A robust optimization model for demand response management with source-grid-load collaboration to consume wind-power

To accommodate wind power as safely as possible and deal with the uncertainties of the output power of winddriven generators,a min-max-min two-stage robust optimization model is presented,considering the unit commitment,source-network load collaboration,and control of the load demand response.After the constraint functions are linearized,the original problem is decomposed into the main problem and subproblem as a matrix using the strong dual method.The minimum-maximum of the original problem was continuously maximized using the iterative method,and the optimal solution was finally obtained.The constraint conditions expressed by the matrix may reduce the calculation time,and the upper and lower boundaries of the original problem may rapidly converge.The results of the example show that the injected nodes of the wind farms in the power grid should be selected appropriately;otherwise,it is easy to cause excessive accommodation of wind power at some nodes,leading to a surge in reserve costs and the load demand response is continuously optimized to reduce the inverse peak regulation characteristics of wind power.Thus,the most economical optimization scheme for the worst scenario of the output power of the generators is obtained,which proves the economy and reliability of the two-stage robust optimization method.

Runout prediction of potential landslides based on the multi-source data collaboration analysis on historical cases

Long runout landslides involve a massive amount of energy and can be extremely hazardous owing to their long movement distance,high mobility and strong destructive power.Numerical methods have been widely used to predict the landslide runout but a fundamental problem remained is how to determine the reliable numerical parameters.This study proposes a framework to predict the runout of potential landslides through multi-source data collaboration and numerical analysis of historical landslide events.Specifically,for the historical landslide cases,the landslide-induced seismic signal,geophysical surveys,and possible in-situ drone/phone videos(multi-source data collaboration)can validate the numerical results in terms of landslide dynamics and deposit features and help calibrate the numerical(rheological)parameters.Subsequently,the calibrated numerical parameters can be used to numerically predict the runout of potential landslides in the region with a similar geological setting to the recorded events.Application of the runout prediction approach to the 2020 Jiashanying landslide in Guizhou,China gives reasonable results in comparison to the field observations.The numerical parameters are determined from the multi-source data collaboration analysis of a historical case in the region(2019 Shuicheng landslide).The proposed framework for landslide runout prediction can be of great utility for landslide risk assessment and disaster reduction in mountainous regions worldwide.

Analysis of the Application Effect of Family Collaborative Care Model on Elderly Patients with Type 2 Diabetes Mellitus and the Situation of Self-Care Ability

Objective: To study the application effect of the family collaborative care model on elderly patients with type 2 diabetes mellitus and its influence on self-care ability. Methods: The elderly type 2 diabetes mellitus patients (400 cases) treated in our hospital between March 2020 and July 2023 were divided into two groups by randomized grouping method;the control group received the conventional nursing program, while the observation group received the family collaborative nursing model. Blood glucose level, self-care ability, and quality of life were compared between the groups. Results: The blood glucose level of the observation group was lower than that of the control group (P < 0.05). The self- care ability and quality of life scores of the observation group were higher than those of the control group (P < 0.05). Conclusion: The family collaborative care model for elderly patients with type 2 diabetes mellitus can promote their self- care ability, improve the effect of glycemic control, and improve their quality of life, and is suitable for further promotion and application.

Dynamic business process modeling and verification for inter-organizational collaboration

To achieve an on-demand and dynamic composition model of inter-organizational business processes, a new approach for business process modeling and verification is introduced by using the pi-calculus theory. A new business process model which is multi-role, multi-dimensional, integrated and dynamic is proposed relying on inter-organizational collaboration. Compatible with the traditional linear sequence model, the new model is an M x N multi-dimensional mesh, and provides horizontal and vertical formal descriptions for the collaboration business process model. Finally, the pi-calculus theory is utilized to verify the deadlocks, livelocks and synchronization of the example models. The result shows that the proposed approach is efficient and applicable in inter-organizational business process modeling.

ChatModeler:基于大语言模型的人机协作迭代式需求获取和建模方法

需求获取和建模是需求工程中的关键步骤,影响后续系统设计与实现.传统的需求获取和建模方法通常由需求提供者、需求分析师等多类干系人共同协作、反复迭代完成,需要耗费大量的人力.如何减轻需求提供者与需求分析师的负担、提高获取和建模的效率有着重要意义.现有工作中有的使用知识库来提供更多知识,以辅助获取或者建模,有的利用自然语言处理等技术对获取或者建模过程进行自动化,但是它们并没有减轻需求提供者的负担.利用大语言模型(large language models,LLMs)的生成能力,提供了一种人机协作的迭代式需求获取和建模框架ChatModeler.具体来说,根据真实世界中需求团队的分工及协作关系,将部分需求提供者、需求分析师等角色的工作由大语言模型承担,而需求提供者只需要进行确认.为大语言模型扮演的各种角色进行了提示词设计,该提示词会随需求的元模型而变化.ChatModeler在7个需求案例上与3种需求模型的自动建模方法进行了14组对比实验,证明了ChatModeler在降低需求提供者的负担和生成高质量需求模型2个方面上的优越性.

Scheduling optimization for UAV communication coverage using virtual force-based PSO model

When the ground communication base stations in the target area are severely destroyed,the deployment of Unmanned Aerial Vehicle(UAV)ad hoc networks can provide people with temporary communication services.Therefore,it is necessary to design a multi-UAVs cooperative control strategy to achieve better communication coverage and lower energy consumption.In this paper,we propose a multi-UAVs coverage model based on Adaptive Virtual Force-directed Particle Swarm Optimization(AVF-PSO)strategy.In particular,we first introduce the gravity model into the traditional Particle Swarm Optimization(PSO)algorithm so as to increase the probability of full coverage.Then,the energy consumption is included in the calculation of the fitness function so that maximum coverage and energy consumption can be balanced.Finally,in order to reduce the communication interference between UAVs,we design an adaptive lift control strategy based on the repulsion model to reduce the repeated coverage of multi-UAVs.Experimental results show that the proposed coverage strategy based on gravity model outperforms the existing state-of-the-art approaches.For example,in the target area of any size,the coverage rate and the repeated coverage rate of the proposed multi-UAVs scheduling are improved by 6.9–29.1%,and 2.0–56.1%,respectively.Moreover,the proposed scheduling algorithm is high adaptable to diverse execution environments.©2022 Published by Elsevier Ltd.

User-friendly prognostic model for rectal neuroendocrine tumours: In the era of precision management

In this letter,we explore into the potential role of the recent study by Zeng et al.Rectal neuroendocrine tumours(rNETs)are rare,originate from peptidergic neurons and neuroendocrine cells,and express corresponding markers.Although most rNETs patients have a favourable prognosis,the median survival period significantly decreases when high-risk factors,such as larger tumours,poorer differentiation,and lymph node metastasis exist,are present.Clinical prediction models play a vital role in guiding diagnosis and prognosis in health care,but their complex calculation formulae limit clinical use.Moreover,the prognostic models that have been developed for rNETs to date still have several limitations,such as insufficient sample sizes and the lack of external validation.A high-quality prognostic model for rNETs would guide treatment and follow-up,enabling the precise formulation of individual patient treatment and follow-up plans.The future development of models for rNETs should involve closer collab-oration with statistical experts,which would allow the construction of clinical prediction models to be standardized and robust,accurate,and highly general-izable prediction models to be created,ultimately achieving the goal of precision medicine.

Prediction of(n,2n)reaction cross-sections of long-lived fission products based on tensor model

Interest has recently emerged in potential applications of(n,2n)reactions of unstable nuclei.Challenges have arisen because of the scarcity of experimental cross-sectional data.This study aims to predict the(n,2n)reaction cross-section of long-lived fission products based on a tensor model.This tensor model is an extension of the collaborative filtering algorithm used for nuclear data.It is based on tensor decomposition and completion to predict(n,2n)reaction cross-sections;the corresponding EXFOR data are applied as training data.The reliability of the proposed tensor model was validated by comparing the calculations with data from EXFOR and different databases.Predictions were made for long-lived fission products such as^(60)Co,^(79)Se,^(93)Zr,^(107)P,^(126)Sn,and^(137)Cs,which provide a predicted energy range to effectively transmute long-lived fission products into shorter-lived or less radioactive isotopes.This method could be a powerful tool for completing(n,2n)reaction cross-sectional data and shows the possibility of selective transmutation of nuclear waste.

Effect analysis of applying high-quality service model to surgical nursing

BACKGROUND Surgical care of the hand plays a crucial role in the medical field,as problems with the hand can profoundly affect a patient's quality of life and function.In order to meet the needs of patients,improve patient satisfaction and improve treatment outcomes,high-quality service models have been introduced in the field of nursing.AIM To explore the effect analysis of applying high-quality service model to surgical nursing.METHODS We conducted a retrospective study of patients who underwent hand surgery at our hospital between 2019 and 2022,using a quality service model that included improved patient education,pain management,care team collaboration,and effective communication.Another group of patients received traditional care as a control group.We compared postoperative recovery,satisfaction,complication rate,and length of hospital stay between the two groups.Inferential statistics were used to compare the difference between the two groups by independent sample t test,Chi-square test and other methods to evaluate the effect of intervention measures.RESULTS Postoperative recovery time decreased from 17.8±2.3 d to 14.5±2.1 d,pain score decreased from 4.7±1.9 to 3.2±1.4,and hand function score increased from 78.4±7.1 to 88.5±6.2.In terms of patient satisfaction,the quality service model group scored 87.3±5.6 points,which was significantly higher than that of the traditional care group(74.6±6.3 points).At the same time,patients'understanding of medical information also improved from 6.9±1.4 to 8.6±1.2.In terms of postoperative complications,the application of the quality service model reduced the incidence of postoperative complications from 26%to 10%,the incidence of infection from 12%to 5%,and the incidence of bleeding from 10%to 3%.The reduction in these data indicates that the quality service model plays a positive role in reducing the risk of complications.In addition,the average hospital stay of patients in the quality service model group was shortened from 6.8±1.5 d to 5.2±1.3 d,and the hospitalization cost was also reduced from 2800±600 yuan to 2500±500 yuan.CONCLUSION Applying a quality service model to hand surgery care can significantly improve patient clinical outcomes,including faster recovery,less pain,greater satisfaction,and reduced complication rates.

A Collaboration Network Model with Multiple Evolving Factors

To describe the empirical data of collaboration networks, several evolving mechanisms have been proposed, which usually introduce different dynamics factors controlling the network growth. These models can reasonably reproduce the empirical degree distributions for a number of we11-studied real-world collaboration networks. On the basis of the previous studies, in this work we propose a collaboration network model in which the network growth is simultaneously controlled by three factors, including partial preferential attachment, partial random attachment and network growth speed. By using a rate equation method, we obtain an analytical formula for the act degree distribution. We discuss the dependence of the act degree distribution on these different dynamics factors. By fitting to the empirical data of two typical collaboration networks, we can extract the respective contributions of these dynamics factors to the evolution of each networks.

A Cognitive Model for Multi-Agent Collaboration

In multi-agent system, agents work together for solving complex tasks and reaching common goals. In this paper, we propose a cognitive model for multi-agent collaboration. Based on the cognitive model, an agent architecture will also be presented. This agent has BDI, awareness and policy driven mechanism concurrently. These approaches are integrated in one agent that will make multi-agent collaboration more practical in the real world.

The Dynamic Prediction Model of Number of Participants in Software Crowd Sourcing Collaboration Development Project

Many online platforms providing crowd with opportunities to participate in software development projects have been existed for a while. Meanwhile, many enterprises are using crowd source to collaboratively develop their software via these platforms in recent years. However, some software development projects in these platforms hardly attract users to join. Therefore, these project owners need a way to effectively predict the number of participants in their projects and accordingly well plan their software and project specifications, such as the program language and the size of the documentation, in order to attract more individuals to participant in the projects. Compared with the past prediction models, our proposed model can dynamically add the factors, such as number of participants in the initial stage of the project, within the project life cycle and make the adjustment to the prediction model. The proposed model was also verified by using cross validation method. The results show that: 1) The models with the factor “the number of user participation” is more accurate than the model without it. 2) The factors of crowd dimension are more influential on the prediction accuracy than those of software project and owner dimensions. It is suggested that the project owners not only just consider those factors of the software project dimension in the initial stage of the project life cycle but also those factors of crowd and interaction dimensions in the late stage to attract more participants in their projects.

Establishing a Social Governance Model Based on Collaboration,Participation,and Common Interests:Value,Structure and Roadmap

The 19th National Congress of the Communist Party of China(CPC)put forward the proposal of establishing a social governance model based on collaboration,participation,and common interests,with the aim of developing new approaches to social governance and further modernizing China’s social system and capacity for governance.As a structuralized social relation addressing diversified governance bodies,the model has consolidated the social governance innovations achieved since the 18th CPC National Congress.Focusing on three dimensions—"value,""structure"and"roadmap,"this paper tries to interpret the value connotations and defining features behind the model and explores its development roadmap.Such a social governance model is a response to political,social and public value appeals,and an adjustment to the order of governance bodies,resource allocations and the benefit distribution structure.Its construction is a systematic and long-term project,which should aim continuously at satisfying people’s ever-higher needs,perfecting laws and regulations,cultivating a pool of specialized organizations and talents,exerting the technology advantages of the Internet in governance,and promoting socialization,legalization,specialization and intellectualization in social development.

A Work Service Model of the Ubiquitous Environment Collaboration

Office environments have recently adopted ubiquitous computing for collaboration and mobile communication to promote real-time enterprises. Ubiquitous offices, introduced by Weiser and adopted as emerging computational technology to support office works, have already affected the practice of companies and organizations. Within this context, this study deals with a work service model of the ubiquitous office environments by understanding human behaviors and works in their workspace. We propose a ubiquitous office model considering the correlation between ubiquitous computing technologies and work services in the office. Two attributes are emphasized, collaboration and mobility, as identifiers for categorizing the work types. The types of work services have variations in the amount of communication and the proportion of working outside of the office. The proposed work service model of the ubiquitous office includes territorial and non-territorial services to enable workers in and out of the office to interact with each other effectively. The findings in this paper would be a theoretical basis for embodying an intelligent office which supports office works efficiently.

Collaboration Filtering Recommendation Algorithm Based on the Latent Factor Model and Improved Spectral Clustering

Due to the development of E-Commerce, collaboration filtering (CF) recommendation algorithm becomes popular in recent years. It has some limitations such as cold start, data sparseness and low operation efficiency. In this paper, a CF recommendation algorithm is propose based on the latent factor model and improved spectral clustering (CFRALFMISC) to improve the forecasting precision. The latent factor model was firstly adopted to predict the missing score. Then, the cluster validity index was used to determine the number of clusters. Finally, the spectral clustering was improved by using the FCM algorithm to replace the K-means in the spectral clustering. The simulation results show that CFRALFMISC can effectively improve the recommendation precision compared with other algorithms.

Collaborative optimization model of renewable energy development considering peak shaving costs of various flexibility resources

China has set carbon emission goals for 2030 and 2060.Renewable energy sources,primarily wind and photovoltaic power,are being considered as the future of power generation.The major limitation to the development of new energies is the limited flexibility of regulations on power system resources,resulting in insufficient consumption capacity.Thus,the flexible resource costs for peak shaving as well as the reasonable coordinated development and operation optimization of regional renewable energy need to be considered.In this study,a renewable energy development layout configuration analysis method was established by considering the composite cost of a power system,comprehensively analyzing the potential of various flexibility regulation resources for the power system and its composite peak shaving cost,and combining renewable energy output characteristics,load forecasting,grid development,and other factors.For the optimization of various flexible resource utilization methods,a peak shaving cost estimation method from the perspective of the entire power system was established by combining the on-grid electricity prices and operating costs of different power sources.A collaborative optimization model of power system operation that aims at the lowest peak shaving cost and satisfies the constraints of operation,safety,and environmental protection was proposed.Finally,a certain area of Gansu Province was used as an example to perform detailed analysis and calculation,which demonstrated that the model has an optimal effect.This model can provide an analysis method for regional renewable energy development layout configurations and system optimization operations.

Assessing the host genetic background effects on type 2 diabetes and obesity development in response to mixed–oral bacteria and high-fat diet using the collaborative cross mouse model

Background: Host genetic background and sex, play central roles in defining the pathogenesis of type 2 diabetes(T2 D), obesity and infectious diseases. Our previous studies demonstrated the utilization of genetically highly diverse inbred mouse lines, namely collaborative cross(CC), for dissecting host susceptibility for the development of T2 D and obesity, showing significant variations following high-fat(42% fat) diet(HFD). Here, we aimed to assessing the host genetic background and sex effects on T2 D and obesity development in response to oral-mixed bacterial infection and HFD using the CC lines.Materials and Methods: Study cohort consists of 97 mice from 2 CC lines(both sexes), maintained on either HFD or Standard diet(CHD) for 12 weeks. At week 5 a group of mice from each diet were infected with Porphyromonas gingivalis(Pg) and Fusobacterium nucleatum(Fn) bacteria(control groups without infection). Body weight(BW) and glucose tolerance ability were assessed at the end time point of the experiment.Results: The CC lines varied(P <.05) at their BW gain and glucose tolerance ability(with sex effect) in response to diets and/or infection, showing opposite responses despite sharing the same environmental conditions. The combination of diet and infection enhances BW accumulation for IL1912, while restraints it for IL72. As for glucose tolerance ability, only females(both lines) were deteriorated in response to infection.Conclusions: This study emphasizes the power of the CC mouse population for the characterization of host genetic makeup for defining the susceptibility of the individual to development of obesity and/or impaired glucose tolerance.

A New Aware-Context Collaborative Filtering Approach by Applying Multivariate Logistic Regression Model into General User Pattern

Traditional collaborative filtering (CF) does not take into account contextual factors such as time, place, companion, environment, etc. which are useful information around users or relevant to recommender application. So, recent aware-context CF takes advantages of such information in order to improve the quality of recommendation. There are three main aware-context approaches: contextual pre-filtering, contextual post-filtering and contextual modeling. Each approach has individual strong points and drawbacks but there is a requirement of steady and fast inference model which supports the aware-context recommendation process. This paper proposes a new approach which discovers multivariate logistic regression model by mining both traditional rating data and contextual data. Logistic model is optimal inference model in response to the binary question “whether or not a user prefers a list of recommendations with regard to contextual condition”. Consequently, such regression model is used as a filter to remove irrelevant items from recommendations. The final list is the best recommendations to be given to users under contextual information. Moreover the searching items space of logistic model is reduced to smaller set of items so-called general user pattern (GUP). GUP supports logistic model to be faster in real-time response.

Recommendation algorithm of cloud computing system based on random walk algorithm and collaborative filtering model

The traditional collaborative filtering recommendation technology has some shortcomings in the large data environment. To solve this problem, a personalized recommendation method based on cloud computing technology is proposed. The large data set and recommendation computation are decomposed into parallel processing on multiple computers. A parallel recommendation engine based on Hadoop open source framework is established, and the effectiveness of the system is validated by learning recommendation on an English training platform. The experimental results show that the scalability of the recommender system can be greatly improved by using cloud computing technology to handle massive data in the cluster. On the basis of the comparison of traditional recommendation algorithms, combined with the advantages of cloud computing, a personalized recommendation system based on cloud computing is proposed.

A Platform for Collaborative Modeling

A collaborative virtual modeling environment based on VRML is presented as a sugarcane harvester modeling framework, and is illustrated with the implemented software that can using I;EAS, Smarteam, and Conceptual Innovation Design System （CIDS） as the supporting platform, which is powerful enough to meet the demands of different real life applications. It is possible to perform collaborative interactive modifications with concurrent synchronous visualization at each client computer with any required level of detail. The platform provides a product modeling and assembling environment, and the product data among I;EAS, Smarteam and CIDS can be exchanged.