Robust and Tunable Ferroelectricity in Ba/Co Codoped (K_(0.5)Na_(0.5))NbO_(3) Ceramics

The 0.98(K_(0.5)Na_(0.5))NbO_(3)-0.02Ba(Nb_(0.5)Co_(0.5))O_(3-δ) ceramics with doped Ba^(2+) and Co^(2+) ions are fabricated,and the impacts of the thermal process are studied.Compared with the rapidly cooled (RC) sample,the slowly cooled (SC) sample possesses superior dielectric and ferroelectric properties,and an 11 K higher ferroelectricparaelectric phase transition temperature,which can be attributed to the structural characteristics such as the grain size and the degree of anisotropy.Heat treatment can reversibly modulate the content of the oxygen vacancies,and in turn the ferroelectric hysteresis loops of the samples.Finally,robust and tunable ferroelectric property is achieved in SC samples with good structural integrity.

Hole-Doped Nonvolatile and Electrically Controllable Magnetism in van der Waals Ferroelectric Heterostructures

Electrical control of magnetism in van der Waals semiconductors is a promising step towards development of two-dimensional spintronic devices with ultralow power consumption for processing and storing information.Here, we propose a design for two-dimensional van der Waals heterostructures(vdWHs) that can host ferroelectricity and ferromagnetism simultaneously under hole doping. By contacting an In Se monolayer and forming an InSe/In_(2)Se_(3) vd WH, the switchable built-in electric field from the reversible out-of-plane polarization enables robust control of the band alignment. Furthermore, switching between the two ferroelectric states(P_↑ and P_↓)of hole-doped In_(2)Se_(3) with an external electric field can interchange the ON and OFF states of the nonvolatile magnetism. More interestingly, doping concentration and strain can effectively tune the magnetic moment and polarization energy. Therefore, this provides a platform for realizing multiferroics in ferroelectric heterostructures,showing great potential for use in nonvolatile memories and ferroelectric field-effect transistors.

Structural and Ferroelectric Transition in Few-Layer HfO_(2) Films by First Principles Calculations

The discovery of ferroelectricity in HfO_(2)-based materials with high dielectric constant has inspired tremendous research interest for next-generation electronic devices.Importantly,films structure and strain are key factors in exploration of ferroelectricity in fluorite-type oxide HfO_(2) films.Here we investigate the structures and straininduced ferroelectric transition in different phases of few-layer HfO_(2) films(layer number𝑁=1–5).It is found that HfO_(2) films for all phases are more stable with increasing films thickness.Among them,the Pmn2_(1)(110)-oriented film is most stable,and the films of𝑁=4,5 occur with a𝑃21 ferroelectric transition under tensile strain,resulting in polarization about 11.8μC/cm^(2) along in-plane𝑎-axis.The ferroelectric transition is caused by the strain,which induces the displacement of Hf and O atoms on the surface to non-centrosymmetric positions away from the original paraelectric positions,accompanied by the change of surface Hf–O bond lengths.More importantly,three new stable HfO_(2)2D structures are discovered,together with analyses of computed electronic structures,mechanical,and dielectric properties.This work provides guidance for theoretical and experimental study of the new structures and strain-tuned ferroelectricity in freestanding HfO_(2) films.

BaTiO_(3)/p-GaN/Au self-driven UV photodetector with bipolar photocurrent controlled by ferroelectric polarization

Ferroelectric materials are promising candidates for ultraviolet photodetectors due to their ferroelectric effect.In this work,a BaTiO_(3)/p-GaN/Au hybrid heterojunction-Schottky self-driven ultraviolet photodetector was fabricated with excellent bipolar photoresponse property.At 0 V bias,the direction of the photocurrent can be switched by flipping the depolarization field of BaTiO_(3),which allows the performance of photodetectors to be controlled by the ferroelectric effect.Meanwhile,a relatively large responsivity and a fast response speed can be also observed.In particular,when the depolarization field of BaTiO_(3) is in the same direction of the built-in electric field of the Au/p-GaN Schottky junction(up polarized state),the photodetector exhibits a high responsivity of 18 mA/W at 360 nm,and a fast response speed of<40 ms at 0 V.These findings pave a new way for the preparation of high-performance photodetectors with bipolar photocurrents.

New‑Generation Ferroelectric AlScN Materials

Ferroelectrics have great potential in the field of nonvolatile memory due to programmable polarization states by external electric field in nonvolatile manner.However,complementary metal oxide semiconductor compatibility and uniformity of ferroelectric performance after size scaling have always been two thorny issues hindering practical application of ferroelectric memory devices.The emerging ferroelectricity of wurtzite structure nitride offers opportunities to circumvent the dilemma.This review covers the mechanism of ferroelectricity and domain dynamics in ferroelectric AlScN films.The performance optimization of AlScN films grown by different techniques is summarized and their applications for memories and emerging in-memory computing are illustrated.Finally,the challenges and perspectives regarding the commercial avenue of ferroelectric AlScN are discussed.

Large and nonlinear electric field response in a two-dimensional ferroelectric Rashba material

The achievement of electrical spin control is highly desirable.One promising strategy involves electrically mod-ulating the Rashba spin orbital coupling effect in materials.A semiconductor with high sensitivity in its Rashba constant to external electric fields holds great potential for short channel lengths in spin field-effect transistors,which is crucial for preserving spin coherence and enhancing integration density.Hence,two-dimensional(2D)Rashba semiconductors with large Rashba constants and significant electric field responses are highly desirable.Herein,by employing first-principles calculations,we design a thermodynamically stable 2D Rashba semiconductor,YSbTe_(3),which possesses an indirect band gap of 1.04 eV,a large Rashba constant of 1.54 eV·Åand a strong electric field response of up to 4.80 e·Å^(2).In particular,the Rashba constant dependence on the electric field shows an unusual nonlinear relationship.At the same time,YSbTe_(3)has been identified as a 2D ferroelectric material with a moderate polarization switching energy barrier(~0.33 eV per formula).By changing the electric polarization direction,the Rashba spin texture of YSbTe_(3)can be reversed.These out-standing properties make the ferroelectric Rashba semiconductor YSbTe_(3)quite promising for spintronic applications.

Ultra‑Stable Sodium‑Ion Battery Enabled by All‑Solid‑State Ferroelectric‑Engineered Composite Electrolytes

Symmetric Na-ion cells using the NASICON-structured electrodes could simplify the manufacturing process,reduce the cost,facilitate the recycling post-process,and thus attractive in the field of large-scale stationary energy storage.However,the long-term cycling performance of such batteries is usually poor.This investigation reveals the unavoidable side reactions between the NASICON-type Na_(3)V_(2)(PO_(4))_(3)(NVP)anode and the commercial liquid electrolyte,leading to serious capacity fading in the symmetric NVP//NVP cells.To resolve this issue,an all-solid-state composite electrolyte is used to replace the liquid electrolyte so that to overcome the side reaction and achieve high anode/electrolyte interfacial stability.The ferroelectric engineering could further improve the interfacial ion conduction,effectively reducing the electrode/electrolyte interfacial resistances.The NVP//NVP cell using the ferroelectric-engineered composite electrolyte can achieve a capacity retention of 86.4%after 650 cycles.Furthermore,the electrolyte can also be used to match the Prussianblue cathode NaxFeyFe(CN)_(6−z)·nH_(2)O(NFFCN).Outstanding long-term cycling stability has been obtained in the all-solid-state NVP//NFFCN cell over 9000 cycles at a current density of 500 mA g^(-1),with a fading rate as low as 0.005%per cycle.

Interfacial stress engineering toward enhancement of ferroelectricity in Al doped HfO_(2)thin films

Ferroelectric HfO_(2)has attracted much attention owing to its superior ferroelectricity at an ultra-thin thickness and good compatibility with Si-based complementary metal-oxide-semiconductor(CMOS)technology.However,the crystallization of polar orthorhombic phase(o-phase)HfO_(2)is less competitive,which greatly limits the ferroelectricity of the as-obtained ferroelectric HfO_(2)thin films.Fortunately,the crystallization of o-phase HfO_(2)can be thermodynamically modulated via interfacial stress engineering.In this paper,the growth of improved ferroelectric Al doped HfO_(2)(HfO_(2):Al)thin films on(111)-oriented Si substrate has been reported.Structural analysis has suggested that nonpolar monoclinic HfO_(2):Al grown on(111)-oriented Si substrate suffered from a strong compressive strain,which promoted the crystallization of(111)-oriented o-phase HfO_(2)in the as-grown HfO_(2):Al thin films.In addition,the in-plane lattice of(111)-oriented Si substrate matches well with that of(111)-oriented o-phase HfO_(2),which further thermally stabilizes the o-phase HfO_(2).Accordingly,an improved ferroelectricity with a remnant polarization(2P_(r))of 26.7C/cm^(2) has been obtained.The results shown in this work provide a simple way toward the preparation of improved ferroelectric HfO_(2)thin films.

Ferroelectricity Induced by Oxygen Vacancies in Rhombohedral ZrO_(2) Thin Films

Rhombohedral phase Hf_(x)Zr_(1.x)O_(2)(HZO,x from 0 to 1)films are promising for achieving robust ferroelectric polarization without the need for an initial wake-up pre-cycling,as is normally the case for the more commonly studied orthorhombic phase.However,a large spontaneous polarization observed in rhombohedral films is not fully understood,and there are also large discrepancies between experimental and theoretical predictions.In this work,in rhombohedral ZrO_(2)thin films,we show that oxygen vacancies are not only a key factor for stabilizing the phase,but they are also a source of ferroelectric polarization in the films.This is shown experimentally through the investigation of the structural properties,chemical composition and the ferroelectric properties of the films before and after an annealing at moderate temperature(400℃)in an oxygen environment to reduce the V_(o)concentration compared.The experimental work is supported by density functional theory(DFT)calculations which show that the rhombohedral phase is the most stable one in highly oxygen defective ZrO_(2)films.The DFT calculations also show that V_(o)contribute to the ferroelectric polarization.Our findings reveal the importance of V_(o)for stabilizing rhombohedral ZrO_(2)thin films with superior ferroelectric properties.

Enhanced ferroelectric and improved leakage of BFO-based thin films through increasing entropy strategy

BiFeO_(3)(BFO)has received considerable attention as a lead-free ferroelectric film due to its large theoretical remnant polariza-tion.However,BFO suffers from a large leakage current,resulting in poor ferroelectric properties.Herein,the sol-gel method was used to deposit a series of BFO-based thin films on fluorine-doped tin oxide substrates,and the effects of the substitution of the elements Co,Cu,Mn(B-site)and Sm,Eu,La(A-site)on the crystal structure,ferroelectricity,and leakage current of the BFO-based thin films were invest-igated.Results confirmed that lattice distortion by X-ray diffraction can be attributed to the substitution of individual elements in the BFO-based films.Sm and Eu substitutions contribute to the lattice distortion in a pseudo-cubic structure,while La is biased toward pseudo-tet-ragonal.Piezoelectric force microscopy confirmed that reversible switching of ferroelectric domains by nearly 180°can be realized through the prepared films.The ferroelectric hysteresis loops showed that the order for the polarization contribution is as follows:Cu>Co>Mn(B-site),Sm>La>Eu(A-site).The current density voltage curves indicated that the order for leakage contribution is as follows:Mn<Cu<Co(B-site),La<Eu<Sm(A-site).Scanning electron microscopy showed that the introduction of Cu elements facilitates the formation of dense grains,and the grain size distribution statistics proved that La element promotes the reduction of grain size,leading to the increase of grain boundaries and the reduction of leakage.Finally,a Bi_(0.985)Sm_(0.045)La_(0.03)Fe_(0.96)Co_(0.02)Cu_(0.02)O_(3)(SmLa-CoCu)thin film with a qualitative leap in the remnant polarization from 25.5(Bi_(0.985)Sm_(0.075)FeO_(3))to 98.8µC/cm^(2)(SmLa-CoCu)was prepared through the syner-gistic action of Sm,La,Co,and Cu elements.The leakage current is also drastically reduced from 160 to 8.4 mA/cm^(2)at a field strength of 150 kV/cm.Thus,based on the increasing entropy strategy of chemical engineering,this study focuses on enhancing ferroelectricity and decreasing leakage current,providing a promising path for the advancement of ferroelectric devices.

Reliable ferroelectricity down to cryogenic temperature in wakeup free Hf_(0.5)Zr_(0.5)O_(2)thin films by thermal atomic layer deposition

The performance and reliability of ferroelectric thin films at temperatures around a few Kelvin are critical for their application in cryo-electronics.In this work,TiN/Hf_(0.5)Zr_(0.5)O_(2)/TiN capacitors that are free from the wake-up effect are investigated systematically from room temperature(300 K)to cryogenic temperature(30 K).We observe a consistent decrease in permittivity(εr)and a progressive increase in coercive electric field(Ec)as temperatures decrease.Our investigation reveals exceptional stability in the double remnant polarization(2P_(r))of our ferroelectric thin films across a wide temperature range.Specifically,at 30 K,a 2P_(r)of 36μC/cm^(2)under an applied electric field of 3.0 MV/cm is achieved.Moreover,we observed a reduced fatigue effect at 30 K in comparison to 300 K.The stable ferroelectric properties and endurance characteristics demonstrate the feasibility of utilizing HfO_(2)based ferroelectric thin films for cryo-electronics applications.

Enhancing BiVO_(4)photoanode performance by insertion of an epitaxial BiFeO_(3)ferroelectric layer

BiVO_(4)(BVO)is a promising material as the photoanode for use in photoelectrochemical applications.However,the high charge recombination and slow charge transfer of the BVO have been obstacles to achieving satisfactory photoelectrochemical performance.To address this,various modifications have been attempted,including the use of ferroelectric materials.Ferroelectric materials can form a permanent polarization within the layer,enhancing the separation and transport of photo-excited electron-hole pairs.In this study,we propose a novel approach by depositing an epitaxial BiFeO_(3)(BFO)thin film underneath the BVO thin film(BVO/BFO)to harness the ferroelectric property of BFO.The self-polarization of the inserted BFO thin film simultaneously functions as a buffer layer to enhance charge transport and a hole-blocking layer to reduce charge recombination.As a result,the BVO/BFO photoanodes showed more than 3.5 times higher photocurrent density(0.65 mA cm^(-2))at 1.23 V_(RHE)under the illumination compared to the bare BVO photoanodes(0.18 m A cm^(-2)),which is consistent with the increase of the applied bias photon-to-current conversion efficiencies(ABPE)and the result of electrochemical impedance spectroscopy(EIS)analysis.These results can be attributed to the self-polarization exhibited by the inserted BFO thin film,which promoted the charge separation and transfer efficiency of the BVO photoanodes.

Engineering Thermoelectric Performance of α-GeTe by Ferroelectric Distortion

The rhombohedralα-GeTe can be approximated as a slightly distorted rock-salt structure along its[111]direction and possesses superb thermoelectric performance.However,the role of such a ferroelectric-like structural distortion on its transport properties remains unclear.Herein,we performed a systematic study on the crystal structure and electronic band structure evolutions of Ge_(1-x)Sn_(x)Te alloys where the degree of ferroelectric distortion is continuously tuned.It is revealed that the band gap is maximized while multiple valence bands are converged at x=0.6,where the ferroelectric distortion is the least but still works.Once undistorted,the band gap is considerably reduced,and the valence bands are largely separated again.Moreover,near the ferro-to-paraelectric phase transition Curie temperature,the lattice thermal conductivity reaches its minima because of significant lattice softening enabled by ferroelectric instability.We predict a peak ZT value of 2.6 at 673 K inα-GeTe by use of proper dopants which are powerful in suppressing the excess hole concentrations but meanwhile exert little influence on the ferroelectric distortion.

Structure,ferroelectric,and enhanced fatigue properties of sol–gel-processed new Bi-based perovskite thin films of Bi(Cu_(1/2)Ti_(1/2))O_(3)–PbTiO_(3)

Bi-based perovskite ferroelectric thin films have wide applications in electronic devices due to their excellent ferroelectric properties.New Bi-based perovskite thin films Bi(Cu_(1/2)Ti_(1/2))O_(3)–PbTiO_(3)(BCT–PT) are deposited on Pt(111)/Ti/SiO_(2)/Si substrates in the present study by the traditional sol–gel method.Their structures and related ferroelectric and fatigue characteristics are studied in-depth.The BCT–PT thin films exhibit good crystallization within the phase-pure perovskite structure,besides,they have a predominant(100) orientation together with a dense and homogeneous microstructure.The remnant polarization(2P_(r)) values at 30 μC/cm^(2) and 16 μC/cm^(2) are observed in 0.1BCT–0.9PT and 0.2BCT–0.8PT thin films,respectively.More intriguingly,although the polarization values are not so high,0.2BCT–0.8PT thin films show outstanding polarization fatigue properties,with a high switchable polarization of 93.6% of the starting values after 10^(8) cycles,indicating promising applications in ferroelectric memories.

Optimal parameter space for stabilizing the ferroelectric phase of Hf_(0.5)Zr_(0.5)O_(2) thin films under strain and electric fields

Hafnia-based ferroelectric materials, like Hf_(0.5)Zr_(0.5)O_(2)(HZO), have received tremendous attention owing to their potentials for building ultra-thin ferroelectric devices. The orthorhombic(O)-phase of HZO is ferroelectric but metastable in its bulk form under ambient conditions, which poses a considerable challenge to maintaining the operation performance of HZO-based ferroelectric devices. Here, we theoretically addressed this issue that provides parameter spaces for stabilizing the O-phase of HZO thin-films under various conditions. Three mechanisms were found to be capable of lowering the relative energy of the O-phase, namely, more significant surface-bulk portion of(111) surfaces, compressive c-axis strain,and positive electric fields. Considering these mechanisms, we plotted two ternary phase diagrams for HZO thin-films where the strain was applied along the in-plane uniaxial and biaxial, respectively. These diagrams indicate the O-phase could be stabilized by solely shrinking the film-thickness below 12.26 nm, ascribed to its lower surface energies. All these results shed considerable light on designing more robust and higher-performance ferroelectric devices.

Large Energy Capacitive High-Entropy Lead-Free Ferroelectrics

Advanced lead-free energy storage ceramics play an indispensable role in next-generation pulse power capacitors market.Here,an ultrahigh energy storage density of~13.8 J cm^(-3)and a large efficiency of~82.4%are achieved in high-entropy lead-free relaxor ferroelectrics by increasing configuration entropy,named high-entropy strategy,realizing nearly ten times growth of energy storage density compared with low-entropy material.Evolution of energy storage performance and domain structure with increasing configuration entropy is systematically revealed for the first time.The achievement of excellent energy storage properties should be attributed to the enhanced random field,decreased nanodomain size,strong multiple local distortions,and improved breakdown field.Furthermore,the excellent frequency and fatigue stability as well as charge/discharge properties with superior thermal stability are also realized.The significantly enhanced comprehensive energy storage performance by increasing configuration entropy demonstrates that high entropy is an effective but convenient strategy to design new high-performance dielectrics,promoting the development of advanced capacitors.

Synergically enhanced piezocatalysis performance of eco-friendly(K_(0.52)Na_(0.48))NbO_(3) through ferroelectric polarization and defects

Piezocatalysis has attracted unprecedented research interest as a newly emerging catalysis technology.However,the inherent insulating property of ferroelectric materials ultimately leads to the poor vibration-electricity conversion ability.Herein,this work reports the(K_(0.52)Na_(0.48))NbO_(3) ferroelectric ceramics(KNNFCx),for which the FeCo modification strategy is proposed.The substitution of the moderate amount of FeCo(x=0.015)at Nb site not only optimizes ferroelectricity but also produces beneficial defects,notably increasing Rhodamine B water purification efficiency to 95%.The pinning effect of monovalent oxygen vacancies on ferroelectric domains is responsible for the excellent ferroelectric polarization of KNNFC0.015 through the generation of an internal field to promote charge carriers separation and reduce nonradiative recombination.Importantly,the accompanying electron carriers can easily move to the material surface and participate in redox reactions because they have low activation energy.Therefore,ferroelectric polarization and defects play synergetic roles in enhancing piezocatalytic performance.

Ferroelectrically modulate the Fermi level of graphene oxide to enhance SERS response

Surface-enhanced Raman scattering(SERS)substrates based on chemical mechanism(CM)have received widespread attentions for the stable and repeatable signal output due to their excellent chemical stability,uniform molecular adsorption and controllable molecular orientation.However,it remains huge challenges to achieve the optimal SERS signal for diverse molecules with different band structures on the same substrate.Herein,we demonstrate a graphene oxide(GO)energy band regulation strategy through ferroelectric polarization to facilitate the charge transfer process for improving SERS activity.The Fermi level(Ef)of GO can be flexibly manipulated by adjusting the ferroelectric polarization direction or the temperature of the ferroelectric substrate.Experimentally,kelvin probe force microscopy(KPFM)is employed to quantitatively analyze the Ef of GO.Theoretically,the density functional theory calculations are also performed to verify the proposed modulation mechanism.Consequently,the SERS response of probe molecules with different band structures(R6G,CV,MB,PNTP)can be improved through polarization direction or temperature changes without the necessity to redesign the SERS substrate.This work provides a novel insight into the SERS substrate design based on CM and is expected to be applied to other two-dimensional materials.

Ferroelectricity of pristine Hf_(0.5)Zr_(0.5)O_(2) films fabricated by atomic layer deposition

Hafnium-based ferroelectric films,remaining their ferroelectricity down to nanoscale thickness,present a promising application for low-power logic devices and nonvolatile memories.It has been appealing for researchers to reduce the required temperature to obtain the ferroelectric phase in hafnium-based ferroelectric films for applications such as flexible and wearable electronics.This work demonstrates that a remanent polarization(P_(r))value of>5μC/cm^(2)can be obtained in asdeposited Hf_(0.5)Zr_(0.5)O_(2)(HZO)films that are fabricated by thermal atomic layer deposition(TALD)under low temperature of 250℃.The ferroelectric orthorhombic phase(o-phase)in the as-deposited HZO films is detected by scanning transmission electron microscopy(STEM).This low fabrication temperature further extends the compatibility of ferroelectric HZO films to flexible electronics and avoids the cost imposed by following high-temperature annealing treatments.

Engineering Ferroelectric Interlayer between Li_(1.3)Al_(0.3)Ti_(1.7)(PO_(4))_(3)and Lithium Metal for Stable Solid-State Batteries Operating at Room Temperature

The poor contact and side reactions between Li_(1.3)Al_(0.3)Ti_(1.7)(PO_(4))_(3)(LATP)and lithium(Li)anode cause uneven Li plating and high interfacial impendence,which greatly hinder the practical application of LATP in high-energy density solid-state Li metal batteries.In this work,a multifunctional ferroelectric BaTiO_(3)(BTO)/poly(vinylidene fluoride-co-trifluoroethylene-co-chlorotrifluoroethylene)(P[VDF-TrFE-CTFE])composite interlayer(B-TERB)is constructed between LATP and Li metal anode,which not only suppresses the Li dendrite growth,but also improves the interfacial stability and maintains the intimate interfacial contact to significantly decrease the interfacial resistance by two orders of magnitude.The B-TERB interlayer generates a uniform electric field to induce a uniform and lateral Li deposition,and therefore avoids the side reactions between Li metal and LATP achieving excellent interface stability.As a result,the Li/LATP@B-TERB/Li symmetrical batteries can stably cycle for 1800 h at 0.2 mA cm^(-2)and 1000 h at 0.5 mA cm^(-2).The solid-state LiFePO_(4)/LATP@B-TERB/Li full batteries also exhibit excellent cycle performance for 250 cycles at 0.5 C and room temperature.This work proposes a novel strategy to design multifunctional ferroelectric interlayer between ceramic electrolytes and Li metal to enable stable room-temperature cycling performance.