hood Ratio Test,GLRT)准则的一步与两步设计方法,设计了基于GLRT的一步法与两步法的距离扩展目标方向检测器。通过理论推导证明了这2种检测器相对于未知杂波协方差矩阵都具有恒虚警率。对比相同背景下已有检测器,特别是在辅助数据有限的场景下,文章提出的2个检测器表现出了优越的检测性能。展开更多
基金supported by the National Natural Science Foundation of China(62101099)the Chinese Postdoctoral Science Foundation(2021M690558,2022T150100,2018M633352,2019T120825)+3 种基金the Young Elite Scientist Sponsorship Program(YESS20200082)the Aeronautical Science Foundation of China(2022Z017080001)the Open Foundation of Science and Technology on Electronic Information Control Laboratorythe Natural Science Foundation of Sichuan Province(2023NSFSC1386)。
文摘The detection of hypersonic targets usually confronts range migration(RM)issue before coherent integration(CI).The traditional methods aiming at correcting RM to obtain CI mainly considers the narrow-band radar condition.However,with the increasing requirement of far-range detection,the time bandwidth product,which is corresponding to radar’s mean power,should be promoted in actual application.Thus,the echo signal generates the scale effect(SE)at large time bandwidth product situation,influencing the intra and inter pulse integration performance.To eliminate SE and correct RM,this paper proposes an effective algorithm,i.e.,scaled location rotation transform(ScLRT).The ScLRT can remove SE to obtain the matching pulse compression(PC)as well as correct RM to complete CI via the location rotation transform,being implemented by seeking the actual rotation angle.Compared to the traditional coherent detection algorithms,Sc LRT can address the SE problem to achieve better detection/estimation capabilities.At last,this paper gives several simulations to assess the viability of ScLRT.
基金funded by the National Natural Science Foundation of China (No. 51576188)
文摘Infrared false target is an important mean to induce the infrared-guided weapons,and the key issue is how to keep the surface temperature of the infrared false target to be the same as that of the object to be protected.One-dimensional heat transfer models of a metal plate and imitative material were established to explore the influences of the thermophysical properties of imitative material on the surface temperature difference（STD） between the metal plate and imitative material which were subjected to periodical ambient conditions.It is elucidated that the STD is determined by the imitative material’s dimensionless thickness（dim*,） and the thermal inertia(Pim).When dim* is above 1.0,the STD is invariable as long as Pim is a constant.And if the dimensionless thickness of metal plate（d,m*） is also larger than 1.0,the STD approaches to zero as long as Pimis the same as the thermal inertia of metal plate（Pm）.When dim* is between 0.08 and 1,the STD varies irregularly with Pim and dim*.However,if dm* is also in the range of 0.08-1,the STD approaches to zero on condition that Pim=Pm and dim*= dm*.If dim*,is below 0.08,the STD is unchanged when Pimdim* is a constant.And if dm* is also less than 0.08,the STD approaches to zero as long as Pimdim* = Pmdm*.Furthermore,an applicationoriented discussion indicates that the imitative material can be both light and thin via the application of the phase change material with a preset STD because of its high specific heat capacity during the phase transition process.
基金Project(2012BAE06B01)supported by the National High Technology Research and Development Program of China
文摘The recovery of indium from waste indium tin oxide （ITO） target has great significance for the economy and environment.Based on our previous study on the optimization of acid leaching technique,the present study focuses on tin removal via zinc substitution and indium recovery from a tin-free leach solution.The results show that when the amount of added zinc powder and reaction time increase,the tin removal effect can be improved.The optimal conditions obtained are as follows：additional content of zinc powder from 20 g/L to 25 g/L,reaction temperature of 60 ℃,and reaction time from 3 h to 4 h.Under this condition,the tin removal rate exceeds 98%,and the tin content in the tin removal solution is lower than 0.05 g/L.After tin removal,the substitution time could be reduced from 3-5 d to 1-2 d by neutralizing the residual acid by using alkaline residue and maintaining the pH value less than 2.The indium recovery rate is also improved when this condition is used.The indium content in the tin residue is reduced to lower than 0.1% and the acid-insoluble β-SnO2 could be obtained via the strong nitric acid leaching of the indium-containing tin residue.Indium could be recovered from ITO with a high purity of 99.995% via electrorefining.
文摘针对延迟叠加产生密集假目标干扰存在峰均比(Peak-to-Average Power Ratio,PAPR)过高的问题,分析了现有多相序列调制法的适应性。针对其不足,提出了一种利用粒子群算法(Particle Swarm Optimization,PSO)优化干扰波形以降低峰均比的方法。首先基于雷达发射线性调频脉冲信号,建立延迟叠加产生密集假目标干扰的信号模型。然后以最小化干扰波形的峰均比为目标函数,结合干扰调制参数约束条件形成优化问题。随后利用PSO得到干扰调制参数的次优解,最终通过仿真实验验证了所提方法的有效性。
文摘文章研究了背景为子空间干扰加高斯杂波的距离扩展目标方向检测问题。杂波是均值为零协方差矩阵未知但具有斜对称特性的高斯杂波,目标与干扰分别通过具备斜对称特性的目标子空间和干扰子空间描述。针对方向检测问题,利用上述斜对称性,根据广义似然比检验(Generalized Likeli-hood Ratio Test,GLRT)准则的一步与两步设计方法,设计了基于GLRT的一步法与两步法的距离扩展目标方向检测器。通过理论推导证明了这2种检测器相对于未知杂波协方差矩阵都具有恒虚警率。对比相同背景下已有检测器,特别是在辅助数据有限的场景下,文章提出的2个检测器表现出了优越的检测性能。
