Indirect Vector Control of Linear Induction Motors Using Space Vector Pulse Width Modulation

Vector control schemes have recently been used to drive linear induction motors(LIM)in high-performance applications.This trend promotes the development of precise and efficient control schemes for individual motors.This research aims to present a novel framework for speed and thrust force control of LIM using space vector pulse width modulation(SVPWM)inverters.The framework under consideration is developed in four stages.To begin,MATLAB Simulink was used to develop a detailed mathematical and electromechanical dynamicmodel.The research presents a modified SVPWM inverter control scheme.By tuning the proportional-integral(PI)controller with a transfer function,optimized values for the PI controller are derived.All the subsystems mentioned above are integrated to create a robust simulation of the LIM’s precise speed and thrust force control scheme.The reference speed values were chosen to evaluate the performance of the respective system,and the developed system’s response was verified using various data sets.For the low-speed range,a reference value of 10m/s is used,while a reference value of 100 m/s is used for the high-speed range.The speed output response indicates that themotor reached reference speed in amatter of seconds,as the delay time is between 8 and 10 s.The maximum amplitude of thrust achieved is less than 400N,demonstrating the controller’s capability to control a high-speed LIM with minimal thrust ripple.Due to the controlled speed range,the developed system is highly recommended for low-speed and high-speed and heavy-duty traction applications.

Parameter estimation method for a linear frequency modulation signal with a Duffing oscillator based on frequency periodicity

In view of the complexity of existing linear frequency modulation(LFM)signal parameter estimation methods and the poor antinoise performance and estimation accuracy under a low signal-to-noise ratio(SNR),a parameter estimation method for LFM signals with a Duffing oscillator based on frequency periodicity is proposed in this paper.This method utilizes the characteristic that the output signal of the Duffing oscillator excited by the LFM signal changes periodically with frequency,and the modulation period of the LFM signal is estimated by autocorrelation processing of the output signal of the Duffing oscillator.On this basis,the corresponding relationship between the reference frequency of the frequencyaligned Duffing oscillator and the frequency range of the LFM signal is analyzed by the periodic power spectrum method,and the frequency information of the LFM signal is determined.Simulation results show that this method can achieve high-accuracy parameter estimation for LFM signals at an SNR of-25 dB.

Gauss linear frequency modulation wavelet transforms and its application to seismic phases identification

Based on the characteristics of gradual change style seismic signal onset which has more high frequency signal components but less magnitude, this paper selects Gauss linear frequency modulation wavelet as base function to study the change characteristics of Gauss linear frequency modulation wavelet transform with difference wavelet and signal parameters, analyzes the error origin of seismic phases identification on the basis of Gauss linear frequency modulation wavelet transform, puts forward a kind of new method identifying gradual change style seismic phases with background noise which is called fixed scale wavelet transform ratio, and presents application examples about simulation digital signal and actual seismic phases recording onsets identification.

Periodic Modulation of Nonlinearity in a Two-Core Photonic Crystal Fiber: A Numerical Investigation

We present a numerical investigation of the propagation and the switching of ultra-short pulses (100 fs) in a two-core nonlinear coupler of photonic crystal fibers constructed with periodically modulated the non-linearity fiber (PMNL-PFC). Our simulations are taking into account different amplitude and frequency modulations of the PMNL-PFC. A coupler for coupling whose length is Lc = 1.8 cm, the transmission characteristics, the compression factor, the crosstalk (Xtalk) and extinction ratio (Xratio) levels of the first order solitons were studied for low to high pump energies considering 2Lc. By an analysis on the reference channel (channel 2), it is observed that at low modulation frequencies an increase occurs in the switching power increasing transmission efficiency. For high modulation frequencies, the transmitted energy efficiency loses. The switching pulses are stronger for low frequency and high amplitude modulation. The Xtalk is a function of the measurement made on the secondary channel (channel 1). It was observed that this unwanted high-frequency energy increases to lessen the measure of the amplitude modulation. In summary, we have demonstrated that introduction of a non-linearity profile takes the periodically modulated PMNL-PFC to strong variations at transmission efficiency, Xtalk, Xratio a function of frequency and modulation amplitude and the input power.

Effect on Intensity Correlation Time by Input Signal in a Single-Mode Laser with Bias Signal Modulation

The effect on intensity correlation time T by input signal is studied for gain-noise model of a single-mode laser driven by colored pump noise and colored quantum noise with colored cross-correlation with a bias signal modulation in this paper. By using the linear approximation method, we detect that there exists maximum (i.e., resonance) in the curve of the intensity correlation time T upon bias-current i0 when the noise correlation coefficient λ is positive; and there exists minimum (i.e., suppression) in the T-i0 curve when λ is negative. And when λ is zero, T increases monotonously with increasing i0. Furthermore, the curve of T upon the signal frequency Ω is also studied. Our study shows that no matter what the value ofλ is, there exists minimum (i.e., suppression) in the T-Ω curve.

Design of Perfect Reconstruction Cosine Modulated Filter Bank with Linear Phase

We propose the quadratic constrained formulas for the design of linear phase cosine modulated paraunitary filter banks given in references . Using these formulae, we can, directly, optimize the prototype filter coefficients in a quadratic form. A design example is also given to demonstrate these formulae in this paper.

Stochastic resonance in a gain-noise model of a single-mode laser driven by pump noise and quantum noise with cross-correlation between real and imaginary parts under direct signal modulation

Stochastic resonance （SR） is studied in a gain-noise model of a single-mode laser driven by a coloured pump noise and a quantum noise with cross-correlation between real and imaginary parts under a direct signal modulation. By using a linear approximation method, we find that the SR appears during the variation of signal-to-noise ratio （SNR） separately with the pump noise self-correlation time τ, the noise correlation coefficient between the real part and the imaginary part of the quantum noise λq, the attenuation coefficient γ＇ and the deterministic steady-state intensity I0. In addition, it is found that the SR can be characterized not only by the dependence of SNR on the noise variables of and λq, but also by the dependence of SNR on the laser system variables of γ and I0. Thus our investigation extends the characteristic quantity of SR proposed before.

A nonlinear Schrodinger equation for gravity waves slowly modulated by linear shear flow

Assume that a fluid is inviscid, incompressible, and irrotational. A nonlinear Schr?dinger equation(NLSE) describing the evolution of gravity waves in finite water depth is derived using the multiple-scale analysis method. The gravity waves are influenced by a linear shear flow, which is composed of a uniform flow and a shear flow with constant vorticity. The modulational instability(MI) of the NLSE is analyzed, and the region of the MI for gravity waves(the necessary condition for existence of freak waves) is identified. In this work, the uniform background flows along or against wave propagation are referred to as down-flow and up-flow, respectively. Uniform up-flow enhances the MI, whereas uniform down-flow reduces it. Positive vorticity enhances the MI, while negative vorticity reduces it. Hence, the influence of positive(negative)vorticity on MI can be balanced out by that of uniform down(up) flow. Furthermore, the Peregrine breather solution of the NLSE is applied to freak waves. Uniform up-flow increases the steepness of the free surface elevation, while uniform down-flow decreases it. Positive vorticity increases the steepness of the free surface elevation, whereas negative vorticity decreases it.

Gravity-capillary waves modulated by linear shear flow in arbitrary water depth

Considering that the fluid is inviscid and incompressible and the flow is irrotational in a fixed frame of reference and using the multiple scale analysis method, we derive a nonlinear Schrodinger equation(NLSE) describing the evolution dynamics of gravity-capillary wavetrains in arbitrary constant depth. The gravity-capillary waves(GCWs) are influenced by a linear shear flow(LSF) which consists of a uniform flow and a shear flow with constant vorticity. The modulational instability(MI) of GCWs with the LSF is analyzed using the NLSE. The MI is effectively modified by the LSF. In infinite depth, there are four asymptotes which are the boundaries between MI and modulational stability(MS) in the instability diagram. In addition, the dimensionless free surface elevation as a function of time for different dimensionless water depth,surface tension, uniform flow and vorticity is exhibited. It is found that the decay of free surface elevation and the steepness of free surface amplitude change over time, which are greatly affected by the water depth, surface tension, uniform flow and vorticity.

RECURSIVENESS OF ZERO STRUCTURES FOR SYSTEM MATRICES OF INTERCONNECTED LINEAR SYSTEMS VIA MODULE THEORETIC TOOLS

The importance of the zeros of multwariable linear systems is well-knoiun in terms of measure obstructions to the controllability and the. observability. In this paper, a recursive decarnposi Am oj interconnected systems is outlined by taking into account the sequential structure of the connnections. The paper extends the, coordinate, module-theoretic studies from the elementary algebraic systems theory to include the case oj such linear interconnected systems which need not to be controllable or observable. Also, the properties of controllability and observability, the decoupling zeros and the signal Making issues are characterized.

A TECHNIQUE FOR MEASURING THE LINEARITY OF A LINEARLY FREQUENCY-MODULATED SIGNAL

A technique for measuring the linearity of a linearly frequency-modulated continuous wave (LFM-CW) signal is presented. It uses a delay-line and a mixer to sense the slope of the output of a sweep oscillator, so that the original form of frequency function deviated from idealized linear slope is retrieved by means of spectrum analysis. Consequently,the linearity of the LFM signal is determined. The formulation is performed based on the principle that an angle-modulated signal can be approximated by an amplitude-modulated signal if the modulation coefficient is sufficiently small. To examine the validity of the procedure and to study the effect of each parameter on the accuracy of measurement, a number of computer simulations has been made. The results of simulation show that the error of the measurement is less than 2%.

Intensity Correlation Function of a Single-Mode Laser Driven by Colored Cross-Correlation Noises in Modulation of a Bias Signal

By using the linear approximation method, the intensity correlation function is calculated for a single-mode laser modulated by a bias signal and driven by colored pump and quantum noises with colored cross-correlation. We found that, when the correlation time between the two noises is very short, the behavior of the intensity correlation function versus the time, in addition to decreasing monotonously, also exhibits several cases, such as one maximum, one minimum, and two extrema. When the correlation time between the two noises is very long, the behavior of the intensity correlation function exhibits oscillation and the envelope is similar to the case of short cross-correlation time.

Linear四输出降压型μModule稳压器LTM4643

Linear推出四输出降压型μModule(微型模块)稳压器LTM4643,该器件可配置为单输出(12A)、双输出(6A和6A或9A和3A)或四输出(每输出3A)稳压器,采用9mm×15mm×1.82mm超薄型LGA封装。这样的灵活性使系统设计师能够依靠一个简单和紧凑的μModule稳压器,以在FPGA、GPU、ASIC和基于微处理器的应用中满足多种电压和负载电流需求。高度为1.82mm的超薄封装使LTM4643能够安装在PCB的背面,为存储器和连接器等组件腾出了正面空间。LTM4643适合高度受限制的系统,例如:PCIe应用中的背面PCB装配。

Development of High-Thrust and Double-Sided Linear Synchronous Motor Module For Liquid Crystal Display Equipment

Recently,there is an increasing requirement for controlling linear motion up to a few hundred of millimeter strokes in the area of the liquid crystal display(LCD) production equipment.The requirements of the motion system for LCD production equipment are high acceleration and high velocity with positioning accuracy.To satisfy these requirements,it has to be designed with the high-thrust force and low velocity ripple.In this work, high-thrust and double-sided linear synchronous motor (LSM)module is proposed and the developed high-thrust and double-sided LSM module is verified by performance test.

Linear SPI μModule隔离器LTM2893/LTM2895

Linear推出SPI(串行外围接口)μModule(微型模块)隔离器LTM2893和LTM2895,这两款器件为凌力尔特广泛的高性能数据转换器系列而优化。LTM2983和LTM2895支持高达100MHz的SPI时钟速率,是现有数字隔离器有效40MHz限制的双倍以上,允许使用更高分辨率和更高速率的数据转换器,同时保持零延迟运行。凭借快速SPI接口。

Error code analysis and selection principle of M-ary modulation in network-based control systems

Error codes induced by M-ary modulation and modulation selection in network-based control systems are studied.It is the first time the issue of error codes induced by M-ary modulation is addressed in control field.In network-based control systems,error codes induced by noisy channel can significantly decrease the quality of control.To solve this problem,the network-based control system with delay and noisy channel is firstly modeled as an asynchronous dynamic system(ADS).Secondly,conditions of packet with error codes(PEC)loss rate by using M-ary modulation are obtained based on dynamic output feedback scheme.Thirdly,more importantly,the selection principle of M-ary modulation is proposed according to the measured signal-to-noise ratio(SNR)and conditions of PEC loss rate.Finally,system stability is analyzed and controller is designed through Lyapunov function and linear matrix inequality(LMI)scheme,and numerical simulations are made to demonstrate the effectiveness of the proposed scheme.

新型多功能厘米波频率合成器设计

该文介绍了一种新型多功能厘米波频率合成器,利用锁相倍频的方式,首次将直接数字频率合成器(DDS)输出的连续波(步进1 MHz)、常规脉冲、重频抖动、重频参差、双脉冲、捷变频信号、组变信号、二相编码和线性调频等信号搬移至0.8~18 GHz频段,外形尺寸为76 mm×70 mm×10 mm,体积约为传统类似频率综合器项目的1/20,具有工作频带宽、频率高、体积小等优点。

基于虚拟电压矢量的双三相直线磁通切换永磁电机容错SVPWM策略

高可靠性是电梯驱动系统的首要指标。针对双三相直线磁通切换永磁(dual-three-phase linear flux switching permanent magnet,DTP-LFSPM)电机单相开路故障,提出一种基于虚拟电压矢量的容错空间矢量脉宽调制策略。首先,基于单相开路故障下的五维变换矩阵计算得到故障后的32个空间电压矢量分布。然后,筛选部分空间电压矢量,以z子空间电压幅值为零且每个扇区产生对称的脉宽调制波形为目标,重构得到12个虚拟电压矢量,相邻的2个虚拟电压矢量都由3个基本电压矢量组成,并用于合成参考电压矢量,不仅可以减少单相开路故障容错控制时的电流谐波,而且具有计算简单,易于硬件实现等优点。最后,搭建DTP-LFSPM电机驱动控制系统仿真与实验平台,仿真和实验测试结果证明所提容错策略的正确性和有效性。