Petrological Implication of the Albite Rims in the Felsic Gneisses of the Fuping Complex

The albite rim is present in most felsic gneisses of the Fuping Complex. The presence of the rim indicates the coexistence of plagioclase and K-feldspar in the rock. The rim is formed immediately after the myrmekite, and both textures were derived from the alteration of K-feldspar. The difference is that that there is no quartz present in the rim, and the rim is nearly albite and the anorthite content of the rim plagioclase is substantially lower than that of the myrmekite plagioclase. Formed at 400- 500~C the albite rim was derived from the K-feldspar composition adjustment in the late or post- magmatism stage. As the temperature decreased, the equilibrium between K-feldspar and plagioclase could be maintained, and reactions between the minerals occurred. The leucocratic veins in the complex show distinguished magma or migmatitic characteristics. The rim might form in the late magma or deuteric stage. The formation of the rim implies obvious granitic magmaor melt-injection activity. Typical metamorphic rocks cannot produce the rims. Anatexis after medium-high grade metamorphism might be subordinate. If present, the anatexis is water-present, but the rim texture cannot be taken as the symbol of anatexis.

新疆冰草沟地区构造角砾岩与铀成矿关系探讨

新疆冰草沟地区经历了二叠纪早期裂谷拉张到晚期萎缩的过程,形成了大量层状中基性火山岩,并沿层间构造破碎带发育大量铀矿化。文章通过对冰草沟地区构造角砾岩岩相学、地球化学等特征的研究,结合其与铀矿体的空间关系,分析岩浆及成矿流体源区特征,探讨构造角砾岩与铀成矿关系。研究结果表明,冰草沟地区构造角砾岩为玄武安山岩破碎后被晚期长英质熔体充填胶结,胶结物具有深部长英质向浅部方解石变化特征,向浅部突变的界面是定位铀矿体的重要构造标志。构造角砾岩和玄武安山岩稀土、微量元素特征显示均具有富集地幔和不同程度地壳混染的一致性特征,晚期长英质熔体具有较高的氧逸度,更加有利于磷、铀的活化和迁移。矿石中Nb/Ta、Cl/F值显示成矿流体基本无地幔岩浆参与,为长英质熔体中出溶的富钠碱性热液,是顺层构造及后期地壳部分重熔热事件活动的产物。

韧性剪切带的变形变质与同构造熔融作用——以中祁连地块宝库河韧性走滑剪切带为例

宝库河韧性剪切带是发育在中祁连地块北缘上的一条向北陡倾,走向近东西,宽约6km的右行平移型韧性剪切带。剪切带内岩石原岩为泥质岩、基性岩和花岗岩,变质程度达角闪岩相,变形变质温度在685～763±46C之间,压力在0.62～0.83±0.13 GPa范围内。其内长英质条带非常发育,规模变化较大,分布局部相对集中且受剪切带控制,走向与剪切带一致,平行于叶理,孤立无根,并在后期递进变形过程中发生不同程度的糜棱岩化、布丁化和褶皱,主要成分为长石和石英,明显不同于韧性剪切前或后侵入的花岗岩脉或岩体。长英质条带特征、REE配分模式及剪切带内岩石的变形变质温度说明剪切带内发育的长英质条带与基体是同源的,是在剪切应变过程中剪切热使围岩内部分物质发生动态熔融形成的,是同构造熔融作用的产物。

柴北缘大陆深俯冲板片折返过程中的深熔作用研究

柴北缘锡铁山地区长英质（花岗）片麻岩普遍经历了不同程度的部分熔融作用,常见新生的花岗质浅色体呈层状、脉状或网络状分布于长英质片麻岩中,并显示出混合岩化的特征。岩相学观察结果显示长英质片麻岩保留了关键的深熔作用显微结构证据：（1）石榴石内部发育有钾长石、石英和斜长石组成的矿物包裹体;（2）长石颗粒边界出现由石英＋钾长石±斜长石±白云母组成的楔形矿物集合体;（3）云母颗粒边界发育尖锐的、不规则的微斜长石,而且云母边界溶蚀明显,形成锯齿状不规则的边界;（4）石英、斜长石或钾长石颗粒边界发育圆珠状（string of beads）结构,而且颗粒边界或三联点中尖锐状微斜长石与周围矿物的形成较小的二面角。阴极发光图像和锆石U-Pb定年结果表明花岗质浅色体中的锆石具有明显的核、幔、边三层结构,而且具有明显不同的年龄结果。发光较强的继承性锆石岩浆核部的206Pb/238U年龄约为～910Ma,而且具有高的Th/U比值;弱发光的变质锆石幔的206Pb/238U年龄结果约为～450Ma。新生的锆石增生边中等程度发光,并发育震荡环带和较低的Th/U比值,与世界典型地区混合岩中深熔锆石的特征十分相似,其206Pb/238U年龄结果为432±3Ma。野外关系、显微结构特征和年代学的研究结果显示柴北缘锡铁山地区花岗质浅色体可能是其寄主岩石长英质片麻岩在折返到高压麻粒岩相条件下深熔作用的产物,而且白云母的脱水熔融是引发岩石发生深熔作用的主要机制。柴北缘地区已有的资料综合研究表明,大陆深俯冲板片在俯冲/碰撞和折返过程中可能经历了多重深熔作用。

Recycled oceanic crust as a source for tonalite intrusions in the mantle section of the Khor Fakkan block, Semail ophiolite(UAE)

Several types of felsic granitoid rocks have been recognized, intrusive in both the mantle and the crustal sequence of the Semail ophiolite. Several models have been proposed for the source of this suite of tonalites, granodiorites, trondhjemites intrusions, however their genesis is still not clearly understood.The sampled Dadnah tonalites that intruded in the mantle section of the Semail ophiolite display arctype geochemical characteristics, are high siliceous, low-potassic, metaluminous to weakly peraluminous, enriched in LILE, show positive peaks for Ba, Pb, Eu, negative troughs for U, Ti and occur with low δ^(18)O_(H_2 O), moderate ε_(Sr) and negative eNd values. They have crystallized at temperatures that range from～550 ℃ to ～720 ℃ and pressure ranging from 4.4 kbar to 6.5 kbar. The isotopic ages from our tonalite samples range between 98.6 Ma and 94.9 Ma, slightly older and overlapping with the age of the metamorphic sole. Our field observations, mineralogical, petrological, geochemical, isotopic and melt inclusion data suggest that the Dadnah tonalites formed by partial melting(～10%-15% continuous or ～12% batch partial melting), accumulation of plagioclase, fractional crystallization(～55%-57%), and interaction with their host harzburgites. These tonalites were the end result of partial melting and subsequent contamination and mixing of ～4% oceanic sediments with ～96% oceanic lithosphere from the subducted slab. This MORB-type slab melt composed from ～97% recycled oceanic crust and ～3% of the overlying mantle.We suggest that a possible protolith for these tonalites was the basaltic lavas from the subducted oceanic slab that melted during the initial stages of the supra-subduction zone(SSZ), which was forming synchronously to the spreading ridge axis. The tonalite melts mildly modified due to low degree of mixing and interaction with the overlying lithospheric mantle. Subsequently, the Dadnah tonalites emplaced at the upper part of the mantle sequence of the Semail ophiolite and are geochemically distinct from the other mantle intrusive felsic granitoids to the south.

Partial melting of deeply subducted continental crust and the formation of quartzofeldspathic polyphase inclusions in the Sulu UHP eclogites

Two types of quartzofeldspathic inclusions hosted by omphacite and garnet were identified in the Sulu UHP eclogites. The first consists of albite, quartz, and various amounts of K-feldspar. In contrast, the second consists predominantly of K-feldspar and quartz without any albite. The presence of quart-zofeldspathic inclusions within the UHP mafic eclogites indicates that partial melting occurred in deeply subducted continental crust via mica dehydration melting reactions at an early stage of rapid exhumation. Such a melting event generated hydrous Na-K-Al-Si melts. These melts infiltrated into the mafic eclogite and were captured by recrystallizing garnet or omphacite, which together followed by dehydration and crystallization to form feldspar-bearing polyphase inclusions. Formation of silicate melts within the deeply subducted continental slab not only provides an excellent medium to transport both mobile (LILE) and immobile (HFSE) elements over a large distance, but also induces effective changes in the physical properties of the UHP slab. This process could be a major factor that enhances rapid exhumation of a deeply subducted continental slab.