Fragmental Weight-Conservation Combining Scheme for Statistical Signal Transmissions under Fast Time-Varying Channels

Statistical Signal Transmission(SST)is a technique based on orthogonal frequency-division multiplexing(OFDM)and adopts cyclostationary features,which can transmit extra information without additional bandwidth.However,the more complicated environment in 5G communication systems,especially the fast time-varying scenarios,will dramatically degrade the performance of the SST.In this paper,we propose a fragmental weight-conservation combining(FWCC)scheme for SST,to overcome its performance degradation under fast time-varying channels.The proposed FWCC scheme consists of three phases:1、incise the received OFDM stream into pieces;2、endue different weights for fine and contaminated pieces,respectively;3、combine cyclic autocorrelation function energies of all the pieces;and 4、compute the final feature and demodulate data of SST.Through these procedures above,the detection accuracy of SST will be theoretically refined under fast time-varying channels.Such an inference is confirmed through numerical results in this paper.It is demonstrated that the BER performance of proposed scheme outperforms that of the original scheme both in ideal channel estimation conditions and in imperfect channel estimation conditions.In addition,we also find the experiential optimal weight distribution strategy for the proposed FWCC scheme,which facilitates practical applications.

Adversarial Training-Aided Time-Varying Channel Prediction for TDD/FDD Systems

In this paper, a time-varying channel prediction method based on conditional generative adversarial network(CPcGAN) is proposed for time division duplexing/frequency division duplexing(TDD/FDD) systems. CPc GAN utilizes a discriminator to calculate the divergence between the predicted downlink channel state information(CSI) and the real sample distributions under a conditional constraint that is previous uplink CSI. The generator of CPcGAN learns the function relationship between the conditional constraint and the predicted downlink CSI and reduces the divergence between predicted CSI and real CSI.The capability of CPcGAN fitting data distribution can capture the time-varying and multipath characteristics of the channel well. Considering the propagation characteristics of real channel, we further develop a channel prediction error indicator to determine whether the generator reaches the best state. Simulations show that the CPcGAN can obtain higher prediction accuracy and lower system bit error rate than the existing methods under the same user speeds.

Robust Beamforming Under Channel Prediction Errors for Time-Varying MIMO System

The accuracy of acquired channel state information(CSI)for beamforming design is essential for achievable performance in multiple-input multiple-output(MIMO)systems.However,in a high-speed moving scene with time-division duplex(TDD)mode,the acquired CSI depending on the channel reciprocity is inevitably outdated,leading to outdated beamforming design and then performance degradation.In this paper,a robust beamforming design under channel prediction errors is proposed for a time-varying MIMO system to combat the degradation further,based on the channel prediction technique.Specifically,the statistical characteristics of historical channel prediction errors are exploited and modeled.Moreover,to deal with random error terms,deterministic equivalents are adopted to further explore potential beamforming gain through the statistical information and ultimately derive the robust design aiming at maximizing weighted sum-rate performance.Simulation results show that the proposed beamforming design can maintain outperformance during the downlink transmission time even when channels vary fast,compared with the traditional beamforming design.

SUBSPACE METHOD FOR BLIND IDENTIFICATION OF CDMA TIME-VARYING CHANNELS

A new blind method is proposed for identification of CDMA Time-Varying (TV)channels in this paper. By representing the TV channel's impulse responses in the delay-Doppler spread domain, the discrete-time canonical model of CDMA-TV systems is developed and a subspace method to identify blindly the Time-Invariant (TI) coordinates is proposed. Unlike existing basis expansion methods, this new algorithm does not require .estimation of the base frequencies, neither need the assumption of linearly varying delays across symbols. The algorithm offers definite explanation of the expansion coordinates. Simulation demonstrates the effectiveness of the algorithm.

Antenna calibration using channel prediction for time-varying channels

Traditional antenna calibration methods for time division duplex （TDD） systems asSume that the flee-space channel remains the same during calibration, which is unreasonable under the high-speed rail and other time-varying channel scenarios, and will cause calibration error due to time variability. This paper proposes an antenna calibration method for time-varying channels. In the proposed method, the transceiver first sequentially sends a pilot signal to ob- tain equivalent do^vnlink and uplink channel responses. Then, by predicting the downlink （uplink） channel response fed back from the receiver using the channel prediction algorithm, the transmitter obtains the channel response correspond- ing to the channel response on uplink （downlink）. Finally, the transmitter calculates the transmission calibration factor through the prediction value. Compared with the traditional antenna calibration method, this method can improve the accuracy of the calibration factor. Simulation results show that the performance degradation of antenna calibration can be caused by time-varying channels and the proposed method can well compensate for the performance loss and sig- nificantly improve the antenna calibration performance for time-varying channels.

Pilot Placement for Time-Varying MIMO OFDM Channels with Virtual Subcarriers

The rapid time-variation of a fading multipath environment can impair the performance of multiple-input multiple-output orthogonal frequency division multiplexing (MIMO OFDM). This paper proposes a pilot placement method for MIMO OFDM systems under time-varying channels with the guard band. The time-varying channel is described by complex exponential basis expansion model (BEM). We discuss the least square (LS) channel estimation to obtain the minimum mean square error (MSE) and derive the pilot allocation that can satisfy the minimum MSE with regard to guard band in time-varying channels. It is shown that optimal pilot clusters can distribute non-uniformly in frequency domain and minimize the MSE. We generalize our scheme over G OFDM symbols and compare it with comb pilots. It is demonstrated that the proposed approach is more effective than previous work. Simulation results validate our theoretical analysis.

A Receiver Structure for Frequency-Flat Time-Varying Rayleigh Channels and Performance Analysis

This paper proposes a wavelet based receiver structure for frequency-flat time-varying Rayleigh channels, consisting of a receiver front-end followed by a Maximum A-Posteriori (MAP) detector. Discretization of the received continuous time signal using filter banks is an essential stage in the front-end part, where the Fast Haar Transform (FHT) is used to reduce complexity. Analysis of our receiver over slow-fading channels shows that it is optimal for certain modulation schemes. By comparison with literature, it is shown that over such channels our receiver can achieve optimal performance for Time-Orthogonal modulation. Computed and Monte-Carlo simulated performance results over fast time-varying Rayleigh fading channels show that with Minimum Shift Keying (MSK), our receiver using four basis functions (filters) lowers the error floor by more than one order of magnitude with respect to other techniques of comparable complexity. Orthogonal Frequency Shift Keying (FSK) can achieve the same performance as Time-Orthogonal modulation for the slow-fading case, but suffers some degradation over fast-fading channels where it exhibits an error floor. Compared to MSK, however, Orthogonal FSK provides better performance.

Novel differential unitary space-time modulation schemes for fast fading channels

Differential unitary space-time modulation （DUSTM）, which obtains full transmit diversity in slowly fiat-fading channels without channel state iufonnation, has generated significant interests recently. To combat frequency-selective fading, DUSTM has been applied to each subcarrier of an OFDM system and DUSTM-OFDM system was proposed. Both DUSTM and DUSTM-OFDM, however, are designed for slowly fading channels and suffer performance deterioration in fast fading channels. In this paper, two novel differential unitary space-time modulation schemes are proposed for fast fading channels. For fast fiat-fading channels, a subatrix interleaved DUSTM （SMI-DUSTM） scheme is proposed, in which matrix-segmentation and sub-matrix based interleaving are introduced into DUSTM system. For fast frequency-selective fading channels, a differential unitary space-frequency modulation （DUSFM） scheme is proposed, in which existing unitary space-time codes are employed across transmit antennas and OFDM subcarriers simultaneouslv and differential modulation is performed between two adjacent OFDM blocks. Compared with DUSTM and DUSTM-OFDM schemes, SMI-DUSTM and DUSFM-OFDM are more robust to fast channel fading with low decoding complexity, which is demonstrated by performance analysis and simulation resuits.

Tensor Decomposition-Based Channel Estimation and Sensing for Millimeter Wave MIMO-OFDM V2I Systems

An integrated sensing and communication(ISAC)scheme for a millimeter wave(mmWave)multiple-input multiple-output orthogonal frequency division multiplexing(MIMO-OFDM)Vehicle-to-Infrastructure(V2I)system is presented,in which both the access point(AP)and the vehicle are equipped with large antenna arrays and employ hybrid analog and digital beamforming structures to compensate the path loss,meanwhile compromise between hardware complexity and system performance.Based on the sparse scattering nature of the mmWave channel,the received signal at the AP is organized to a four-order tensor by the introduced novel frame structure.A CANDECOMP/PARAFAC(CP)decomposition-based method is proposed for time-varying channel parameter extraction,including angles of departure/arrival(AoDs/AoAs),Doppler shift,time delay and path gain.Then leveraging the estimates of channel parameters,a nonlinear weighted least-square problem is proposed to recover the location accurately,heading and velocity of vehicles.Simulation results show that the proposed methods are effective and efficient in time-varying channel estimation and vehicle sensing in mmWave MIMOOFDM V2I systems.

Neural Network and GBSM Based Time-Varying and Stochastic Channel Modeling for 5G Millimeter Wave Communications

In this work,a frame work for time-varying channel modeling and simulation is proposed by using neural network(NN)to overcome the shortcomings in geometry based stochastic model(GBSM)and simulation approach.Two NN models are developed for modeling of path loss together with shadow fading(SF)and joint small scale channel parameters.The NN models can predict path loss plus SF and small scale channel parameters accurately compared with measurement at 26 GHz performed in an outdoor microcell.The time-varying path loss and small scale channel parameters generated by the NN models are proposed to replace the empirical path loss and channel parameter random numbers in GBSM-based framework to playback the measured channel and match with its environment.Moreover,the sparse feature of clusters,delay and angular spread,channel capacity are investigated by a virtual array measurement at 28 GHz in a large waiting hall.

Compressed sensing based channel estimation for fast fading OFDM systems

A compressed sensing（CS） based channel estimation algorithm is proposed by using the delay-Doppler sparsity of the fast fading channel.A compressive basis expansion channel model with sparsity in both time and frequency domains is given.The pilots in accordance with a novel random pilot matrix in both time and frequency domains are sent to measure the delay-Doppler sparsity channel.The relatively nonzero channel coefficients are tracked by random pilots at a sampling rate significantly below the Nyquist rate.The sparsity channels are estimated from a very limited number of channel measurements by the basis pursuit algorithm.The proposed algorithm can effectively improve the channel estimation performance when the number of pilot symbols is reduced with improvement of throughput efficiency.

Digital Channelization Technology for HF Communication Base on Fast Filter Bank

Channelization typically realized by digital filter banks is an important topic in high frequency(HF) communication and software defined radios(SDR) areas. Channelization has a rigorous requirement for the characteristic of frequency response, e.g., steep transitional band and sharp decay. To address this issue, we investigated the feasibility and implementation of applying fast filter bank(FFB) in channelization in this paper. We analyzed the butterfly structure of FFB similar with fast Fourier transform(FFT), in which prototype sub-filters are cascaded to achieve a low complexity. Hence, it is suitable for designing filter bank with steep transitional band and sharp decay in stop-band. Moreover, we designed a pipelined structure of FFB to achieve a balance between area and performance. Design example shows that FFB has lower computational complexity compared with the other filter banks.

Compressed sensing based channel estimation using group random unit pilot for OFDM systems in fast moving environment~

A compressed sensing （CS） based channel estimation algorithm is proposed in the fast moving environment. A sparse basis expansion channel model in both time and frequency domain is given.Pilots are placed according to a novel random unit pilot matrix （RUPM） to measure the delay- Doppler sparse channel. The sparse channels are recovered by an extension group orthogonal matching pursuit （GOMP） algorithm, enjoying the diversity gain from multi-symbol processing. The relatively nonzero channel coefficients are estimated from a very limited number of pilots at a sampling rate significantly below the Nyquist rate. The simulation results show that the new channel estimator can provide a considerable performance improvement for the fast fading channels. Three significant reductions are achieved in the required number of pilots, memory requirements and computational complexity.

Deep learning-based time-varying channel estimation with basis expansion model for MIMO-OFDM system

For high-speed mobile MIMO-OFDM system,a low-complexity deep learning(DL) based timevarying channel estimation scheme is proposed.To reduce the number of estimated parameters,the basis expansion model(BEM) is employed to model the time-varying channel,which converts the channel estimation into the estimation of the basis coefficient.Specifically,the initial basis coefficients are firstly used to train the neural network in an offline manner,and then the high-precision channel estimation can be obtained by small number of inputs.Moreover,the linear minimum mean square error(LMMSE) estimated channel is considered for the loss function in training phase,which makes the proposed method more practical.Simulation results show that the proposed method has a better performance and lower computational complexity compared with the available schemes,and it is robust to the fast time-varying channel in the high-speed mobile scenarios.

Multiple Vandermonde Decomposition Based Channel Estimation for Mm Wave MIMO High-Mobility Communication in 5G and Beyond

Millimeter wave(mmWave)massive massive multiple input multiple output(MIMO)technique has been regarded as the viable solution for vehicular communications in 5G and beyond.To achieve the substantial increase in date rates,it is important to take an effective channel state information(CSI).However,existing channel estimation strategies are unavailable since the users high-mobility.To solve above issues,in this paper,inspired by a specific antenna structure,we propose a novel approach for fast time-varying channel estimation.Specifically,by considering the vehicle scenario with high-mobility,a corresponding mathematical model is firstly established.Then,based on the special structural of the sparse array,the switch network is used to replace the convention phase shifter of mmWave hybrid system,which can effectively reduce the number of radio-frequency(RF)chains and antennas.Furthermore,by solving the semidefinite programming(SDP)duality problem,the Doppler frequency and path parameters are effectively estimated.Simulation results are shown that the computational complexity and estimation accuracy of the proposed algorithm is superior than that of the traditional schemes.

Predictive FTF Adaptive Algorithm for Mobile Channels Estimation

The aim of this research paper is to improve the performance of Fast Transversal Filter (FTF) adaptive algorithm used for mobile channel estimation. A multi-ray Jakes mobile channel model with a Doppler frequency shift is used in the simulation. The channel estimator obtains the sampled channel impulse response (SIR) from the predetermined training sequence. The FTF is a computationally efficient implementation of the recursive least squares (RLS) algorithm of the conventional Kalman filter. A stabilization FTF is used to overcome the problem caused by the accumulation of roundoff errors, and, in addition, degree-one prediction is incorporated into the algorithm (Predictive FTF) to improve the estimation performance and to track changes of the mobile channel. The efficiency of the algorithm is confirmed by simulation results for slow and fast varying mobile channel. The results show about 5 to 15 dB improvement in the Mean Square Error (Deviation) between the estimated taps and the actual ones depending on the speed of channel time variations. Slow and fast vehicular channels with Doppler frequencies 100 Hz and 222 Hz respectively are used in these tests. The predictive FTF (PFTF) algorithm give a better channel SIR estimation performance than the conventional FTF algorithm, and it involves only a small increase in complexity.

A Fuzzy Clustering Algorithm Based on Multipath Component Trajectory for Millimeter Wave Radio Channels

Time-varying channel modeling plays an important role for many applications in time-variant scenarios,while most clustering algorithms focus on static channels and cannot accurately model the channel time-evolution properties.In this paper,a fuzzy clustering algorithm based on multipath component(MPC)trajectory is proposed.Firstly,both the distance and velocity similarities of the MPCs in different snapshots are taken into account to track the MPC trajectory,in which the fuzzy scheme and a kernel function are used to calculate the distance and velocity similarities,respectively.Secondly,a fuzzy MPC trajectory clustering algorithm is proposed to cluster the MPCs in multiple snapshots.The MPCs in a snapshot are clustered according to the membership,which is defined as the probability that a MPC belongs to different clusters.Finally,time-varying channels at 28 GHz are simulated to validate the performance of our proposed algorithm.The results show that our proposed algorithm is able to accurately identify the clusters in time-varying channels compared with the existing clustering algorithms.

Sparse Recovery of Linear Time-Varying Channel in OFDM System

In order to improve the performance of linear time-varying（LTV）channel estimation,based on the sparsity of channel taps in time domain,a sparse recovery method of LTV channel in orthogonal frequency division multiplexing（OFDM）system is proposed.Firstly,based on the compressive sensing theory,the average of the channel taps over one symbol duration in the LTV channel model is estimated.Secondly,in order to deal with the inter-carrier interference（ICI）,the group-pilot design criterion is used based on the minimization of mutual coherence of the measurement.Finally,an efficient pilot pattern optimization algorithm is proposed by a dual layer loops iteration.The simulation results show that the new method uses less pilots,has a smaller bit error ratio（BER）,and greater ability to deal with Doppler frequency shift than the traditional method does.

Methods to Improve the Long Distance Time-Varying Channel Transmission Performance of Expendable Profiler

To improve the transmission performance of XCTD channel, this paper proposes a method to measure directly and fit the channel transmission characteristics by using frequency sweeping method. Sinusoidal signals with a frequency range of 100 Hz to 10 k Hz and an interval of 100 Hz are used to measure transmission characteristics of channels with lengths of 300 m, 800 m, 1300 m, and 1800 m. The correctness of the fitted channel characteristics by transmitting square wave, composite waves of different frequencies, and ASK modulation are verified. The results show that when the frequency of the signal is below 1500 Hz, the channel has very little effect on the signal. The signal compensated for amplitude and phase at the receiver is not as good as the uncompensated signal.Alternatively, when the signal frequency is above 1500 Hz, the channel distorts the signal. The quality of signal compensated for amplitude and phase at receiver is better than that of the uncompensated signal. Thus, we can select the appropriate frequency for XCTD system and the appropriate way to process the received signals. Signals below1500 Hz can be directly used at the receiving end. Signals above 1500 Hz are used after amplitude and phase compensation at the receiving end.

液态金属冷却快堆子通道分析软件SACOS-LMR研发与工程应用

子通道分析方法是反应堆堆芯设计和热工水力分析的重要手段之一,对于我国提出的压水堆-快堆-聚变堆三步走核能发展战略,开发适用于液态金属冷却快堆热工安全分析的子通道分析程序具有重要意义。本文基于西安交通大学热工水力研究室自主开发的压水堆子通道程序SACOS,通过添加液态金属快堆特有的模型,如绕丝模型、盒间流模型、液态金属对流换热模型等,扩展至适用于液态金属快堆的子通道分析程序SACOS-LMR,该程序具备对液态金属快堆组件开展稳态和瞬态热工水力分析的功能。结合卡尔斯鲁厄开展的37棒钠冷瞬态实验,完成了SACOS-LMR程序的瞬态功能验证。基于验证后的SACOS-LMR程序,对欧洲铅冷快堆(ALFRED)堆芯开展了稳态工况和瞬态事故工况下的热工安全特性分析,计算结果合理,且与同类程序保持一致,表明SACOS-LMR程序可用于液态金属快堆的堆芯设计和热工水力分析研究。