Quantitative prediction model for the depth limit of oil accumulation in the deep carbonate rocks:A case study of Lower Ordovician in Tazhong area of Tarim Basin

With continuous hydrocarbon exploration extending to deeper basins,the deepest industrial oil accumulation was discovered below 8,200 m,revealing a new exploration field.Hence,the extent to which oil exploration can be extended,and the prediction of the depth limit of oil accumulation(DLOA),are issues that have attracted significant attention in petroleum geology.Since it is difficult to characterize the evolution of the physical properties of the marine carbonate reservoir with burial depth,and the deepest drilling still cannot reach the DLOA.Hence,the DLOA cannot be predicted by directly establishing the relationship between the ratio of drilling to the dry layer and the depth.In this study,by establishing the relationships between the porosity and the depth and dry layer ratio of the carbonate reservoir,the relationships between the depth and dry layer ratio were obtained collectively.The depth corresponding to a dry layer ratio of 100%is the DLOA.Based on this,a quantitative prediction model for the DLOA was finally built.The results indicate that the porosity of the carbonate reservoir,Lower Ordovician in Tazhong area of Tarim Basin,tends to decrease with burial depth,and manifests as an overall low porosity reservoir in deep layer.The critical porosity of the DLOA was 1.8%,which is the critical geological condition corresponding to a 100%dry layer ratio encountered in the reservoir.The depth of the DLOA was 9,000 m.This study provides a new method for DLOA prediction that is beneficial for a deeper understanding of oil accumulation,and is of great importance for scientific guidance on deep oil drilling.

Migration and accumulation mechanisms and main controlling factors of tight oil enrichment in a continental lake basin

Based on the typical dissection of various onshore tight oil fields in China,the tight oil migration and accumulation mechanism and enrichment-controlling factors in continental lake basins are analyzed through nuclear magnetic resonance(NMR)displacement physical simulation and Lattice Boltzmann numerical simulation by using the samples of source rock,reservoir rock and crude oil.In continental lake basins,the dynamic forces driving hydrocarbon generation and expulsion of high-quality source rocks are the foundational power that determines the charging efficiency and accumulation effect of tight oil,the oil migration resistance is a key element that influences the charging efficiency and accumulation effect of tight oil,and the coupling of charging force with pore-throat resistance in tight reservoir controls the tight oil accumulation and sweet spot enrichment.The degree of tight oil enrichment in continental lake basins is controlled by four factors:source rock,reservoir pore-throat size,anisotropy of reservoir structure,and fractures.The high-quality source rocks control the near-source distribution of tight oil,reservoir physical properties and pore-throat size are positively correlated with the degree of tight oil enrichment,the anisotropy of reservoir structure reveals that the parallel migration rate is the highest,and intralayer fractures can improve the migration and accumulation efficiency and the oil saturation.

The molecular mechanism of WRINKLED1 transcription factor regulating oil accumulation in developing seeds of castor bean

The transcription factor WRINKLED1(WRI1),a member of AP2 gene family that contain typical AP2 domains,has been considered as a master regulator regulating oil biosynthesis in oilseeds.However,the regulatory mechanism of RcWRI1 in regulating oil accumulation during seed development has not been clearly addressed.Castor bean(Ricinus communis)is one of the most important non-edible oil crops and its seed oils are rich in hydroxy fatty acids,widely applied in industry.In this study,based on castor bean reference genome,three RcWRIs genes(RcWRI1,RcWRI2 and RcWRI3)were identified and the expressed association of RcWRI1 with oil accumulation were determined.Heterologous transformation of RcWRI1 significantly increased oil content in tobacco leaf,confirming that RcWRI1 activate lipid biosynthesis pathway.Using DNA Affinity Purification sequencing(DAP-seq)technology,we confirmed RcWRI1 binding with Transcription Start Site of genes and identified 7961 WRI1-binding candidate genes.Functionally,these identified genes were mainly involved in diverse metabolism pathways(including lipid biosynthesis).Three cis-elements AW-box([CnTnG](n)7[CG])and AW-boxes like([GnAnC](n)6[GC]/[GnAnC](n)7[G])bound with RcWRI1 were identified.Co-expression network analysis of RcWRI1 further found that RcWRI1 might be widely involved in biosynthesis of storage materials during seed development.In particular,yeast one hybrid experiments found that both AP2 domains within RcWRI1 were required in binding targeted genes.These results not only provide new evidence to understand the regulatory mechanism of RcWRI1 in regulation of oil accumulation during castor bean seed development,but also give candidate gene resource for subsequent genetic improvement toward increasing oil content in oilseed crops.

Effects of Heat Stress during Seed Filling Stage on Brassica napus Seed Oil Accumulation and Chlorophyll Fluorescence Characteristics

As global temperature rise,the threat of heat stress to rapeseed production is becoming more obvious.Exploring the response characteristics of two important biological pathways,oil accumulation and photosynthesis,to heat stress during B.napus seed filling is helpful in the genetic improvement of heat-tolerant rapeseed.The effects of heat stress on seed oil accumulation and chlorophyll fluorescence characteristics of 29 B.napus germplasms with different oil content and environmental sensitivity,including 6 rapeseed varieties which exhibited environmentsensitive/insensitive and with high,medium or low oil content,were tested by whole plant heat stress or the in vitro silique culture system.Both assay exhibited similar trend on oil content of the rapeseed germplasms.The heat effect on the chlorophyll fluorescence kinetic parameters F_(v)/F_(m),ETR and Y(Ⅱ)were also consistent.Heat stress significantly decreased oil content,although there was abundant genetic variation on heat tolerance among the genotypes.Correlation analysis showed that the decrease rate of F_(v)/F_(m) of silique heat-stressed B.napus developing seed was positive correlative to the decrease rate of mature seed oil content of the whole plant heat-stressed rapeseed(R=0.9214,P-value<0.01).Overall,the results indicated that heat stress inhibited oil accumulation and photosynthesis in B.napus developing seed.The decrease rate of chlorophyll fluorescence parameter F_(v)/F_(m) of heat-stressed developing seed could be used as the index of heat tolerant rapeseed identification.Further,two heat insensitive rapeseed varieties with high oil content were identified.

The accumulation characteristics and exploration potential of oil and gas in the back-arc basin of Japan under the background of high heat flow

The Sea of Japan is located in the southeast margin of Eurasia, in the triangle area of the western Pacific Ocean. Due to the interaction of the Pacific plate, Eurasian plate and Philippine plate, its tectonic environment is complex, forming a typical trench-arc-basin system. At present, 148 oil and gas fields have been discovered in Japan, with an oil and gas resource of 255.78×10^(6) t, showing a good prospect for oil and gas exploration. Based on the previous research and the recently collected geological and geophysical data, the characteristics of tectonic-sedimentary evolution and geothermal field in the basins around the Sea of Japan are analyzed. The results show that the tectonic evolution of the basin is mainly controlled by plate subduction and back-arc oceanic crust expansion, and it mainly undergone four tectonic-sedimentary evolution stages: Subduction period, basin development period, subsidence period and compression deformation period. The overall heat flow value of Japan Sea is high, and it is distributed annularly along Yamato Ridge. The geothermal heat flow value is about 50–130 MW/m^(2), and the average heat flow is75.9±19.8 MW/m^(2), which has a typical “hot basin ”. The high heat flow background provides unique thermal evolution conditions for hydrocarbon generation, which leads to the high temperature and rapid evolution. The authors summarized as “early hydrocarbon generation, rapid maturity and shallow and narrow hydrocarbon generation window”. The type of oil and gas is mainly natural gas, and it mainly distributed in Neogene oil and gas reservoirs. The trap types are mainly structural traps, lithologic traps and composite traps. In addition, the pre-Neogene bedrock oil and gas reservoirs also show a good exploration prospect. The resource prospecting indicates that Niigata Basin, Ulleung Basin and kitakami Basin are the main target areas for future exploration and development.

Petroleum Retention,Intraformational Migration and Segmented Accumulation within the Organic-rich Shale in the Cretaceous Qingshankou Formation of the Gulong Sag,Songliao Basin,Northeast China

In this study,organic geochemical and petrological analyses were conducted on 111 shale samples from a well to understand the retention,intraformational migration and segmented accumulation(shale oil enrichment in different intervals is unconnected)features of shale oil within the organic-rich shale in the Qingshankou Formation of the Gulong Sag.Our study shows that retained petroleum characteristics in the investigated succession are mainly influenced by three factors:organic richness,intraformational migration and segmented accumulation.Organic matter richness primarily controls the amount of retained petroleum,especially the‘live’component indicated by the S_(2)value rather than the total organic carbon(TOC)figure alone.The negative expulsion efficiencies determined by mass-balance calculations of hydrocarbons reveal that petroleum from adjacent organic-rich intervals migrates into the interval of about 2386-2408 m,which is characterized by high free hydrocarbon(S_(1)),OSI and saturated hydrocarbons content,along with a greater difference inδ^(13)C values between polar compounds(including resins and asphaltenes)and saturated hydrocarbons.The depth-dependent heterogeneity of carbon isotope ratios(δ^(13)C)of mud methane gas,δ^(13)C of extracts gross composition(SARA),δ^(13)C of kerogen and SARA content of extracts suggest that the studied succession can be subdivided into four intervals.The shale oil sealing enrichment character in each interval is further corroborated by the distinctδ^(13)C values of mud methane gas in different intervals.Due to the migration of petroleum into the 2386-2408 m interval,the S_(1),OSI and saturated hydrocarbons content of the interval show higher relative values.The maturity of organic matter in the 2471-2500 m interval is at the highest with the smaller size molecular components of the retained petroleum.Thus,favorable‘sweet spots’may be found in the 2386-2408 m interval and the 2471-2500 m interval,according to the experiment results in this study.

Origin and accumulation of high-maturity oil and gas in deep parts of the Baxian Depression, Bohai Bay Basin, China

Great quantities of light oil and gas are produced from deep buried hill reservoirs at depths of 5,641 m to 6,027 m and 190 ℃ to 201 ℃ in the Niudong-1 Well, representing the deepest and hottest commercial hydrocarbons discovered in the Bohai Bay Basin in eastern China. This discovery suggests favorable exploration prospects for the deep parts of the basin. However, the discovery raises questions regarding the genesis and accumulation of hydrocarbons in deep reservoirs. Based on the geochemical features of the hydrocarbons and characteristics of the source rocks as well as thermal simulation experiments of hydrocarbon generation, we conclude that the oil and gas were generated from the highly mature Sha-4 Member （Es4） source rocks instead of thermal cracking of crude oils in earlier accumulations. The source kitchen with abnormal pressures and karsted carbonate reservoirs control the formation of high-maturity hydrocarbon accumulations in the buried hills （i.e., Niudong-1） in conjunction with several structural-lithologic traps in the ES4 reservoirs since the deposition of the upper Minghuazhen Formation. This means the oil and gas exploration potential in the deep parts of the Baxian Depression is probably high.

Limitation of fault-sealing and its control on hydrocarbon accumulation——An example from the Laoyemiao Oilfi eld of the Nanpu Sag

Based on previous studies on the internal structures of fault belts, the fault belts in the Laoyemiao Oilfield of the Nanpu Sag can be divided into three units, a crushed zone, an upper induced fracture zone and a lower induced fracture zone according to the log response characteristics. The upper induced fracture zone is characterized by the development of pervasive fractures and has a poor sealing or non-sealing capability. It therefore can act as pathways for hydrocarbon migration. The lower induced fracture zone consists of fewer fractures and has limited sealing capability. The crushed zone has a good sealing capability comparable to mudstone and can thus prevent lateral migration of fluid. Through physical modeling and comparing laboratory data with calculated data of oil column heights of traps sealed by faults, it is concluded that the fault-sealing capability for oil and gas is limited. When the oil column height reaches a threshold, oil will spill over from the top of reservoir along the lower induced fracture zone under the action of buoyancy, and the size of reservoir will remain unchanged. Analysis of the formation mechanisms of the fault-sealed reservoirs in the Nanpu Sag indicated that the charging sequence of oil and gas in the reservoir was from lower formation to upper formation, with the fault playing an important role in oil and gas accumulation. The hydrocarbon potential in reverse fault-sealed traps is much better than that in the consequent fault-sealed traps. The reverse fault-sealed traps are favorable and preferred exploration targets.

Whole petroleum system and hydrocarbon accumulation model in shallow and medium strata in northern Songliao Basin,NE China

Based on the oil and gas exploration practice in the Songliao Basin,combined with the latest exploration and development data such as seismic,well logging and geochemistry,the basic geological conditions,oil and gas types and distribution characteristics,reservoir-forming dynamics,source-reservoir relationship and hydrocarbon accumulation model of the whole petroleum system in shallow and medium strata in the northern part of Songliao Basin are systematically studied.The shallow-medium strata in northern Songliao Basin have the conditions for the formation of whole petroleum system,with sufficient oil and gas sources,diverse reservoir types and well-developed transport system,forming a whole petroleum system centered on the source rocks of the Cretaceous Qingshankou Formation.Different types of oil and gas resources in the whole petroleum system are correlated with each other in terms of depositional system,lithologic association and physical property changes,and they,to a certain extent,have created the spatial framework with orderly symbiosis of shallow-medium conventional oil reservoirs,tight oil reservoirs and shale oil reservoirs in northern Songliao Basin.Vertically,the resources are endowed as conventional oil above source,shale oil/tight oil within source,and tight oil below source.Horizontally,conventional oil,tight oil,interlayer-type shale oil,and pure shale-type shale oil are developed in an orderly way,from the margin of the basin to the center of the depression.Three hydrocarbon accumulation models are recognized for the whole petroleum system in northern Songliao Basin,namely,buoyancy-driven charging of conventional oil above source,retention of shale oil within source,and pressure differential-driven charging of tight oil below source.

Characteristics of Oil and Gas Accumulation in Yong'an-Meitai Area of the Fushan Depression,Beibuwan Basin,South China Sea

The Yong＇an-Meitai area is the focus of the present exploration in the Fushan Depression, Beibuwan Basin, South China Sea. All oils from this area are geochemically characterized by higher Pr/Ph ratio, higher proportion of heavy molecular weight hydrocarbons, and higher proportion of C29 regular steranes, which indicate that the organic matter of source rocks might have been deposited in an oxidizing palaeoenvironment and be dominated by higher plant organic matter input. The oil from E3w2 （the second member of Weizhou Fro. of the Oligocene） has a much higher density, relatively higher Pr/nC17 and Ph/nC18 ratios, and a ＂UCM--unresolved complex mixture＂ on gas chromatograms, which indicate that it has been slightly biodegraded. CPI and other terpane and sterane isomer ratios suggest they are all mature oils. The timing of oil charging in E3w2 and E2I1 （the first member of the Liushagang Fro. of the Eocene） determined by the homogenization temperatures of fluid inclusions and thermal evolution history are from 9-3 Ma and 8-3 Ma, respectively. Thus, the interpretation of E3w2 as a secondary reservoir is unlikely. The timing of oil charging is later than that of hydrocarbon generating and expulsion of Liushagang Fin. source rocks and trap formation, which is favorable for oil accumulation in this area. All molecular parameters that are used for tracing oil filling direction decrease with shallower burial depth, which suggests vertical oil migration. The widely occurring faults that penetrate through the source rocks of the Liushagang Fro. may serve as a fine oil charging conduit.

In-situ hydrocarbon formation and accumulation mechanisms of micro- and nano-scale pore-fracture in Gulong shale, Songliao Basin, NE China

By conducting experimental analyses, including thermal pyrolysis, micro-/nano-CT, argon-ion polishing field emission scanning electron microscopy (FE-SEM), confocal laser scanning microscopy (CLSM), and two-dimensional nuclear magnetic resonance (2D NMR), the Gulong shale oil in the Songliao Basin was investigated with respect to formation model, pore structure and accumulation mechanism. First, in the Gulong shale, there are a large number of pico-algae, nano-algae and dinoflagellates, which were formed in brackish water environment and constituted the hydrogen-rich oil source materials of shale. Second, most of the oil-generating materials of the Qingshankou Formation shale exist in the form of organo-clay complex. During organic matter thermal evolution, clay minerals had double effects of suppression and catalytic hydrogenation, which expanded shale oil window and increased light hydrocarbon yield. Third, the formation of storage space in the Gulong Shale was related to dissolution and hydrocarbon generation. With the diagenesis, micro-/nano-pores increased, pore diameter decreased and more bedding fractures appeared, which jointly gave rise to the unique reservoir with dual media (i.e. nano-scale pores and micro-scale bedding fractures) in the Gulong shale. Fourth, the micro-/nano-scale oil storage unit in the Gulong shale exhibits independent oil/gas occurrence phase, and shows that all-size pores contain oils, which occur in condensate state in micropores or in oil-gas two phase (or liquid) state in macropores/mesopores. The understanding about Gulong shale oil formation and accumulation mechanism has theoretical and practical significance for advancing continental shale oil exploration in China.

Discussion of the Mode and Mechanism of Oil and Gas Accumulation in the Nanbaxian Pool in the North of the Qaidam Basin

Because of the difference ofoil and gas accumulation condition between the hanging wall and the footwall of a fault, there is a peculiar accumulation mechanism that oil and gas mainly exists in the hanging wall of the basement fault, but in the footwall of the shallow detachment fault in the Nanbaxian pool. The oil and gas of the Nanbaxian pool came from the mature Jurassic hydrocarbon source rock of the Yibei depression located at the south of the Nanbaxian pool. Firstly, the oil and gas accumulated in the traps of the hanging wall of the basement fault by way of the unconformity and the basement faults, and turned into some primary deep pools; and then, the shallow detachment fault that formed in the later tectonic movement broke into the deep primary pools, which caused the oil and gas migration upwards along the basement faults and the shallow detachment faults and the evolvement into some secondary oil and gas pools later. The history of the Nanbaxian oil and gas accumulation can be summarized successively as the syndepositional upheaval controlled by faults; single hydrocarbon source rock; unconformities and faults as migration channels; buoyancy, overpressure and tectonic stress as dynamic forces; multistage migration and accumulation of oil and gas; and finally an overlapped double-floor pattern of oil and gas accumulation. The most important explorative targets in the north of the Qaidam Basin are traps connected with the primary pools in the footwall by shallow detachment faults.

Evolution of Hydrodynamic Field, Oil-Gas Migration and Accumulation in Songliao Basin, China

The oil-gas migration and accumulation in the Songliao Basin were analyzed in the view of fluid dynamics by the authors. The key point of fluid dynamics is hydrodynamics. Oil-gas migration and accumulation are related closely with formation and evolution of hydrodynamic field. Based on abundant data, initial formation pressure and other parameters, such as water head were studied. They can be used to understand the present distribution of hydrodynamic field and its hydrochemical features. Generally, the hydrodynamic field in the basin is obviously asymmetrical. In its north and east part, there are the areas of centripetal flow caused by topographic relief when meteoric water permeate downwards. Its south part is an evaporation-concentration area. The central depression is an area of centrifugal flow driven by sediment compaction and its cross-formational flow area. Only at the basin margin and in the local uplifted and denudated area are the meteoric water permeating downwards areas. The centrifugal flow driven by sediment compaction is the main dynamic factor that induces oil-gas migration and accumulation and its formation period corresponding to the main stage of oil-gas migration and accumulation. Moreover, the evolution of hydrodynamic field has the cyclic property, which results in phased oil-gas migration by stages, and further dominates the terraced annular oil and gas distribution, concentric with their corresponding sags.

The coupling of dynamics and permeability in the hydrocarbon accumulation period controls the oil-bearing potential of low permeability reservoirs:a case study of the low permeability turbidite reservoirs in the middle part of the third member of Shahejie

The relationships between permeability and dynamics in hydrocarbon accumulation determine oil- bearing potential （the potential oil charge） of low perme- ability reservoirs. The evolution of porosity and permeability of low permeability turbidite reservoirs of the middle part of the third member of the Shahejie Formation in the Dongying Sag has been investigated by detailed core descriptions, thin section analyses, fluid inclusion analyses, carbon and oxygen isotope analyses, mercury injection, porosity and permeability testing, and basin modeling. The cutoff values for the permeability of the reservoirs in the accumulation period were calculated after detailing the accumulation dynamics and reservoir pore structures, then the distribution pattern of the oil-bearing potential of reservoirs controlled by the matching relationship between dynamics and permeability during the accumulation period were summarized. On the basis of the observed diagenetic features and with regard to the paragenetic sequences, the reservoirs can be subdivided into four types of diagenetic facies. The reservoirs experienced two periods of hydro- carbon accumulation. In the early accumulation period, the reservoirs except for diagenetic facies A had middle to high permeability ranging from 10 × 10-3 gm2 to 4207 × 10-3 lain2. In the later accumulation period, the reservoirs except for diagenetic facies C had low permeability ranging from 0.015 × 10-3 gm2 to 62× 10-3 -3m2. In the early accumulation period, the fluid pressure increased by the hydrocarbon generation was 1.4-11.3 MPa with an average value of 5.1 MPa, and a surplus pressure of 1.8-12.6 MPa with an average value of 6.3 MPa. In the later accumulation period, the fluid pressure increased by the hydrocarbon generation process was 0.7-12.7 MPa with an average value of 5.36 MPa and a surplus pressure of 1.3-16.2 MPa with an average value of 6.5 MPa. Even though different types of reservoirs exist, all can form hydrocarbon accumulations in the early accumulation per- iod. Such types of reservoirs can form hydrocarbon accumulation with high accumulation dynamics; however, reservoirs with diagenetic facies A and diagenetic facies B do not develop accumulation conditions with low accumu- lation dynamics in the late accumulation period for very low permeability. At more than 3000 m burial depth, a larger proportion of turbidite reservoirs are oil charged due to the proximity to the source rock, Also at these depths, lenticular sand bodies can accumulate hydrocarbons. At shallower depths, only the reservoirs with oil-source fault development can accumulate hydrocarbons. For flat surfaces, hydrocarbons have always been accumulated in the reservoirs around the oil-source faults and areas near the center of subsags with high accumulation dynamics.

Accumulation contribution differences between lacustrine organic-rich shales and mudstones and their significance in shale oil evaluation

The differences in organic matter abundance and rock composition between shale and mudstone determine the discrepancy of their contributions to the formation of conventional and shale oil/gas reservoirs.The evaluation criteria of source rocks are different in the future exploration in self-sourced petroleum systems.Shales are deposited in deep/semi-deep lacustrine,with low sedimentation rate and chemical depositions of various degrees,while mudstones are mostly formed in shallow lacustrine/lakeside,with high deposition rate and density flow characteristics.Three factors contribute to the enrichment of organic matter in shales,including the"fertility effect"caused by volcanic ash deposition and hydrothermal injection,excessive and over-speed growth of organisms promoted by radioactive materials,and deep-water anaerobic environment and low sedimentation rate to protect the accumulation of organic matter from dilution.Lamellations in shales are easy to be stripped into storage space,and acid water produced during hydrocarbon generation can dissolve some particles to generate new pores.The massive mudstones with high clay content are of poor matrix porosity.Shales with high total organic carbon,developed laminations,relatively good reservoir property,and high brittle mineral content,are the most favorable lithofacies for shale oil exploration and development.It is necessary to conduct investigation on the differences between shale and mudstone reservoirs,to identify resources distribution in shale and mudstone formations,determine the type and standard of"sweet-spot"evaluation parameters,optimize"sweet-spot areas/sections",and adopt effective development technologies,which is of great significance to objectively evaluate the total amount and economy of shale oil resources,as well as the scale of effective exploitation.

Geochronological Records of Oil-Gas Accumulations in the Permian Reservoirs of the Northeastern Ordos Basin

Geochronology of oil-gas accumulation （OGA） is a challenging subject of petroleum geology in multi-cycle superimposed basins.By K-Ar dating of authigenic illite （AI） and fluid inclusion （FI） analysis combined with apatite fission track （AFT） thermal modeling,a case study of constraining the OGA times of the Permian reservoirs in northeast Ordos basin （NOB） has been conducted in this paper.AI dating of the Permian oil-gas-bearing sandstone core-samples shows a wide time domain of 178-108 Ma.The distribution of the AI ages presents 2-stage primary OGA processes in the Permian reservoirs,which developed in the time domains of 175-155 Ma and 145-115 Ma with 2-peak ages of 165 Ma and 130 Ma,respectively.The FI temperature peaks of the samples and their projected ages on the AFT thermal path not only present two groups with a low and a high peak temperatures in ranges of 90-78℃ and 125-118℃,respectively corresponding to 2-stage primary OGA processes of 162-153 Ma and 140-128 Ma in the Permian reservoirs,but also appear a medium temperature group with the peak of 98℃ in agreement with a secondary OGA process of c.～30 Ma in the Upper Permian reservoirs.The integrated analysis of the AI and FI ages and the tectono-thermal evolution reveals that the Permian reservoirs in the NOB experienced at least 2-stage primary OGA processes of 165-153 Ma and 140-128 Ma in agreement with the subsidence thermal process of the Mid-Early Jurassic and the tectono-thermal event of the Early Cretaceous.Then,the Upper Permian reservoirs further experienced at least 1-stage secondary OGA process of c.～30 Ma in coincidence with a critical tectonic conversion between the slow and the rapid uplift processes from the Late Cretaceous to Neogene.

The origin and accumulation model of crude oils from oil reservoirs Chang 9 and Chang 10 in the Yanchang Formation of the Ordos Basin

In the lower parts of oil reservoirs Chang 9 and Chang 10 of the Yanchang Formation are oil-bearing layers newly found in oil exploration in the Ordos Basin.Based on GC,GC-MS analyses of saturated hydrocarbons from crude oils and source rocks,reservoir fluid inclusions and BasinMod,the origin of crude oils,accumulation period and accumulation models are discussed in combination with other petroleum geology data in this paper.The result shows that(1) there are two different types of crude oils in oil reservoir Chang 9 in the Longdong and Jiyuan regions:crude oils of typeⅠ(Well D86,Well A44,Well A75,Well B227,Well X62 and Well Z150) are mainly de-rived from the Chang 7 source rocks(including mudstones and shales) and distributed in the Jiyuan and Longdong regions;those of typeⅡ(Well Z14 and Well Y427),are distributed in the Longdong region,which are derived from the Chang 9 source rocks.Crude oils from oil reservoir Chang 10 in the Shanbei region are mainly derived from the Chang-9 source rocks;(2) there are two phases of hydrocarbon filling in oil reservoir Chang 9 in the Jiyuan and Longdong regions and oil reservoir Chang 10 in the Shanbei region:The first phase started at the early stage of J2z.The process of hydrocarbon filling was discontinuous in the Late Jurassic,because of the tectonic-thermal event in the Ordos Basin.The second phase was the main accumulation period,and hydrocarbons began to accumulate from the late stage of J2a to the middle-late of K1,mainly at the middle-late stage of K1;(3) there exist two types of accu-mulation models in oil reservoirs Chang 9 and Chang 10 of the Yanchang Formation:source rocks of the reservoirs in oil reservoir Chang 9 in the Jiyuan region and oil reservoir Chang 10 in the Shanbei region,the mixed type of reservoirs on the lateral side of source rocks and source rocks of the reservoirs in oil reservoir Chang 9 in the Long-dong region.

Oil and fatty acid accumulation during coriander (Coriandrum sativum L.) fruit ripening under organic cultivation

To evaluate the accumulation of oil and fatty acids in coriander during fruit ripening, a field experiment was conducted under organic cultivation conditions in Auch(near Toulouse,southwestern France) during the 2009 cropping season. The percentage and composition of the fatty acids of coriander were determined by gas chromatography. Our results showed that rapid oil accumulation started in early stages(two days after flowering, DAF). Twelve fatty acids were identified. Saturated and polyunsaturated acids were the dominant fatty acids at earlier stages(2–12 DAF), but decreased after this date. After this stage,petroselinic acid increased to its highest amount at 18 DAF. In contrast, palmitic acid followed the opposite trend. Saturated and polyunsaturated fatty acids decreased markedly and monounsaturated fatty acids increased during fruit maturation. It appears that the fruit of coriander may be harvested before full maturity.

SIMULATION AND APPLICATION OF THREE_DIMENSIONAL MIGRATION_ACCUMULATION OF OIL RESOURCES

Numerical simulation of oil migration and accumulation is to describe the history of oil migration and accumulation in basin evolution. It is of great value in the exploration of oil resources and their rational evaluation. In this paper, from such actual conditions as the effects of mechanics of fluids in porous media and 3-dimensional geology characteristics, a kind of modified method of second order splitting-up implicit interactive scheme is pur forward. For the famous hydraulic experiment of secondary migration-accumulation, the numerical simulation test has been done, and both the computational and experimental results are basically identical. For the actual problem of Dongying hollow of Shengli Petroleum Oil Field, the numerical simulation test and the actual conditions are basically coincident. Thus the well-known problem has been solved.

Source and accumulation process of Jurassic biodegraded oil in the Eastern Junggar Basin,NW China

Biodegradation usually obscures or even radically alters the original characteristics of oil biomarkers.The mixing of oil from multiple sources makes each source difficult to trace.Identifying the source of biodegraded oil from multiple sources has always been a hard nut to crack.Rising to this challenge,in this study-we carried out a comprehensive investigation of biodegradation impacts,oil-source correlation,and oil charging history to trace the source and reveal the mixing process of biodegraded oil in the Toutunhe Formation(J_(2)t)in the eastern Junggar Basin,NW China.The oil of this area was biodegraded to different extent,consequently,many commonly used biomarker parameters(e.g.Pr/Ph,Pr/n C_(17))became less powerful for oil-source correlation.To address this problem,the resistance of many biomarkers to biodegradation was analyzed,and those of high bio resistance were selected to generate a more reliable oil-source correlation.The results revealed that biodegraded oil was a mixture of oil sourced from Lucaogou Formation(P_(2)l)and Xiaoquangou Formation(T_(2-3)xq).Core sample observation,microscopic fluorescent analysis and fluid inclusion analysis were combined to analyze comprehensively oil charging history.The analysis of accumulation process exhibited that the existing oil in J_(2)t was a mixture originated from the P_(2)l and T_(2-3)xq source rocks in two separate charging stages when it underwent a complicated process of charging,biodegradation,recharging and mixing.