Modeling of Few-Mode Multi-Core Optical Fiber Channe Based on Non-Uniform Mode Field Distribution

In this paper, the influencing factors that affect few-mode and multi core optical fiber channel are analyzed in a comprehensive way. The theoretical modeling and computer simulation of the information channel are carried out and then the modeling scheme of few-mode multicore optical fiber channel based on non-uniform mode field distribution is put forward. The proposed modeling scheme can not only exponentially increases the system capacity through fewmode multi-core optical fiber channel, but has better transmission performance compared to the channel of the same type to the uniform channel revealing from the simulation results.

Wavelength switchable mode-locked fiber laser with a few-mode fiber filter

We have proposed and constructed a few-mode fiber(FMF)-based comb filter realized by dislocation splicing a fewmode long-period fiber grating(FM-LPFG) with a single-mode fiber(SMF). From an all-fiber laser with a FMF-based comb filter, the generation of switchable single-, dual-, triple-, and quadruple-wavelength continuous light has been achieved.Moreover, wavelength switchable mode-locked pulses have been obtained with the increased pump power. In the experiment, the output wavelength of the mode-locked fiber laser was changed from 1567.72 nm to 1571.04 nm, while the signal-to-noise(SNR) ratio was maintained above 61 d B. The switchable multiwavelength continuous wave(CW) and mode-locked all-fiber lasers have potentially important applications for fiber sensing, wavelength-division multiplexing(WDM) and signal processing.

Machine Learning-based Inverse Model for Few-Mode Fiber Designs

The medium for next-generation communication is considered as fiber for fast,secure communication and switching capability.Mode division and space division multiplexing provide an excellent switching capability with high data transmission rate.In this work,the authors have approached an inverse modeling technique using regression-based machine learning to design a weakly coupled few-mode fiber for facilitating mode division multiplexing.The technique is adapted to predict the accurate profile parameters for the proposed few-mode fiber to obtain the maximum number of modes.It is for a three-ring-core few-mode fiber for guiding five,ten,fifteen,and twenty modes.Three types of regression models namely ordinary least-square linear multi-output regression,k-nearest neighbors of multi-output regression,and ID3 algorithm-based decision trees for multi-output regression are used for predicting the multiple profile parameters.It is observed that the ID3-based decision tree for multioutput regression is the robust,highly-accurate machine learning model for fast modeling of FMFs.The proposed fiber claims to be an efficient candidate for the next-generation 5G and 6G backhaul networks using mode division multiplexing.

Theoretical Analysis on Inter-Core Crosstalk Suppression Model for Multi-Core Fiber

Decreasing mode coupling coefficient(κ) is an effective approach to suppress the inter-core crosstalk. Therefore, we deploy a low index rod and rectangle trench in the middle of two neighboring cores to reduce κ so that the overlap of electric field distribution can be suppressed. We also propose approximate analytical solution(AAS) for κ of two crosstalk suppression models, which are two cores with one low index rod deployed in the middle and two cores with one low index rectangle trench deployed in the middle. We then do some modification for the results obtained by AAS and the modified results are proved to agree well with that obtained by finite element method(FEM). Therefore, we can use the modified AAS to get inter-core crosstalk for abovementioned two models quickly.

Fast mode decomposition for few-mode fiber based on lightweight neural network

In this paper,we present a fast mode decomposition method for few-mode fibers,utilizing a lightweight neural network called MobileNetV3-Light.This method can quickly and accurately predict the amplitude and phase information of different modes,enabling us to fully characterize the optical field without the need for expensive experimental equipment.We train the MobileNetV3-Light using simulated near-field optical field maps,and evaluate its performance using both simulated and reconstructed near-field optical field maps.To validate the effectiveness of this method,we conduct mode decomposition experiments on a few-mode fiber supporting six linear polarization(LP)modes(LP01,LP11e,LP11o,LP21e,LP21o,LP02).The results demonstrate a remarkable average correlation of 0.9995 between our simulated and reconstructed near-field lightfield maps.And the mode decomposition speed is about 6 ms per frame,indicating its powerful real-time processing capability.In addition,the proposed network model is compact,with a size of only 6.5 MB,making it well suited for deployment on portable mobile devices.

Speckle backpropagation for compensation of nonlinear effects in few-mode optical fibers

We propose an alternative approach to compensation of intermodal interactions in few-mode optical fibers by means of digital backpropagation.Instead of solving the inverse generalized multimode nonlinear Schr?dinger equation,we accomplish backpropagation of the multimode signals with help of their near-field intensity distributions captured by a camera.We demonstrate that this task can successfully be handled by a deep neural network and provide a proof of concept by training an autoencoder for backpropagation of six linearly polarized[LP]modes of a step-index fiber.

Contactless vital signs monitoring based on few‐mode and multi‐core fibers

Few-mode and multi-core fibers are proposed and demonstrated for contactless vital signs monitoring in this paper.In-line optical fiber interferometers using few-mode and multi-core fibers are designed and offset splicing is utilized for mode excitation.Extinction ratio and insertion loss are analyzed experimentally under different offset distances.The fabricated in-line interferometers are packaged under the mattress to realize contactless vital signs signals collection.By using filtering techniques,both respiration and heartbeat signals can be recovered successfully,and respiration as well as heartbeat ratio are obtained.Mode excitation and interference are theoretically analyzed in few-mode fiber while curvature sensing experiments using multi-core fiber interferometer are performed to verify its excellent performance on vital signs monitoring.The successful demonstration on contactless vital signs monitoring makes few-mode and multi-core fibers promising candidates for healthcare applications.

Polarization Characteristics of the Deformed Low-Mode Fiber Waveguides with Polarization Conservation

In this work the results of polarization researches of low-optical fiber waveguides with conservation of polarization are presented. Obtained results quite convincingly testify regarding a high sensitivity low-mode regime of work of an optical fiber to anisotropic external influences, in comparison with one-mode regime of work of the same fibre. This result, can represent a big practical value at the realization of high-sensitivity fiber-optical devices of different physical values.

弱耦合多芯少模光纤的声波导布里渊散射特性

光纤中的声波导布里渊散射(GAWBS)可在较低光功率水平激发,该散射噪声对大容量空分复用光纤通信、数字相干传输及光量子传输影响较大。针对空分复用光纤通信系统,文章对自制弱耦合7芯4模光纤的GAWBS特性进行了理论和实验研究。结果表明,由于不同纤芯与光纤中心的距离差异,弱耦合7芯4模光纤中不同纤芯具有明显的GAWBS分布差异。未来需要在不同的纤芯中采取不同的GAWBS噪声补偿方法以实现高信噪比和低误码率的空分复用传输。

Fiber laser twist sensor with hybrid few-mode tilted Bragg grating and few-mode long period grating

A twist sensor with hybrid few-mode tilted fiber Bragg grating(FM-TFBG) and few-mode long period grating(FM-LPG) in fiber laser cavity is demonstrated. The FM-LPG is utilized to excite LP11 core mode. The FM-TFBG is used for sensing. The transverse modes at 1 553.9 nm and 1 550.5 nm are LP01 and LP21 core modes, respectively, which are coupled from forward-propagating LP11 core mode. These two excitation wavelengths have opposite variation tendencies, which participate in sensing. The twist sensitivity of 0.16 dB/° from-40° to 40° is achieved. The proposed sensor has potentially used for structure monitoring in many areas.

Crosstalk-aware RCSA for spatial division multiplexing enabled elastic optical networks with multi-core fibers

In this Letter,we propose two crosstalk-aware routing,core,and spectrum assignment(CA-RCSA)algorithms for spatial division multiplexing enabled elastic optical networks(SDM-EONs)with multi-core fibers.First,the RCSA problem is modeled,and then a metric,i.e.,CA spectrum compactness(CASC),is designed to measure the spectrum status in SDM-EONs.Based on CASC,we propose two CA-RCSA algorithms,the first-fit(FF)CASC algorithm and the random-fit(RF)CASC algorithm.Simulation results show that our proposed algorithms can achieve better performance than the baseline algorithm in terms of blocking probability and spectrum utilization,with FF-CASC providing the best performance.

Influence of Internal Stresses in Few-Mode Fiber on the Thermal Characteristics of Regenerated Gratings

The pre-treatment of few-mode fibers (FMFs) has been successfully done with CO2 laser The wavelength difference, AA between the two resonant wavelengths in the few-mode fiber Bragg grating (FMFBG) varies with temperature increment during the annealing process. The results show that the treated fibers with lower stresses have lower thermal sensitivity in △λ than that of non-treated fiber. However, the treated fibers produce FMFBGs with better thermal durability and regeneration ratio. It is conceived that the presence of those stresses in the pristine fiber is responsible for the high thermal sensitivity in △λ. The thennal relaxation of stresses and structural rearrangement during the thennal annealing process are responsible for the degradation of the strength and resilience of the regenerated grating.

A novel three-ring-core few-mode fiber with large effective area and low nonlinear coefficient

A novel three-ring-core few-mode fiber with large effective area and low nonlinear coefficient is proposed in this paper. The fiber characteristics based on the full-vector finite element method(FEM) with perfect matched layer boundary conditions show that four supermodes with large effective area, low nonlinear coefficient and low differential mode group delay(DMGD) are achieved. With the increase of input wavelength, the effective areas of three-ring-core few-mode fiber are increased, and the nonlinear coefficients are decreased. The bending losses are increased with the increase of input wavelength, and are decreased with the increase of bending radius. Moreover, the proposed fiber performs a nonlinear coefficient and DMGD flattened profile at a large wavelength range.

4.096 Tbit/s multidimensional multiplexing signals transmission over 1000 km few mode fiber

We experimentally transmit eight wavelength-division-multiplexing(WDM)channels,16 quadratic-amplitude-modulation(QAM)signals at 32-GBaud,over 1000 km few mode fiber(FMF).In this experiment,we use WDM,mode division multiplexing,and polarization multiplexing for signal transmission.Through the multiple-input-multiple-output(MIMO)equalization algorithms,we achieve the total line transmission rate of 4.096 Tbit/s.The results prove that the bit error rates(BERs)for the16QAM signals after 1000 km FMF transmission are below the soft-decision forward-error-correction(SD-FEC)threshold of2.4×10^(-2),and the net rate reaches 3.413 Tbit/s.Our proposed system provides a reference for the future development of high-capacity communication.

Mode-dependent dynamic gain of all-fiber FM-EDFA under various pump manipulation

The dynamic gain of a few-mode erbium-doped fiber amplifier(FM-EDFA)is vital for the long-haul mode division multiplexing(MDM)transmission.Here,we investigate the mode-dependent dynamic gain of an FM-EDFA under various manipulations of the pump mode.First,we numerically calculate the gain variation with respect to the input signal power,where a modedependent saturation input power occurs under different pump modes.Even under the fixed intensity profile of the pump laser,the saturation input power of each spatial mode is different.Moreover,high-order mode pumping leads to a compression of the linear amplification region,even though it is beneficial for the mitigation of the differential modal gain(DMG)arising in all guided modes.Then,we develop an all-fiber 3-mode EDFA,where the fundamental mode of the pump laser can be efficiently converted to the LP_(11)mode using the all-fiber mode-selective coupler(MSC).In comparison with the traditional LP_(01)pumping scheme,the DMG at 1550 nm can be mitigated from 1.61 dB to 0.97 dB under the LP_(11)mode pumping,while both an average gain of 19.93 dB and a DMG of less than 1 dB can be achieved from 1530 nm to 1560 nm.However,the corresponding signal input saturation powers are reduced by 0.3 dB for the LP_(01)mode and 1.6 dB for the LP_(11)mode,respectively.Both theoretical and experimental results indicate that a trade-off occurs between the DMG mitigation and the extension of the linear amplification range when the intensity profile of pump laser is manipulated.

A Novel High Sensitivity Refractive Index Sensor Based on Multi-Core Micro/Nano Fiber

A refractive index sensor based on a multi-core micro/nano fiber is proposed for low refractive index solutions. At first, the mode field distribution of the tapered multi-core fiber is analyzed with the finite element model (FEM). After that, the relationship between the refractive index sensitivity and the diameter of the multi-core micro/nano fiber is calculated. At last, four sensors with different sizes are explored, and when the taper length is 16.20 mm, the refractive index sensitivity of the sensor can reach 5815.50nm/RIU, which agrees with the theoretical analysis. The refractive index measurement error is less than 0.5 %o, which has a high practical application value. The longer the taper length is, the smaller the fiber diameter is. According to the theoretical analysis, when the fiber diameter is less than 4.864 gm, the structure sensor\ refractive index sensitivity is higher than 10000 nm/RIU. At the same time, when the sensor's taper length is 15.99 mm, its temperature sensitivity is -0.1084nm/°C. Compared with single-mode fiber, the sensor proposed here has the advantages of stability, compact structure, and high sensitivity, which has a potential in the field of seawater salinity measurement.

Applications of weakly-coupled few-mode fibers[Invited]

Space-division multiplexing(SDM)has attracted significant attention in recent years because larger transmission capacity is enabled by more degrees of freedom(DOFs)in few-mode fibers(FMFs)compared with singlemode fibers(SMFs).To transmit independent information on spatial modes without or with minor digital signal processing(DSP),weakly-coupled FMFs are preferred in various applications.Several cases with different use of spatial DOFs in weakly-coupled FMFs are demonstrated in this work,including single-mode or mode-groupmultiplexed transmission,and spatial DOFs combined with time or frequency DOF to improve the system performance.

Efficient silicon integrated four-mode edge coupler for few-mode fiber coupling

Here,we designed a broadband,low loss,compact,and fabrication-tolerant silicon-based four-mode edge coupler,composed of a 1×3 adiabatic mode-evolution counter-taper splitter and a triple-tip inverse taper.Based on mode conversion and power splitting,the proposed structure can simultaneously realize efficient mode coupling from TE_(0),TM_(0),TE_(1),and TM_(1) modes of multimode silicon waveguides to linearly polarized(LP),LP^(01,x),LP_(01,y),LP_(11a,x),and LP_(11a,y),modes in the few-mode fiber.To the best of our knowledge,we proposed the first scheme of four LP modes coupling,which is fully compatible with standard fabrication process.The 3D finite-difference time-domain simulation results show that the on-chip conversion losses of the four modes remain lower than 0.62 dB over the 200 nm wavelength range,and total coupling losses are 4.1 dB,5.1 dB,2.1 dB,and 2.9 dB for TE_(0)-to-LP_(01,x),TM_(0)-to-LP_(01,y),TE_(1)-to-LP_(11a,x),and TM_(1)-to-LP_(11a,y),respectively.Good fabrication tolerance and relaxed critical dimensions make the four-mode edge coupler compatible with standard fabrication process of commercial silicon photonic foundries.

Tunable self-seeded multi-wavelength Brillouin-erbium fiber laser based on few-mode fiber filter

A tunable self-seeded multi-wavelength Brillouin-erbium fiber laser(BEFL) is proposed and demonstrated based on a few-mode fiber filter(FMFF) with varying temperature. The FMFF configuration is a section of uncoated few-mode fiber(FMF) sandwiched between two up-tapers. As the temperature varies from 25 °C to 125 °C, the transmission spectrum of FMFF moves towards the longer wavelength. The self-excited Brillouin pump is internally achieved by cascaded stimulated Brillouin scattering(SBS) in the single mode fiber(SMF). Then employing the FMFF temperature variation characteristics in the ring cavity fiber laser, the multi-wavelength of the output laser can be tuned, and the tunable range is about 8.0 nm. The generation of up to 15 Brillouin Stokes wavelengths with 16 d B optical signal-to-noise ratio(OSNR) is realized.

基于多芯少模光纤的传输与传感应用(特邀)

基于多芯少模光纤的空分复用技术被认为是解决传统单模光纤通信容量危机的可行方案。同时,随着支撑空分复用技术的光纤器件的快速发展和逐步成熟,空分复用技术亦可以应用于多参量分布式传感,解决传统基于单模光纤的单参量传感器交叉敏感性问题。文章综述了近年来少模光纤、多芯光纤、多芯少模光纤的设计制备及测试研究,也总结了这些特种光纤在光纤传输与光纤传感上的应用进展,在此基础上,对多芯少模光纤的传输与传感应用的研究前景与方向进行了展望。