Active Faulting Pattern,Present-day Tectonic Stress Field and Block Kinematics in the East Tibetan Plateau

This paper examines major active faults and the present-day tectonic stress field in the East Tibetan Plateau by integrating available data from published literature and proposes a block kinematics model of the region. It shows that the East Tibetan Plateau is dominated by strike-slip and reverse faulting stress regimes and that the maximum horizontal stress is roughly consistent with the contemporary velocity field, except for the west Qinling range where it parallels the striking of the major strike-slip faults. Active tectonics in the East Tibetan Plateau is characterized by three faulting systems. The left-slip Kunlun-Qinling faulting system combines the east Kunlun fault zone, sinistral oblique reverse faults along the Minshan range and two major NEE-striking faults cutting the west Qinling range, which accommodates eastward motion, at 10--14 mm/a, of the Chuan-Qing block. The left-slip Xianshuihe faulting system accommodated clockwise rotation of the Chuan-Dian block. The Longmenshan thrust faulting system forms the eastern margin of the East Tibetan Plateau and has been propagated to the SW of the Sichuan basin. Crustal shortening across the Longmenshan range seems low （2-4 mm/a） and absorbed only a small part of the eastward motion of the Chuan-Qing block. Most of this eastward motion has been transmitted to South China, which is moving SEE-ward at 7-9 mm/a. It is suggested from geophysical data interpretation that the crust and lithosphere of the East Tibetan Plateau is considerably thickened and theologically layered. The upper crust seems to be decoupled from the lower crust through a decollement zone at a depth of 15-20 kin, which involved the Longmenshan fault belt and propagated eastward to the SW of the Sichuan basin. The Wenchuan earthquake was just formed at the bifurcated point of this decollement system. A rheological boundary should exist beneath the Longmenshan fault belt where the lower crust of the East Tibetan Plateau and the lithospheric mantle of the Yangze block are juxtaposed.

Field survey and analysis on near-fault severely damaged high-speed railway bridge in 2022 M6.9 Menyuan earthquake

The 2022 M6.9 Menyuan earthquake caused severe damage to a high-speed railway bridge,which was designed for high-speed trains running at speeds of above 250 km/h and is located right next to the fault.Bridges of this type have been widely used for rapidly constructing the high-speed railway network,but few bridges have been tested by near-fault devastating earthquakes.The potential severe impact of the earthquake on the high-speed railway is not only the safety of the infrastructure,trains and passengers,but also economic loss due to interrupted railway use.Therefore,a field survey was carried out immediately after the earthquake to collect time-sensitive data.The damage to the bridge was carefully investigated,and quantitative analyses were conducted to better understand the mechanism of the bridge failure.It was found that seismic action perpendicular to the bridge’s longitudinal direction caused severe damage to the girders and rails,while none of the piers showed obvious deformation or cracking.The maximum values of transverse displacement,out-of-plane rotation and twisting angle of girders reached 212.6 cm,3.1 degrees and 19.9 degrees,respectively,causing severe damage to the bearing supports and anti-seismic retaining blocks.These observations provide a basis for improving the seismic design of high-speed railway bridges located in near-fault areas.

Fault diagnosis and analysis of main sea water pump based on vibration monitoring in offshore oil field

The main sea water pump is the key equipment for the floating production storage and offloading （FPSO）. Affected by some factors such as hull deformation, sea water corrosion, rigid base and pipeline stress, the vibration value of main sea water pump in the horizontal direction is abnormally high and malfunctions usually happen. Therefore, it is essential to make fault diagnosis of main sea water pump, By conventional off-line monitoring and vibration amplitude spectrum analysis, the fault cycle is found and the alarm value and stop value of equipment are set, which is helpful to equipment maintenance and accident prevention.

Present-day Block Movement and Fault Activity on the Eastern Margin of the Tibetan Plateau

The geology and tectonics in the eastern margin of Tibetan Plateau are complex. The main tectonic framework is composed of blocks and faults. Using discontinuous global positioning system survey data for 2008–2014, the velocity field for the Eurasia reference framework was obtained. Based on the velocity field, the present-day velocities of the blocks and boundary faults were estimated. The results reveal that the movement rates of the Chuan-Qing, South China, Chuan-Dian and Indo-China blocks are（17.02±0.60） mm/a,（8.77±1.51） mm/a,（13.85±1.31） mm/a and（6.84 ± 0.74） mm/a, respectively, and their movement directions are 99.5°, 120.3°, 142.9° and 153.3°, respectively. All blocks exhibit clockwise rotation. The displacement rates of the Xianshuihe, Longmenshan, Anninghe, Zemuhe, Xiaojiang and Red River faults are（7.30±1.25–8.30±1.26） mm/a,（10.07±0.97–11.79±0.89） mm/a,（0.96±0.74–2.98±1.73） mm/a,（2.03±0.49–3.20±0.73） mm/a,（3.45±0.40–6.02±0.50） mm/a and（6.23±0.56） mm/a, respectively. The Xianshuihe, Anninghe, Zemuhe and Xiaojiang faults show leftlateral strike-slip movement, while the Longmenshan and Red River faults show right-lateral strikeslip. These characteristics of the blocks and faults are related to the particular tectonic location and dynamic mechanism.

Deformation field around a thrust fault:A comparison between laboratory results and GPS observations of the 2008 Wenchuan earthquake

On May 12,2008,an Mw7.9 earthquake occurred in Wenchuan County,Sichuan Province,China.Movement of Yingxiu–Beichuan Fault in the Longmenshan Fault Zone was considered to be the main cause of the earthquake.Earthquakes are closely related to fault activities.Therefore,studying the strain distribution and evolution process around active fault zones is important to the understanding of seismic activities.In this study,we conduct laboratory experiments with uniaxial compression applied to marble sheets with intentionally fabricated cracks.The speckle patterns of the rock samples under different loading conditions are recorded in real time by a digital camera.To calculate the deformation fields of the deliberately cracked marble sheets during different stages of the loading processes,the recorded images are processed by the digital image correlation method.The distribution and variation of the displacement and strain are further analyzed in order to understand the strain localization of and observed damage in the experimental fracture zones.Finally,we compare these laboratory results with the GPS-observed coseismic displacements during the 2008 Wenchuan earthquake,to assess the consistency between our laboratory observations and the field observations of the earthquake,but also to suggest how laboratory results can improve thinking about how earthquake patterns do and do not reflect fault patterns.

Segmentations of active normal dip-slip faults around Ordos block according to their surface ruptures in historical strong earthquakes

From the results of researches of active faults in resent years, a correlation analysis between segments of the faults according to surface ruptures in nine historical strong earthquakes occurring in downfaulted system and active structures around Ordos block is conducted in paper. The result shows that there is a good correlation between them, except few individual data that have more uncertain parameters. It shows that intensity and segments of surface ruptures in these strong earthquakes are intrinsically related with the active structures. These strong earthquakes produced stable and unstable rupture boundaries of characteristic-earthquake type and successive occurrence of strong earthquakes on the different boundary faults in the same tectonic unit.

The seismicity and tectonic stress field characteristics of the Longmenshan fault zone before the Wenchuan M_S8.0 earthquake

The seismicity of Longrnenshan fault zone and its vicinities before the 12 May 2008 Wenchuan Ms8.0 earthquake is studied. Based on the digital seismic waveform data observed from regional seismic networks and mobile stations, the focal mechanism solutions are determined. Our analysis results show that the seismicities of Longmenshan fault zone before the 12 May 2008 Wenchuan earthquake were in stable state. No obvious phenomena of seismic activity intensifying appeared. According to focal mechanism solutions of some small earthquakes before the 12 May 2008 Wenchuan earthquake, the direction of principal compressive stress P-axis is WNW-ESE. The two hypocenter fault planes are NE-striking and NW-striking. The plane of NE direction is among N50°-70°E, the dip angles of fault planes are 60°-70° and it is very steep. The faultings of most earthquakes are dominantly characterized by dip-slip reverse and small part of faultings present strike-slip. The azimuths of principal compressive stress, the strikes of source fault planes and the dislocation types calculated from some small earthquakes before the 12 May 2008 Wenchuan earthquake are in accordance with that of the main shock. The average stress field of micro-rupture along the Longmenshan fault zone before the great earthquake is also consistent with that calculated from main shock. Zipingpu dam is located in the east side 20 km from the initial rupture area of the 12 May 2008 Wenchuan earthquake. The activity increment of small earthquakes in the Zipingpu dam is in the period of water discharging. The source parameter results of the small earthquakes which occurred near the initial rupture area of the 12 May 2008 Wenchuan earthquake indicate that the focal depths are 5 to 14 km and the source parameters are identical with that of earthquake.

Exploration Strategies for Complex Fault Block Reservoirs in the Subei Basin

The geological background of the Subei basin is that of small relief subsidence, low geothermal gradient, multi-sedimentary hiatuses, intense reconstruction of the basin, frequent magmatic activity, and a unique combination of source rock and reservoir. This geological background resulted in characteristics such as many small fault blocks, multiple oil-bearing formations, scattered oil distribution, mini- to small-sized reservoirs, and difficulties in exploration. Aimed at such characteristics, an effective exploration strategy was adopted, and the oil reserves, production and economic benefits of the Jiangsu oilfield were significantly increased. This exploration strategy included understanding the hydrocarbon generation mechanism of source rocks, progressive evaluation of oil resources, comprehensive research on the faulted systems, the distribution of oil reservoirs and their controlling factors. The techniques used included integration of acquisition, processing and interpretation with 3-D seismics as the core technology, trap description and evaluation, directional drilling and cluster drilling, integration of cuttings logging, gas chromatographic logging and geochemical logging, and integration of early reservoir description and progressive exploration and development. This strategy could be guidance for other complex fault blocks.

Two-episode Tectono-thermal Events of the Heyuan Fault in Late Cretaceous and Oligocene and their Tectonic Implications, Southernmost South China Block

The Heyuan Fault, is one of the main NE-trending faults in the southernmost South China Block and is close to the northernmost South China Sea to the south. The fault features multi-stage deformation and controlled the formation of late Cretaceous to Cenozoic basins. Based on detailed field investigations and comprehensive geochronological research, including zircon U-Pb, Rb-Sr isochron, zircon U-Th-He dating, two episodic tectono-thermal events are recognized. The first occurred during ~79 Ma to 66 Ma, which is characterized by large-scale quartz-fluid emplacement. The other occurred at ~34 Ma, which features the eruption of a set of basalts. The two events show a changing on material source from siliceous hydrotherm to basalt magma, supporting obvious lithospheric thinning of the southernmost South China Block, which shed light on the geological evolution and the interaction mechanisms between the SCB and the northern South China Sea since the Late Cretaceous.

Numerical modeling of tectonic stress field and fault activity in North China

On the basis of a 3-dimension visco-elastic finite element model of lithosphere in North China, we numerically simulate the recent mutative figures of tectonic stress field. Annual change characteristics of stress field are： 1 ） Maximum principal tensile stress is about 3 -9 kPaa-1 and its azimuth lie in NNW-SSE. 2） Maximum principal compressive stress is about 1 - 6 kPaa-1 and its azimuth lie in NEE-SWW. 3 ） Maximum principal tensile stress is higher both in the west region and Liaoning Province. 4） Variation of tectonic stress field benefits fault movement in the west part and northeast part of North China. 5 ）Annual accumulative rates of Coulomb fracture stress in Tanlu fault belt have segmentation patterns： Jiashan-Guangji segment is the high- est （6 kPaa - 1 ） , Anshan-Liaodongwan segment is the second （5 kPaa - l ） , and others are relatively lower （ 3 - 4 kPaa-1 ）.

Influence of a drain field plate on the forward blocking characteristics of an AlGaN/GaN high electron mobility transistor

In this paper, the influence of a drain field plate （FP） on the forward blocking characteristics of an AlGaN/GaN high electron mobility transistor （HEMT） is investigated. The HEMT with only a gate FP is optimized, and breakdown voltage VBR is saturated at 1085 V for gate–drain spacing LGD ≥ 8 μm. On the basis of the HEMT with a gate FP, a drain FP is added with LGD=10 μm. For the length of the drain FP LDF ≤ 2 μm, VBR is almost kept at 1085 V, showing no degradation. When LDF exceeds 2 μm, VBR decreases obviously as LDF increases. Moreover, the larger the LDF, the larger the decrease of VBR. It is concluded that the distance between the gate edge and the drain FP edge should be larger than a certain value to prevent the drain FP from affecting the forward blocking voltage and the value should be equal to the LGD at which VBR begins to saturate in the first structure. The electric field and potential distribution are simulated and analyzed to account for the decrease of VBR.

The productivity evaluation model and its application for finite conductivity horizontal wells in fault block reservoirs

It is very difficult to evaluate the productivity of horizontal wells in fault block reservoirs due to the influence of fault sealing.On the basis of the method of images and source-sink theory,a semianalytical model coupling reservoir and finite conductivity horizontal wellbore flow dynamics was built,in which the influence of fault sealing was taken into account.The distribution of wellbore flow and radial inflow profiles along the horizontal interval were also obtained.The impact of the distance between the horizontal well and the fault on the well productivity was quantitatively analyzed.Based on this analysis,the optimal distance between the horizontal well and the fault in banded fault block reservoirs could be determined.According to the field application,the relative error calculated by the model proposed in this paper is within ±15%.It is an effective evaluation method for the productivity of horizontal wells in fault block reservoirs.The productivity of the horizontal well increases logarithmically as the distance between the horizontal well and the fault increases.The optimal distance between the horizontal well and the fault is 0.25-0.3 times the horizontal well length.

Effects of Surface Etch Hole Fault on the Velocity Field in Microchannel Reactors

Microchannel reactors are commonly used in micro-chemical technology. The performance of microreactors is greatly affected by the velocity field in the microchannel. The flow field is disturbed by the cylindrical etch holes caused by air dust on the microchannel surface during its processing procedure. In this approach, a two-dimensional computational fluid dynamics （CFD） model is put forward to study the effect of etch holes on flow field. The influenced area of single or two concave etch holes is studied for the case of laminar flow. The hole diameter, the Reynolds number and the distance between the center of holes are found to have influences on the flow field. Numerical results indicate that the effects of etch hole on the flow field should be evaluated and the way of choosing the economic class of cleanroom for microreactor manufacture is presented.

Effects of fault movement and material properties on deformation and stress fields of Tibetan Plateau

We compare the factors which affect the movement of Tibetan Plateau by building three types of finite element models： an elastic materials （M-EC）, a continuous model composed by non-linear materials （M-PC）, and an elastic model with discontinuous fault movements （M-ET）. Both in M-ET and M-EC, the materials in Qiangtang and Lhasa block are elastic, and in M-ET, discontinuous movement of faults is considered for evaluating the effects of strike-slip faults. In model M-PC Druker-Prager plastic materials are used in Qiangtang and Lhasa block. Comparisons of the numerical simulation and the GPS observations show following characteristics： （1） Under present tectonic environment, short-term deformation of Tibetan Plateau can be simulated well by elastic models; （2） Discontinuous fault activities increase the lateral extrusion of the eastern part of Tibetan Plateau, reduce the stress field level in Qiangtang, Tarim and Qaidam blocks and strengthen the E-W extensional force in the east and the west parts of Qiangtang block; （3） Properties of plastic materials reduce the total stress field and the E-W extensional force, thus, the normal fault earthquakes in southern Tibet is mainly owed to the effect of active fault movement. Based on the numerical simulations we speculate that faults movement may play a more important role on the kinematic pattern of Tibetan Plateau than bulk properties.

A study on characteristics of tectonic block motion and tectonic setting of strong earthquakes in northern part of the Shanxi fault depression zone

This paper makes a systematical study on characteristics of structure and motion of the tectonic blocks in northern part of the Shanxi fault depression zone by means of geometrical and kinematical analysis of the blocks. The ki-netic behavior of the blocks is discussed by comparing associated geomorphic features of fault movement. All analyses and studies are based on a Domino model. The block movement, fault basin extension and their regional distribution are systematically investigated. The result shows: (a) The studied region is divided into sub-regions by NW striking faults: the western, middle and eastern sub-region with crustal extension being 4.46 km, 2.80 km and 1.86 km, respectively. The extensional amount of each block in the region is estimated being generally about 1 km. The calculated result using the block motion model approximately fits the data of geologic survey. (b) Block kin-ematical features are obviously different between the northern and southern part, with the Hengshan block in be-tween, of the studied region. Moreover, the magnitude of the largest historical earthquake in the northern part is about 6, while that in the southern is 7. The faulted blocks in the northern sub-region show northwestward exten-sion, indicating a feature of extensional graben, while the blocks in the southern part manifest tilt motion, extend-ing southeastward, in the opposite sense of fault dipping. Additional tectonic stress generated by block rotation may be one of major factors affecting seismogenic process in the region. It is responsible for the difference in the movement of the block boundary faults and seismic activities between the two sub-regions.

The stress field variation caused by faulting and the prediction for seismic risk

The stress field caused by faulting has an effect on the stability of the neighboring faults, and the study on the fault interaction has a close relation with the prediction of seismic risk. Stress field caused by the rectangle fault in the semi-infinite elastic medium is calculated on the basis of the elastic dislocation theory. The result shows that most of the successive large earthquakes, in the southwestern part of China and North China, occurred in the increasing area of shear stress S(xy) and the decreasing area of normal stress S(yy) The increasing of earthquake occurrence probability has a function relation with the increasing of stress. Earthquake triggering is resulted from the increasing of shear stress and the decreasing of normal stress. An activation coefficient A, of the earthquake is defined to express the change of seismic activity. The concrete risk region can be obtained through space scanning of At value. Finally, the fault interaction in a large scope is discussed in this paper.

Characterizing and Analyzing the Airflow Field inside the Nozzle Block of Murata Vortex Spinning

A three-dimensional computational fluid dynamics model is developed by software Fluent 6.2, to simulate the flow field inside the nozzle block of the Murata vortex spinning. The flowing state and the distribution law of static pressure and velocity are characterized and analyzed. The relationship between the flowing state and the structure of the vortex spun yarn is also discussed. The research results can enhance the understanding of the yarn formation principle from viewpoint of the airflow field law inside the nozzle block of Murata vortex spinning.

Study of fault configuration related mysteries through multi seismic attribute analysis technique in Zamzama gas field area,southern Indus Basin,Pakistan

Seismic attribute analysis approach has been applied for the interpretation and identification of fault geometry of Zamzama Gas Field. Zamzama gas field area, which lies in the vicinity of Kirthar fold and thrust belt, Southern Indus Basin of Pakistan. The Zamzama fault and its related structure have been predicted by applying the Average Energy Attribute, Instantaneous Frequency Attribute, relative Acoustic Impedance Attribute and Chaotic Reflection Attribute on the seismic line GHPK98 A.34. The results have been confirmed by applying the spectral decomposition attribute on the same seismic line that reveal the geometric configuration of Zamzama structure. The fault is reverse and started from 0 s and ended at the depth of 2.5 s on the vertical seismic section. Hanging wall moves up along the fault plane under the action of eastward oriented stress, which formed a large northesouth oriented and eastward verging thrusted anticline.

Focal Fault and Stress Field of the Yao'an M 6.5 Earthquake on January 15, 2001

Using the 78 focal mechanism solutions of the fore shocks, main shock and after shocks of the earthquake sequence for the Yao’an earthquake, the characteristics of the focal faults and stress field for the earthquake sequence are analyzed. The results show that the main rupture plane of the Yao’an earthquake sequence is a tectonic fault with N50°W strike and steep dip and all the main shock, the fore shocks and the vast majority of after shocks occurred on the main rupture plane. A tectonic fracture with NNE-NE strike also participated in development process of the sequence. The focal stress field of the sequence dominated by principal compressional stress with nearly horizontal orientation SSE is consistent with the regional tectonic stress field. In the sequence development, the stress field in the focal region was complex with multi-azimuths and multi-action models and the focal rupture showed complex features with multi-directions and multi-patterns.