Enhanced Fenton-like process over Cu/L(+)-ascorbic acid co-doping mesoporous silica for toxicity reduction of emerging contaminants

Effective removal of emerging contaminants(ECs)to minimize their impacts on human health and the natural environment is a global priority.For the removal of ECs in water,we fabricated a seaweed spherical microsphere catalyst with Cu cation-πstructures by in situ doping of Cu species and ascorbic acid in mesoporous silica(Cu-C-MSNs)via a hydrothermal method.The results indicate that bisphenol A(BPA)is substantially degraded within 5 min under natural conditions,with its biological toxicity considerably weakened.Moreover,industrial wastewater could also be effectively purified by Cu-C-MSNs/H_(2)O_(2) system.The presence of metal sites and the complexation of ECs via cation-πinteraction andπ-πstacking on the catalyst surface were directly responsible for the polarization distribution of electrons,thus activating H_(2)O_(2) and dissolved oxygen(DO).The removal of contaminants could be attributed primarily to 1)the activation of H_(2)O_(2) into ^(·)OH to attack the contaminants and 2)self-cleavage because of the transfer of electrons from the contaminants to the catalysts.This study provides an innovative solution for the effective treatment of ECs and has positive implications for easing global environmental crises.

Efficient chemical mechanical polishing of W promoted by Fenton-like reaction between Cu^(2+)and H_(2)O_(2)

The Fenton-like reaction between Cu^(2+)and H_(2)O_(2)was employed in chemical mechanical polishing to achieve efficient and high-quality processing of tungsten.The microstructure evolution and material removal rate of tungsten during polishing process were investigated via scanning electron microscopy,X-ray photoelectron spectroscopy,ultraviolet−visible spectrophotometry,and electrochemical experiments.The passivation behavior and material removal mechanism were discussed.Results show that the use of mixed H_(2)O_(2)+Cu(NO_(3))_(2)oxidant can achieve higher polishing efficiency and surface quality compared with the single oxidant Cu(NO_(3))_(2)or H_(2)O_(2).The increase in material removal rate is attributed to the rapid oxidation of W into WO_(3)via the chemical reaction between the substrate and hydroxyl radicals produced by the Fenton-like reaction.In addition,material removal rate and static etch rate exhibit significantly different dependencies on the concentration of Cu(NO_(3))_(2),while the superior oxidant for achieving the balance between polishing efficiency and surface quality is 0.5 wt.%H_(2)O_(2)+1.0 wt.%Cu(NO_(3))_(2).

Carbon-doped CuFe_(2)O_(4) with C-O-M channels for enhanced Fenton-like degradation of tetracycline hydrochloride: From construction to mechanism

Carbon-doped copper ferrite(C–CuFe_(2)O_(4))was synthesized by a simple two-step hydrothermal method,which showed enhanced tetracycline hydrochloride(TCH)removal efficiency as compared to the pure CuFe_(2)O_(4) in Fenton-like reaction.A removal efficiency of 94%was achieved with 0.2 g L^(-1) catalyst and 20 mmol L^(-1) H_(2)O_(2) within 90 min.We demonstrated that 5%C–CuFe_(2)O_(4) catalyst in the presence of H_(2)O_(2) was significantly efficient for TCH degradation under the near-neutral pH(5–9)without buffer.Multiple techniques,including SEM,TEM,XRD,FTIR,Raman,XPS M€ossbauer and so on,were conducted to investigate the structures,morphologies and electronic properties of as-prepared samples.The introduction of carbon can effectively accelerate electron transfer by cooperating with Cu and Fe to activate H_(2)O_(2) to generate·OH and·O_(2)^(-).Particularly,theoretical calculations display that the p,p,d orbital hybridization of C,O,Cu and Fe can form C–O–Cu and C–O–Fe bonds,and the electrons on carbon can transfer to metal Cu and Fe along the C–O–Fe and C–O–Cu channels,thus forming electron-rich reactive centers around Fe and Cu.This work provides lightful reference for the modification of spinel ferrites in Fenton-like application.

Degradation of antipyrine in the Fenton-like process with a La-doped heterogeneous catalyst

The aim of this study was to synthesize a novel lanthanum(La)doped catalyst and to investigate antipyrine removal in wastewater using the Fenton-like process with the catalyst.The La-doped Co-Cu-Fe catalyst was synthesized using the modified hydrothermal method.Results showed that the Ladoped catalyst had higher specific surface area and lower particle size than the catalyst without La doping(i.e.,the control)(267 vs.163 m2/g and 14 vs.32 nm,respectively).Under the conditions of catalyst dosage 0.5 g/L,H2O2 concentration 1.70 g/L,and NaHCO3 0.1g/L,the antipyrine removal within 60 min using the Fenton-like process with the La-doped catalyst was much higher than that with the control(95%vs.54%).The hydroxyl radical concentration with the La-doped catalyst within 60 min was two times higher than that with the control(49.2 vs.22.1 gg/L).The high catalytic activity of La-doped catalyst was mainly attributed to its high specific surface area based on the X-ray photoelectron spectroscopy result.Our La-doped catalyst should have great potential to remove antipyrine in wastewater using the heterogeneous Fenton-like process.

Application of response surface methodology for optimization of Orange Ⅱ removal by heterogeneous Fenton-like process using Fe_3O_4nanoparticles

In this study, Fe3O4nanoparticles（Fe3O4NPs） were successfully prepared via oxidation–precipitation method and characterized by scanning electron microscopy（SEM）, X-ray diffraction（XRD） and Fourier transform infrared spectroscopy（FT-IR）. The characterization results indicated that Fe3O4 NPs with regular crystal structure and a narrow of diameters had been synthesized successfully and had high purity. A series of experiments were carried out to investigate the degradation of Orange II by the obtained heterogeneous Fe3O4 catalysts in the presence of H2O2. The response surface methodology（RSM） based on Box–Behnken design（BBD） was employed to design and optimize individual and interactive effects of the four main independent parameters（catalyst loading, initial p H, reaction temperature and H2O2concentration） on decolorization efficiency of Orange II. A significant quadratic model（p-value 〈0.0001, R2= 0.9369） was derived using analysis of variance（ANOVA）. Optimum conditions were catalyst loading of 1.5 g/L, initial p H of 2.7, reaction temperature of 42 8C and H2O2 concentration of 22 mmol/L, respectively. The predicted decolorization rate under the optimum conditions as determined by the proposed model was 99.55%. Confirmatory tests were carried out and the decolorization rate of 99.49% was observed under the optimum conditions, which agreed well with the model prediction.

Graphitized Cu-β-cyclodextrin polymer driving an efficient dual-reaction-center Fenton-like process by utilizing electrons of pollutants for water purification

Excessive consumption of energy and resources is a major challenge in wastewater treatment.Here,a novel heterogeneous Fenton-like catalyst consisting of Cu-doped graphenelike catalysts (Cu-GCD NSs) was first synthesized by an enhanced carbothermal reduction of β-cyclodextrin (β-CD).The catalyst exhibits excellent Fenton-like catalytic activity for the degradation of various pollutants under neutral conditions,accompanied by low H_(2)O_(2)consumption.The results of structural characterization and theoretical calculations confirmed that the dual reaction centers (DRCs) were constructed on Cu-GCD NSs surface through C-O-Cu bonds supported on zero-valent copper species,which play a significant role in the high-performance Fenton-like reaction.The pollutants that served as electron donors were decomposed in the electron-poor carbon centers,whereas H_(2)O_(2)and dissolved oxygen obtained these electrons in the electron-rich Cu centers through C-O-Cu bonds,thereby producing more active species.This study demonstrates that the electrons of pollutants can be efficiently utilized in Fenton-like reactions by DRCs on the catalyst surface,which provides an effective strategy to improve Fenton-like reactivity and reduce H_(2)O_(2)consumption.

Dendritic spine degeneration:a primary mechanism in the aging process

Recent reports suggest that aging is not solely a physiological process in living beings;instead, it should be considered a pathological process or disease(Amorim et al., 2022). Consequently, this process involves a wide range of factors, spanning from genetic to environmental factors, and even includes the gut microbiome(GM)(Mayer et al., 2022). All these processes coincide at some point in the inflammatory process, oxidative stress, and apoptosis, at different degrees in various organs and systems that constitute a living organism(Mayer et al., 2022;AguilarHernández et al., 2023).

Prediction and optimization of flue pressure in sintering process based on SHAP

Sinter is the core raw material for blast furnaces.Flue pressure,which is an important state parameter,affects sinter quality.In this paper,flue pressure prediction and optimization were studied based on the shapley additive explanation(SHAP)to predict the flue pressure and take targeted adjustment measures.First,the sintering process data were collected and processed.A flue pressure prediction model was then constructed after comparing different feature selection methods and model algorithms using SHAP+extremely random-ized trees(ET).The prediction accuracy of the model within the error range of±0.25 kPa was 92.63%.SHAP analysis was employed to improve the interpretability of the prediction model.The effects of various sintering operation parameters on flue pressure,the relation-ship between the numerical range of key operation parameters and flue pressure,the effect of operation parameter combinations on flue pressure,and the prediction process of the flue pressure prediction model on a single sample were analyzed.A flue pressure optimization module was also constructed and analyzed when the prediction satisfied the judgment conditions.The operating parameter combination was then pushed.The flue pressure was increased by 5.87%during the verification process,achieving a good optimization effect.

An Unprecedented Efficiency with Approaching 21%Enabled by Additive‑Assisted Layer‑by‑Layer Processing in Organic Solar Cells

Recently published in Joule,Feng Liu and colleagues from Shanghai Jiaotong University reported a record-breaking 20.8%power conversion efficiency in organic solar cells(OSCs)with an interpenetrating fibril network active layer morphology,featuring a bulk p-in structure and proper vertical segregation achieved through additive-assisted layer-by-layer deposition.This optimized hierarchical gradient fibrillar morphology and optical management synergistically facilitates exciton diffusion,reduces recombination losses,and enhances light capture capability.This approach not only offers a solution to achieving high-efficiency devices but also demonstrates the potential for commercial applications of OSCs.

Excellent dye degradation performance of FeSiBP amorphous alloys by Fenton-like process

Amorphous alloys are being newly applied in wastewater treatment because of their unique atomic packing structure.They possess excellent degradation efficiency,stability and reusability.In this work,Fe_(80)Si_(10)B_(10) and Fe_(83)Si_(5)B_(8)P_(4) amorphous ribbons exhibited ad-vanced catalytic performance for the degradation of Methyl Blue(MB)and Rhodamine B(RhB)dyes,and the color removal reach nearly 100%within 11 min for both the dyes.Com-pared with the Fe_(80)Si_(10)B_(10) amorphous ribbon,the Fe_(83)Si_(5)B_(8)P_(4) ribbon showed higher degra-dation efficiency due to its lower reaction activation energy,higher electron transfer ability and higher Fe content,and the formation of the galvanic cell between the strong Fe-P bonds and the weak Fe-B bonds.It also exhibited high stability and reusability.The degradation ef-ficiency was improved when the appropriate concentration of H_(2)O_(2) is added.As regards the pH,high degradation efficiency was observed in acidic MB solution,but it decreased as the pH increased up to pH 7.The application of the electro-Fenton-like process is discussed,which can effectively improve the degradation performance in a nearly natural solution.This study presents a high efficiency low-cost catalyst for synthetic dye degradation and expands the functional applications of Fe-based amorphous alloys.

Processing,microstructure,and mechanical properties of wire arc additively-manufactured AZ91 magnesium alloy using cold arc process

Thin walls of an AZ91 magnesium alloy with fine equiaxed grains were fabricated via cold arc-based wire arc additive manufacturing(CA-WAAM),and the droplet transfer behaviours,microstructures,and mechanical properties were investigated.The results showed that the cold arc process reduced splashing at the moment of liquid bridge breakage and effectively shortened the droplet transfer period.The microstructures of the deposited samples exhibited layered characteristics with alternating distributions of coarse and fine grains.During layer-by-layer deposition,the β-phase precipitated and grew preferentially along grain boundaries,while the fineη-Al_(8)Mn_(5)phase was dispersed in the α-Mg matrix.The mechanical properties of the CA-WAAM deposited sample showed isotropic characteristics.The ultimate tensile strength and elongation in the building direction(BD)were 282.7 MPa and 14.2%,respectively.The microhardness values of the deposited parts were relatively uniform,with an average value of HV 69.6.

Influence of material characteristics on the failure mode and process of landslide dam

Landslide dams,as frequent natural hazards,pose significant risks to human lives,property,and ecological environments.The grading characteristics and density of dam materials play a crucial role in determining the stability of landslide dams and the potential for dam breaches.To explore the failure mechanisms and evolutionary processes of landslide dams with varying soil properties,this study conducted a series of flume experiments,considering different grain compositions and material densities.The results demonstrated that grading characteristics significantly influence landslide dam stability,affecting failure patterns,breach processes,and final breach morphologies.Fine-graded materials exhibited a sequence of surface erosion,head-cut erosion,and subsequent surface erosion during the breach process,while well-graded materials typically experienced head-cut erosion followed by surface erosion.In coarse-graded dams,the high permeability of coarse particles allowed the dam to remain stable,as inflows matched outflows.The dam breach model experiments also showed that increasing material density effectively delayed the breach and reduced peak breach flow discharge.Furthermore,higher fine particle content led to a reduction in the residual dam height and the base slope of the final breach profile,although the relationship between peak breach discharge and the content of fine and coarse particles was nonlinear.To better understand breach morphology evolution under different soil characteristics and hydraulic conditions,three key points were identified—erosion point,control point,and scouring point.This study,by examining the evolution of failure patterns,breach processes,and breach flow discharges under various grading and density conditions,offers valuable insights into the mechanisms behind landslide dam failures.

New digital drilling process monitoring: Instrumentation, validation and calibration

This study aims to enhance the digital drilling process monitoring(DPM)or monitoring while drilling(MWD)technique,which is a widely recognized method in geological exploration for evaluating rock mass quality.First,robust displacement and torque measurement facilities for rotary-core drilling are discussed.The conventional cable encoder for displacement measurement is replaced with a magnetostrictive displacement sensor,which is more reliable in harsh field drilling environments.This enables the measurement of the bit position with an accuracy of<1 mm.Most importantly,this new instrument is proven to be successful in improving the detection of structural discontinuities with thicknesses>1 mm.In addition,by measuring the electric current of the driving motor,the torque applied to the bit is conveniently and accurately converted.These innovations ensure high-quality data collection for DPM practices.Second,two indices derived from DPM are proposed to quantitatively describe rock mass quality.The specific energy index(SEI)and specific penetration index(SPI)are based on the principles of energy conservation and Mohr-Coulomb failure criterion,respectively.Extensive field tests conducted in a dam grouting area confirm a linear relationship between the thrust force and penetration per rotation,and between the torque and penetration per rotation.The correlation ratios of the related regressions are typically>0.9.These two indices allow for the quantitative interpretation of DPM data into rock mechanics characteristics,such as uniaxial compressive strength,rock quality designation(RQD),and rock mass permeability,eliminating the need for subjective judgment normally involved in the currently used rock mass quality rating approaches.

Green synthesis of bentonite-supported iron nanoparticles as a heterogeneous Fenton-like catalyst:Kinetics of decolorization of reactive blue 238 dye

This study aimed to synthesize green tea nano zero-valent iron(GT-NZVI)and bentonite-supported green tea nano zero-valent iron(BGT-NZVI)nanoparticles using green tea extracts in an environmentally sustainable way.Bentonite was used as a support material because it disperses and stabilizes GT-NZVI,and it helps to reduce the cost,increase the adsorption capacity of GT-NZVI,and decrease the optimum amount of GT-NZVI used in Fenton-like oxidation.A scanning electron microscope,an atomic force microscope,and a Fourier transform infrared spectroscope were used to characterize GT-NZVI and B-GT-NZVI,while the zeta potential was measured to evaluate the stability of iron nanoparticles.The decolorization kinetics of reactive blue 238(RB 238)dye in the aqueous phase in the Fenton-like oxidation process were investigated as well.The effects of various experimental conditions such as reaction time,dosages of catalysts,concentration of H2O2,temperature,addition of inorganic salts,and other parameters were investigated.The results show that the oxidative degradation efficiencies of RB 238 dye catalyzed by GT-NZVI and B-GT-NZVI were 93.5%and 96.2%,respectively,at the optimum reaction conditions as follows:c(H2O2)¼5 mmol/L,r(GT-NZVI)¼0.5 g/L or r(B-GT-NZVI)¼0.5 g/L,c(RB 238 dye)¼0.05 mmol/L,and pH¼2.5 at 180 min.The best catalytic performance was exhibited when B-GT-NZVI was used.Three kinetic models were employed,and the second-order model was found to be the best model representing the experimental kinetic data of RB 238 dye.The value of activation energy decreased from 38.22 kJ/mol for GT-NZVI to 14.13 kJ/mol for B-GT-NZVI.This indicates that the effect of B-GT-NZVI in decreasing the energy barrier is more pronounced than that of the GT-NZVI catalyst,leading to improved Fenton-like oxidation processes.©2020 Hohai University.Production and hosting by Elsevier B.V.This is an open access article under the CC BY-NC-ND license(http://creativecommons.org/licenses/by-nc-nd/4.0/).

Photo-Fenton和Photo-Fenton-like试剂对萘羟基化反应的影响

实验以H_2O_2,乙腈、Fe(NO_3)_3·9H_2O、FeSO_4·7H_2O,为试剂,以自制光催化反应器制备了萘酚。研究了Photo-Fenton和Photo-Fenton-like反应体系中萘的羟基化反应,考察了Fe^(2+)、Fe^(3+)浓度、H_2O_2浓度、反应时间等因素对两种反应体系的影响。对于Photo-Fenton反应体系中,在[Fe^(2+)]=1.5mmol/L、[H_2O_2]=0.8 mol/L条件下,萘的转化率达43%,1-萘酚的收率为2.8%。对于Photo-Fenton-like反应体系,在[Fe^(3+)]=4.5 mmol/L,[H_2O_2]=0.2 mol/L条件下,萘的转化率为17%,1-萘酚的收率达4.6%;同条件下[H_2O_2]提高至1.0 mol/L时,萘的转化率可达90%,但1-萘酚的收率却有所下降。

Process Simulate软件在自动化生产线安装调试课程中的应用

针对自动化生产线安装调试课程的实践教学难题提出了使用仿真软件进行虚拟装调的方案。介绍了如何使用Process Simulate软件对自动化生产线进行虚拟装调。实践证明,使用Process Simulate软件能够有效提高自动化生产线安装调试课程的实践教学效果。

基于Arduino与Processing的心率检测计设计研究

随着社会经济的高速发展,人们的物质生活也有了极大的提高,但同时也伴随着各种疾病的到来,身体健康已经成为人们普遍关注的焦点,因此,心率检测仪、血压计、血糖仪等各种家用医疗监测仪器已经逐渐融入日常生活。心脏病是人们难以预防的突发致命疾病之一,本文介绍的是一款基于Arduino【是基于易用硬件和软件的原型开源平台,包由可编程的电路板(简称微控制器),以及集成开发环境(称为Arduino IDE)的现成软件组成】Processing(开源编程语言,包括编辑器、编译器、展示器)的简易心率检测计系统,其功能实用、操作简单,可以测量心率,当超出正常心率范围时及时预警,是一款便携的实时心率测试仪。

Exploitation of Fenton and Fenton-like reagents as alternative conditioners for alum sludge conditioning

The use of Fenton＇s reagent （Fe^2＋/H2O2） and Fenton-like reagents containing transition metals of Cu（Ⅱ）, Zn（Ⅱ）, Co（Ⅱ）, and Mn（Ⅱ） for an alum sludge conditioning to improve its dewaterability was investigated. The results obtained were compared with those obtained from conditioning the same alum sludge using cationic and anionic polymers. Experimental results show that Fenton＇s reagent was the best among the Fenton and Fenton-like reagents for the alum sludge conditioning. A considerable effectiveness of capillary suction time （CST） reduction efficiency of 47% can be achieved under test conditions of Fe^2＋/H2O2 = 20/125 mg/g DS （dry solid） and pH 6.0. The observation of floc-like particles after Fenton＇s reagent conditioning of alum sludge suggested that the mechanism of Fenton＇s reagent conditioning was different from that of polymer conditioning. In spite of the lower efficiency in the CST reduction of Fenton＇s reagent in alum sludge conditioning compared to that of polymer conditioning, Fenton＇s reagent offers a more environmentally safe option. Tiffs study provided an example of proactive treatment engineering, which is aimed at seeking a safe alternative to the use of polymers in sludge conditioning towards achieving a more sustainable sludge management strategy.

Augmenting Intrinsic Fenton-Like Activities of MOF-Derived Catalysts via N-Molecule-Assisted Self-catalyzed Carbonization

To overcome the ever-growing organic pollutions in the water system,abundant efforts have been dedicated to fabricating efficient Fenton-like carbon catalysts.However,the rational design of carbon catalysts with high intrinsic activity remains a long-term goal.Herein,we report a new N-molecule-assisted self-catalytic carbonization process in augmenting the intrinsic Fenton-like activity of metal-organic-framework-derived carbon hybrids.During carbonization,the N-molecules provide alkane/ammonia gases and the formed iron nanocrystals act as the in situ catalysts,which result in the elaborated formation of carbon nanotubes(in situ chemical vapor deposition from alkane/iron catalysts)and micro-/meso-porous structures(ammonia gas etching).The obtained catalysts exhibited with abundant Fe/Fe-Nx/pyridinic-N active species,micro-/meso-porous structures,and conductive carbon nanotubes.Consequently,the catalysts exhibit high efficiency toward the degradation of different organic pollutions,such as bisphenol A,methylene blue,and tetracycline.This study not only creates a new pathway for achieving highly active Fenton-like carbon catalysts but also takes a step toward the customized production of advanced carbon hybrids for diverse energy and environmental applications.

Boron carbide boosted Fenton-like oxidation: A novel Fe(Ⅲ)/Fe(Ⅱ) circulation

The sluggish kinetics of Fe(Ⅱ)recovery in Fenton/Fenton-like reactions significantly limits the oxidation efficiency.In this study,we for the first time use boron carbide(BC)as a green and stable promotor to enhance the reaction of Fe(Ⅲ)/H_(2)O_(2) for degradation of diverse organic pollutants.Electron paramagnetic resonance analysis and chemical quenching/capturing experiments demonstrate that hydroxyl radicals(·OH)are the primary reactive species in the BC/Fe(Ⅲ)/H_(2)O_(2) system.In situ electrochemical analysis indicates that BC remarkably boosts the Fe(Ⅲ)/Fe(Ⅱ)redox cycles,where the adsorbed Fe(Ⅲ)cations were transformed to more active Fe(Ⅲ)species with a higher oxidative potential to react with H_(2)O_(2) to produce Fe(Ⅱ).Thus,the recovery of Fe(Ⅱ)from Fe(Ⅲ)is facilitated over BC surface,which enhancesOH generation via Fenton reactions.Moreover,BC exhibits outstanding reusability and stability in successive cycles and avoids the secondary pollution caused by conventional organic and metalliferous promotors.Therefore,metal-free BC boosting Fe(Ⅲ)/H_(2)O_(2) oxidation of organics provides a green and advanced strategy for water decontamination.