Seismic Facies in a Deepwater Area of a Marine Faulted Basin:Deepwater Area of the Paleogene Lingshui Formation in the Qiongdongnan Basin

In recent years, deep water areas have become popular exploration fields because of their abundant hydrocarbon resource potential. There are only relatively poor planar seismic profiles and no wells for deepwater areas of the Lingshui Formation in the Qiongdongnan Basin. A lot of faults developed and strata are fragmented due to high temperatures and high pressure, and this has resulted in dim sequence boundaries. Based on seismic data of the deepwater area and well data of bordering shallow water areas, Lingshui Formation was divided into four third class sequences; namely SI, SII, SIII and SIV, and the three-dimensional isochronous stratigraphic framework of the Lingshui Formation in the studied area was shaped. Based mainly on seismic attributes such as amplitude, continuity, internal structure and external shape, six typical seismic facies were identified, including mat-shaped, filling, wedge-shaped, foreset, moundy-shaped and lenticular-shaped, and a seismic facies distribution map was subsequently drawn. With studies on wells of bordering shallow water areas, regional sedimentary characteristics, and isopach map as references, sedimentary planar distribution features were analyzed. The deepwater area of the Lingshui Formation has mainly developed littoral and shallow sea. Sandstone bodies of fan delta, braided river delta, slope fan, basin floor fan, and turbidite fan are at an interdigitate junction to marine hydrocarbon source rocks and thus are favorable prospecting targets.

A Newly Discovered Oil-bearing Mesoproterozoic Erathem within the Niu D1 Well, Liaoxi Depression, Yanliao Faulted Depression Zone, NE China

Objective The Yanshan Fold Belt is located within the northern margin of the North China platform and contains welldeveloped and widespread Neoproterozoic and Mesoproterozoic sedimentary units with a total thickness of up to 9000 m.Previous studies identified many oil seedlings as well as asphalt and ancient hydrocarbon reservoirs in Northern Hebei depression and western Liaoning depression.This research indicates that the Mesoproterozoic and Neoproterozoic sedimentary units are ideally suited for the formation of significant oil and gas resources.The Niu D1 well was drilled by the China Geological Survey(CGS)in the Niuyingzi area and intercepted oil immersions and oil-and gas-bearing units within a limestone reservoir in the middle Proterozoic Gaoyuzhuang Formation(Fig.1).This study presents new biomarker compound and carbon isotope data that indicate that the oil within this formation was derived from hydrocarbon source rocks of the Hongshuizhuang Formation,part of the Mesoproterozoic Jixian Series,and the reservoir type is overthrust fault fractured anticline hydrocarbon reservoir.The oil reservoir within the Gaoyuzhuang Formation limestone might represent the oldest oil reservoir discovered to date within the Yanliao faulted depression zone.

Logging interpretation method for reservoirs with complex pore structure in Mesozoic-Cenozoic faulted basin around Daqing exploration area

In Mesozoic-Cenozoic faulted basin in the periphery of Daqing exploration area, the clastic reservoirs mainly consist of siltstone and gravel-bearing sandstone. The electrical conductivity of the reservoirs is complicated due to the complex pore structures, which cannot be accurately interpreted with commonly used model. In order to solve the problem, a three-water model has been applied in this study based on in-depth analysis of the conductive mechanism of rocks in the explored area, and favorable application results are achieved.

Natural Gas Resource in Jurassic,Y Faulted Subbasin of Songliao Basin

Y faulted depression is located in the southeast of Songliao basin, which is another important area explored for natural gas in deep Formation after Xujiaweizi. But it is lowly explored and is not likely to make a major breakthrough in nature gas exploration for shallow and medium layers. The data on the geochemistry and geology indicate that the deep source rocks, especially the Jurassic mudstone has great potentials of natural gas generation. Based on this, the paper examines the conditions of natural gas generation and further points out the favorable prospective gas - bearing area. The results show that the amount of natural gas generated from the Jurassic mudstone in the Y faulted depression is 8. 42x1012m3 and the favorable gas - generating area is the body of the faulted depression.

New Recognition about Faulted Structures in Tarim Basin

ＮｅｗＲｅｃｏｇｎｉｔｉｏｎａｂｏｕｔＦａｕｌｔｅｄＳｔｒｕｃｔｕｒｅｓｉｎＴａｒｉｍＢａｓｉｎＩｎｐａｓｔｔｈｒｅｅｙｅａｒｓ，ｔｈｅｃｏｍｐｒｅｈｅｎｓｉｖｅｐｅｔｒｏｌｅｕｍｇｅｏｌｏｇｉｃａｌｔｅａｍｏｆｔｈｅＭｉｎｉｓｔｒｙｏｆＧｅｏｌｏｇ...

Is clustered seismicity an indicator of regional stress?Insights from earthquake sequences in Yongning-Luguhu faulted basin,Southwest China

Using hypocenter relocation,moment tensor inversion,stress field inversion,and fault slip tendency analysis,this study systematically investigated three M5.5-5.8 earthquake sequences that occurred after 2000 in the Yongning-Luguhu faulted basin in the middle of the Lijiang-Xiaojinhe fault zone within the Sichuan-Yunnan block,Southwest China.Our results show that since the 2008 Wenchuan earthquake,the tectonic stress pattern in this area may have changed and that b-values estimated for the earthquake sequences show evidence of an increasing trend in stress in the study area.Seismicity in the small-scale faulted basin adjacent to the large-scale fault zone is a possible indicator of regional stress.We also note that the aftershocks of the M5.7 earthquake sequence in 2012 and the M5.5 earthquake sequence in 2022 show relatively clear fluid diffusion-triggering characteristics.Overpressure of deep fluids is still the main factor driving seismic activity in the region,and we propose that the background tectonic stresses have not yet reached critical levels.

Three-dimensional analysis of a faulted CO2 reservoir using an Eshelby-Mori-Tanaka approach to rock elastic properties and fault permeability

This work develops a three-dimensional(3D) multiscale model to analyze a complex carbon dioxide(CO_2) faulted reservoir that includes some key geologic features of the San Andreas and nearby faults southwest of the Kimberlina site.The model uses the STOMP-CO2 code for flow modeling that is coupled to the ABAQUS~ finite element package for geomechanical analysis.A 3D ABAQUS~ finite element model is developed that contains a large number of 3D solid elements with two nearly parallel faults whose damage zones and cores are discretized using the same continuum elements.Five zones with different mineral compositions are considered:shale,sandstone,fault damaged sandstone,fault damaged shale,and fault core.Rocks' elastic properties that govern their poroelastic behavior are modeled by an Eshelby-Mori-Tanaka approach(EMTA).which can account for up to 15 mineral phases.The permeability of fault damage zones affected by crack density and orientations is also predicted by an EMTA formulation.A STOMP-CO2 grid that exactly maps the ABAQUS~ finite element model is built for coupled hydromechanical analyses.Simulations of the reservoir assuming three different crack pattern situations(including crack volume fraction and orientation) for the fault damage zones are performed to predict the potential leakage of CO_2 due to cracks that enhance the permeability of the fault damage zones.The results illustrate the important effect of the crack orientation on fault permeability that can lead to substantial leakage along the fault attained by the expansion of the CO_2 plume.Potential hydraulic fracture and tendency for the faults to slip are also examined and discussed in terms of stress distributions and geomechanical properties.

Fractal Features and Computer Simulation of Fan-Shaped Sedimentary Bodies in Faulted Basins

Ｆａｎ－ｓｈａｐｅｄｓｅｄｉｍｅｎｔａｒｙｂｏｄｉｅｓａｒｅｔｈｏｓｅｍａｉｎｌｙｃｏｍ－ｐｏｓｅｄｏｆｔｅｒｉｇｅｎｏｕｓｃｏａｒｓｅｄｅｐｏｓｉｔｓａｎｄｂｅｉｎｇｆａｎ－ｓｈａｐｅｄｉｎｍｏｒｐｈｏｌｏｇｙ，ｉｎｃｌｕｄｉｎｇａｌｕｖｉａｌｆａ...

New views of tectonic evolution in the Tonghua, Liuhe and Hongmiaozi residual faulted basins, Northeast China

1.Objectives The research and prospecting degree of these Mesozoic residual faulted basins located in Tonghua and its peripheral areas,such as Tonghua basin,Liuhe basin and Hongmiaozi basin is low.And these basins are considered to be unified sedimentary basins during the Mesozoic(Fig.1).For example,Zhang FQ et al.(2012)believe that the Liuhe basin,Tonghua basin and Yangzishao basin belong to“Great Liuhe basin”which developed under the Xilonggang nappe.According to the research of Xu HL et al.(2013),the Tonghua basin and Liuhe basin began to connect and then formed a unified sedimentary area during the sedimentary period of Linzitou Formation(equivalent to the Xiahuapidianzi Formation).

Pressure Transient Analysis of an Intersecting Rollover Faulted Crest Boundary in Niger Delta Oil Field

Pressure transient analysis has been extensively applied to detect anomalies in a reservoir system.These anomalies may be presented in the form of an intersection of the crestal and the antithetic fault associated with a growth fault.Interpretation of this fault can only be achieved through the use of pressure transient analysis.The objective of the research work is to analyze and test the faulted crest,depth of the anticline structure and examine the near well bore conditions in order to evaluate whether the well productivity is governed by wellbore effects(skin effects+well bore effect)or the reservoir at large.A case study of a well in the Niger delta is considered with a series of build up test carried out in two intervals of both upper and lower gauge readings.In this study,a computer aided design which uses a pressure derivative approach is used in this work to match the pressure derivative of an intersecting fault(angle)model to the field data,and the model assumes the characteristics of the reservoir.Based on the result of the interpreted data,simulation is done by using a non linear regression method(least square).The simulated data interpreted are achieved through the regression coefficient which provides a quantitative measure of the agreement between field data and the model.In conclusion,the best cases are taken from all the results and a nodal analysis is performed to diagnose the inflow performance of the well through the transient analysis in order to optimize the recovery of the oilfield.

The MW5.5 earthquake on August 6,2023,in Pingyuan,Shandong,China:A rupture on a buried fault

On August 6,2023,a magnitude MW5.5 earthquake struck Pingyuan County,Dezhou City,Shandong Province,China.This event was significant as no large earthquakes had been recorded in the region for over a century,and no active fault had been previously identified.This study collects 1309 P-wave arrival times and 866 S-wave arrival times from 74 seismic stations less than 200 km to the epicenter to constrain the spatial distribution of the mainshock and its 125 early aftershocks by the double difference earthquake relocation method,and selects 864 P-waveforms from 288 stations located within 800 km of the epicenter to constrain the focal mechanism solution of the mainshock through centroid moment tensor inversion.The relocation and the inversion indicate,the Pingyuan MW5.5 earthquake was caused by a rupture on a buried fault,likely an extensive segment of the Gaotang fault.This buried fault exhibited a dip of approximately 75°to the northwest,with a strike of 222°,similar to the Gaotang fault.The rupture initiated at the depth of 18.6 km and propagated upward and northeastward.However,the ground surface was not broken.The total duration of the rupture was~6.0 s,releasing the scalar moment of 2.5895×1017 N·m,equivalent to MW5.54.The moment rate reached the maximum only 1.4 seconds after the rupture initiation,and the 90%scalar moment was released in the first 4.6 s.In the first 1.4 seconds of the rupture process,the rupture velocity was estimated to be 2.6 km/s,slower than the local S-wave velocity.As the rupture neared its end,the rupture velocity decreased significantly.This study provides valuable insights into the seismic characteristics of the Pingyuan MW5.5 earthquake,shedding light on the previously unidentified buried fault responsible for the seismic activity in the region.Understanding the behavior of such faults is crucial for assessing seismic hazards and enhancing earthquake preparedness in the future.

Expert Experience and Data-Driven Based Hybrid Fault Diagnosis for High-SpeedWire Rod Finishing Mills

The reliable operation of high-speed wire rod finishing mills is crucial in the steel production enterprise.As complex system-level equipment,it is difficult for high-speed wire rod finishing mills to realize fault location and real-time monitoring.To solve the above problems,an expert experience and data-driven-based hybrid fault diagnosis method for high-speed wire rod finishing mills is proposed in this paper.First,based on its mechanical structure,time and frequency domain analysis are improved in fault feature extraction.The approach of combining virtual value,peak value with kurtosis value index,is adopted in time domain analysis.Speed adjustment and side frequency analysis are proposed in frequency domain analysis to obtain accurate component characteristic frequency and its corresponding sideband.Then,according to time and frequency domain characteristics,fault location based on expert experience is proposed to get an accurate fault result.Finally,the proposed method is implemented in the equipment intelligent diagnosis system.By taking an equipment fault on site,for example,the effectiveness of the proposed method is illustrated in the system.

Organic Geochemical and Fluid Inclusion Evidence for Filling Stages of Natural Gas and Bitumen in Volcanic Reservoir of Changling Faulted Depression,Southeastern Songliao Basin

Recently,volcanic gas reservoirs in Yaoyingtai （腰英台） and Daerhan （达尔罕） tectonic belts in Changling （长岭） faulted depression of southeastern Songliao （松辽） basin have been discovered.Based on the compositions and isotopic values,the natural gas is characterized by high content of methane,low content of C2＋,and C1/C1-5 beyond 0.95.Also,the natural gas contains nonhydrocarbons including carbon dioxide with the content from 20% to 40% and minor amount of N2.Combined with the isotopic values,the natural gas is generated by humic kerogen and coal-derived type,but in Daerhan,the natural gas is probably mixed by oil type gas.From the measurement of lithology and fluid inclusions in volcanic rocks,the bitumen,liquid hydrocarbon,and gas hydrocarbon inclusions are present.Through the analysis of the single gas inclusion in volcanic reservoir,the content of carbon dioxide is low,so the carbon dioxide and hydrocarbon gas of the reservoirs are not accumulated at the same time.In addition,minor amount of bitumen in the reservoirs is formed by thermal evolution of the crude oils sourced from the Yingcheng （营城） Formation mudstones through the characterizations of the biomarkers.The distribution of homogenization temperatures presents two peaks,one with the liquid hydrocarbon filling stage,and the other with gas filling stage.However,in Daerhan tectonic belt,the second peak is gas and carbon dioxide mixed filling period probably.Combined with the homogenization temperatures of salt water inclusions,the oil and gas filling period is from Qingshankou （青山口） Formation to Nenjiang （嫩江） Formation in the research area.During the charging period,minor amount of inorganic carbon dioxide filled into the trap,but plenty of inorganic carbon dioxide from the end of Sifangtai （四方台） to Eogene periods was related with the structural movement.

Formation mechanism of fault accommodation zones under combined stress in graben basin:Implications from geomechanical modeling

A fault accommodation zone is a type of structure that is defined as regulating displacement and strain between faults structure.Increasing numbers of fault accommodation zones are being identified in graben basins,indicating the potential exploration target and petroleum accumulation areas.This study aims to analyze the formation mechanism and development of fault accommodation zones under combined stress by a numerical simulation method considering geomechanical modeling.Using three-dimensional(3-D)seismic interpretation and fractal dimension method,exampled with the Dongxin fault zone,the fault activity and fault combination pattern were conducted to quantitatively characterize the activity difference in fault accommodation zones.Combined with mechanical experiment test,a geomehcanical model was established for fault accommodation zones in a graben basin.Integrating the paleostress numerical simulations and structural physical simulation experiment,the developmental characteristics and genetic mechanism of fault accommodation zones were summarized.Influenced by multi movements and combined stresses,three significant tectonic evolution stages of the Dongxing Fault Zone(DXFZ)were distinguished:During the E_(s)^(3)sedimentary period,the large difference in the stress,strain,and rupture distribution in various faults were significant,and this stage was the key generation period for the prototype of the DXFZ,including the FAZ between large-scale faults.During the E_(s)^(2)sedimentary period,the EW-trending symmetric with opposite dipping normal faults and the NE-SW trending faults with large scale were furtherly developed.The junction area of two secondary normal faults were prone to be ruptured,performing significant period for inheriting and developing characteristics of fault accommodation zones.During the Es1 sedimentary period,the high-order faults in the DXFZ exhibited the obvious fault depressions and strike-slip activity,and the fault accommodation zones were furtherly inherited and developed.This stage was the molded and formative period of the FAZ,the low-order faults,and the depression in the DXFZ.

Characterization and spatial analysis of coseismic landslides triggered by the Luding Ms 6.8 earthquake in the Xianshuihe fault zone, Southwest China

On September 5, 2022, a magnitude Ms 6.8 earthquake occurred along the Moxi fault in the southern part of the Xianshuihe fault zone located in the southeastern margin of the Tibetan Plateau,resulting in severe damage and substantial economic loss. In this study, we established a coseismic landslide database triggered by Luding Ms 6.8 earthquake, which includes 4794 landslides with a total area of 46.79 km^(2). The coseismic landslides primarily consisted of medium and small-sized landslides, characterized by shallow surface sliding. Some exhibited characteristics of high-position initiation resulted in the obstruction or partial obstruction of rivers, leading to the formation of dammed lakes. Our research found that the coseismic landslides were predominantly observed on slopes ranging from 30° to 50°, occurring at between 1000 m and 2500 m, with slope aspects varying from 90° to 180°. Landslides were also highly developed in granitic bodies that had experienced structural fracturing and strong-tomoderate weathering. Coseismic landslides concentrated within a 6 km range on both sides of the Xianshuihe and Daduhe fault zones. The area and number of coseismic landslides exhibited a negative correlation with the distance to fault lines, road networks, and river systems, as they were influenced by fault activity, road excavation, and river erosion. The coseismic landslides were mainly distributed in the southeastern region of the epicenter, exhibiting relatively concentrated patterns within the IX-degree zones such as Moxi Town, Wandong River basin, Detuo Town to Wanggangping Township. Our research findings provide important data on the coseismic landslides triggered by the Luding Ms 6.8 earthquake and reveal the spatial distribution patterns of these landslides. These findings can serve as important references for risk mitigation, reconstruction planning, and regional earthquake disaster research in the earthquake-affected area.

An integrated north–south paleo-Dadu-Anning River: New insights from bulk major and trace element analyses of the Xigeda Formation

The Xianshuihe-Anninghe fault extends SE–S and constitutes the southeastern margin of the Tibetan Plateau.However,the Dadu River which is associated with the fault does not flow following the path,but makes a 90ºturn within a distance of 1 km at Shimian,heading east,and joins the Yangtze River,finally flowing into the East China Sea.Adjacent to the abrupt turn,a low and wide pass near the Daqiao reservoir at Mianning separates the N–S course of the Dadu River from the headwater of the Anning River which then flows south into the Yunnan Province along the Anninghe fault.Therefore,many previous studies assumed southward flow of the paleo-Dadu River from the Shimian to the Anning River.However,evidences for the capture of the integrated N–S paleo-Dadu-Anning River,its timing,and causes are still insufficient.This study explored the paleo-drainage pattern of the Dadu and Anning Rivers based on bulk mineral and geochemical analyses of the large quantities of fluvial/lacustrine sediments along the trunk of the Dadu and Anning Rivers.Similar with sands in the modern Dadu River,the Xigeda sediments also exhibit a granitoid affinity with the bulk major mineral compositions of quartz(>50%),anorthite(about 10%),orthoclase(about 5%),muscovite(about 5%),and clinochlore(about 4%).Correspondingly,bulk major elements show high SiO_(2),with all samples>60%,and some of them>70%,low TiO_(2)(≤0.75%),P_(2)O_(5)(≤0.55%),FeO*(≤5%),and relatively high CaO(1.02%–8.51%),Na_(2)O(1.60%–2.52%),and K_(2)O(2.17%–2.71%),with a uniform REE patterns.Therefore,synthesizing all these results indicate that these lacustrine sediments have similar material sources,which are mainly derived from its course in the Songpan-Ganzi flysch block,implying that the paleo-Dadu originally flowed southward into the Anning River and provided materials to the Xigeda ancient lake.The rearrangement of the paleo-Dadu River appears to be closely related to the locally focused uplift driven by strong activities of the XianshuiheXiaojiang fault system.

An Insight Survey on Sensor Errors and Fault Detection Techniques in Smart Spaces

The widespread adoption of the Internet of Things (IoT) has transformed various sectors globally, making themmore intelligent and connected. However, this advancement comes with challenges related to the effectiveness ofIoT devices. These devices, present in offices, homes, industries, and more, need constant monitoring to ensuretheir proper functionality. The success of smart systems relies on their seamless operation and ability to handlefaults. Sensors, crucial components of these systems, gather data and contribute to their functionality. Therefore,sensor faults can compromise the system’s reliability and undermine the trustworthiness of smart environments.To address these concerns, various techniques and algorithms can be employed to enhance the performance ofIoT devices through effective fault detection. This paper conducted a thorough review of the existing literature andconducted a detailed analysis.This analysis effectively links sensor errors with a prominent fault detection techniquecapable of addressing them. This study is innovative because it paves theway for future researchers to explore errorsthat have not yet been tackled by existing fault detection methods. Significant, the paper, also highlights essentialfactors for selecting and adopting fault detection techniques, as well as the characteristics of datasets and theircorresponding recommended techniques. Additionally, the paper presents amethodical overview of fault detectiontechniques employed in smart devices, including themetrics used for evaluation. Furthermore, the paper examinesthe body of academic work related to sensor faults and fault detection techniques within the domain. This reflectsthe growing inclination and scholarly attention of researchers and academicians toward strategies for fault detectionwithin the realm of the Internet of Things.

Advances in seismological methods for characterizing fault zone structure

Large earthquakes frequently occur along complex fault systems.Understanding seismic rupture and long-term fault evolution requires constraining the geometric and material properties of fault zone structures.We provide a comprehensive overview of recent advancements in seismological methods used to study fault zone structures,including seismic tomography,fault zone seismic wave analysis,and seismicity analysis.Observational conditions limit our current ability to fully characterize fault zones,for example,insufficient imaging resolution to discern small-scale anomalies,incomplete capture of crucial fault zone seismic waves,and limited precision in event location accuracy.Dense seismic arrays can overcome these limitations and enable more detailed investigations of fault zone structures.Moreover,we present new insights into the structure of the Anninghe-Xiaojiang fault zone in the southeastern margin of the Qinghai-Xizang Plateau based on data collected from a dense seismic array.We found that utilizing a dense seismic array can identify small-scale features within fault zones,aiding in the interpretation of fault zone geometry and material properties.

Experimental investigation on the origin of carbonaceous materials in the fault zone of the Wenchuan earthquake

Carbonaceous materials in seismic fault zones may considerably influence seismic fault slip;however,the formation mechanism of carbonaceous materials remains unclear.In this study,we proposed a novel hypothesis for the formation of carbonaceous materials in fault gouge.Thus,we conducted a CO2 hydrogenation experiment in a high-temperature reactor at a co-seismic temperature,with fault gouge formed during the Wenchuan earthquake as the catalyst.Our experimental results demonstrate that carbonaceous materials in fault zones are formed on the fault gouge during the chemical reaction process,suggesting that the carbonaceous materials are possibly generated from the catalytic hydrogenation of CO2,followed by thermal cracking of its products.The results of this study provide a theoretical basis for understanding fault behavior and earthquake physics.

Platform Evolution in an Oligo-Miocene Back-arc Basin:An Example from the Central Iran Basin

The Qom Formation is the most important hydrocarbon reservoir target in Central Iran.The Qom platform developed in a back-arc basin during the Oligo-Miocene due to the closing of the Tethyan Seaway.This formation consists of a variety of carbonate and non-carbonate facies deposited on a platform ranging from supratidal to basin.A combination of tectonic and eustatic events led to some lateral and vertical facies variations in the study area.Six third-order depositional sequences and related surfaces were identified regarding vertical facies changes in the studied sections of this Oligo-Miocene succession.According to all results and data,this succession was initially deposited during the Chattian upon a distally steepened ramp of siliciclastic-carbonate composition,including the Bouma sequence.Then,from the late Chattian to the Aquitanian,the platform changed into a homoclinal carbonate ramp with a gentle profile.With respect to tectonic activity,this phase was a calm period during the deposition of the Qom Formation.Finally,a drowned carbonate platform and a rimmed shelf emerged during the Burdigalian,terminated by the continental deposits of the Upper Red Formation.Regarding all geological characteristics,three main tectono-eustatic evolutionary phases have been recognized in the Qom back-arcbasin.