CO_(2) electrolysis to formic acid for carbon neutralization

To avoid carbonate precipitation for CO_(2) electrolysis,developing CO_(2) conversion in an acid electrolyte is viewed as an ultimately challenging technology.In Nature,Xia et al.recently explored a proton-exchange membrane system for reducing CO_(2) to formic acid with a Pb±Pb SO_(4) composite catalyst derived from waste lead-acid batteries based on the lattice carbon activation mechanism.Up to 93%Faradaic efficiency was realized when formic acid was produced by this technology.

Rational design of Cu-based electrocatalysts for electrochemical reduction of carbon dioxide

The recent development of Cu-based electrocatalysts for electrochemical reduction of carbon dioxide（CO） has attracted much attention due to their unique activity and selectivity compared to other metal catalysts. Particularly, Cu is the unique electrocatalyst for COelectrochemical reduction with high selectivity to generate a variety of hydrocarbons. In this review, we mainly summarize the recent advances on the rational design of Cu nanostructures, the composition regulation of Cu-based alloys, and the exploitation of advanced supports for improving the catalytic activity and selectivity toward electrochemical reduction of CO. The special focus is to demonstrate how to enhance the activity and selectivity of Cubased electrocatalyst for COreduction. The perspectives and challenges for the development of Cu-based electrocatalysts are also addressed. We hope this review can provide timely and valuable insights into the design of advanced electrocatalytic materials for COelectrochemical reduction.

Gas-phase electrocatalytic reduction of carbon dioxide using electrolytic cell based on phosphoric acid-doped polybenzimidazole membrane

Carbon dioxide transformation to fuels or chemicals provides an attractive approach for its utilization as feedstock and its emission reduction. Herein, we report a gas-phase electrocatalytic reduction of CO2 in an electrolytic cell, constructed using phosphoric acid-doped polybenz- imidazole （PBI） membrane, which allowed operation at 170 ℃ Pt/C and PtMo/C with variable ratio of Pt/Mo were studied as the cathode catalysts. The results showed that PtMo/C catalysts significantly enhanced CO formation and inhibited CH4 formation compared with Pt/C catalyst. Characterization by X-ray diffraction, X-ray photoelectron spectroscopy and transmission electron microscopy revealed that most Mo species existed as MoO3 in PtMo/C catalysts and the interaction between Pt and MoOx was likely responsible for the enhanced CO formation rate although these bicomponent catalysts in general had a larger particle size than Pt/C catalyst.

Surface composition dominates the electrocatalytic reduction of CO2 on ultrafine CuPd nanoalloys

Preciously tuning the surface composition of noble metal nanoparticles with the particle size of only 2 nm or less by alloying with other metals represents a powerful strategy to boost their electrocatalytic selectivity.However,the synthesis of ultrafine nanoalloys and tuning their surface composition remain challenging.In this report,ultrafine CuPd nanoalloys with the particle size of ca.2 nm are synthesized based on the galvanic replacement reaction between presynthesized Cu nanoparticles and Pd2+precursors,and the tuning of their surface compositions is also achieved by changing the atom ratios of Cu/Pd.For the electrocatalytic reduction of CO2,Cu5Pd5 nanoalloys show the CO Faradaic efficiency(FE)of 88%at−0.87 V,and the corresponding mass activity reaches 56 A/g that is much higher than those of Cu8Pd2 nanoalloys,Cu3Pd7 nanoalloys and most of previously reported catalysts.Density functional theory uncovers that with the increase of Pd on the surface of the ultrafine CuPd nanoalloys,the adsorbed energy of both of intermediate COOH*and CO*to the Pd sites is strengthened.The Cu5Pd5 nanoalloys with the optimal surface composition better balance the adsorption of COOH*and desorption of CO*,achieving the highest selectivity and activity.The difficult liberation of absorbed CO*on the surface of Cu3Pd7 nanoalloys provides carbon source to favor the production of ethylene,endowing the Cu3Pd7 nanoalloys with the highest selectivity for ethylene among these ultrafine CuPd nanoalloys.

Recent update on electrochemical CO_(2)reduction catalyzed by metal sulfide materials

Seeking and developing efficient CO_(2)reduction reaction(CO_(2)RR)electrocatalysts is a hot topic in this era of global warming.Among material candidates for sustainable and cost-effective applications,metal sulfides have attracted attention as promising nature-inspired materials due to multiple adsorption sites which are enhanced by the covalent character of sulfur.This article summarizes the current status regarding the utilization and development of metal sulfide materials as CO_(2)RR electrocatalysts.First,the research background and basic principles of electrochemical CO_(2)RR are introduced.Next,an overview of the main obstacles to developing efficient CO_(2)RR electrocatalysts is presented.The section is followed by a summary of the empirical evidence supporting the application of metal sulfides as CO_(2)RR electrocatalysts beside nature-inspired motivation.The summary of synthesis methods of various metal sulfides is also presented.Furthermore,the paper also highlights the recent works on metal sulfide as efficient CO_(2)RR including the undertaking strategy on the activity enhancement,and finally,discusses the challenges and prospect of metal sulfides-based CO_(2)RR electrocatalysts.Despite recent efforts,metal sulfides remain relatively unexplored as materials for CO_(2)RR electrocatalytic applications.Therefore,this review aims to stimulate novel ideas and research for improved catalyst designs and functionality.

The role of morphology on the electrochemical CO_(2) reduction performance of transition metal-based catalysts

The continued increase in population and the industrial revolution have led to an increase in atmospheric carbon dioxide(CO_(2)) concentration. Consequently, developing and implementing effective solutions to reduce CO_(2) emissions is a global priority. The electrochemical CO_(2) reduction reaction(CO_(2)RR) is strongly believed to be a promising alternative to fossil fuel-based technologies for the production of value-added chemicals. So far, the implementation of CO_(2)RR is hindered by associated electrochemical reactions, such as low selectivity, hydrogen evolution reaction(HER), and additional overpotential induced in some cases. As a result, it is necessary to conduct a timely evaluation of the state-of-the-art strategies in CO_(2)RR, with a focus on the engineering of the electrocatalytic systems. Catalyst morphology is one factor that plays a critical role in overcoming these drawbacks and significantly contributes to enhancing product selectivity and Faradaic efficiency(FE). This review article summarizes the recent advances in the rational design of electrocatalysts with various morphologies and the influence of these morphologies on CO_(2)RR. To compare literature findings in a meaningful way, the article focuses on results reported under a well-defined period and considers the first three rows of the d-block metal catalysts. The discussion typically covers the design of nanostructured catalysts and the molecular-level understanding of morphology-performance relationship in terms of activity, selectivity, and stability during CO_(2) electrolysis. Among others, it would be convenient to recommend a comprehensive discussion on the morphologies of single metals and heterostructures, with a detailed emphasis on their impact on CO_(2) conversion.

In operando-formed interface between silver and perovskite oxide for efficient electroreduction of carbon dioxide to carbon monoxide

Electrochemical carbon dioxide(CO_(2))reduction(ECR)is a promising technology to produce valuable fuels and feedstocks from CO_(2).Despite large efforts to develop ECR catalysts,the investigation of the catalytic performance and electrochemical behavior of complex metal oxides,especially perovskite oxides,is rarely reported.Here,the inorganic perovskite oxide Ag-doped(La_(0.8)Sr_(0.2))_(0.95)Ag_(0.05)MnO_(3-δ)(LSA0.05M)is reported as an efficient electrocatalyst for ECR to CO for the first time,which exhibits a Faradaic efficiency(FE)of 84.3%,a remarkable mass activity of 75Ag^(-1)(normalized to the mass of Ag),and stability of 130 h at a moderate overpotential of 0.79 V.The LSA0.05M catalyst experiences structure reconstruction during ECR,creating the in operando-formed interface between the perovskite and the evolved Ag phase.The evolved Ag is uniformly distributed with a small particle size on the perovskite surface.Theoretical calculations indicate the reconstruction of LSA0.05M during ECR and reveal that the perovskite-Ag interface provides adsorption sites for CO_(2) and accelerates the desorption of the*CO intermediate to enhance ECR.This study presents a novel high-performance perovskite catalyst for ECR andmay inspire the future design of electrocatalysts via the in operando formation of metal-metal oxide interfaces.

Recent progress and prospects of electrolytes for electrocatalytic nitrogen reduction toward ammonia

Electrochemical nitrogen reduction reaction(ENRR) provides a promising strategy to achieve sustainable synthesis of ammonia. However, despite great efforts devoted to this research field, the problems such as low energy efficiency and weak selectivity still impede its practical implementation. Most of the research to date has been concentrated on creating sophisticated electrocatalysts, and adequate knowledge of electrolytes is still lacking. Herein, the recent progress in electrolytes for ENRR, including alkaline, neutral,acidic, water-in-salt, organic, ionic liquid, and mixed water-organic electrolytes, is thoroughly reviewed to obtain an in-depth understanding of their effects on electrocatalytic performance. Recently developed representative electrocatalysts in various types of electrolytes are also introduced, and future research priorities of different electrolytes are proposed to develop new and efficient ENRR systems.

Ru-Ni alloy nanosheets as tandem catalysts for electrochemical reduction of nitrate to ammonia

Developing electrocatalysts that exhibit both high activity and ammonia selectivity for nitrate reduction is a significant and demanding challenge,primarily due to the complex nature of the multiple-electron reduction process involved.An encouraging approach involves coupling highly active precious metals with transition metals to enhance catalytic performance through synergy.Here,we report a ruthenium-nickel alloy catalyst with nanosheets(Ru-Ni NSs)structure that achieves a remarkable ammonia Faradaic efficiency of approximately 95.93%,alongside a yield rate of up to 6.11 g·h^(−1)·cm^(−2).Moreover,the prepared Ru-Ni NSs exhibit exceptional stability during continuous nitrate reduction in a flow reactor for 100 h,maintaining a Faradaic efficiency of approximately 90%and an ammonia yield of 37.4 mg·L^(−1)·h^(−1)using 0.05 M nitrate alkaline electrolyte.Mechanistic studies reveal that the catalytic process follows a two-step pathway,in which HONO serves as a migration intermediate.The presence of a partially oxidized Ru(002)surface enhances the adsorption of nitrate and facilitates the release of the migration intermediate by adjusting the strength of the electrostatic and covalent interactions between the adsorbate and the surface,respectively.On the other hand,the Ni(111)surface promotes the utilization of the migration intermediate and requires less energy for NH_(3)desorption.This tandem process contributes to a high catalytic activity of Ru-Ni NSs towards nitrate reduction.

Aqueous electrocatalytic N2 reduction under ambient conditions

Recently, the electrochemical N2 reduction reaction （NRR） in aqueous electrolytes at ambient temperature and pressure has demonstrated its unique advantages and potentials. The reactants are directly derived from gaseous N2 and water, which are naturally abundant, and NH3 production is important for fertilizers and other industrial applications. To improve the conversion yield and selectivity （mainly competing with water reduction）, electrocatalysts must be rationally designed to optimize the mass transport, chemisorption, and transduction pathways of protons and electrons. In this review, we summarize recent progress in the electrochemical NRR. Studies of electrocatalyst designs are summarized for different categories, including metal-based catalysts, metal oxide-derived catalysts, and hybrid catalysts. Strategies for enhancing the NRR performance based on the facet orientation, metal oxide interface, crystallinity, and nitrogen vacancies are presented. Additional system designs, such as lithium-nitrogen batteries, and the solvent effect are introduced. Finally, existing challenges and prospects are discussed.

Engineering of electrocatalyst/electrolyte interface for ambient ammonia synthesis

Ammonia is not only an important platform chemical for industrial and agri-cultural use but is also a novel energy-carrying molecule.The electrochemical reduction method for ambient ammonia synthesis is emerging as a promising strategy for the replacement of the current Haber–Bosch ammonia synthesis method,which consumes a large amount of energy and natural gas(hydrogen resource)while releasing substantial greenhouse gases(eg,carbon dioxide).The challenges in electrochemical ammonia synthesis,also known as nitrogen reduc-tion reaction,primarily include the cleavage of extremely stable N≡N bonds and the competitive hydrogen evolution reaction in routine aqueous media,which significantly leads to a low production rate and Faradaic efficiency.The ratio-nal design and engineering of the electrocatalyst/electrolyte interface are crucial to address these challenges.Herein,recent achievements for catalyst/electrolyte interface engineering are reviewed to provide insights into enhancing the pro-duction rate and Faradaic efficiency.Perspectives on future research and devel-opment of the electrochemical ammonia synthesis from theory to practice will be provided.