The well-known fatigue crack growth （FCG） curves are two-parameter dependents. The range of the stress intensity factor AK and the load ratio R are the parameters normally used for describing these curves. For engin...The well-known fatigue crack growth （FCG） curves are two-parameter dependents. The range of the stress intensity factor AK and the load ratio R are the parameters normally used for describing these curves. For engineering purposes, the mathematical representation of these curves should be integrated between the initial and final crack sizes in order to obtain the safety factors for stresses and life. First of all, it is necessary to reduce the dependence of the FCG curves to only one parameter. AK is almost always selected and, in these conditions, considered as the crack driving force. Using experimental data from literature, the present paper shows how to perform multiple regression analyses using the traditional Walker approach and the more recent unified approach. The correlations so obtained are graphically analyzed in three dimensions. Numerical examples of crack growth analysis for cracks growing under nominal stresses of constant amplitude in smooth and notched geometries are performed, assuming an identical material component as that of the available experimental data. The resulting curves of crack size versus number of cycles （a vs. N） are then compared. The two models give approximately the same （a vs. N） curves in both geometries. Differences between the behaviors of the （a vs. N） curves in smooth and notched geometries are highlighted, and the reasons for these particular behaviors are discussed.展开更多
文摘The well-known fatigue crack growth （FCG） curves are two-parameter dependents. The range of the stress intensity factor AK and the load ratio R are the parameters normally used for describing these curves. For engineering purposes, the mathematical representation of these curves should be integrated between the initial and final crack sizes in order to obtain the safety factors for stresses and life. First of all, it is necessary to reduce the dependence of the FCG curves to only one parameter. AK is almost always selected and, in these conditions, considered as the crack driving force. Using experimental data from literature, the present paper shows how to perform multiple regression analyses using the traditional Walker approach and the more recent unified approach. The correlations so obtained are graphically analyzed in three dimensions. Numerical examples of crack growth analysis for cracks growing under nominal stresses of constant amplitude in smooth and notched geometries are performed, assuming an identical material component as that of the available experimental data. The resulting curves of crack size versus number of cycles （a vs. N） are then compared. The two models give approximately the same （a vs. N） curves in both geometries. Differences between the behaviors of the （a vs. N） curves in smooth and notched geometries are highlighted, and the reasons for these particular behaviors are discussed.
