Dynamic Visible Light Positioning Based on Enhanced Visual Target Tracking

In visible light positioning systems,some scholars have proposed target tracking algorithms to balance the relationship among positioning accuracy,real-time performance,and robustness.However,there are still two problems:(1)When the captured LED disappears and the uncertain LED reappears,existing tracking algorithms may recognize the landmark in error;(2)The receiver is not always able to achieve positioning under various moving statuses.In this paper,we propose an enhanced visual target tracking algorithm to solve the above problems.First,we design the lightweight recognition/demodulation mechanism,which combines Kalman filtering with simple image preprocessing to quickly track and accurately demodulate the landmark.Then,we use the Gaussian mixture model and the LED color feature to enable the system to achieve positioning,when the receiver is under various moving statuses.Experimental results show that our system can achieve high-precision dynamic positioning and improve the system’s comprehensive performance.

Fuzzy adaptive Kalman filter for indoor mobile target positioning with INS/WSN integrated method

Pure inertial navigation system(INS) has divergent localization errors after a long time. In order to compensate the disadvantage, wireless sensor network(WSN) associated with the INS was applied to estimate the mobile target positioning. Taking traditional Kalman filter(KF) as the framework, the system equation of KF was established by the INS and the observation equation of position errors was built by the WSN. Meanwhile, the observation equation of velocity errors was established by the velocity difference between the INS and WSN, then the covariance matrix of Kalman filter measurement noise was adjusted with fuzzy inference system(FIS), and the fuzzy adaptive Kalman filter(FAKF) based on the INS/WSN was proposed. The simulation results show that the FAKF method has better accuracy and robustness than KF and EKF methods and shows good adaptive capacity with time-varying system noise. Finally, experimental results further prove that FAKF has the fast convergence error, in comparison with KF and EKF methods.

Design and simulation of the ATP system considering the advanced targeting angle in quantum positioning system

A compensation implementation scheme of the advanced targeting process based on the fine tracking system is proposed in this paper.Based on the working process of the quantum positioning system(QPS)and its acquisition,tracking and pointing(ATP)system,the advanced targeting subsystem of the ATP system is designed.Based on six orbital parameters of the quantum satellite Mozi,the advanced targeting azimuth angle and pitch angle are transformed into the dynamic tracking center of the fine tracking system in the ATP system.The deviation of the advanced targeting process is analyzed.In the Simulink,the simulation experiment of the ATP system considering the deviation compensation of the advanced targeting is carried out,and the results are analyzed.

Automatic UAV Positioning with Encoded Sign as Cooperative Target

In order to achieve the goal that unmanned aerial vehicle(UAV)automatically positioning during power inspection,a visual positioning method which utilizes encoded sign as cooperative target is proposed.Firstly,we discuss how to design the encoded sign and propose a robust decoding algorithm based on contour.Secondly,the Adaboost algorithm is used to train a classifier which can detect the encoded sign from image.Lastly,the position of UAV can be calculated by using the projective relation between the object points and their corresponding image points.Experiment includes two parts.First,simulated video data is used to verify the feasibility of the proposed method,and the results show that the average absolute error in each direction is below 0.02 m.Second,a video,acquired from an actual UAV flight,is used to calculate the position of UAV.The results show that the calculated trajectory is consistent with the actual flight path.The method runs at a speed of 0.153 sper frame.

Far-Field Pattern Reconstruction from Positioning Errors Affected Near-Field Data Acquired via Helicoidal Scanning

In this paper, an effective technique to compensate the positioning errors in a near-field—far-field (NF-FF) transformation with helicoidal scanning for elongated antennas is presented and validated both numerically and experimentally. It relies on a nonredundant sampling representation of the voltage measured by the probe, obtained by considering the antenna as enclosed in a cylinder ended in two half-spheres. An iterative scheme is used to reconstruct the helicoidal NF data at the points fixed by the representation from the acquired irregularly spaced ones. Once the helicoidal data have been retrieved, those needed by a classical NF-FF transformation with cylindrical scanning are efficiently evaluated by using an optimal sampling interpolation algorithm. Some numerical tests, assessing the accuracy of the approach and its stability with respect to random errors affecting the data, are reported. Experimental tests performed at the Antenna Characterization Lab of the University of Salerno further confirm the validity of the proposed technique.

Metrology for sub-Rayleigh-length target positioning in~10^(22)W/cm^(2)laser-plasma experiments

Tight focusing with very small f-numbers is necessary to achieve the highest at-focus irradiances.However,tight focusing imposes strong demands on precise target positioning in-focus to achieve the highest on-target irradiance We describe several near-infrared,visible,ultraviolet and soft and hard X-ray diagnostics employed in a~10^(22)W/cm^(2)laser±plasma experiment.We used nearly 10 J total energy femtosecond laser pulses focused into an approximately1.3-μm focal spot on 5±20μm thick stainless-steel targets.We discuss the applicability of these diagnostics to determine the best in-focus target position with approximately 5μm accuracy(i.e.,around half of the short Rayleigh length)and show that several diagnostics(in particular,3ωreflection and on-axis hard X-rays)can ensure this accuracy.We demonstrated target positioning within several micrometers from the focus,ensuring over 80%of the ideal peak laser intensity on-target.Our approach is relatively fast(it requires 10±20 laser shots)and does not rely on the coincidence of low-power and high-power focal planes.

Remote positioning system based on GPS/GPRS

Considering the need of target positioning,a remote positioning system is designed based on global positioning system(GPS)and general packet radio service(GPRS);The data collection terminal is based on microcontroller unit(MCU)PIC24FV301.It uses GPRS network to create wireless link and transmits GPS source information which is collected by LEA-5H board to monitor center on the Internet.The monitor center obtains the target information through processing and analysis of the calculated data.Actual operation results indicate that the designed system has excellent performance and achieves the goal of the remote location.

Improving the target position detection in the crossed array trackers seeker using the pulses number distribution in the FOV

Seeking in a field of view(FOV) is influenced by the existence of jammers,noise,shine background or flying perturbations.All these factors may push the target out of the FOV and cause missing the target.In all the seekers the FOV is not fully exploited which means the target can be missed before becoming out of the FOV,this results of the nonlinearity of the reticle structure.In this paper,a novel method of the target position detection a crossed four slits or crossed array trackers(CAT) seeker will be designed,simulated and evaluated.The idea of this method depends on dividing the FOV into main regions up to a certain parameter,which is the pulses number;then,each main region will be divided into sub-regions up to a second parameter which will be the pulses distribution a spin period.The errors sources will be discussed and evaluated.Other new idea will be applied which is exploiting some area of the FOV where a part of the position data is missed in the information signal by pushing the target to the region where the information signal carries the total position data.

空间目标天基光学定位方法综述

近年来空间目标定位领域不断结合网络协同、多模融合等探测技术,发展迅速。其中,基于天基光学探测的定位方法以隐蔽性好、测量精度高的独特优势在民用和国防领域应用广泛。为了分析不同情景下适用于不同类型目标的定位方法,针对基于天基光学探测的空间小目标定位进行综述。首先介绍天基光学探测技术的发展、空间目标的分类和特点以及空间目标定位的概念。然后着重分析适用于空间“小、弱”目标的单星和多星定位方法,并对近年提出的异质传感器联合定位展开说明。最后,依据成像过程建立空间目标定位误差分析模型,分析定位精度的影响因素占比并根据现存问题做出总结和展望。

一种LOS环境下基于目标运动形式的TDOA定位方法

时差定位(Time Difference of Arrival,TDOA)是一种广泛应用的被动定位技术,具有定位精度高、组网能力强、系统鲁棒性强等特点。针对运动目标定位计算复杂、精度收敛较慢等问题,在给出视距(Line of Sight,LOS)环境下定位模型的基础上,提出了定位适用于多站时差定位系统的定位方法,该方法将组群时差定位关系方程合理地线性化为统计估计问题,利用在线迭代实时求解目标位置。给出了针对目标不同运动特性条件下的多平台协同定位算法及其仿真结果,仿真结果表明所述方法可以实现对目标的精确定位,并且分析了运动形式对于定位精度的影响,仿真结果对于系统的工程设计具有指导作用。

基于视频的轨道车辆自主定位方法研究

针对轨道施工车辆自主定位需求,提出一种基于车载前视相机拍摄百米标视频的轨道车辆自主定位方法。该方法首先对YOLOX-s网络进行改进并构建了百米标的目标检测模型,完成对百米标的目标检测;其次,当检测到百米标后,结合图像预处理和卷积循环神经网络(CRNN)网络构建百米标数字文本识别模型,提取百米标的数字文本信息,从而实现对轨道施工车辆的定位。经实验验证该方法能够快速准确定位轨道施工车辆的位置信息。

基于位置误差模型的机场侧向跑道碰撞风险评估

针对侧向跑道相关运行模式下航空器进离场安全间隔问题进行碰撞风险评估。为保证航空器之间的安全运行,对机场侧向跑道运行模式进行分析,计算两跑道航空器之间的动态间隔,并考虑导航误差、速度误差等因素建立位置误差碰撞风险模型。以成都天府机场侧向跑道为例,利用MATLAB软件对航空器间的碰撞风险进行仿真,并进一步得到碰撞风险值与侧向跑道汇聚交叉角度的关系。仿真结果表明:在起降相关运行模式下,当终端区航空器起始水平间隔距离为6 km,侧向跑道交叉角度为90°时,总的碰撞风险为5.14×10^(-9),满足航空器之间安全水平要求,且随着侧向跑道汇聚交叉角的增大,跑道上两架航空器的碰撞风险逐渐减小。

基于双目视觉的拖车钩检测与定位方法研究

在某些危险环境下需要拖车实施救援时,救援人员难以靠近,救援人员可以通过遥控操作拖车杠来完成拖车钩的挂装。针对被救援车辆拖车钩的检测与定位问题,提出了一种拖车钩检测与定位方法ECSA-YOLOv5,首先改进YOLOv5算法,设计了高效注意力模块ECSA,将其替换掉空间金字塔池化模块上一层的模块,并增加一个大小为160×160的小目标检测层,能够更准确的获得拖车钩在图像中的像素坐标;通过在SGBM立体匹配算法预处理阶段加入引导滤波、后处理阶段引入加权最小二乘法WLS滤波与异常值处理,从而获得更优化的视差图,得到更为准确的目标深度信息,提高拖车钩位置信息计算的精确度。基于JetsonAgxXavier开发板进行了实验验证,实验结果表明,ECSA-YOLOv5模型较YOLOv5s模型AP值提升了5.8%,达到了99.0%,平均实时检测帧率为14fps,定位测距在3m内时,误差在3.5%以下,能够满足拖车钩的检测与定位的准确性和实时性的要求。

经直肠实时组织弹性成像引导靶向穿刺在前列腺癌诊断中的应用研究

目的 探讨经直肠实时组织弹性成像(transrectal real-time tissue elastography,TRTE)引导靶向穿刺诊断前列腺癌的临床应用价值。方法 选取2020年1月至2022年12月于郑州市第一人民医院就诊的可疑前列腺癌患者52例为研究对象,术前均行经直肠常规超声及TRTE检查评估前列腺病变的良恶性,对TRTE发现可疑病灶的28例患者行TRTE引导靶向穿刺(2针)+系统穿刺(8针),对TRTE未发现可疑病灶的24例患者行直肠常规超声引导系统穿刺(12针),分析TRTE诊断前列腺癌的效能及对比分析靶向穿刺与系统穿刺的穿刺阳性率。结果 本研究最终病理确诊前列腺癌25例,良性病变27例;TRTE诊断前列腺癌28例,良性病变24例,诊断的阳性预测值、阴性预测值分别为75.0%(21/28)、83.3%(20/24)。TRTE发现可疑病灶的28例患者,靶向穿刺共56针,诊断前列腺癌36针,阳性率64.29%(36/56),系统穿刺共224针,诊断前列腺癌89针,阳性率39.73%(89/224);靶向穿刺的前列腺癌穿刺阳性率显著高于系统穿刺(P<0.05)。结论 TRTE可较好地诊断前列腺癌,其引导靶向穿刺诊断前列腺癌的阳性率更高,可在减少穿刺针数的基础上最大限度提高穿刺阳性率。

基于多维空间离散基准的目标检测网络设计

针对目标检测网络中检测头的设计缺少依据,不能对不同数据集进行相应优化的问题,用一至四维的空间离散基准和正样本点(组)分配冲突率模型,提出了相应的设计依据。即基于位置的分配原则中,针对特定数据集的正样本点在4个回归量所组成的空间维度中的分布特点,在不高于指定的分配冲突率的条件下,以减少正负样本不均衡度和系统计算资源为目的,设计出具有最少点数检测头的规律。其本质是一个回归基准编码和正负样本分配设计的过程,进而实现检测性能与资源消耗之间的平衡。得出基于卷积目标检测网络检测头的回归基准可以采用4个回归中的任意组合,但需结合样本分配策略与数据集的正样本分配冲突率进行综合设计的结论。

大口径反射镜Bipod支撑结构的装调与检测方法

随着我国遥感卫星对地观测分辨率的不断提升,空间遥感相机的有效口径逐步增大,为有效应对相机在地表装调时的重力误差干扰,大口径遥感相机的装调方式逐步从光轴水平形式转变为光轴竖直形式,与之对应的,相机主反射镜支撑结构与装配需求也在不断革新。为满足反射镜支撑与减重需求,在1 m及以上口径的反射镜支撑形式中,Bipod结构是较为常见的一种结构形式,不同于传统的框式支撑形式,它在光机结构粘接与结构位置标定需求上都有了巨大变革。为保证Bipod支撑结构下反射镜的装配定位精度和面形变化满足系统指标要求,提出了一种结合多目标空间位置转换和Stewart结构运动反演的大口径反射镜组件装调方法,该方法可在有效保证光机结构粘接点精度的同时,仅依靠反射镜自身支撑结构,实现反射镜与主承力板之间的高精度六维调节,系统装调误差可控制在0.04 mm左右。在遥感相机的实际装调过程中,通过分析主反射镜在系统中的装调误差区间,并以此为标准制定了反射镜Bipod结构的定位、粘接、调整和检测方案,实践结果表明该方法可有效控制反射镜的装配定位精度和面形误差,装调结果能够满足大口径遥感相机的系统成像需求。

自由漂浮空间机器人捕获翻滚目标的力-位-型融合控制方法

翻滚目标捕获过程中,空间机器人的运动会对基座产生扰动、接触过程的冲击碰撞容易产生安全风险。因此,为了在捕获翻滚目标的同时抑制空间机械臂对基座的扰动和对目标的碰撞冲击,提出一种自由漂浮空间机器人力-位-型融合控制方法。首先将自由漂浮空间机器人的非完整冗余性、运动冗余性表征为型空间,构建由末端位姿、型状态组合的广义状态空间并建立系统的运动学和动力学模型;通过优化基座与机械臂的位-型及零空间运动,减小机械臂抓捕运动在基座产生的扰动;通过优化基座、机械臂与翻滚目标的相对位-型,减小碰撞冲击力在基座产生的姿态扰动。给定最优位-型及末端操作力,基于阻抗控制原理及零空间投影策略,实现多优先级力-位-型融合控制。最后,开展了空间机器人捕获翻滚目标的典型任务仿真,结果表明通过力-位-型融合优化与控制方法可以有效减小空间机器人捕获过程产生的基座扰动。

城市无人机航线飞行间隔与调控频率综合研究

聚焦城市无人机航线飞行,为确保运行安全,需要为无人机配备合适的飞行间隔。面向同航线纵向飞行场景,研究了考虑冲突频率与碰撞概率且符合ICAO间隔制定原则的间隔调控模型。通过研究仅考虑无人机定位误差下的碰撞风险,得到无人机纵向飞行间隔,作为后续间隔计算的基准;通过综合考虑定位误差和速度误差引发的位置不确定性,计算伴随无人机航线飞行进程的碰撞风险。加大纵向间隔会延迟突破安全目标水平的时机,但随着飞行进程的推进,碰撞风险终将突破安全目标水平。基于此,提出了无人机位置调控机制,对2架无人机位置进行定期调控,以消除速度所产生的累积误差。针对某1个指定的安全目标水平,得到了纵向间隔与位置调控频率的关系曲线,发现二者存在博弈关系,实施高频调控,需要采取更小的航线间隔;反之,则需要加大航线间隔。同时,为兼顾城市空间与位置调控能力的双重约束,提出了选取曲率最大值位置的所需飞行间隔与调控频率作为折中方案,发现安全目标水平要求越严格,所需调控频率和飞行间隔越大。实验得到在满足安全目标水平为5×10^(-9)次/飞行小时情况下,所需调控频率为87次/h,所需纵向飞行间隔为90 m;同时在实际运行环境中,应用上述评估模型与方法可以客观选择所需间隔和调控频率。本文研究可以兼顾城市物流无人机空中运行的安全,提高城市空域利用率和派送效率。

融合注意力机制与YOLOv5s的服装领型自动检测方法

为了解决光线、人体姿势、环境噪声和拍摄设备等外部因素对服装领型检测精度的影响,提出了一种融合注意力机制与YOLOv5s的服装领型自动检测方法。首先,构建并标注了11个类别的服装领型数据集;然后,通过改变激活函数、引入注意力机制等方式对原YOLOv5s模型进行改进,提升模型检测的准确性;最后,对改进的模型进行训练、验证和测试。实验结果表明:选择FreLU作为激活函数,并把CBAM注意力机制融入到原YOLOv5s模型中,检测效果更佳;改进后的模型mAP@0.5值可达0.824,每秒能处理27.78帧图像,两项指标均优于faster RCNN和SSD512方法,表明本方法能够完成复杂背景下的服装领型自动检测任务。

伪目标迭代生成的机器人误差补偿算法

针对机器人误差模型建立后的误差补偿问题,提出一种改进的伪目标迭代算法。该算法用每次迭代中生成新的伪目标来修正关节角,从而不断减小机器人实际误差。完善了伪目标迭代算法流程,提出了5种新的不同的伪目标生成方法,分析了各种方法的特点和适用场景。结合多种伪目标生成方法提出了一种集成算法,进一步提高误差补偿精度。使用HSR-JR612机器人进行仿真实验,仿真结果表明,算法耗时在毫秒级别,补偿效果好,集成算法能进一步提高位姿补偿效果。最后使用UR10机器人与激光跟踪仪进行实验,实验结果表明,补偿后机器人末端位置误差可以减小到0.06 mm以内,姿态误差可以减小到0.025°以内。