Performance enhancement of a viscoelastic bistable energy harvester using time-delayed feedback control

This paper focuses on the stochastic analysis of a viscoelastic bistable energy harvesting system under colored noise and harmonic excitation, and adopts the time-delayed feedback control to improve its harvesting efficiency. Firstly, to obtain the dimensionless governing equation of the system, the original bistable system is approximated as a system without viscoelastic term by using the stochastic averaging method of energy envelope, and then is further decoupled to derive an equivalent system. The credibility of the proposed method is validated by contrasting the consistency between the numerical and the analytical results of the equivalent system under different noise conditions. The influence of system parameters on average output power is analyzed, and the control effect of the time-delayed feedback control on system performance is compared. The output performance of the system is improved with the occurrence of stochastic resonance(SR). Therefore, the signal-to-noise ratio expression for measuring SR is derived, and the dependence of its SR behavior on different parameters is explored.

A Tutorial on Quantized Feedback Control

In this tutorial paper, we explore the field of quantized feedback control, which has gained significant attention due to the growing prevalence of networked control systems. These systems require the transmission of feedback information, such as measurements and control signals, over digital networks, presenting novel challenges in estimation and control design. Our examination encompasses various topics, including the minimal information needed for effective feedback control, the design of quantizers, strategies for quantized control design and estimation,achieving consensus control with quantized data, and the pursuit of high-precision tracking using quantized measurements.

Fuel recycling feedback control via real-time boron powder injection in EAST with full metal wall

A feedback control of fuel recycling via real-time boron powder injection,addressing the issue of continuously increasing recycling in long-pulse plasma discharges,has been successfully developed and implemented on EAST tokamak.The feedback control system includes four main parts:the impurity powder dropper(IPD),a diagnostic system measuring fuel recycling level represented by D_(α)emission,a plasma control system(PCS)implementing the Proportional Integral Derivative(PID)algorithm,and a signal converter connecting the IPD and PCS.Based on this control system,both active control and feedback control experiments have recently been performed on EAST with a full metal wall.The experimental results show that the fuel recycling can be gradually reduced to lower level as PCS control voltage increases.In the feedback control experiments,it is also observed that the D_(α)emission is reduced to the level below the target D_(α)value by adjusting boron injection flow rate,indicating successful implementation of the fuel recycling feedback control on EAST.This technique provides a new method for fuel recycling control of long pulse and high parameter plasma operations in future fusion devices.

A feedback control method for phase signal demodulation in fber-optic hydrophones

In the realm of acoustic signal detection,the identification of weak signals,particularly in the presence of negative signal-to-noise ratios,poses a significant challenge.This challenge is further heightened when signals are acquired through fiber-optic hydrophones,as these signals often lack physical significance and resist clear systematic modeling.Conventional processing methods,e.g.,low-pass filter(LPF),require a thorough understanding of the effective signal bandwidth for noise reduction,and may introduce undesirable time lags.This paper introduces an innovative feedback control method with dual Kalman filters for the demodulation of phase signals with noises in fiber-optic hydrophones.A mathematical model of the closed-loop system is established to guide the design of the feedback control,aiming to achieve a balance with the input phase signal.The dual Kalman filters are instrumental in mitigating the effects of signal noise,observation noise,and control execution noise,thereby enabling precise estimation for the input phase signals.The effectiveness of this feedback control method is demonstrated through examples,showcasing the restoration of low-noise signals,negative signal-to-noise ratio signals,and multi-frequency signals.This research contributes to the technical advancement of high-performance devices,including fiber-optic hydrophones and phase-locked amplifiers.

A NOTE ON THE GENERAL STABILIZATION OF DISCRETE FEEDBACK CONTROL FOR NON-AUTONOMOUS HYBRID NEUTRAL STOCHASTIC SYSTEMS WITH A DELAY

Discrete feedback control was designed to stabilize an unstable hybrid neutral stochastic differential delay system(HNSDDS) under a highly nonlinear constraint in the H_∞ and exponential forms.Nevertheless,the existing work just adapted to autonomous cases,and the obtained results were mainly on exponential stabilization.In comparison with autonomous cases,non-autonomous systems are of great interest and represent an important challenge.Accordingly,discrete feedback control has here been adjusted with a time factor to stabilize an unstable non-autonomous HNSDDS,in which new Lyapunov-Krasovskii functionals and some novel technologies are adopted.It should be noted,in particular,that the stabilization can be achieved not only in the routine H_∞ and exponential forms,but also the polynomial form and even a general form.

Comparative Study of Trajectory Tracking Control for Automated Vehicles via Model Predictive Control and Robust H-infinity State Feedback Control

A comparative study of model predictive control(MPC)schemes and robust Hstate feedback control(RSC)method for trajectory tracking is proposed in this paper.The main objective of this paper is to compare MPC and RSC controllers’performance in tracking predefined trajectory under different scenarios.MPC controller is designed based on the simple longitudinal-yaw-lateral motions of a single-track vehicle with a linear tire,which is an approximation of the more realistic model of a vehicle with double-track motion with a non-linear tire mode.RSC is designed on the basis of the same method as adopted for the MPC controller to achieve a fair comparison.Then,three test cases are built in CarSim-Simulink joint platform.Specifically,the verification test is used to test the tracking accuracy of MPC and RSC controller under well road conditions.Besides,the double lane change test with low road adhesion is designed to find the maximum velocity that both controllers can carry out while guaranteeing stability.Furthermore,an extreme curve test is built where the road adhesion changes suddenly,in order to test the performance of both controllers under extreme conditions.Finally,the advantages and disadvantages of MPC and RSC under different scenarios are also discussed.

Nonlinear feedback control of a novel hyperchaotic system and its circuit implementation

This paper reports a new hyperchaotic system by adding an additional state variable into a three-dimensional chaotic dynamical system. Some of its basic dynamical properties, such as the hyperchaotic attractor, Lyapunov expo- nents, bifurcation diagram and the hyperchaotic attractor evolving into periodic, quasi-periodic dynamical behaviours by varying parameter k are studied. An effective nonlinear feedback control method is used to suppress hyperchaos to unstable equilibrium. Furthermore, a circuit is designed to realize this new hyperchaotic system by electronic workbench （EWB）. Numerical simulations are presented to show these results.

Delayed feedback control experiments on some flexible structures

In recent decades,studies on delayed system dynamics have attracted increasing attention and advances have been achieved in stability,nonlinearity,delay identification, delay elimination and application.However,most of the existing work is on the theoretical basis and little is on the experiment.This paper presents our experimental studies on delayed feedback control conducted in recent years with the focus on the discussion of a DSP-based delayed experiment system.Some phenomena in our delay experiments are discussed and a few topics of interest for further research are brought forward.

Improved spectrum sharing algorithm based on feedback control information in cognitive radio networks

In order to avoid the system performance deterioration caused by the wireless fading channel and imperfect channel estimation in cognitive radio networks, the spectrum sharing problem with the consideration of feedback control information from the primary user is analyzed. An improved spectrum sharing algorithm based on the combination of the feedback control information and the optimization algorithm is proposed. The relaxation method is used to achieve the approximate spectrum sharing model, and the spectrum sharing strategy that satisfies the individual outage probability constraints can be obtained iteratively with the observed outage probability. Simulation results show that the proposed spectrum sharing algorithm can achieve the spectrum sharing strategy that satisfies the outage probability constraints and reduce the average outage probability without causing maximum transmission rate reduction of the secondary user.

Improved Disturbance Observer (DOB) Based Advanced Feedback Control for Optimal Operation of a Mineral Grinding Process

Advanced feedback control for optimal operation of mineral grinding process is usually based on the model predictive control (MPC) dynamic optimization. Since the MPC does not handle disturbances directly by controller design, it cannot achieve satisfactory effects in controlling complex grinding processes in the presence of strong disturbances and large uncertainties. In this paper, an improved disturbance observer (DOB) based MPC advanced feedback control is proposed to control the multivariable grinding operation. The improved DOB is based on the optimal achievable H 2 performance and can deal with disturbance observation for the nonminimum-phase delay systems. In this DOB-MPC advanced feedback control, the higher-level optimizer computes the optimal operation points by maximize the profit function and passes them to the MPC level. The MPC acts as a presetting controller and is employed to generate proper pre-setpoint for the lower-level basic feedback control system. The DOB acts as a compensator and improves the operation performance by dynamically compensating the setpoints for the basic control system according to the observed various disturbances and plant uncertainties. Several simulations are performed to demonstrate the proposed control method for grinding process operation.

Static output feedback control for discrete-time fuzzy bilinear system

The problem of designing fuzzy static output feedback controller for T-S discrete-time fuzzy bilinear system （DFBS） is presented. Based on parallel distribution compensation method, some sufficient conditions are derived to guarantee the stability of the overall fuzzy system. The stabilization conditions are further formulated into linear matrix inequality （LMI） so that the desired controller can be easily obtained by using the Matlab LMI toolbox. In comparison with the existing results, the drawbacks, such as coordinate transformation, same output matrices, have been elim- inated. Finally, a simulation example shows that the approach is effective.

A survey on delayed feedback control of chaos

This paper introduces the basic idea and provides the mathematical formulation of the delayed feedback control （DFC） methodology, which has been widely used in chaos control. Stability analysis including the well-known odd number linfitation of the DFC is reviewed. Some new developments in characterizing the limitation of the DFC are presented. Various modified DFC methods, which are developed in order to overcome the odd number limitation, are also described. Finally, some open problems in this research field are discussed.

H_∞ Synchronization of Chaotic Systems via Delayed Feedback Control

The H∞ synchronization problem for a class of delayed chaotic systems with external disturbance is investigated. A novel delayed feedback controller is established under which the chaotic master and slave systems are synchronized with a guaranteed H∞ performance. Based on the Lyapunov stability theory, a delay-dependent condition is derived and formulated in the form of linear matrix inequality （LMI）. A numerical simulation is also presented to validate the effectiveness of the developed theoretical results.

An improved car-following model with consideration of the lateral effect and its feedback control research

A car-following model is presented, in which the effects of non-motor vehicles on adjacent lanes are taken into ac- count. A control signal including the velocity differences between the following vehicle and the target vehicle is introduced according to the feedback control theory. The stability condition for the new model is derived. Numerical simulation is used to demonstrate the advantage of the new model including the control signal; the results are consistent with the analytical ones

A new hyperchaotic system and its linear feedback control

This paper reports a new hyperchaotic system by adding an additional state variable into a three-dimensional chaotic dynamical system, studies some of its basic dynamical properties, such as the hyperchaotic attractor, Lyapunov exponents, bifurcation diagram and the hyperchaotic attractor evolving into periodic, quasi-periodic dynamical behaviours by varying parameter k. Furthermore, effective linear feedback control method is used to suppress hyperchaos to unstable equilibrium, periodic orbits and quasi-periodic orbits. Numerical simulations are presented to show these results.

The feedback control of fractional order unified chaotic system

This paper studies the stability of the fractional order unified chaotic system. On the unstable equilibrium points, the equivalent passivity＇＇ method is used to design the nonlinear controller. With the definition of fractional derivatives and integrals, the Lyapunov function is constructed by which it is proved that the controlled fractional order system is stable. With Laplace transform theory, the equivalent integer order state equation from the fractional order nonlinear system is obtained, and the system output can be solved. The simulation results validate the effectiveness of the theory.

STABILIZATION OF VIBRATING BEAM BY VELOCITY FEEDBACK CONTROL

A flexible structure consisting of a Euler-Bernoulli beam with co-located sensors and actuators is considered. The control is a shear force in proportion to velocity. It is known that uniform exponential stability can be achieved with velocity feedback. A sensitivity asymptotic analysis of the system's eigenvalues and eigenfunctions is set up. The authors prove that, for K-1 epsilon (0, + infinity), all of the generalized eigenvectors of A form a Riesz basis of H. It is also proved that the optimal exponential decay rate can be obtained from the spectrum of the system for 0 < K-1 < + infinity.

Adaptive Backstepping Output Feedback Control for SISO Nonlinear System Using Fuzzy Neural Networks

In this paper, a new fuzzy-neural adaptive control approach is developed for a class of single-input and single-output （SISO） nonlinear systems with unmeasured states. Using fuzzy neural networks to approximate the unknown nonlinear functions, a fuzzy- neural adaptive observer is introduced for state estimation as well as system identification. Under the framework of the backstepping design, fuzzy-neural adaptive output feedback control is constructed recursively. It is proven that the proposed fuzzy adaptive control approach guarantees the global boundedness property for all the signals, driving the tracking error to a small neighbordhood of the origin. Simulation example is included to illustrate the effectiveness of the proposed approach.

Robust Output Feedback Control for Fractional Order Nonlinear Systems with Time-varying Delays

Robust controller design problem is investigated for a class of fractional order nonlinear systems with time varying delays. Firstly, a reduced-order observer is designed. Then, an output feedback controller is designed. Both the designed observer and controller are independent of time delays. By choosing appropriate Lyapunov functions, we prove the designed controller can render the fractional order system asymptotically stable. A simulation example is given to verify the effectiveness of the proposed approach. © 2014 Chinese Association of Automation.

Adaptive robust feedback control of moving target tracking for all-Electrical tank with uncertainty

A moving target tracking control problem for marching tank based on adaptive robust feedback control scheme is addressed.A series of preparations is needed for tank gun before shooting a target,the purpose of this paper is to design a control system to fulfill two requirements in this process:the turretbarrel system of tank needs to be adjusted from off-target position to command position and point to the moving target stably when there are strong uncertainties(modeling error,uncertain disturbance with unknown boundaries and road excitation) in the system.Considering the characteristic of coupled interaction,the first thing we do in this paper is to build a coupled analysis model of turret-barrel system with uncertainty term in state-space form.Second,an adaptive robust feedback control scheme is proposed by adding adaptive law to overcome the uncertainty.Third,multi-body dynamics software is used to establish the mechanical mechanism of the tank,and DC-motor module is established in SIMULINK environment,thus the target information and tracking error of the control system is collected and transferred,the gear-ball screw is derived directly by the output torque of the DC-motor module.Finally,the control system and the 3D model are combined together by means of Recur Dyn/SIMULINK co-simulation,the turret-barrel system of tank can approximately track the moving target in a certain range.With the adaptive robust feedback control,the target action is completely followed when the target location is constantly changing.