Two-dimensional(2D)materials have recently provided a new perspective on optoelectronics because of their unique layered structure and excellent physical properties.However,their potential use as optoelectric devices ...Two-dimensional(2D)materials have recently provided a new perspective on optoelectronics because of their unique layered structure and excellent physical properties.However,their potential use as optoelectric devices has been limited by the trade-off between photoresponsivity and response time.Here,based on a vertically stacked atomically thin p-n junction,we propose a gap-mode plasmon structure that simultaneously enables enhanced responsivity and rapid photodetection.The atomically thin 2D materials act as a spacer for enhancing the gap-mode plasmons,and their short transit length in the vertical direction allows fast photocarrier transport.We demonstrate a high responsivity of up to 8.67 A/W with a high operation speed that exceeds 35 MHz under a 30 nW laser power.Spectral photocurrent,absorption,and a numerical simulation are used to verify the effectiveness of the gap-mode plasmons in the device.We believe that the design strategy proposed in this study can pave the way for a platform to overcome the trade-off between responsivity and response time.展开更多
Two novel decyloxyphenylquinoxaline-based donor-acceptor (D-A) electroactive monomers bearing dialkoxythiophene as the donor unit are synthesized using Stille coupling reaction. The corresponding polymers, poly[2,3-...Two novel decyloxyphenylquinoxaline-based donor-acceptor (D-A) electroactive monomers bearing dialkoxythiophene as the donor unit are synthesized using Stille coupling reaction. The corresponding polymers, poly[2,3- bis(4-decyloxyphenyl)-5,8-bis(3,4-dimethoxylthiophen-2-yl)quinoxaline] (P1) and poly[2,3-bis(4-decyloxyphenyl)-5,8- bis(2,3-dihydrothieno[3,4-b][1,4]dioxin-5-yl)quinoxaline] (P2), are directly deposited onto the working electrode surface by electropolymerization. All materials were characterized by nuclear magnetic resonance (NMR), mass spectrometry (MS), scanning electron microscopy (SEM), cyclic voltammetry (CV), ultraviolet-visible absorption spectrometry (UV-Vis) and spectro-electrochemical measurements. Electrochemical studies demonstrate that both polymers are capable of showing both reasonable n- and p-doping processes, and advanced long-term switching stabilities. 3,4-Ethylenedioxythiophene substituted for 3,4-dimethoxythiophene as a donor unit, which enhances the conjugated double-bond character of the conducting polymer, thus leading to a lower electronic band-gap. Likewise, the neutral state color of the synthesized polymer tuned from blue to blue-green corresponding to the red shift of the maximum absorption wavelengths in the visible region. In addition, kinetics study of P1 revealed 42% (595 nm), 30% (839 nm) and 69% (1500 nm) transmittance changes (A7%), while P2 exhibited 32% (740 nm), 71% (2000 nm) at the dominant wavelengths. It was also observed that both films could switch quickly between the neutral state and oxidation state, with the response time less than 1 s both in visible and near infrared regions.展开更多
基金This work was supported by the National Research Foundation of Korea(NRF)through Basic Research Program(No.2019R1A2C2009171)Creative Materials Discovery Program(No.2016M3D1A1900035).
文摘Two-dimensional(2D)materials have recently provided a new perspective on optoelectronics because of their unique layered structure and excellent physical properties.However,their potential use as optoelectric devices has been limited by the trade-off between photoresponsivity and response time.Here,based on a vertically stacked atomically thin p-n junction,we propose a gap-mode plasmon structure that simultaneously enables enhanced responsivity and rapid photodetection.The atomically thin 2D materials act as a spacer for enhancing the gap-mode plasmons,and their short transit length in the vertical direction allows fast photocarrier transport.We demonstrate a high responsivity of up to 8.67 A/W with a high operation speed that exceeds 35 MHz under a 30 nW laser power.Spectral photocurrent,absorption,and a numerical simulation are used to verify the effectiveness of the gap-mode plasmons in the device.We believe that the design strategy proposed in this study can pave the way for a platform to overcome the trade-off between responsivity and response time.
基金financially supported by the National Natural Science Foundation of China(Nos.51473074 and 31400044)the General and Special Program of the Postdoctoral Science Foundation China(Nos.2013M530397 and 2014T70861)+1 种基金the Postgraduate Innovation Project of China University of Petroleum(East China)(No.YCX2015022)the Fundamental Research Funds for the Central Universities(No.15CX06049A)
文摘Two novel decyloxyphenylquinoxaline-based donor-acceptor (D-A) electroactive monomers bearing dialkoxythiophene as the donor unit are synthesized using Stille coupling reaction. The corresponding polymers, poly[2,3- bis(4-decyloxyphenyl)-5,8-bis(3,4-dimethoxylthiophen-2-yl)quinoxaline] (P1) and poly[2,3-bis(4-decyloxyphenyl)-5,8- bis(2,3-dihydrothieno[3,4-b][1,4]dioxin-5-yl)quinoxaline] (P2), are directly deposited onto the working electrode surface by electropolymerization. All materials were characterized by nuclear magnetic resonance (NMR), mass spectrometry (MS), scanning electron microscopy (SEM), cyclic voltammetry (CV), ultraviolet-visible absorption spectrometry (UV-Vis) and spectro-electrochemical measurements. Electrochemical studies demonstrate that both polymers are capable of showing both reasonable n- and p-doping processes, and advanced long-term switching stabilities. 3,4-Ethylenedioxythiophene substituted for 3,4-dimethoxythiophene as a donor unit, which enhances the conjugated double-bond character of the conducting polymer, thus leading to a lower electronic band-gap. Likewise, the neutral state color of the synthesized polymer tuned from blue to blue-green corresponding to the red shift of the maximum absorption wavelengths in the visible region. In addition, kinetics study of P1 revealed 42% (595 nm), 30% (839 nm) and 69% (1500 nm) transmittance changes (A7%), while P2 exhibited 32% (740 nm), 71% (2000 nm) at the dominant wavelengths. It was also observed that both films could switch quickly between the neutral state and oxidation state, with the response time less than 1 s both in visible and near infrared regions.