To increase the absorption in a thin layer of absorbing material （amorphous silicon, a-Si）, a light trapping design is presented. The designed structure incorporates periodic metal-insulator-metal waveguides to enha...To increase the absorption in a thin layer of absorbing material （amorphous silicon, a-Si）, a light trapping design is presented. The designed structure incorporates periodic metal-insulator-metal waveguides to enhance the optical path length of light within the solar cells. The new design can result in broadband optical absorption enhancement not only for transverse magnetic （TM）-polarized light, but also for transverse electric （TE）-polarized light. No plasmonic modes can be excited in TE-polarization, but because of the coupling into the a-Si planar waveguide guiding modes and the diffraction of light by the bottom periodic structures into higher diffraction orders, the total absorption in the active region is also increased. The results from rigorous coupled wave analysis show that the overall optical absorption in the active layer can be greatly enhanced by up to 40%. The designed structures presented in this paper can be integrated with back contact technology to potentially produce high-efficiency thin-film solar cell devices.展开更多
The consumption of dye-sensitized solar cells (DSSCs) used to produce hydrogen, compared with the traditional water-splitting energy, is much less. First of all it is because of DSSCs’ low cost, easy fabrication proc...The consumption of dye-sensitized solar cells (DSSCs) used to produce hydrogen, compared with the traditional water-splitting energy, is much less. First of all it is because of DSSCs’ low cost, easy fabrication process, high conversion efficiency and good stability;secondly it also solves the problem of serious corrosion of the electrode, for the entire solar system is in the air. We use three tandem dye-sensitized photovoltaic cells as a source of power;the open circuit voltage of photoelectric unit shows the feasibility of using dye-sensitized photovoltaic cell decomposition of water to produce hydrogen.展开更多
Chemical fixing of xanthene dye (eosin Y) on the surface of TiO2 electrode was carried out by modifying the electrode with silane-coupling reagent to obtain stable dye-sensitized TiO2 electrode. Such silane modificati...Chemical fixing of xanthene dye (eosin Y) on the surface of TiO2 electrode was carried out by modifying the electrode with silane-coupling reagent to obtain stable dye-sensitized TiO2 electrode. Such silane modification can not only evidently enhance the stability of dye-sensitized TiO2 electrode but also im-prove the energy conversion efficiency of the assembled cells by increasing short-circuit photocurrent (JSC) and open-circuit photovoltage (VOC). It was found that the improvements of cell performances differ depending on the composition of the electrolyte. The optimum cell of the cell performance was achieved in the electrolyte with 0.5 mol/L TBAI/0.05 mol/L I2/EC:PC(3:1 w/w), yielding JSC of 4.69 mA·cm?2, VOC of 0.595 V, fill factor (FF) of 0.64 and η of 1.78%. Different spectroscopic techniques including UV-Vis spectra, fluorescence spectra, EIS and dark current measurements were employed to derive reasonable analysis and explanations.展开更多
基金Project supported by the Postgraduate Innovation Foundation of Jiangsu Province,China (Grant No.CX09B 090Z)the Key Postgraduate Plan of Nanjing University of Science and Technology,China
文摘To increase the absorption in a thin layer of absorbing material （amorphous silicon, a-Si）, a light trapping design is presented. The designed structure incorporates periodic metal-insulator-metal waveguides to enhance the optical path length of light within the solar cells. The new design can result in broadband optical absorption enhancement not only for transverse magnetic （TM）-polarized light, but also for transverse electric （TE）-polarized light. No plasmonic modes can be excited in TE-polarization, but because of the coupling into the a-Si planar waveguide guiding modes and the diffraction of light by the bottom periodic structures into higher diffraction orders, the total absorption in the active region is also increased. The results from rigorous coupled wave analysis show that the overall optical absorption in the active layer can be greatly enhanced by up to 40%. The designed structures presented in this paper can be integrated with back contact technology to potentially produce high-efficiency thin-film solar cell devices.
文摘The consumption of dye-sensitized solar cells (DSSCs) used to produce hydrogen, compared with the traditional water-splitting energy, is much less. First of all it is because of DSSCs’ low cost, easy fabrication process, high conversion efficiency and good stability;secondly it also solves the problem of serious corrosion of the electrode, for the entire solar system is in the air. We use three tandem dye-sensitized photovoltaic cells as a source of power;the open circuit voltage of photoelectric unit shows the feasibility of using dye-sensitized photovoltaic cell decomposition of water to produce hydrogen.
基金Supported by the National Research Fund for Fundamental Key Project (Grant No. 2006CB202605)High-Tech Research and Development Program of China (Grant No. 2007AA05Z439)National Natural Science Foundation of China (Grant No. 20873162)
文摘Chemical fixing of xanthene dye (eosin Y) on the surface of TiO2 electrode was carried out by modifying the electrode with silane-coupling reagent to obtain stable dye-sensitized TiO2 electrode. Such silane modification can not only evidently enhance the stability of dye-sensitized TiO2 electrode but also im-prove the energy conversion efficiency of the assembled cells by increasing short-circuit photocurrent (JSC) and open-circuit photovoltage (VOC). It was found that the improvements of cell performances differ depending on the composition of the electrolyte. The optimum cell of the cell performance was achieved in the electrolyte with 0.5 mol/L TBAI/0.05 mol/L I2/EC:PC(3:1 w/w), yielding JSC of 4.69 mA·cm?2, VOC of 0.595 V, fill factor (FF) of 0.64 and η of 1.78%. Different spectroscopic techniques including UV-Vis spectra, fluorescence spectra, EIS and dark current measurements were employed to derive reasonable analysis and explanations.
