Non-Targeted Metabolomics Reveals the Metabolic Alterations in Response to Artificial Selective Breeding in the Fast-Growing Strains of Pacific Oyster

Pacific oyster(Crassostrea gigas)is one of the most important mollusks cultured all around the world.Selective breeding programs of Pacific oysters in China is initiated since 2006 and developed the genetically improved strain with fast-growing trait.However,little is known about the metabolic signatures of the fast-growing trait.In the present study,the non-targeted metabolomics was performed to analyze the metabolic signatures of adductor muscle tissue in one-year old Pacific oysters from fast-growing strain and the wild population.A total of 7767 and 10174 valid peaks were extracted and quantified in ESI^(+)and ESI^(−)modes,resulting in 399 and 381 annotated metabolites,respectively.PCA and OPLS-DA revealed that considerable separation among samples from fastgrowing strain and wild population,suggesting the differences in metabolic signatures.Meanwhile,81 significantly different metabolites(SDMs)were identified in the comparisons between fast-growing strain and wild population,based on the strict thresholds.It was found that there were highly correlation and conserved coordination among these SDMs.KEGG enrichment analysis indicated that the SDMs were tightly related to pantothenate and CoA biosynthesis,steroid hormone biosynthesis,riboflavin metabolism,and arginine and proline metabolism.Of them,the CoA biosynthesis and metabolism,affected by pantetheine and pantothenic acid,might be important for the growth of Pacific oysters under artificial selective breeding.The study provides the comprehensive views of metabolic signatures in response to artificially selective breeding,and is helpful to better understand the molecular mechanism of fastgrowing traits in Pacific oysters.

Synthesis of plant-based biogenic jarosite nanoparticles using Azadirachta indica and Eucalyptus gunni leaf extracts and its application in Fenton degradation of dicamba

Bio-jarosite,an iron mineral synthesized biologically using bacteria,is a substitute for iron catalysts in the Fenton oxidation of organic pollutants.Iron nanocatalysts have been widely used as Fenton catalysts because they have a larger surface area than ordinary catalysts,are highly recyclable,and can be treated efficiently.This study aimed to explore the catalytic properties of bio-jarosite iron nanoparticles syn-thesized with green methods using two distinct plant species:Azadirachta indica and Eucalyptus gunni.The focus was on the degradation of dicamba via Fenton oxidation.The synthesized nanoparticles exhibited different particle size,shape,surface area,and chemical composition characteristics.Both particles were effective in removing dicamba,with removal efficiencies of 96.8%for A.indica bio-jarosite iron nano-particles(ABFeNPs)and 93.0%for E.gunni bio-jarosite iron nanoparticles(EBFeNPs)within 120 min of treatment.Increasing the catalyst dosage by 0.1 g/L resulted in 7.6%and 43.0%increases in the dicamba removal efficiency for EBFeNPs and ABFeNPs with rate constants of 0.025 min^(-1) and 0.023 min^(-1),respectively,confrming their catalytic roles.Additionally,the high efficiency of both catalysts was demonstrated through five consecutive cycles of linear pseudo-first-order Fenton oxidation reactions.

Influence of Aspect Ratio on Rolling Shear Properties of Fast-Grown Small Diameter Eucalyptus Lumber

Eucalyptus is a major fast-grown species in South China,which has the potential for producing structural wood products such as cross-laminated timber(CLT).Aspect ratio(board width vs.board thickness)of eucalyptus lumbers is small due to the small diameter of fast-grown eucalyptus wood.To evaluate its rolling shear modulus and strength for potential CLT applications,three-layer hybrid CLT shear block specimens with different aspect ratios(2,4,6),were tested by planar shear test method.Digital image correlation(DIC)was employed to measure the rolling shear strain distribution and development during the planar shear tests.The mean values of rolling shear modulus and strength of eucalyptus lamination were 260.3%and 88.2%higher than those of SPF(Spruce-pine-fir)lamination with the same aspect ratio of 4,respectively.The rolling shear properties of eucalyptus laminations increased as the aspect ratio increased.Aspect ratio had a significant influence on rolling shear modulus compared to rolling shear strength.The high shear strain regions were primarily found around the gaps between segments of cross layer.The quantity of high shear strain regions increased as the aspect ratio of lamination decreased.Other high shear strain regions also occurred around the pith and along the glue line.The sudden failure of specimen occurred in the high strain region.In conclusion,the rolling shear strength and modulus of fast-grown eucalyptus laminations exceed the respective characteristic values for softwoods in the current standard by roughly factors of 3 and 8,indicating great potential for fast-grown eucalyptus wood cross-layers in CLT.

Characteristics of fast-growing wood impregnated with nanoparticles

Falcataria moluccana or sengon is one of the fast-growing wood species widely grown in Indonesia.However,its wood is low quality with low density,and poor strength,durability,and dimensional stability.This study determined the effects of impregnation with monoethylene glycol(MEG)and nano-SiO2 on the characteristics of sengon wood,including its dimensional stability and density.Impregnation with MEG and nano-SiO2 had a significant effects on dimensional stability in terms of the weight percent gain,anti-swelling efficiency,water uptake,bulking effect,and density.The impregnated wood was examined by scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy and X-ray diffraction.The results show that MEG and nano-SiO2 were distributed homogeneously into cell walls of wood treated with 0.5%MEGSiO2.

Vacuum press drying studies on two fast-growing Indian wood species

Two fast-growing Indian species, Melia composita Benth. and Eucalyptus tereticornis Sm., which have different sets of physical properties, were dried together in a vacuum press dryer(VPD) under two drying conditions,i.e., above boiling point(ABP) and below boiling point(BBP). The ABP and BBP conditions were maintained by keeping the temperature constant at 75 ℃ and maintaining two pressure levels: 300 mm of Hg(ABP) and 450 mm of Hg(BBP). In order to understand pressure conditions at the core during vacuum drying, a cylindrical brass pipe was inserted in both wood cores and attached with pressure gauges placed outside of the VPD. The results indicate that the Melia wood core attained equilibrium pressure immediately with the pressure of VPD, while Eucalyptus attained it very slowly, reaching equilibrium at later stages of drying when cracks and checks advanced to the core.The drying rate was higher for Melia than Eucalyptus under both drying conditions. The drying rate of Melia(ABP) was higher than Melia(BBP), however, the drying rate for Eucalyptus(ABP) was not significantly different from the BBP drying rate.

Comparison of the morphometric dynamics of fast-growing and slow-growing strains of turbot Scophthalmus maximus

The dynamics of changes in body shape of fast-growing and slow-growing strains of turbot Scophthalmus maximus, and of the differences in body shape between the two strains, were evaluated from 3 to 27 months of age. The ratios of total length/body length, body width/body length and total length/body width were used as morphometric indices. The two strains exhibited different temporal trends in total length/body length but similar trends in body width/body length and total length/body width. Generally, body width/body length of the two strains increased with time and total length/body width decreased. Thus, the bodies of both fast-growing and slow-growing strains of turbot changed from a narrow to a more rounded shape. However, the ratio total length/body length was generally lower, body width/body length was mostly higher and total length/body width was consistently lower in the fast-growing strain than in the slowgrowing strain. Correlation analysis of the three shape ratios with body weight showed that total length/body length and total length/body width were unsuitable, and that width/body length was suitable, for use as a phenotypic marker for selective breeding of turbot for growth in weight.

Study on Microwave Pretreatment Technology to Improve the Effect of Shellac Impregnation of Fast-Growing Chinese Fir

To improve the mechanical properties of fast-growing Chinese fir(Cunnighamia lanceolate),expand its range of application,increase its value,and avoid the environmental pollution caused by impregnation with synthetic resin,Chinese fir was impregnated with a shellac solution.Since the shellac solution was difficult to penetrate into fast-growing Chinese fir,so microwave pretreatment was used to irradiate the wood to improve the permeability.This study investigated the effects of four factors,including the content of moisture in the wood before it was microwaved,the chamber pressure of microwave,the time of microwaving and the vacuum impregnation on the mechanical properties of Chinese fir wood.When the moisture content of wood before microwave was approximately 50%–60%,after microwaving and impregnation,the ultimate strength in static bending(modulus of rupture[MOR])and strength in compression perpendicular to the grain(SCPG)of the wood increased significantly.A microwave time of 100 seconds was more effective at improving the MOR and SCPG of the wood.If the wood was microwaved for too short or long period of time,the microwave pretreatment was not effective.When the samples were immersed in shellac for a longer period,the MOR and SCPG of Chinese fir gradually increased,but when the wood was impregnated for more than 12 hours,the increases were not significant.After the shellac penetrated the Chinese fir wood,it spread on the inner wall surface of tracheid to form a shellac film and easily formed plug-like deposits in microcapillaries.The use of Fourier-transform infrared spectroscopy,scanning electron microscopy and scanning electron microscopy-energy dispersion x-ray indicated that the microwave pretreatment can destroy the pit membranes on tracheids and facilitate the ability of shellac to penetrate the channel.

Determinants of foreign direct investment in fast-growing economies: evidence from the BRICS and MINT countries

The flow of foreign direct investment(FDI)into a country can benefit both the investing entity and host government.This study employed panel analysis to examine the factors that determine the direction of FDI to the fast-growing BRICS(Brazil,Russia,India,China,and South Africa)and MINT(Mexico,Indonesia,Nigeria,and Turkey)countries.First,we used a pooled time-series cross sectional analysis of data from 2001 to 2011 to estimate and model the determinants of FDI for three samples:BRICS only,MINT only,and BRICS and MINT combined.Then,a fixed effects approach was employed to provide the model for BRICS and MINT combined.The results demonstrate that market size,infrastructure availability,and trade openness play the most significant roles in attracting FDI to BRICS and MINT,while the roles of availability of natural resources and institutional quality are insignificant.To sustain and promote FDI inflow,the governments of BRICS and MINT must ensure that their countries remain attractive for investment by offering a level playing field for investors and political stability.BRICS and MINT governments also need to invest more in their human capital to ensure that their economies can absorb substantial skills and technology spillovers from FDI and promote sustainable long-term economic growth.This study is significant because it contributes to the literature on determinants of FDI by extending the scope of previous studies that often focused on BRICS only.

Co-Production of High-Grade Dissolving Pulp,Furfural,and Lignin from Eucalyptus via Extremely Low Acid Pretreatment and Pulping Technologies and Catalysis

Hemicellulose and lignin are not reasonably utilized during the dissolved pulp preparation process.This work aimed to propose a process for the co-production of dissolving pulp,furfural,and lignin from eucalyptus.High-grade dissolving pulp was prepared from eucalyptus using a combination of extremely low acid(ELA)pretreatment,Kraft cooking,and elementary chlorine-free(ECF)bleaching.The obtained pre-hydrolysate was catalytic conversion into furfural in a biphasic system,and lignin during Kraft cooking and ECF was recovered.The process condition was discussed as well as the mass flow direction.The results showed that ELA pretreatment could effectively remove 80.1%hemicellulose.Compared with traditional hydrothermal pretreatment,the ELA pretreatment significantly increased the xylose yield from 5.05 to 14.18 g/L at 170℃ for 2 h,which had practical significance for furfural production.The 82.7%furfural yield and 82.9%furfural selectivity were obtained from xylose-rich pre-hydrolysate using NaCl as a phase modifier in a biphasic system with 4-methyl-2-pentanone(MIBK)as an organic phase by ion exchange resin catalysts at 190℃ for 2 h.Subsequently,the pretreated eucalyptus was subjected to Kraft cooking,and the optimal alkali amount was 14%.Then,the Kraft pulp was bleached using the O-D1-EP-D_(2) sequence,and dissolving pulp was obtained with an ISO brightness of 86.0%,viscosity of 463 mL/g,andα-cellulose content of 95.4%.The Kraft lignin which has a potential application was investigated by 2D-HSQC NMR and 31P NMR.The results showed that the S/G ratio of Kraft lignin was 1.93,and the content of phenolic hydroxyl groups was 2.53 mmol/g.Moreover,based on the above proposed process,30.5 g dissolving pulp,5.5 g furfural,and 21.2 g lignin per 100 g eucalyptus chips(oven dry)were produced.This research will provide new catalysis and pulping technical routes for dissolving pulp,furfural,and Kraft lignin products,which are in great demand in the chemical industry.

International Practice of Fast-Growing Innovative Companies

The purpose of the article is to compare the conditions of development and support of fast-growing companies in European countries, Asian countries, and Russia. The comparative analysis performed is of interest as certain countries, including Russia, face the problem of economic slowdown. However, the fast-growing companies are powerful catalysts for the growth of the gross domestic product and the employment of the population. The conclusion of the study is that there are common patterns in ongoing support programs for fast-growing companies： long term, state support, innovative company orientation, and concessional financing. At the same time, there are fundamental differences in approaches to the state support for innovative companies. The first approach relates to the natural development of the fast-growing innovation companies and their support programs （Germany, Denmark）; the second approach is aimed at artificially stimulating the growth of such companies （South Korea）. In Russia there are institutional features of supporting fast-growing companies： small businesses are the most vulnerable part of the economic system and they require state support in crisis situations. Therefore, the experience of European and Asian countries in terms of supporting innovative and fast-growing companies can have a positive impact on the development of innovative companies in Russia. And definitely it is important to try to understand the nature of Russian innovative fast-growing companies： do we see them as entrepreneurial business as we do in the Western companies？

Physiological plasticity in eucalyptus clones in the vegetative stage contributes to drought tolerance

With the expansion of eucalyptus crops to areas with severe water limitations,physiological studies involving eucalyptus clones to identify those that are tolerant to water stress become important.The objective of this study was to assess morphological and physiological responses by eucalyptus clones subjected to drought stress and rehydration.The experiment consisted of three eucalyptus clones:VC865,I224 and I144 and two water regimes:control and water stress followed by rehydration,with six replicates.Leaf water potential,gas exchange,maximum quantum efficiency of photo systemⅡand plant height and stem diameter were evaluated under drought stress and rehydration.After6 d of rehydration,the number of leaves,leaf area and dry mass of root,leaf,stem and their total were evaluated.All clones showed intense reduction of gas exchange during the drought stress period,and only VC865 and 1144 showed rapid recovery with 3 d of rehydration.Clone 1224 showed greater reduction in height,stem diameter,number of leaves,water potential at midday(Ψ_(w)_(Midday)),and maximum quantum efficiency of photosystemⅡ(F_(v)/F_(m)).Clones VC865and T144 showed lower reductions inΨ_(wMidday)and F_(v)/F_(m) under stress.VC865 had lower reductions in leaf number,leaf area and higher leaf dry mass,while clone I144 had higher height and lower reduction in root dry mass under.Both these clones showed higher water use efficiency with 3d of rehydration.These different phenotypic plasticities gave the clones VC865 and 1144 efficient mechanisms of acclimatization to stress and more drought tolerance,enhancing their greater capacity for recovery after stress,which allowed lower dry mass reduction.Clone 1224,however,was more susceptible to drought stress,undergoing greater physiological damage with only partial recovery during rehydration.

Understory plant diversity and phenolic allelochemicals across a range of Eucalyptus grandis plantation ages

Allelopathy is an important mechanism in Eucalyptus plantations that causes detrimental impacts on understory diversity.Phenolic compounds are the main allelochemicals suppressing understory plants.However,the dynamic changes in phenolic allelochemicals and their relationship with understory diversity with increasing age of Eucalyptus plantations remain largely unclear.In this study,the understory plant diversity was assessed and phenolic compounds identified from leaf litter,roots,and rhizosphere soil samples in a Eucalyptus grandis plantation at two-year intervals for ten years using ultra-performance liquid chromatography-tandem mass spectrometry(UPLC-MS/MS).The abundance and diversity of under story plant species were lowest in 4-year-old plantations and increased significantly with age.Seven phenolic acids and 10 flavonoids were identified from leaf litter,roots,and rhizosphere soils.Most of the potential phenolic allelochemicals,such as salicylic acid,gallic acid,4-hydroxybenzoic acid,and epicatechin,were more abundant in younger plantations,especially at4 years old.The concentrations of phenolic compounds in the rhizosphere zone were significantly lower than in litter and root samples and did not change significantly with an increase in age.Notably,phenolic compounds contributed more to the variation in the understory plants than soil factors.Hydroxyphenyllactic acid,ellagic acid,quercetin,salicylic acid,and 4-hydroxybenzoic acid were the main phenolic compounds explaining the variation in plant diversity with plantation age.These findings indicate that young E.grandis plantations,especially at four years of age,merit a greater focus because of their lower understory plant diversity and higher allelopathic potential.

Effects of site productivity on individual tree maximum basal area growth rates of Eucalyptus pilularis in subtropical Australia

Inventory data were available from 96 plots of even-aged,monoculture,tall-open forests of Eucalyptus pilularis Smith,aged 2-63 years,growing in sub-tropical regions along the east coast of Australia.A model was developed relating the maximum possible stem basal area growth rate of individual trees to their stem basal area.For any tree size,this maximum increased as site productivity increased.However,the size at which this maximum occurred decreased as productivity increased.Much research has shown that,at any stand age,trees of a particular stem basal area are taller on more productive sites than on less productive ones.Taller trees incur greater respiratory costs to ensure maintenance of the photo synthetic capacity of their canopies;this reduces their growth rates.It was concluded that trees with larger basal areas will have the maximum possible growth rate on a less productive site,whilst trees with smaller basal areas will have the maximum possible on a more productive site.The model developed may constitute the first stage of a complete individual tree growth model system to predict wood yields from these forests.

Eucalyptus carbon stock estimation in subtropical regions with the modeling strategy of sample plots–airborne LiDAR–Landsat time series data

Updating eucalyptus carbon stock data in a timely manner is essential for better understanding and quantifying its effects on ecological and hydrological processes.At present,there are no suitable methods to accurately estimate the eucalyptus carbon stock in a large area.This research aimed to explore the transferability of the eucalyptus carbon stock estimation model at temporal and spatial scales and assess modeling performance through the strategy of combining sample plots,airborne LiDAR and Landsat time series data in subtropical regions of China.Specifically,eucalyptus carbon stock estimates in typical sites were obtained by applying the developed models with the combination of airborne LiDAR and field measurement data;the eucalyptus plantation ages were estimated using the random localization segmentation approach from Landsat time series data;and regional models were developed by linking LiDAR-derived eucalyptus carbon stock and vegetation age(e.g.,months or years).To examine the models’robustness,the developed models at the regional scale were transferred to estimate carbon stocks at the spatial and temporal scales,and the modeling results were evaluated using validation samples accordingly.The results showed that carbon stock can be successfully estimated using the age-based models(both age variables in months and years as predictor variables),but the month-based models produced better estimates with a root mean square error(RMSE)of 6.51 t⋅ha1 for Yunxiao County,Fujian Province,and 6.33 t⋅ha1 for Gaofeng Forest Farm,Guangxi Zhuang Autonomous Region.Particularly,the month-based models were superior for estimating the carbon stocks of young eucalyptus plantations of less than two years.The model transferability analyses showed that the month-based models had higher transferability than the year-based models at the temporal scale,indicating their possibility for analysis of carbon stock change.However,both the month-based and year-based models expressed relatively poor transferability at a spatial scale.This study provides new insights for cost-effective monitoring of carbon stock change in intensively managed plantation forests.

An Experimental Study of Composite Columns Filled with Eucalyptus nitens Timber under Axial Compression

Eucalyptus nitens(E.nitens)has been much used for producing paper but also shows promise for structural applications.In this study,static compressive tests were undertaken to examine its suitability to be used in an innovative composite column.The composite column was comprised of a rectangular steel tube with E.nitens timber infill.The nonlinear compressive behaviour of the composite column filled with E.nitens wood for both dry and wet conditions was examined.The same tests on rectangular steel tubes and bare dry and wet E.nitens samples were also undertaken as a comparison.For samples with different conditions,the ultimate capacity was evaluated and the effect of each condition on the compressive behaviour of the composite column was clarified.The steel tubes showed greater ductile behaviour,and more ductility was found in the wet samples.The steel tubes with E.nitens timber infill samples exhibited a greater linear elastic range connected with higher maximum loads,while the bare timber samples could support only lower maximum loads.The results from this research were promising for the use of rectangular steel tubes with E.nitens timber infill in structural applications.

Effect of Different Soil Regulation Measures on Yield and Soil Fertility of Eucalyptus Plantation in Southern Guangxi

In view of the problems of decreased unit yield,soil acidification,decreased soil organic matter and soil fertility caused by high generation single pure Eucalyptus plantation in southern Guangxi,a field experiment was conducted to study the yield,soil organic matter and soil fertility under six soil conditioning measures[interplanting Tephrosia candida under the forest,interplanting Sesbania cannabina under the forest,organic fertilizer application,residue to woodland,soil testing and formulated fertilization,and applying pure chemical fertilizer(CK)],and the enhancing effects of each treatment on the yield and soil improvement of Eucalyptus plantations were further comprehensively evaluated.The results showed that compared with the control,the five treatments could increase the average stock of Eucalyptus,among which the average stock under the treatment of interplanting T.candida under the forest was the highest,followed by soil testing and formulated fertilization.The soil organic matter content and soil fertility of the forest were significantly improved by interplanting green manure,organic fertilizer application and soil testing and formulated fertilization models,while the short-term(1 a)effect of the residue treatment on the improvement of soil organic matter and soil fertility was insignificant.During the actual production process,interplanting green manure and residue treatment were not effective due to the inoperability,and the applicability were not wide,which still needed further study.Therefore,organic manure application and soil testing and formulated fertilization were suitable choices to promote the improvement of productivity and soil quality of Eucalyptus plantation in Guangxi.

Evaluation of Antiplasmodial Effect of Methanol Leaf Extract and Fractions of Eucalyptus camadulensis (Denhn) in Albino Wistar Mice

Nigeria is one of the malaria-endemic countries, where the treatment of malaria has relied heavily on natural and traditional medicines. This study was designed to investigate and ascertain the preference of Eucalyptus camaldulensis in treating malaria using three standard models among local herbalists. Extraction was carried out on the leaves of Eucalyptus camadulensis using methanol. The methanol crude extract and other solvent fractions obtained were used for analysis. An acute toxicity test (LD50) was carried out using Lorke’s Method. The extract and its fractions were screened for phytochemical constituents using standard procedures. Different doses of the methanol crude extract (250 mg/kg, 500 mg/kg, and 1000 mg/kg) and other solvent fractions (250 mg/kg, 500 mg/kg) were assessed for their antiplasmodial property using the Suppressive, Curative, and Prophylactic models on different days. One hundred and eighty grams (18% w/w) of the extract were recovered from 1000 g of powdered leaves. The weight of fractions and their yields calculated from 50 g crude extract are n-hexane fraction (3.45 g, 6.9%), ethylacetate fraction (11.65 g, 23.3%), and butanol (7.84 g, 15.68%). The result of the acute toxicity test showed that the lethal dose of the plant was above 5000 mg/kg. For the crude extract, the 1000 mg/kg dose had the highest percentage of parasitemia suppression of 97.3%, 95.30%, and 75.97% in the curative, suppressive, and prophylactic models, respectively. The fractions exhibited a significant chemosuppressive effect when compared with the negative control, with the butanol fraction (500 mg/kg) showing a higher percentage suppression. The findings in this study justify the use of this plant in traditional medicine for the management of malaria fever and tally with its folkloric use. However, more research is needed to establish the functions of the constituents in relation to antiplasmodial activity.

Extraction Conditions of Essential Oil from Eucalyptus Leaves by Distillation

[Objectives]To explore the extraction conditions of essential oil from eucalyptus leaves.[Methods]The essential oil of eucalyptus leaves was extracted by steam distillation,and the yields of essential oil from eucalyptus leaves under different extraction times,soaking times and different solid-liquid ratios were analyzed through orthogonal test with three factors and three variables.[Results]The effects of various factors on extraction results were:distillation time>solid-liquid ratio>soaking time.When the extraction time and soaking time were 1.5 and 2 h,and the solid-liquid ratio of eucalyptus leaves to distilled water was 1:10,the yield of essential oil was the highest(0.8%).The yield of essential oil increased with the increase of extraction and soaking time,but when reaching the optimal value,the yield decreased with the extension of time.Increasing the solid-liquid ratio can improve the yield of essential oil,but beyond a certain value the yield increased gradually while the cost performance decreased.[Conclusions]The results will provide some reference for the recovery and utilization of eucalyptus leaves.

Single leaf area estimation models based on leaf weight of eucalyptus in southern China

Leaf area is an important parameter for modeling tree growth and physiological processes of trees. The single young and mature leaf area estimation models of eucalyptus were developed based on leaf fresh weight. In total, leaf area and leaf weight were measured from 455 fresh leaves of 25 trees of eucalyptus in southern China. The majority of the data （80%） were used for model calibration, and the remaining data （20%） were used for model validation. The linear, compound and power models were tested. Based on goodness of fit, prediction ability and residual performance, we found that linear and power models could best describe the relationship between leaf area and weight for young leaf and mature leaf, respectively. The study provides a simple and reliable method for estimating single-leaf area, which has a good potential in the functional- structural model of eucalyptus.

巨桉(Eucalyptus grandis)人工林土壤动物群落对采伐干扰的初期响应

为了解采伐干扰对巨桉（Eucalyptus grandis）人工林土壤动物的影响,于2005～2007年采用手捡法和干湿漏斗法对四川省洪雅县巨桉人工林采伐干扰前和采伐干扰后土壤动物群落进行调查,采伐干扰前四季共获土壤动物4775头,分属4门11纲27目,采伐干扰后获土壤动物4640头,分属4门10纲23目。采伐干扰后秋季（10月）、冬季（1月）和春季（4月）土壤动物个体数较采伐干扰前分别上升224头、368头和443头,而夏季（7月）下降了1170头。采伐干扰前巨桉人工林土壤动物个体数与类群数季节变化趋势基本一致,而采伐干扰后土壤动物类群数变化受土壤动物个体数变化的影响较小。与采伐干扰前相比,采伐干扰后枯落物层各季节土壤动物密度均低于采伐前,0～5 cm土层土壤动物密度与干扰前呈相反的变化趋势,其波动较5～10 cm和10～15 cm土层大。采伐干扰后土壤动物类群数四季共减少4个,采伐干扰前后土壤动物优势类群类群数波动小,采伐后常见类群类群数上升（除冬季外）,稀有类群对采伐干扰较敏感,其类群数下降幅度较大。采伐干扰前后同功能种团均以杂食性和腐食性土壤动物为主,两者百分比之和均在89%以上。密度-类群指数（DG）和多样性指数（H′）的变化趋势相似,采伐干扰前后的变化趋势相反,表明采伐干扰对巨桉人工林土壤动物季节变化有较大影响。