基于中国女性参考人曲面模型建立女性蹲姿曲面模型,采用蒙特卡罗方法,针对6种标准光子外照射几何,计算光子能量0.01~10 Me V范围内21个能量点的器官吸收剂量转换系数和有效剂量转换系数,并与直立姿势的剂量数据进行了对比。结果表明:...基于中国女性参考人曲面模型建立女性蹲姿曲面模型,采用蒙特卡罗方法,针对6种标准光子外照射几何,计算光子能量0.01~10 Me V范围内21个能量点的器官吸收剂量转换系数和有效剂量转换系数,并与直立姿势的剂量数据进行了对比。结果表明:两种姿势中某些器官的吸收剂量转换系数在前后、后前以及侧向照射方式下差异较大。其中,后前照射方式下,光子能量为0.03 Me V时,乳腺的吸收剂量转换系数比直立姿势高115.1%。在不同照射方式下,大部分能量点的有效剂量转换系数的差异在10%范围内。转换系数的差异主要是由于胳膊和腿位置的改变,以及蹲姿时因身体前倾造成器官在照射方向上厚度发生改变而产生的。展开更多
An advanced geometric modeler GEMS4.0 has been developed, in whichfeature representation is used at the highest level abstraction of a productmodel. Boundary representation is used at the bottom level, while CSG model...An advanced geometric modeler GEMS4.0 has been developed, in whichfeature representation is used at the highest level abstraction of a productmodel. Boundary representation is used at the bottom level, while CSG modelis adopted at the median level. A BRep data structure capable of modelingnon-manifold is adopted. NURBS representation is used for all curved surfaces.Quadric surfaces have dual representations consisting of their geometric datasuch as radius, center point, and center tals. Boundary representation of freeform surfaces is easily built by sweeping and skinning method with NURBSgeometry Set operations on curved solids with boundary representation areperformed by an evaluation process consisting of four steps. A file exchangefacility is provided for the conversion between product data described by STEPand product information generated by GEMS4.0展开更多
文摘基于中国女性参考人曲面模型建立女性蹲姿曲面模型,采用蒙特卡罗方法,针对6种标准光子外照射几何,计算光子能量0.01~10 Me V范围内21个能量点的器官吸收剂量转换系数和有效剂量转换系数,并与直立姿势的剂量数据进行了对比。结果表明:两种姿势中某些器官的吸收剂量转换系数在前后、后前以及侧向照射方式下差异较大。其中,后前照射方式下,光子能量为0.03 Me V时,乳腺的吸收剂量转换系数比直立姿势高115.1%。在不同照射方式下,大部分能量点的有效剂量转换系数的差异在10%范围内。转换系数的差异主要是由于胳膊和腿位置的改变,以及蹲姿时因身体前倾造成器官在照射方向上厚度发生改变而产生的。
文摘An advanced geometric modeler GEMS4.0 has been developed, in whichfeature representation is used at the highest level abstraction of a productmodel. Boundary representation is used at the bottom level, while CSG modelis adopted at the median level. A BRep data structure capable of modelingnon-manifold is adopted. NURBS representation is used for all curved surfaces.Quadric surfaces have dual representations consisting of their geometric datasuch as radius, center point, and center tals. Boundary representation of freeform surfaces is easily built by sweeping and skinning method with NURBSgeometry Set operations on curved solids with boundary representation areperformed by an evaluation process consisting of four steps. A file exchangefacility is provided for the conversion between product data described by STEPand product information generated by GEMS4.0