Dynamic response of mountain tunnel,bridge,and embankment along the Sichuan-Tibet transportation corridor to active fault based on model tests

The Sichuan-Tibet transportation corridor is prone to numerous active faults and frequent strong earthquakes.While extensive studies have individually explored the effect of active faults and strong earthquakes on different engineering structures,their combined effect remains unclear.This research employed multiple physical model tests to investigate the dynamic response of various engineering structures,including tunnels,bridges,and embankments,under the simultaneous influence of cumulative earthquakes and stick-slip misalignment of an active fault.The prototype selected for this study was the Kanding No.2 tunnel,which crosses the Yunongxi fault zone within the Sichuan-Tibet transportation corridor.The results demonstrated that the tunnel,bridge,and embankment exhibited amplification in response to the input seismic wave,with the amplification effect gradually decreasing as the input peak ground acceleration(PGA)increased.The PGAs of different engineering structures were weakened by the fault rupture zone.Nevertheless,the misalignment of the active fault may decrease the overall stiffness of the engineering structure,leading to more severe damage,with a small contribution from seismic vibration.Additionally,the seismic vibration effect might be enlarged with the height of the engineering structure,and the tunnel is supposed to have a smaller PGA and lower dynamic earth pressure compared to bridges and embankments in strong earthquake zones crossing active faults.The findings contribute valuable insights for evaluating the dynamic response of various engineering structures crossing an active fault and provide an experimental reference for secure engineering design in the challenging conditions of the Sichuan-Tibet transportation corridor.

Formation mechanism of fault accommodation zones under combined stress in graben basin:Implications from geomechanical modeling

A fault accommodation zone is a type of structure that is defined as regulating displacement and strain between faults structure.Increasing numbers of fault accommodation zones are being identified in graben basins,indicating the potential exploration target and petroleum accumulation areas.This study aims to analyze the formation mechanism and development of fault accommodation zones under combined stress by a numerical simulation method considering geomechanical modeling.Using three-dimensional(3-D)seismic interpretation and fractal dimension method,exampled with the Dongxin fault zone,the fault activity and fault combination pattern were conducted to quantitatively characterize the activity difference in fault accommodation zones.Combined with mechanical experiment test,a geomehcanical model was established for fault accommodation zones in a graben basin.Integrating the paleostress numerical simulations and structural physical simulation experiment,the developmental characteristics and genetic mechanism of fault accommodation zones were summarized.Influenced by multi movements and combined stresses,three significant tectonic evolution stages of the Dongxing Fault Zone(DXFZ)were distinguished:During the E_(s)^(3)sedimentary period,the large difference in the stress,strain,and rupture distribution in various faults were significant,and this stage was the key generation period for the prototype of the DXFZ,including the FAZ between large-scale faults.During the E_(s)^(2)sedimentary period,the EW-trending symmetric with opposite dipping normal faults and the NE-SW trending faults with large scale were furtherly developed.The junction area of two secondary normal faults were prone to be ruptured,performing significant period for inheriting and developing characteristics of fault accommodation zones.During the Es1 sedimentary period,the high-order faults in the DXFZ exhibited the obvious fault depressions and strike-slip activity,and the fault accommodation zones were furtherly inherited and developed.This stage was the molded and formative period of the FAZ,the low-order faults,and the depression in the DXFZ.

Seismic analysis of the active character of the Taihang Mountain piedmont fault

The Taihang Mountain piedmont fault is a large-scale structure zone in north and east China which cross Beijing,with the NE-NNE extent spans approximately 620 km.It is very important to determine the fault zone activity due to the close relation of active structures and earthquakes.Regarding the fault activity,there are three different opinions：1） it is a large deep fault zone;2） it is an active fault zone and an earthquake structure belt;and 3） it is not an earthquake structure belt.In order to ascertain the active character of the fault,the deep tectonic setting and the activity since the Quaternary were investigated using recent seismic and drilling data to make a joint interpretation.The investigation results show that the Taihang Mountain piedmont fault is not a large lithospheric fault because the early middle Pleistocene（Q（P2）） layers are offset by the fault and the late middle Pleistocene（Q（P2）） and late Pleistocene layers are not offset by the fault.We determine that the Taihang Mountain piedmont fault in the area is not an active fault and is also not a large lithospheric fault.This study result provides important geological and geophysical data for city planning and construction in Hebei province and, especially,has great significance for seismic hazard assessment of the capital area.

The numerical simulation and inversion fitting of radon concentration distribution in homogeneous overburden above active fault zones

Based on the convection and diffusion mechanisms of radon migration, in this paper we deduce the two-dimensional differential equation for radon transportation in the overburden above active fault zones with an unlimited extension along the strike. Making use of the finite difference method, the radon concentration distribution in the overburden above active faults is calculated and modeled. The active fault zone parameters, such as the depth and the width of the fault zone, and the value of radon concentration, can be inverted from the measured radon concentration curve. These realize quantitative interpretation for radon concentration anomalies. The inversion results are in good agreement with the actual fault zone parameters.

Shallow crustal velocity structures revealed by active source tomography and fault activities of the Mianning–Xichang segment of the Anninghe fault zone, Southwest China

The Anninghe fault is a large left-lateral strike-slip fault in southwestern China. It has controlled deposition and magmatic activities since the Proterozoic, and seismic activity occurs frequently. The Mianning-Xichang segment of the Anninghe fault is a seismic gap that has been locked by high stress. Many studies suggest that this segment has great potential for large earthquakes(magnitude >7). We obtained three vertical velocity profiles of the Anninghe fault(between Mianning and Xichang) based on the inversion of P-wave first arrival times. The travel time data were picked from seismograms generated by methane gaseous sources and recorded by three linearly distributed across-fault dense arrays. The inversion results show that the P-wave velocity structures at depths of 0-2 km corresponds well with the local lithology. The Quaternary sediments have low seismic velocities, whereas the igneous rocks,metamorphic rocks, and bedrock have high seismic velocities. We then further discuss the fault activities of the two fault branches of the Anninghe fault in the study region based on small earthquakes(magnitudes between ML 0.5 and ML 2.5) detected by the Xichang array.The eastern fault branch is more active than the western branch and that the fault activities in the eastern branch are different in the northern and southern segments at the border of 28°21′N. The high-resolution models obtained are essential for future earthquake rupture simulations and hazard assessments of the Anninghe fault zone. Future studies of velocity models at greater depths may further explain the complex fault activities in the study region.

Active Faulting Pattern,Present-day Tectonic Stress Field and Block Kinematics in the East Tibetan Plateau

This paper examines major active faults and the present-day tectonic stress field in the East Tibetan Plateau by integrating available data from published literature and proposes a block kinematics model of the region. It shows that the East Tibetan Plateau is dominated by strike-slip and reverse faulting stress regimes and that the maximum horizontal stress is roughly consistent with the contemporary velocity field, except for the west Qinling range where it parallels the striking of the major strike-slip faults. Active tectonics in the East Tibetan Plateau is characterized by three faulting systems. The left-slip Kunlun-Qinling faulting system combines the east Kunlun fault zone, sinistral oblique reverse faults along the Minshan range and two major NEE-striking faults cutting the west Qinling range, which accommodates eastward motion, at 10--14 mm/a, of the Chuan-Qing block. The left-slip Xianshuihe faulting system accommodated clockwise rotation of the Chuan-Dian block. The Longmenshan thrust faulting system forms the eastern margin of the East Tibetan Plateau and has been propagated to the SW of the Sichuan basin. Crustal shortening across the Longmenshan range seems low （2-4 mm/a） and absorbed only a small part of the eastward motion of the Chuan-Qing block. Most of this eastward motion has been transmitted to South China, which is moving SEE-ward at 7-9 mm/a. It is suggested from geophysical data interpretation that the crust and lithosphere of the East Tibetan Plateau is considerably thickened and theologically layered. The upper crust seems to be decoupled from the lower crust through a decollement zone at a depth of 15-20 kin, which involved the Longmenshan fault belt and propagated eastward to the SW of the Sichuan basin. The Wenchuan earthquake was just formed at the bifurcated point of this decollement system. A rheological boundary should exist beneath the Longmenshan fault belt where the lower crust of the East Tibetan Plateau and the lithospheric mantle of the Yangze block are juxtaposed.

Distribution patterns of rock mass displacement in deeply buried areas induced by active fault creep slip at engineering scale

Active fault creep slip induces deformation of rock mass buried deeply in fault zones that significantly affect the operational safety of long linear projects passing through it.Displacement distribution patterns of rock masses in active fault zones which have been investigated previously are the key design basis for such projects.Therefore,a discrete element numerical model with different fault types,slip time,dip angles,and complex geological features was established,and then the creep slip for normal,reverse,and strike-slip faults were simulated to analyze the displacement distribution in the fault rock mass.A disk rotation test system and the corresponding laboratory test method were developed for simulating rock mass displacement induced by creep slippage of faults.A series of rotation tests for softand hard-layered specimens under combined compression and torsional stress were conducted to verify the numerical results and analyze the factors influencing the displacement distribution.An S-shaped displacement distribution independent of fault dip angle was identified corresponding to reverse,normal,and strike-slip faults.The results indicated that the higher the degree of horizontal extrusion,the softer the rock mass at the fault core,and the higher the degree of displacement concentration in the fault core;about 70%of the creep slip displacement occurs within this zone under 100 years of creep slippage.

Earthquake recurrence on whole active fault zones and its relation to that on individual fault-segments

Based on the earthquake data of 11 active intraplate fault zones of the Chinese mainland, we have studied the earthquake recurrence behaviors on entire active fault zones and their relations to those on individual fault-segments. The results show that the earthquake recurrence on entire active fault zones, each of them is made up of multiple segments, displays three types of behavior, i.e., the clustering behavior, the random behavior, and the poor quasi-periodic behavior. The major one is the sparse clustering behavior, its recurrence process often exhibits that clusters (active periods) and gaps (quiescent periods) occur alternatively in varying degrees. The recurrence intervals within and between clusters, the durations of individual clusters, the earthquake number and strength of every cluster are all variable. The recurrence process is non-linear, there is neither the strength-time dependence nor the time-strength dependence. However, the earthquake recurrence processes on individual fault-segments are much more simple, and mainly display either the quasi-periodic or the time-predictable behaviors. Also, this study further discovers that the temporal clustering in earthquake recurrence process on entire fault zones is mainly caused by the rupture 'contagion' on different fault-segments within relatively short periods of time. Along active fault zones, the degree and orientation of rupture 'contagion' may vary with different seismic cycles, and the 'contagion' seems to be able to jump over unbroken 'gaps' on the fault zones.

Main active faults and seismic activity along the Yangtze River Economic Belt:Based on remote sensing geological survey

The Yangtze River Economic Belt(YREB)spans three terrain steps in China and features diverse topography that is characterized by significant differences in geological structure and presentday crustal deformation.Active faults and seismic activity are important geological factors for the planning and development of the YREB.In this paper,the spatial distribution and activity of 165 active faults that exist along the YREB have been compiled from previous findings,using both remote-sensing data and geological survey results.The crustal stability of seven particularly noteworthy typical active fault zones and their potential effects on the crustal stability of the urban agglomerations are analyzed.The main active fault zones in the western YREB,together with the neighboring regional active faults,make up an arc fault block region comprising primarily of Sichuan-Yunnan and a“Sichuan-Yunnan arc rotational-shear active tectonic system”strong deformation region that features rotation,shear and extensional deformation.The active faults in the central-eastern YREB,with seven NE-NNE and seven NW-NWW active faults(the“7-longitudinal,7-horizontal”pattern),macroscopically make up a“chessboard tectonic system”medium-weak deformation region in the geomechanical tectonic system.They are also the main geological constraints for the crustal stability of the YREB.

Analyses of active faults, seismic activities and sea floor unstable factors of the Zhujiang River Mouth Basin and its adjacent areas

-On the basis of the data of geophysics and seismic activities, the analyses of the active faults, seismic activities and the sea floor unstable factors of the Zhujiang River Mouth Basin have been made so as to study the characteristics of the compressional subactive continental margin of Cathaysian system, arc littoral strongly active fracture zone, the division of seismic subzone and seismic zone of the continental margin of northern South China Sea, the potential focal area, and to analyze the regional stability. We consider that the Zhujiang River Mouth Basin belongs to a stable or a moderately stable region.

A Comprehensive Investigation of an Offshore Active Fault in the Western Sagami Bay, Central Japan

Offshore active faults, especially those in the deep sea, are very difficultto study because of the water and sedimentary cover. To characterize the nature and geometry ofoffshore active faults, a combination of methods must be employed. Generally, seismic profiling isused to map these faults, but often only fault-related folds rather than fracture planes are imaged.Multi-beam swath bathymetry provides information on the structure and growth history of a faultbecause movements of an active fault are reflected in the bottom morphology. Submersible anddeep-tow surveys allow direct observations of deformations on the seafloor (including fracture zonesand microstructures). In the deep sea, linearly aligned cold seep communities provide indirectevidence for active faults and the spatial migration of their activities. The Western Sagami Bayfault (WSBF) in the western Sagami Bay off central Japan is an active fault that has been studied indetail using the above methods. The bottom morphology, fractured breccias directly observed andphotographed, seismic profiles, as well as distribution and migration of cold seep communitiesprovide evidence for the nature and geometry of the fault. Focal mechanism solutions of selectedearthquakes in the western Sagami Bay during the period from 1900 to 1995 show that the maximumcompression trends NW-SE and the minimum stress axis strikes NE-SW, a stress pattern indicating aleft-lateral strike-slip fault.

A new early-warning prediction system for monitoring shear force of fault plane in the active fault

The most common method used to describe earthquake activity is based on the changes in physical parameters of the earth＇s surface such as displacement of active fault and seismic wave.However,such approach is not successful in forecasting the movement behaviors of faults.In the present study,a new mechanical model of fault activity,considering the shear strength on the fault plane and the influence of the resistance force,is established based on the occurrence condition of earthquake.A remote real-time monitoring system is correspondingly developed to obtain the changes in mechanical components within fault.Taking into consideration the local geological conditions and the history of fault activity in Zhangjiakou of China,an active fault exposed in the region of Zhangjiakou is selected to be directly monitored by the real-time monitoring technique.A thorough investigation on local fault structures results in the selection of two suitable sites for monitoring potential active tectonic movements of Zhangjiakou fault.Two monitoring curves of shear strength,recorded during a monitoring period of 6 months,turn out to be steady,which indicates that the potential seismic activities hardly occur in the adjacent region in the near future.This monitoring technique can be used for early-warning prediction of the movement of active fault,and can help to further gain an insight into the interaction between fault activity and relevant mechanisms.

Active Fault Exploration and Seismic Hazard Assessment in Fuzhou City

It has been proven by a number of earthquake case studies that an active fault-induced earthquake beneath a city can be devastating. It is an urgent issue for seismic hazard reduction to explore the distribution of active faults beneath the urban area and identify the seismic source and the risks underneath. As a pilot project of active fault exploration in China, the project, entitled “Active fault exploration and seismic hazard assessment in Fuzhou City”, started in early 2001 and passed the check before acceptance of China Earthquake Administration in August 2004. The project was aimed to solve a series of scientific issues such as fault location, dating, movement nature, deep settings, seismic risk and hazard, preparedness of earthquake prevention and disaster reduction, and etc. by means of exploration and assessment of active faults by stages, i.e., the preliminary survey and identification of active faults in target area, the exploration of deep seismotectonic settings, the risk evaluation of active seismogenic faults, the construction of geographic information system of active faults, and so on. A lot of exploration methods were employed in the project such as the detection of absorbed mercury, free mercury and radon in soil, the geological radar, multi-channel DC electrical method, tsansient electromagnetic method, shallow seismic refraction and reflection, effect contrast of explored sources, and various sounding experiments, to establish the buried Quaternary standard section of the Fuzhou basin. By summing up, the above explorations and experiments have achieved the following results and conclusions ：

Influence of 2008 Wenchuan earthquake on earthquake occurrence trend of active faults in Sichuan-Yunnan region

The Wenchuan earthquake coseismic deformation field is inferred from the coseismic dislocation data based on a 3-D geometric model of the active faults in Sichuan-Yunnan region. Then the potential dislocation displacement is inverted from the deformation field in the 3-D geometric model. While the faults＇ slip velocities are inverted from GPS and leveling data, which can be used as the long-term slip vector. After the potential dislocation displacements are projected to long-term slip direction, we have got the influence of Wenchuan earthquake on active faults in Sichuan-Yunnan region. The results show that the northwestern segment of Longmenshan fault, the southern segments of Xianshuihe fault, Anninghe fault, Zemuhe fault, northern and southern segments of Daliangshan fault, Mabian fault got earthquake risks advanced of 305, 19, 12, 9.1 and 18, 51 years respectively in the eastern part of Sichuan and Yunnan. The Lijiang-Xiaojinhe fault, Nujiang fault, Longling-Lancang fault, Nantinghe fault and Zhongdian fault also got earthquake risks advanced in the western part of Sichuan-Yunnan region. Whereas the northwestern segment of Xianshuihe fault and Xiaojiang fault got earthquake risks reduced after the Wenchuan earthquake.

The neotectonic deformation and earthquake activity in Zhuanglang river active fault zone of Lanzhou

Lanzhou Institute of Seismology, China Seismological Bureau, Lanzhou 730000, China 2) Institute of Geology, China Seismological Bureau, Beijing 100029, China

Active Depths of Main Faults in the Ying-Qiong Basin Investigated by Multi-Scale Wavelet Decomposition of Bouguer Gravity Anomalies and Power Spectral Methods

The Ying-Qiong Basin is located on the northwestern margin of the South China Sea and at the junction of the South China Block and the Indochina Block.It is characterized by complex geological structures.The existing seismic data in the study area is sparse due to the lack of earthquake activities.Because of the limited source energy and poor coverage of seismic data,the knowledge of deep structures in the area,including the spatial distribution of deep faults,is incomplete.Contrarily,satellite gravity data cover the entire study area and can reveal the spatial distribution of faults.Based on the wavelet multi-scale decomposition method,the Bouguer gravity field in the Ying-Qiong Basin was decomposed and reconstructed to obtain the detailed images of the first-to sixth-order gravitational fields.By incorporating the known geological features,the gravitational field responses of the main faults in the Ying-Qiong Basin were identified in the detailed fields,and the power spectrum analysis yielded the depths of 1.4,8,15,26.5,and 39 km for the average burial depths of the bottom surfaces from the first-to fifth-order detailed fields,respectively.The four main faults in the Yinggehai Basin all have a large active depth range:fault A(No.1)is between 5 and 39 km,fault B is between 26.5 and 39 km,and faults C and D are between 15 and 39 km.However,the depth of active faults in the Qiongdongnan Basin is relatively shallow,mainly between 8 and 26.5 km.

A Preliminary Study on a Seismotectonic Model for the Active Faults in the Xining Urban Area

On the basis of the Xining active urban fault survey, we studied the relationship between the active urban fault and fold deformation. The result of this research shows that the Huangshuihe fault and the NW-striking fault on the northern bank of the Huangshulbe River are tensional faults on top of an anticline, the Nanchuanhe fault is a transverse tear fault resulting from differential folding on two sides of the fault, the east bank of the Beichuanhe River fault is a compressional fault developed on the core or climb of a syncline. By balance profile analysis of fold deformation and inversion of gravity anomaly data, we obtained the depth of the detachment plane and established the seismotectonic model of the ）fining urban area. Based on the seismotectonic model, we analyzed the earthquake potential of the active urban fault.

Marine Active Fault Exploration and Paleoearthquake Research

Marine active fault exploration and paleoearthquake research are still a gap in China. The paper gives a review on major research methods and new progress made abroad, including submarine survey boat, seismic reflection and acoustic reflection. Through detailed studies of offset history of 10 ka to 30 ka, it is possible to determine paleoearthquake recurrent intervals and elapsed time since last major earthquake. It is suggested that active fault exploration can be carried out by acoustic exploring method in large earthquake region of Bohai Sea. Paleoearthquake activity history can be revealed and earthquake risk in the future can be predicted.

Study on Active Faults in Quaternary Unconsolidated Sediments by Microstructural Method

Active faults in Quaternary unconsolidated sediments are important indicators to determine paleoearthquake events. They can be studied by macroscopic geological survey, but some problems have been encountered, such as invisible active faults. The authors found an approach to solve these problems by microstructural observation. Firstly, oriented original-state samples of Quaternary unconsolidated sediments in active fault zones are collected. Secondly, the samples are consolidated in laboratory. Thirdly, microstructural slides are ground in three-dimension coordinate system. Lastly, microstructures are observed in the microscopic field. By this method, the movement properties of active faults can be determined in lack of the support of macroscopic data. The invisible faults in Quaternary unconsolidated sediments can be found and described. The mechanisms of die-out faults can be also studied. Moreover, the boundaries between different unconsolidated sediments in engineering sites can be studied to judge whether they are active faults or not.

The Application of the Acoustic Method to the Exploration of Urban Active Faults and a Comparison with the Artificial Earthquake, and Radar Methods

The depth of upper fault point is the key data for ascertaining the active age of a buried fault on a plain. The difference of depth obtained from same fault may be dozens to several hundred meters when using different geophysical methods. It can result in the absolutely opposite conclusions when judging fault activity. Because of a lack of an artificial earthquake source with wide band and high central frequency, many kinds of methods have to be used together. The higher the frequency of the artificial earthquake wave, electromagnetic wave and sonic wave, the higher the resolution. However the attenuation is also very fast and the exploration depth is very shallow. The reverse is also true. The frequency of artificial seismic waves is in the tens of Hz. Its exploration depth is big and the resolution is poor. The frequency of radar electromagnetic waves is about a million Hz, indicating that the resolving power is better, but the exploration depth is very shallow. However, the acoustic frequency is thousands of Hz, its resolving power is better than that of the artificial earthquake method and the exploration depth is larger than that of the radar method. So it is suitable for extra shallow exploration in the thick deposit strata of the Quaternary. The preliminary results detected using the high frequency acoustic method in extra shallow layers indicates that previous inferences about some fault activity in the eastern part of the North China plain may need to be greatly corrected.