Photoionization of NaK molecule with a double-well potential in femtosecond pump-probe pulse laser fields

The method of time-dependent quantum wave packet dynamics is used to calculate the femtosecond pump-probe photoelectron spectra and study the wave packet dynamic processes of the double-minimum potential state 6^1∑^＋ of NaK in intense laser fields. The evolutions of the wave packet and the photoelectron energy spectra with time and internuclear distance are described in detail. The wave packet dynamic information of the 6^1∑^＋ state can be extracted from the photoelectron energy spectra.

Triboelectric‘electrostatic tweezers'for manipulating droplets on lubricated slippery surfaces prepared by femtosecond laser processing

The use of‘Electrostatic tweezers'is a promising tool for droplet manipulation,but it faces many limitations in manipulating droplets on superhydrophobic surfaces.Here,we achieve noncontact and multifunctional droplet manipulation on Nepenthes-inspired lubricated slippery surfaces via triboelectric electrostatic tweezers(TETs).The TET manipulation of droplets on a slippery surface has many advantages over electrostatic droplet manipulation on a superhydrophobic surface.The electrostatic field induces the redistribution of the charges inside the neutral droplet,which causes the triboelectric charged rod to drive the droplet to move forward under the electrostatic force.Positively or negatively charged droplets can also be driven by TET based on electrostatic attraction and repulsion.TET enables us to manipulate droplets under diverse conditions,including anti-gravity climb,suspended droplets,corrosive liquids,low-surface-tension liquids(e.g.ethanol with a surface tension of 22.3 mN·m^(-1)),different droplet volumes(from 100 nl to 0.5 ml),passing through narrow slits,sliding over damaged areas,on various solid substrates,and even droplets in an enclosed system.Various droplet-related applications,such as motion guidance,motion switching,droplet-based microreactions,surface cleaning,surface defogging,liquid sorting,and cell labeling,can be easily achieved with TETs.

High-performance liquid metal electromagnetic actuator fabricated by femtosecond laser

Small-scale electromagnetic soft actuators are characterized by a fast response and simplecontrol,holding prospects in the field of soft and miniaturized robotics.The use of liquid metal(LM)to replace a rigid conductor inside soft actuators can reduce the rigidity and enhance the actuation performance and robustness.Despite research efforts,challenges persist in the flexible fabrication of LM soft actuators and in the improvement of actuation performance.To address these challenges,we developed a fast and robust electromagnetic soft microplate actuator based on a laser-induced selective adhesion transfer method.Equipped with unprecedentedly thin LM circuit and customized low Young’s modulus silicone rubber(1.03 kPa),our actuator exhibits an excellent deformation angle(265.25?)and actuation bending angular velocity(284.66 rad·s^(-1)).Furthermore,multiple actuators have been combined to build an artificial gripper with a wide range of functionalities.Our actuator presents new possibilities for designing small-scaleartificial machines and supports advancements in ultrafast soft and miniaturized robotics.

Femtosecond laser fabrication of 3D vertically aligned micro-pore network on thick-film Li_(4)Ti_(5)O_(12)electrode for high-performance lithium storage

The development of energy storage devices with high energy density relies heavily on thick film electrodes,but it is challenging due to the limited ion transport kinetics inherent in thick electrodes.Here,we report on the preparation of a directional vertical array of micro-porous transport networks on LTO electrodes using a femtosecond laser processing strategy,enabling directional ion rapid transport and achieving good electrochemical performance in thick film electrodes.Various three-dimensional(3D)vertically aligned micro-pore networks are innovatively designed,and the structure,kinetics characteristics,and electrochemical performance of the prepared ion transport channels are analyzed and discussed by multiple characterization and testing methods.Furthermore,the rational mechanisms of electrode performance improvement are studied experimentally and simulated from two aspects of structural mechanics and transmission kinetics.The ion diffusion coefficient,rate performance at 60 C,and electrode interface area of the laser-optimized 60-15%micro-porous transport network electrodes increase by 25.2 times,2.2 times,and 2.15 times,respectively than those of untreated electrodes.Therefore,the preparation of 3D micro-porous transport networks by femtosecond laser on ultra-thick electrodes is a feasible way to develop high-energy batteries.In addition,the unique micro-porous transport network structure can be widely extended to design and explore other high-performance energy materials.

Effect of sample temperature on femtosecond laser ablation of copper

We conduct an experimental study supported by theoretical analysis of single laser ablating copper to investigate the interactions between laser and material at different sample temperatures,and predict the changes of ablation morphology and lattice temperature.For investigating the effect of sample temperature on femtosecond laser processing,we conduct experiments on and simulate the thermal behavior of femtosecond laser irradiating copper by using a two-temperature model.The simulation results show that both electron peak temperature and the relaxation time needed to reach equilibrium increase as initial sample temperature rises.When the sample temperature rises from 300 K to 600 K,the maximum lattice temperature of the copper surface increases by about 6500 K under femtosecond laser irradiation,and the ablation depth increases by 20%.The simulated ablation depths follow the same general trend as the experimental values.This work provides some theoretical basis and technical support for developing femtosecond laser processing in the field of metal materials.

Ultrarelativistic Fe plasma with GJ/cm^(3) energy density created by femtosecond laser pulses

The generation of a plasma with an ultrahigh energy density of 1.2 GJ/cm^(3)(which corresponds to about 12 Gbar pressure) is investigated by irradiating thin stainless-steel foils with high-contrast femtosecond laser pulses with relativistic intensities of up to 10^(22) W/cm^(2).The plasma parameters are determined by X-ray spectroscopy.The results show that most of the laser energy is absorbed by the plasma at solid density,indicating that no pre-plasma is generated in the current experimental setup.

Femtosecond laser ultrafast photothermal exsolution

Exsolution,as an effective approach to constructing particle-decorated interfaces,is still challenging to yield interfacial films rather than isolated particles.Inspired by in vivo near-infrared laser photothermal therapy,using 3 mol%Y_(2)O_(3)stabilized tetragonal zirconia polycrystals(3Y-TZP)as host oxide matrix and iron-oxide(Fe3O4/γ-Fe_(2)O_(3)/α-Fe_(2)O_(3))materials as photothermal modulator and exsolution resource,femtosecond laser ultrafast exsolution approach is presented enabling to conquer this challenge.The key is to trigger photothermal annealing behavior via femtosecond laser ablation to initialize phase transition from monoclinic zirconia(m-ZrO_(2))to tetragonal zirconia(t-ZrO_(2))and induce t-ZrO_(2)columnar crystal growth.Fe-ions rapidly segregate along grain boundaries and diffuse towards the outmost surface,and become‘frozen’,highlighting the potential to use photothermal materials and ultrafast heating/quenching behaviors of femtosecond laser ablation for interfacial exsolution.Triggering interfacial iron-oxide coloring exsolution is composition and concentration dependent.Photothermal materials themselves and corresponding photothermal transition capacity play a crucial role,initializing at 2 wt%,3 wt%,and 5 wt%for Fe3O4/γ-Fe_(2)O_(3)/α-Fe_(2)O_(3)doped 3Y-TZP samples.Due to different photothermal effects,exsolution states of ablated 5 wt%Fe_(3)O_(4)/γ-Fe_(2)O_(3)/α-Fe_(2)O_(3)-doped 3Y-TZP samples are totally different,with whole coverage,exhaustion(ablated away)and partial exsolution(rich in the grain boundaries in subsurface),respectively.Femtosecond laser ultrafast photothermal exsolution is uniquely featured by up to now the deepest microscale(10μm from 5 wt%-Fe_(3)O_(4)-3Y-TZP sample)Fe-elemental deficient layer for exsolution and the whole coverage of exsolved materials rather than the formation of isolated exsolved particles by other methods.It is believed that this novel exsolution method may pave a good way to modulate interfacial properties for extensive applications in the fields of biology,optics/photonics,energy,catalysis,environment,etc.

Self-propelled Leidenfrost droplets on femtosecond-laser-induced surface with periodic hydrophobicity gradient

The controllable transfer of droplets on the surface of objects has a wide application prospect in the fields of microfluidic devices,fog collection and so on.The Leidenfrost effect can be utilized to significantly reduce motion resistance.However,the use of 3D structures limits the widespread application of self-propulsion based on Leidenfrost droplets in microelectromechanical system.To manipulate Leidenfrost droplets,it is necessary to create 2D or quasi-2D geometries.In this study,femtosecond laser is applied to fabricate a surface with periodic hydrophobicity gradient(SPHG),enabling directional self-propulsion of Leidenfrost droplets.Flow field analysis within the Leidenfrost droplets reveals that the vapor layer between the droplets and the hot surface can be modulated by the SPHG,resulting in directional propulsion of the inner gas.The viscous force between the gas and liquid then drives the droplet to move.

High performance micromachining of sapphire by laser induced plasma assisted ablation(LIPAA)using GHz burst mode femtosecond pulses

GHz burst-mode femtosecond(fs)laser,which emits a series of pulse trains with extremely short intervals of several hundred picoseconds,provides distinct characteristics in materials processing as compared with the conventional irradiation scheme of fs laser(single-pulse mode).In this paper,we take advantage of the moderate pulse interval of 205 ps(4.88 GHz)in the burst pulse for high-quality and high-efficiency micromachining of single crystalline sapphire by laser induced plasma assisted ablation(LIPAA).Specifically,the preceding pulses in the burst generate plasma by ablation of copper placed behind the sapphire substrate,which interacts with the subsequent pulses to induce ablation at the rear surface of sapphire substrates.As a result,not only the ablation quality but also the ablation efficiency and the fabrication resolution are greatly improved compared to the other schemes including single-pulse mode fs laser direct ablation,single-pulse mode fs-LIPAA,and nanosecond-LIPAA.

635 nm femtosecond fiber laser oscillator and amplifier

Although visible femtosecond lasers based on nonlinear frequency conversion of Ti:sapphire femtosecond oscillators or near-infrared ultrafast lasers have been well developed,limitations in terms of footprint,cost,and efficiency have called for alternative laser solutions.The fiber femtosecond mode-locked oscillator as an ideal solution has achieved great success in the 0.9 to 3.5μm infrared wavelengths,but remains an outstanding challenge in the visible spectrum(390 to 780 nm).Here,we tackle this challenge by introducing a visible-wavelength mode-locked femtosecond fiber oscillator along with an amplifier.This fiber femtosecond oscillator emits red light at 635 nm,employs a figure-nine cavity configuration,applies a double-clad Pr3þ-doped fluoride fiber as the visible gain medium,incorporates a visible-wavelength phase-biased nonlinear amplifying loop mirror(PB-NALM)for mode locking,and utilizes a pair of customized high-efficiency and high-groove-density diffraction gratings for dispersion management.Visible self-starting mode locking established by the PB-NALM directly yields red laser pulses with a minimum pulse duration of 196 fs and a repetition rate of 53.957 MHz from the oscillator.Precise control of the grating pair spacing can switch the pulse state from a dissipative soliton or a stretched-pulse soliton to a conventional soliton.In addition,a chirped-pulse amplification system built alongside the oscillator immensely boosts the laser performance,resulting in an average output power over 1W,a pulse energy of 19.55 nJ,and a dechirped pulse duration of 230 fs.Our result represents a concrete step toward high-power femtosecond fiber lasers covering the visible spectral region and could have important applications in industrial processing,biomedicine,and scientific research.

Evaluation of the Clinical Efficacy of Full Femtosecond Laser Surgery in the Treatment of Myopia

Objective:To evaluate the clinical effect of full femtosecond laser surgery in the treatment of myopia patients.Methods:120 myopia patients admitted to our hospital from January 2022 to June 2023 were selected.According to the random number table method,60 patients in the observation group underwent full femtosecond laser surgery,and 60 patients in the control group underwent femtosecond laser-assisted in situ keratomileusis(FS-LASIK)surgery.The clinical effects of the two groups were compared.Results:10 days postoperatively and 6 months after operation,the visual acuity level of the observation group was higher than that of the control group,the postoperative corneal asphericity coefficient and corneal full-thickness were lower than those of the control group,and the total effective rate 6 months after operation was higher than that of the control group(P<0.05).Conclusion:Full femtosecond laser surgical treatment can improve the postoperative visual acuity of patients with myopia,enhance the corneal asphericity coefficient(Q)and corneal full-thickness,and exert significant clinical effects.

Measurement of spatiotemporal characteristics of femtosecond laser pulses by a modified single-shot autocorrelation

To overcome the shortcomings of the single-shot autocorrelation SSA where only one pulse width is obtained when the SSA is applied to measure the pulse width of ultrashort laser pulses a modified SSA for measuring the spatiotemporal characteristics of ultrashort laser pulses at different spatial positions is proposed. The spatiotemporal characteristics of femtosecond laser pulses output from the Ti sapphire regenerative amplifier system are experimentally measured by the proposed method. It was found that the complex spatial characteristics are measured accurately.The pulse widths at different spatial positions are various which obey the Gaussian distribution.The pulse width at the same spatial position becomes narrow with the increase in input average power when femtosecond laser pulses pass through a carbon disulfide CS2 nonlinear medium.The experimental results verify that the proposed method is valid for measuring the spatiotemporal characteristics of ultrashort laser pulses at different spatial positions.

Improvement of pump-probe optical measurement technique using double moving stages

In order to improve the measurement precision and increase the reliability of the femtosecond laser transient thermoreflectance system, the relative optical path difference between pump and probe beams is prolonged, which can improve the fitting accuracy of the experimental data to the theoretical model. A modified experimental setup is devised with the pump path intercalated a moving stage identical to the one in the probe path, which extends the optical path difference of the probe beam relative to the pump beam from 4 to 8 ns. The measured results indicate that the uncertainty from the misalignment and divergence of both beams can be ignored when the last 4 ns experimental data are connected with those of the first 4 ns smoothly. The as-obtained thermal conductance of AI/Si and Cr/Si interfaces agrees well with the reported experimental values, which verifies the reliability of this modified version of this measurement.

Fourier Spectrometer based on Wide-range and Phase-locked Michelson Interferometer with Femtosecond Laser Excitation

A wide-range and phase-locked Michelson interferometer technique is described. This technique combined with femtosecond laser is used to measure the spectrum of the rare-earth ion Nd：YVO4, which presents very high signal to noise ratio of interferometric intensity output and higher spectral resolution than traditional grating spectrophotometer.

Three-year results of small incision lenticule extraction and wavefront-guided femtosecond laser-assisted laser in situ keratomileusis for correction of high myopia and myopic astigmatism

AIM： To compare and calculate the 3-year refractive results, higher-order aberrations （HOAs）, contrast sensitivity （CS） and dry eye parameters after small incision lenticule extraction （SMILE） and wavefront-guided femtosecond laser-assisted laser in situ keratomileusis （FS-LASIK） for correction of high myopia and myopic astigmatism. METHODS： In this prospective, non-randomized comparative study, 78 eyes with spherical equivalent （SE） of -8.11±1.09 diopters （D） received a SMILE surgery, and 65 eyes with SE of -8.05±1.12 D received a wavefront-guided FS-LASIK surgery with the VisuMax femtosecond laser （Carl Zeiss Meditec, Jena, Germany） for flap cutting. Visual acuity, manifest refraction, CS, HOAs, ocular surface disease index （OSDI） and tear break-up time （TBUT） were evaluated during a 3-year follow-up. RESULTS： The difference of uncorrected distance visual acuity （UDVA） postoperatively was achieved at lmo and at 3mo, whereas the difference of the mean UDVA between two groups at 3y were not statistically significant （t=-1.59, P=-0.13）. The postoperative change of SE was 0.89 D in the FS-LASIK group （t=5.76, P=0.00）, and 0.14 D in the SMILE group （t=-0.54, P=0.59） from lmo to 3y after surgery. At 3-year postoperatively, both HOAs and spherical aberrations in the SMILE group were obviously less than those in the FS-LASIK group （P=0.00）, but the coma root mean square （RMS） was higher in the SMILE group （0.59±0.26） than in the FS-LASIK group （0.29±0.14, P=0.00）. The mesopic CS values between two groups were not statistically significant at 3y postoperatively. Compared with the FS-LASIK group, lower OSDI scores and longer TBUT values were found in the SMILE group at Imo and 3mo postoperatively. With regard to safety, no eye lost any line of CDVA in both groups at 3y after surgery. CONCLUSION： Both SMILE and wavefront-guided FS- LASIK procedures provide good visual outcomes. Both procedures are effective and safe, but SMILE surgery achieve more stable long-term refractive outcome and better control of early postoperative dry eye as compared to FS-LASIK.

Comparing the intraoperative complication rate of femtosecond laser-assisted cataract surgery to traditional phacoemulsification

AIM: To compare the complication rate of femtosecond laser-assisted cataract surgery(FLACS) and traditional phacoemulsification for the first 18 mo of FLACS use at a private surgical center in Hawaii.METHODS: A retrospective chart review was conducted from January 2012 to June 2013. The first 273 consecutive eyes receiving FLACS and 553 eyes receiving traditional phacoemulsification were examined.All surgeries were performed at a single surgical center in Hawaii. The presence of intraoperative complications was used as the main outcome measure. Approval was obtained from the institutional review board of the University of Hawaii.RESULTS: The overall complication rate for FLACS was 1.8%, while that of the traditional procedure was5.8%(P 【0.05). A majority of the surgeons(80%) had a lower complication rate while using FLACS.CONCLUSION: FLACS is comparable in safety, if not safer, than traditional cataract surgery when performed by qualified cataract surgeons on carefully selected patients.

Corneal flap morphological analysis using anterior segment optical coherence tomography in laser in situ keratomileusis with femtosecond lasers versus mechanical microkeratome

AIM: To assess and compare the flap morphology using anterior segment optical coherence tomography (AS-OCT) in laser in situ keratomileusis (LASIK) with Femto LDV femtosecond lasers versus Hansatome mechanical Microkeratome. METHODS: AS-OCT (Visante) was used to compare 1 month postoperatively the morphology of the flaps created with Femto LDV femtosecond lasers or Hansatome Microkeratome. The intendedfiap thickness was 110 mu m and 160 mu m respectively. The thickness of twenty-five points across each flap, which were 0mm, 1.5mm, 2.5mm, and 3.5mm to the corneal vertex on the horizontal, vertical, 45 degrees and 135 degrees meridian respectively, was evaluated. RESULTS: One month postoperative, the central flap thickness in the Femto LDV group was 107.43 +/- 4.70 mu m, while 125.90 +/- 17.50 mu m in the Hansatome group. The difference between the actual and the expectedfiap thickness was 5.61 +/- 3.84 mu m and 31.52 +/- 12.27 mu m, respectively. The Hansatome group had presented a statistically significant result (P<0.001). Flap morphology showed a more regular planar shape in the Femto LDV group and a meniscus shape in the Hansatome group. CONCLUSION: AS-OCT is a direct and fast procedure to assess the flap morphology. The morphology by AS-OCT showed that the flaps created with Femto LDV femtosecond laser were more accurate and regular than the flaps created with Hansatome microkeratome.

Comparison of visual acuity, refractive results and complications of femtosecond laser with mechanical microkeratome in LASIK

AIM: To compare the outcomes of laser in situ keratomileusis (LASIK) performed with a femtosecond laser (Femtec, Technolas Perfect Vision GmbH, Germany) versus a mechanical microkeratome (Hansatome, Bausch and Lomb, USA) for the correction of myopia and astigmatism. ·METHODS: In this retrospective study, patients who had undergone LASIK using the 80 -kHz Femtec femtosecond laser were compared to age- and refraction- matched patients in whom the Hansatome microkeratome was used. Refractive and visual results 1 month and 3 months postoperatively, and complication rates were compared between the two groups. ·RESULTS: A total of 280 eyes were analyzed (140 in each group). At 3 months postoperatively in the Femtec vs Hansatome group, spherical equivalent refraction was within ±1.00D of emmetropia in 140 vs 138 eyes (P = 0.498), the cylinder was within ±0.50D in 137 vs 139 eyes (P =0.622), and the UDVA was 20/20 or better in 136 vs 137 eyes (P =0.724), respectively. There was no statistically significant difference in the complication rates between the two groups (P =0.099). ·CONCLUSION: LASIK performed both with Femtec femtosecond laser and Hansatome microkeratome achieved satisfactory refractive and visual results at 3 months postoperatively, without significant differences in efficacy, safety, and complication rates between the two procedures.

Clinical outcomes of small incision lenticule extraction versus femtosecond laser-assisted LASIK for myopia: a Meta-analysis

AIM：To evaluate the possible differences in visual quality between small incision lenticule extraction（SMILE）and femtosecond laser in situ keratomileusis（FS-LASIK）for myopia.METHODS：A Meta-analysis was performed.Patients were from previously reported comparative studies treated with SMILE versus FS-LASIK.The Pub Med,EMBASE,Cochrane,Web of Science and Chinese databases（i.e.WANFANG and CNKI）were searched in Nov.of 2016 using Rev Man 5.1 version software.The differences in visual acuity,aberration and biomechanical effects within six months postoperatively were showed.Twenty-seven studies including 4223 eyes were included.RESULTS：No significant differences were observed between SMILE and FS-LASIK in terms of the proportion of eyes that lost one or more lines of corrected distance visual acuity after surgery（P=0.14）,the proportion of eyes achieving an uncorrected distance visual acuity of 20/20or better（P=0.43）,the final refractive spherical equivalent（P=0.89）,the refractive spherical equivalent within±1.00diopter of the target values（P=0.80）,vertical coma（P=0.45）and horizontal coma（P=0.06）.Compared with the FSLASIK group,total higher-order aberration（P〈0.001）and spherical aberration（P〈0.001）were higher and the decrease in corneal hysteresis（P=0.0005）and corneal resistance factor（P=0.02）were lower in the SMILE group.CONCLUSION：SMILE and FS-LASIK are comparable in efficacy,safety and predictability for correcting myopia.However,the aberration in the SMILE group is superior to that in the FS-LASIK group,and the loss of biomechanical effects may occur less frequently after SMILE than after FS-LASIK.

Effect of suction on macular thickness and retinal nerve fiber layer thickness during LASIK used femtosecond laser and Moria M2 microkeratome

·AIM: To compare the effect of suction on the macular thickness and retinal nerve fiber layer(RNFL) thickness during laser in situ keratomileusis(LASIK) used Ziemer FEMTO LDV femtosecond laser(Ziemer group) and Moria M2 automated microkeratome(Moria group) for flap creation.· METHODS: Fourier-domain optical coherence tomography(FD-OCT) was used to measure macular thickness, ganglion cell complex thickness and RNFL thickness of 204 eyes of 102 patients with the Ziemer femtosecond laser(102 eyes) and the Moria M2microkeratome(102 eyes) before surgery and 30min; 1,3d; 1wk; 1, 3mo; 1y after surgery.· RESULTS: The average foveal thickness and parafoveal retinal thickness 30 min after the surgery were statistically more than that before surgery(Ziemer P 【0.001,P =0.003 and Moria P=0.001, P=0.006) and the effect was less in the Ziemer group than that in the Moria group(P all 【0.05). The ganglion cell complex thickness was not significantly changed in both groups(P all 】0.05). The RNFL thickness was statistically less 30 min after surgery in both groups(P=0.014, P 【0.001), but the influence was less in Ziemer group than that in Moria group(P =0.038).However, the RNFL thickness had recovered to the preoperative level only 1d after surgery.·CONCLUSION: The suction of femtosecond laser and mechanical microkeratome led to the increase in macular central fovea thickness and the decrease in RNFL thickness values at the early stage after LASIK. The effect of suction on macular and the RNFL thicknesses in Ziemer group is smaller than that in Moria group.