Effect of the feeding rate on microstructure and properties of plasma spheroidized GH4169 powder

The growing interest in additive manufacturing of GH4169 alloy was accompanied by the demand on spherical GH4169 powders with high performance.The powder particles were treated by radio frequency plasma with the different feeding rates.The microstructure and morphology,the particle size distribution of as-treated powders were studied by scanning electron microscopy and laser particle size analysis.It was demonstrated that GH4169 powders with extremely fine followability were obtained by radio frequency plasma spheroidization technology.With the same plasma parameters,the spheroidization efficiency of the particles varied with the feeding rates.When the rate of the powder feeding rates was too small,the excessive absorption of the heating by the powders caused vaporization,then the collection decreased.When the feeding rates was too large,the powder particles were insufficiently absorbed,resulting in defects in the powders.The microstructure of the as-treated spherical particles was mainly cell crystals,columnar crystals,and even microcrystals.Under the suitable plasma parameters,the resulting powders haved a slightly increased average particle size,excellent spheroidization,surface smoothness,followability,and bulk ratio.

Suitable Temperature, Stocking Density and Feeding Rate for Optimal Growth of Sex Reversed Fry of Nile Tilapia Oreochromis niloticus (Senegal River Strain)

Determining the suitable fish farming conditions for optimal growth is necessary for aquaculture production, but it is not very obvious because it requires a good understanding of species biology. Thus, this study aims to evaluate the effects of different temperature regimes, stocking densities, and feeding rates on the growth of Nile tilapia, Oreochromis niloticus fingerlings that have been sex-reversed with 17α methyl testosterone. Three independent experiments were performed (with replicates) at the IRD Bel-Air fish farm (Dakar, Senegal) on 27-day-old fry maintained in six 25 L tanks with a batch of 100 individuals each. These fry were subjected to three different temperatures (26˚C, 28˚C, 30˚C;kept constant with thermostats), stocking densities (5, 10 and 15 ind/l) and feeding rates (5%, 10% and 15% of biomass;distributed three times a day). For the temperature and density treatments, fry was fed a pelleted feed containing 38% protein, distributed by hand at 10% of their total biomass, readjusted after each measurement. Growth performance (total weight, weight gain and daily weight gain), physicochemical parameters (temperature, oxygen, nitrite and phosphorus), feed conversion ratio (FCR) and survival rate (SR) were regularly monitored (weekly) during the experimental period. For the heat treatment, the results did not show an apparent relationship between growth performance and nitrite, phosphorus or dissolved oxygen (DO) contents. In contrast, there was a significant correlation between temperature and growth rates, with the best growth being obtained at 30˚C compared to 28˚C and 26˚C. Similarly, growth rates were correlated with stocking density and feeding rate but not with oxygen, temperature, nitrite or phosphorus levels. The best growth rates were observed at the lowest density (5 ind/l) and for the highest feeding rate (15% of biomass), which coincides with the best FCR and survival rates. Thus, 30˚C, 5 ind/l and 15% of biomass appeared to be the most favorable temperature, stocking density and feeding rate for optimal growth of Nile tilapia fry after inversion. The application of these results in the culture systems will allow to reach a good production of O. niloticus and thus to contribute to sustainable development of fish culture in Senegal.

Design and modelling of the full-feed peanut picking device with selfadaptive adjustable working clearance and feeding rate

To improve the declining performance of a full-feed peanut picking device or solve the mechanical failures that occur due to fluctuations in the feeding rate during operation,the 4HLJI-3000 peanut intelligent picking combine harvester,which is a picking device with a self-adaptive adjustment of the working clearance,was developed as the research object in this study.Moreover,the key components,such as the picking roller,concave plate sieve and clearance adjustment mechanism of the concave plate sieve,were designed and analysed.Through the force analysis of the concave plate sieve of the picking device,the mathematical model of the concave plate sieve displacement of the picking device and feeding rate was obtained.The software system for monitoring,storing and analysing the concave plate sieve displacement of the picking device based on EasyBuilder Pro was designed,and the road monitoring test of displacement variation of concave plate sieve of the picking device and feeding rate was carried out.The linear function,power function,exponential function,quadratic function,compound function,logarithmic function and cubic function fitting were used to perform regression analysis of the test results by using IBM SPSS software.The results showed that the cubic function model had a higher fitting precision,and its determination coefficient was 0.992.Model verification experiments were proposed,and the results showed that the established cubic function model had a good accuracy.The absolute deviation rate ranged from 0 to 4.83%,and the average deviation rate was 2.22%.The deviation rate increased with an increasing feeding rate.The field experiments also proved that there was a cubic function relationship between the feeding rate and concave plate sieve displacement,the measured concave plate sieve displacement deviation rate ranged from 0 to 6.19%,and the average deviation rate was 2.73%compared with the calculated results.This study can provide a reference for the optimization design of the structure of full-feeding picking devices for peanuts and other crops and the intelligent measurement and control of the feeding rates.

Effects of feeding rate and formula fineness degree of ring die pellet mill on mechanical property, physical quality, energy requirements, and production cost of poultry diets

The effect of a machine feeding rate(FR;1,1.5 and 2 Mg/h)and/or three levels of selected fineness degree(FD;3,5 and 7 mm)on machine performance,pellet physical parameters,required energy and production cost of three main types of broilers diets were examined in this experiment.The examined broiler diets were formulated to meet the Ross 308 strain requirements.A complete factorial design(3×3×3)was used to identify the effects of studied factors on the pellet mill machine and pellet production.The obtained results indicated that the pellet mill productivity significantly(p˂0.001)improved through increased pellet mill feeding rate level.In addition,the machine pelleting efficiency was found to be significantly affected by all studied variables and their interactions.While the total power consumption of the machine showed no variations under the impact of the tested factors or with any of their combinations.Regarding the pellet physical quality indices,all broiler diets with all selected FD and lower FR had the maximum durability and bulk density levels.Furthermore,lower feeding rates were associated with higher hardness degrees.The lowest production costs were substantially correlated with high FR and intermediate FD(5 mm).Furthermore,production costs were determined to be reduced in finisher broiler diets under different feeding rates.Moreover,manufacturing costs of finisher broiler meals were observed to decrease in several feeding rates.Overall,these findings indicate the capabilities of producing high-quality pellets and reducing the needed production costs by optimizing feeding rates to 2 Mg/h and 2 mm fineness in broiler diets.

Development of growth rate, body lipid,moisture,and energy models for white sturgeon (Acipenser transmontanus) fed at various feeding rates

The objectives were to develop and evaluate: 1) growth rate models, 2) body lipid, moisture, and energy models for white sturgeon fed at various feeding rates(FR; % body weight [BW] per day) and then evaluate responses at proportions of optimum feeding rate(OFR) across increasing BW(g). For objective1,19 datasets from the literature containing initial BW, FR and specific growth rate(SGR; % BW increase per day) were used. For objective 2.12 datasets from the literature(11 from objective 1) containing SGR,FR,final BW,body lipid(%),protein(%),ash(%),moisture(%),and energy(kJ/g) were used. The average rearing temperatures was 19.2 ± 1.5 ℃(mean ± SD). The average nutrient compositions and gross energy of the diets were 45.7 ± 4.3% protein,14.8 ± 3.2% lipid, and 20.4 ± 1.3 kJ/g,respectively. The logistic model was used for objectives 1 and 2 to develop a statistical relationship between SGR and FR, then an iterative technique was used to estimate OFR for each dataset. For objective 2, the statistical relationship between body lipid, energy, and moisture and FR was established. Using the OFR estimate, SGR, body lipid, energy and moisture were computed at various FR as a proportion of OFR, Finally, a nonparametric fitting procedure was used to establish relationships between SGR, body lipid, energy and moisture(responses)compared with BW(predictor) at various proportions of OFR. This allows visualization of the effect of under-or over-feeding on the various responses. When examining the differences between OFR at 100%and various proportions of OFR, SGR differences decrease and moisture differences increase as BW increases. Lipid and energy differences decrease as BW increases. To our knowledge, these are the first description of changes in nutrient compositions when white sturgeon are fed at various FR. Because physiological and behavioral properties that are unique to sturgeon, results from this study are specific to sturgeon under the conditions of this study and cannot be compared directly with salmonids even if some of the results are similar. This research provides insight to designing future nutritional studies in sturgeon.

Effects of Different Feeding Patterns on the Growth of Micropterus salmoides

Three experimental groups with different feeding frequencies,different feeding rates and compensatory feeding were set up to study their effects on the growth of Micropterus salmoides.The results showed that different feeding rates of 2%,3%and 4%had no significant effects on the growth of M.salmoides.Therefore,before the individual weight of 50 g,the fish could be fed with a feeding rate of 4%,which could be gradually decreased to 2%in the later period.Under the condition of relatively fixed feeding rate,different feeding frequencies had an impact on the growth of M.salmoides.Under the conditions of suitable water temperature,it is reasonable to feed twice daily.The experimental fish fed for 5 d and then deprived of feed for 1 d showed fully compensatory growth,and there were no significant differences in weight gain rate,daily weight gain and specific growth rate compared with the continuous feeding group(P>0.05).Therefore,according to the feeding conditions of fish in the breeding process,stopping feeding for 1 d every 5 d could save feed and labor and improve breeding efficiency.

The Impact of Rate of Feeding Advancement after Early Initiation of Enteral Nutrition in Critically Ill, Underweight Patients: A Single-Center Retrospective Chart Review

Background: The optimal rate of feeding advancement after initiation of early enteral nutrition (EEN) for underweight, critically ill patients is unknown. Methods: We conducted a retrospective chart review in intensive care unit (ICU) patients with a body mass index (BMI) < 20.0 kg/m2. Patients were categorized into Group R, which reached the energy target within 3 days of EEN initiation, and Group S, which reached the energy target 4 or more days after EEN initiation. Results: A total of 65 patients with a median age of 73 years were included in the study. No significant differences were observed between the two groups for all-cause mortality, ICU-free days, or length of hospital stay. Ventilator-free days (VFDs) were significantly fewer in Group R than in Group S (18.0 [0.0 - 22.0] vs. 21.0 [16.3 - 24.8] days;P = 0.046). A significantly higher number of patients requiring mechanical ventilation (MV) at hospital discharge were observed in Group R than in Group S (29% vs. 8%;P = 0.030). Multivariable analyses with adjustment for confounders found that days required to reach target energy intake after EEN initiation were significantly and independently associated with the requirement for MV at hospital discharge, but not with VFDs. Conclusion: A slow rate of feeding advancement after initiation of EEN in critically ill patients having a BMI of <20.0 kg/m2 might be associated with a reduced requirement for MV at hospital discharge. These results require confirmation in a large multicenter trial of underweight, critically ill patients.

Inter-individual variation in provisioning rate,prey size and number,and links to total prey biomass delivered to nestlings in the Collared Flycatcher(Ficedula albicollis)

Background:In bird species where offspring growth and survival rely on parents’food provisioning,parents can maximise their fitness by increasing the quantity and/or the quality of preys delivered to their offspring.Many studies have focused on inter-individual variation in feeding rate,yet this measure may not accurately reflect the total amount of food(i.e.energy)provided by parents if there is large variation in the quantity and quality of preys at each feeding.Here,we explored the relative role of individual(sex,age,body condition),breeding(hatching date,brood size)and environmental(temperature)factors on feeding rate,prey number,size and quality,and their contribution to total prey biomass delivered to the nestlings of 164 Collared Flycatcher(Ficedula albicollis)parents in 98 nests.Results:Preys delivered to the nest were mainly larvae(53.6%)and flying insects(45.6%).Feeding rate increased with brood size and age,and was higher in males than females.Mean prey number decreased,but mean prey size increased,as the season progressed and parents feeding their brood with primary larvae brought more preys per visit.Relationships between feeding rate,mean prey number and size remained when taking into account the provision-ing quality:parents brought either a large number of small prey or a small number of larger items,and the force of the trade-offs between feeding rate and mean prey number and size depended on the quality of the provisioning of the parents.Whatever the percentage of larvae among preys in the provisioning,the variance in total prey biomass was foremost explained by feeding rate(65.1%to 76.6%)compared to mean prey number(16.4%to 26%)and prey size(2.7%to 4%).Conclusions:Our study shows that variation in feeding rate,prey number,size,but not quality(i.e.percentage of lar-vae),were influenced by individual factors(sex and age)and breeding decisions(brood size and timing of breeding)and that,whatever the provisioning strategy adopted,feeding rate was the best proxy of the total biomass delivered to the nestlings.

Effect of Water Temperature on Feeding Rhythm in Common Carp (Cyprinus carpio haematopterus Temminck et Schlegel)

Feeding rhythm of common carp was investigated from 4℃ to 34℃. The results indicated that there was a diel feeding rhythm for both adult （630-850 g） and youth （61-91 g） at all tested temperatures. There were two main activity peaks at 8：00-11：00 a.m. and 19：00-23：00 p.m., during which feeding quantities were 10.68%-32.53% and 16.25%-33.41% of the daily intake, respectively. When water temperature dropped to below 10℃, the feeding peak concentrated at 8：00-11：00 a.m. and 19：00 p.m. to 4：00 a.m. At 6℃, though both adult and youth would still feed, the feeding quantities were only 0.01% and 0.35% of body mass. Daily feeding rate of adult and youth reached 1.21% and 2.63% at 14℃, respectively. Both adult and youth carps reached the maximum daily feeding rate at 28℃, being 2.84% and 12.06% of body mass, respectively. The daily feeding rate of adult and youth reduced suddenly after at 34℃, and the daily feeding rate was only 0.74% and 9.45% of body mass, respectively. There was significant difference in daily feeding rate at different water temperatures （P〈0.05）.

OPTIMAL FEED RATE CONTROL FOR MULTI-AXIS CNC MACHINING OF FREE FORM SURFACES

Considering machining efficiency, surface quality and wear of cutter and machine, it is necessary to maintain high, stable and constant surface feed rate as far as possible.The feed late control strategy for multi-axis CNC machining of free-form surfaces is presented. It comprises: ①the determination of effective feed rate; ②the adoption of suitable approaches to smooth feed rate. This strategy considers path geometry, actuator limitation and machine dynamics. The result shows that machining efficiency is improved effectively.

Effect of Sudden Increase of Solid Feed Rate on the Arching in Hoppers Connected to a Moving-Bed Standpipe with Interstitial Gas Flow

In this paper, a model is proposed for the prediction of the width of arching in hoppers resulted from sudden changes in solid feed rates. Such changes in solid feed rate usually come from the collision on the surface of the moving-bed in the standpipe. The model also takes into account the effect of the powder height in the standpipe of the hopper. The model proves to be adaptable for predicting operational conditions to avoid arching by keeping constant powder height in the main standpipe with interstitial gas flow.

Effect of Low Feed Rate FSP on Microstructure and Mechanical Properties of Extruded Cast 2285 Aluminum Alloy

Friction stir processing （FSP）, a variation of FSW （friction stir welding） is an emerging surface engineering technology that can locally eliminate casting defects and refine microstructures, thereby improving the mechanical properties of material. FSP can also produce fine grained microstructures through the thickness to impart superplasticity. The technology involves plunging a rapidly rotating, non consumable tool, comprising a profiled pin and larger diameter shoulder, into the surface and then traversing the tool across the surface. The pin and the shoulder friction heat the surface which alters the grain structure in the processed area thereby improving the mechanical properties. This paper presents the effects of FSP on microstructure and mechanical properties of extruded cast 2285 aluminum alloy at three different feed rates viz. 10, 12 and 15 mm/min. With the increase in the feed speed the material was observed to have increased impact strength. FSP also increased the tensile and yield strengths with increases in hardness and ductility values also. The observation has been listed in detail and pictorially represented.

Preliminary Study on Feeding Habits of Anthocidaris crassispina

Abstract Employing experimental-ecological methods, the feeding and vitality of adult Anthocidaris crassispina were investigated. The results showed that A. cras- sispina exhibited an obvious preference on five different seaweeds, with the preference order of Betaphycus gelatinum 〉 Sargassum hemiphyllum 〉 Gelidium amansii 〉 Ulva lactuca 〉 Codium fragile. The daily feed intake of A. crassispina differed among U. lactuca, S. hemiphyllum and B. gelatinum. The feeding was affected by water temperature, seaweed species and body weight. The optimal vitality and feed intake were observed under 23 -27℃, which were inhibited under whether too higher or too lower temperature. Under the optimal temperature for feeding, the daily feed intake of adult A. crassispina assumed an exponentially-decreasing trend with increase of body weight.

Study on Growth and Development of Early Postembryonic Stage of Onychostoma sima

[Objective] The paper was to study the growth and development of Onychostoma sima in postembryonic development stage. [Method] The oosperm was obtained by artificial spawning and artificial insemination method, and hatched under laboratory condition. The indexes such as body weight, body length, length in front of anus and body height were measured to establish larvae growth model. [Result] When the water temperature was （20±1.5） ℃, the body length and body weight of newly hatched larvae were （10.28±0.05） mm and （7.79±0.08） mg, respectively. O. sima larvae begin to feed on the 4 th day after hatching, the initial feeding rate was 48%, the highest feeding rate was 100% on the 6 th d. The-point-of-no-return （PNR） was 13.5 d. In addition, it was also observed that the appearance time of PNR point of O. sima larvae was close to death time of completely starved group, being only 2 d, indicating that once O. sima larvae reached the PNR point, they would face death threats within short time. Therefore, various growth conditions for O. sima larvae should be satisfied to ensure full development of all organs, thereby reducing death and growth stagnation caused by adverse environment in early postembryonic stage. [Conclusion] The study provided theoretical basis for solving the problems in artificial breeding.

ZrO2/PMMA Nanocomposites： Preparation and Its Dispersion in Polymer Matrix

ZrO2/PMMA nanocomposite particles are synthesized through an in-situ free radical emulsion polymerization based on the silane coupling agent （Z-6030） modified ZrO2 nanoparticles, and the morphology, size and its distribution of nanocomposite particles are investigated. Scanning electron microscopy （SEM） images demonstrate that the methyl methacrylate （MMA） feeding rate has a significant effect on the particle size and morphology. When the MMA feeding rate decreases from 0.42 ml-min-1 to 0.08 ml. min-1, large particles （about 200-550.nm） will not form, and the size distribution become narrow （36-54 nm）. The average nanocomposite particles size increases from 34 nm to 55 nm, as the MMA/ZrO2 nanoparticles mass ratio increased from 4 ： 1 to 16 ： 1. Regular spherical ZrO2/PMMA nanocomposite particles are synthesized when the emulsifier OP-10 concentration is 2 mg.m1-1. The nanocomposite particles could be mixed with VAc-VeoVa10 polymer matrix just by magnetic stirring to prepare the ZrOE/PMMA/VAc-VeoVal0 hybrid coatings. SEM and atomic force microscopy （AFM） photos reveal that the distribution of the ZrO2/PMMA nanocomposite particles in the VAc-VeoVal0 polymer matrix is homogenous and stable. Here, the grafted-PMMA polymer on ZrO2 nanoparticles plays as a bridge which effectively connects the ZrO2 nanoparticles and the VAc-VeoVal0 polymer matrix with improved comparability. In consequence, the hybrid coating with good dispersion stability is obtained.

Early development and the point of no return in pikeperch( Sander lucioperca L.) larvae

The objectives of the present study were to evaluate the yolk-sac and oil globule absorption and point of no return （PNR） ofpikeperch （Sander lucioperca L.） larvae. Artificial propagation ofpikeperch was performed at （15±2）℃. Yolk-sac absorption, oil globule absorption, larval growth and the first initial feeding rate were observed to analyze the early growth and to determine the PNR of pikeperch larvae. The total length of newly hatched （0 day after hatching, DAH） pikeperch larvae was （4.25±0.22） mm and the volume of the yolk-sac and the oil globule was （0.30±0.12）mm^3 and （5.14±2.28） 10-2 mm^3 respectively. The yolk-sac and the oil globule were exhausted at 11 DAH and 14 DAH, respectively. Pikeperch larvae began feeding at 8 DAH with an initial feeding rate about 10.0%. From 9 to 14 DAH, the initial feeding rate increased rapidly, and reached its highest （about 82.7%） at 14 DAH. It declined thereafter, 48.9% at 15 DAH and 35.6% at 16 DAH, thus the pikeperch larvae reached PNR by 15-16 DAH. The appropriate first feeding time for the pikeperch larvae is 11-12 DAH, when the initial feeding rate is higher than half of the maximum initial feeding rate.

Analysis of metal transfer during electron beam welding with filler wire

The metal transfer mode of electron beam welding （EBW） with filler wire was studied experimentally. The spatial position between the electron beam and the filler wire was defined. Basing on the charge coupled device （CCD） visual sensing system, the metal transfer mode of filler wire was investigated. The results showed that there were five transfer modes during EBW process due to different wire feed rates and spatial positions between beam and filler wire, such as short-circuiting mode, molten metal bridge mode, small droplet mode, big droplet mode and mixed mode. By comparing the weld appearance of different transfer modes, the molten metal bridge transfer was proved to be the best transfer mode.

Prediction of preheating conditions for inclined laser assisted machining

For laser assisted machining,shape of preheating laser heat source is changed irregularly because of complexity of material shape.So,the preheating temperature should be controlled by adjusting the feed rate or the laser power.Thermal analyses of the laser assisted machining process for inclination planes were performed.By analyzing the obtained temperature profile,a proper feed rate control method was proposed according to the inclination angles.In addition,the temperature distribution of the cross section after feed rate control was predicted.The correlation equation between inclination angles and adjusted proper feed rate was proposed.The results of this analysis can be used to predict the preheating effect on workpiece and can be applied as a preheating temperature control method in laser assisted machining processes.

THE INFLUENCE OF SCREEN PARAMETERS ON PERFORMANCE CHARACTERISTICS

A series of laboratory screening tests have been performed with the objective of evaluating the effect of feed rate, screen length and screen motion on the quality of separation. The separation performance has been evaluated by the use of proposed ISO Standard measures which are based on the partition curve.The laboratory rig, the test programme and results derived from it are discussed. The effect of screen length, feed rate and screen motion on the levels of screen performance as indicated by these measures and a normalised separation size parameter are discussed in relation to the assumed screening conditions for the tests reported and conclusions are summarised.

Self-Adaptive Control System for Additive Manufacturing Using Double Electrode Micro Plasma Arc Welding

Wire arc additive manufacturing(WAAM)has been investigated to deposit large-scale metal parts due to its high deposition efficiency and low material cost.However,in the process of automatically manufacturing the high-quality metal parts by WAAM,several problems about the heat build-up,the deposit-path optimization,and the stability of the process parameters need to be well addressed.To overcome these issues,a new WAAM method based on the double electrode micro plasma arc welding(DE-MPAW)was designed.The circuit principles of different metal-transfer models in the DE-MPAW deposition process were analyzed theoretically.The effects between the parameters,wire feed rate and torch stand-off distance,in the process of WAAM were investigated experimentally.In addition,a real-time DE-MPAW control system was developed to optimize and stabilize the deposition process by self-adaptively changing the wire feed rate and torch stand-off distance.Finally,a series of tests were performed to evaluate the control system’s performance.The results show that the capability against interferences in the process of WAAM has been enhanced by this self-adaptive adjustment system.Further,the deposition paths about the metal part’s layer heights in WAAM are simplified.Finally,the appearance of the WAAM-deposited metal layers is also improved with the use of the control system.